Enthusiastic Quality and Fabrication Engineer with 3 + years of experience. Seeking to use proven project management and inspection skill on advanced manufacturing excellence at ABS Engineers. Increased production efficiency by 32% at MATE structural fabrication. Lowered welding defects 28 % department-wide. Certified NDT LEVEL-II Engineer.
We’re looking for a Technology consultant to join our Team!
Bhuvaneshwaran elayaperumal
1. 1
BHUVANESHWARAN E.
Quality & Fabrication Engineer – Structures & Pressure Vessels
: bhuvaneshwaran.e@outlook.com : +971544939795
: bhuvaneshwaran.e : R3764422
: https://www.linkedin.com/in/bhuvaneshwaran-elayaperumal-561957150/
: United Arab Emirates Visit Visa
Enthusiastic Quality and Fabrication Engineer with 3 + years of experience. Seeking to use
proven project management and inspection skill on advanced manufacturing excellence at
ABS Engineers. Increased production efficiency by 32% at MATE structural fabrication.
Lowered welding defects 28 % department-wide. Certified NDT LEVEL-II Engineer.
QUALITY AND FABRICATION ENGINEER at ABS ENGINEERS (2017 – 2018 ):
Independent Manufacturer and fabricator of Heavy structures, Pressure vessels, Boilers,
Hopper & Chute, Conveyor, MS & SS - Columns, Casings & Tanks up to 50 mm thick.
PROJECTS HANDLED:
Fives Cail – KCP
Motherson Automotive Technologies and Engineering (Fabrication and Erection)
JK Tyres & Industries (Fabrication and Erection)
CEAT Limited
Amara Raja Pvt. Limited (Fabrication & Erection)
ICF- Integral Coach Factory (Indian Railways Chennai)
OPERATIONS ON QUALITY:
Non-destructive testing’s-UT,RT, RTFI & PT on Pressure Vessels, Heavy equipment.
Inspection – Raw Materials, Dimension, Welding, Testing, Preservation and Packing.
Documentation – QAP / ITP, WPS, PQR,WPQ,Inspection Reports, WorkSchedule chart.
Codes & Specification – ASME VIII, NACE, Design code, Approved Drawings, Purchase order
specification, Purchaser’s standards and NDE Procedures.
To ensure that all operations / activities related to project are executed as per requirements to
customer.
OPERATIONS ON FABRICATION:
Planning – Task Scheduling, Loading Production,Facility location, Follow up & Execution.
Procurement – Materials, Selection of Suppliers, TechnicalEvaluation, Negotiation.
To assess & ascertain, the process and intricacy involved in the fabricationworks of each project
organize resources to cater to all the requirements.
Closely monitor the project status withrespect to delivery requirements.
Carryout conclusivesupervision for every project before release of material / handling of project
to the customer.
Ensure purchase team has timely raised POwithin the projectbudget.
Monitor and achieve department objectives.
2. 2
ASSISTANT QUALITY SUPERVISOR at LARSEN & TOUBRO (2016 - 2017):
PROJECTS HANDLED:
1. SAUDI ARAMCO 4. Tecnicas and Reunidas
2. Saipem 5. Sepco
3. Hitachi 6. Petrofac
OPERATIONS:
Supervises and coordinates activities of workers engaged in inspecting incoming
materials of all projects, to adhere all inspection as per ASME standards.
Internal forging and casting inspection on valves, Conducting Third party offering on non-
destructive testings (VT, UT, RT, RTFI, MPT & PT) & Painting,.
Pre-dispatch inspection on heavy duty valves.
Document dimensional studies, Material Test Certificate, QAP/ITP, Check sheets and Offer
lists.
QC - LINE INSPECTOR at SREE CHANDRA AUTO COMPONENTS(2015-2016)
OPERATIONS:
Approves in-process production by confirming specifications.
Conducting visual and measurement tests; communicating required adjustments to
production supervisor.
Documentation -Inspection test plan- ITP, Product part approval process - PPAP,
Standard Operating Procedure - SOP, Statistical Process Control - SPC.
ACCOMPLISHMENT
Achieved 93% of pass rate on braking hubs from 72% by conducting KT (Knowledge
Transfer) classes to machine setters/ operators.
Been a trainer for valve manufacturers on inspection and testing
Increased 11% valve offering rate every month
Promoted as Fabrication Engineer – ABS Engineers
TRAININGS UNDERTAKEN:
Completed In-Plant Training in Chennai port.
Completed In-Plant Training in Marto pearl alloys Pvt. Limited.
Attended Automobile Workshop in MIT.
Industrial visit at Hindustan aeronautical LTD (HAL
SCHOLASTICS:
Bachelor of Engineering (Mechanical Engineering)
2015
RRASE college of Engineering, Anna University, Chennai
CERTIFIED ON ASNT SNT-TC 1A 2011 NDT LEVEL II (UT, RT, RTFI, MPT, LPT & VT).
Linguistic Abilities - ENGLISH HINDI TAMIL
Fluent Basic Fluent