Curriculum vitae Bassam

CURRICULUM VITAE
BASSAM ELSAYED SALEH
Gas Turbine Engines & Turbomachinery Expert
MSC, PMP, SMDE

S.Eng. BASSAM ELSAYED SALEH
Cellular: +201110861029
Email: besday1@yahoo.com
Bassamelsayed_saleh@asme.org
CAREER OBJECTIVE
As an ambitious candidate seeks for challenge, competitive role with a very fast-growing international company, I would have the honor
to enhance my career knowledge with a great reputable organization.
PERSONAL DATA
Title: Senior Engineer
Name: BASSAM
Middle Name: ELSAYED
Surname: SALEH
Gender: Male
Date of Birth: OCT. 3rd
1977
Nationality: Egyptian
Religion: Islam
Marital Status: Married W.Ch.
Blood Type: A+
CONTACT DATA
Address: 27 Zahraa Maadi-13th
District - Apartment 1001– Cairo- EGYPT
Phone : +201069698740
Cellular: +201110861029
Facebook: Bassam Elsayed Saleh
LinkedIn: Bassam Elsayed
E-mail: besday1@yahoo.com
: bassamelsayed_saleh@asme.org

Cellular: +201110861029
ACADEMIC STUDIES
B. Sc. In Aircraft Mechanical Engineering, Military Technical College, Cairo 2000
M.Sc. in Mechanical Power Engineering, Zagazig University, Faculty of Engineering, Zagazig 2018
ACCREDITED COURSES
Diploma in Fiber Optics – HEATHKIT Educational Systems – Online 2001
Environmental Management System ISO 14001 – Cairo 2002
CAE “Computer-Aided Engineering- NASTRAN– NORAN ENGINEERING” – Online 2004
Total Quality Management System ISO 9001 – Cairo 2008
Project Management Professional preparation PMP, Egyptian Engineers Syndicate – Cairo 2008
C sharp Programming language “fundamental of C#”, Information & Technology Institute, Ministry of Defense – Cairo 2012
TOEFL course and PBT, Special Studies Center, Zagazig University – Zagazig 2014
PMI-PMP®
certification, PMI –USA, Prometric test center – Giza 2019
HLP IELTS 25hr, British Council, Cairo 2019
CAREER POSITIONS
2000-2010: Officer in Egyptian Air Force as a certified Power Planet Engineer.
2010-2011: Officer in Egyptian Air Force as chief executive of Quality assurance Programs.
2011-2013: Officer in Egyptian Air Force as Squadron Chief Engineer for operation & Maintenance.
2013-2015: Officer in Egyptian Air Force as a Manager of Quality Branch for Flying Wing.
2015-2019: Officer in Egyptian Air Force as a Manager of Technical Affairs and Warehouse.

Cellular: +201110861029
RESPONSIBILITIES
Executive Positions
1. Certified Power Planet Engineer, Proficiency skill level (7)– (2000-2010)
 Evaluate, Plane and Control Maintenance for different types of A/Cs
engine (General Electric F110-GE100 training, Safran ATAR 09C, Pratt & Whitney
Canada PT6A-25C & Honeywell TFE731-2A-2A).
 Implement maintenance checks as per manuals & instructions including both components lifetime estimation and spare parts needs plan.
 Develop engine life cycle (Quality–Cost–Time-Scope) management plans based upon the general regulations of airworthiness requirements and including
costs cut plans.
 Supervise recording all operating data (hours, cycles and starting) into the logbook and develop statistical reports.
 Provide fault-isolation and troubleshooting of the different anomalies and malfunctions of engine systems.
 Monitor the health condition of the engines either digitally by (DECHM) or analog by analysis of the operation data.
 Make rounding cycle to the serviceable short stored engines to assure that all stored engine accessories are cycled.
 Failure analysis for different components, provide a suitable solution either by replacement, repair, leasing or modification.
 Implement gas path analysis and its associated compressor cleaning wash periodically to avoid gas path deterioration.
 Do spectrometric oil analysis SOAP and oil consumption.
 Develop a Failure/Defect Report or report of discrepancy (ROD) for unserviceable parts.
 Develop an action paper to any anomaly faced and raise it to the Aviation Engineers Department via the commander.
 Control spare parts ordering internally or externally and monitor the delivery cycle status.
 Do Non-destructive testing using either dye penetrant, eddy current, or ultrasonic echo.
 Do borescope inspection for internal compressor blades and/or turbine blades.
 Maintenance rework for any defected turbine blade up to permissible limits.
 Engine ground run-up and performance test either On-wing or On Test-Rig.
 Participate in test rigs calibration done by higher authority.
 Participate as a member of the EAF committee responsible for reviewing, negotiation contracts of (ATAR 09C & PT6A-25C) with AOI/ Engine Factory.
 Participate as a member of the EAF committee in PRM-Program Review Meeting with the OEM companies for the related Engines.
 Analysis of certain types of GTE components by CAE using FEM and post-processing (NASTRAN), Provide necessary modifications to ascertain the
safe operation of GTE as per ATA specifications by both 2D/3D AUTOCAD, SOLID EDGE, SOLIDWORKS.
 Project manager for establishing a Sealing Item Partial Overhaul line for ATAR 09C engine accessories “SIPO” with the available capabilities.
 Develop a technical modification for the ATAR test cell to incorporate measuring temperature of the intermediate bearing of the engine.
 Lecturer of aero-engines and propulsion syllabus in AIRFORCE ACADEMY and Military Force Technical Institute.

Cellular: +201110861029
2. Chief executive of Quality Assurance section (2010-2011)
 Lead group of internal quality auditors and inspectors to maintain all quality processes are met by following organization (Flying wing in Air Force
Academy) vision, mission and policy.
 Review and supervise the quality management plans for all processes either operation or maintenance for (A/Cs
, Engines, Equipments)
 Set the organization’s quality objectives and its periodicity, achievement plan.
 Participate in developing a Risk management plan and its response with HSE section.
 Participate in Quality Assurance programs and Internal Auditing including programs for HSE.
 Use benchmarking and brainstorming to gather any necessary data to use in any needed representation developed by the Chief Engineer.
 Act as a focal point for external and internal customer quality and compliance requirements and issues.
 Ensure an organized approach to document control including issuing, tracking, and archiving duties and ensuring timely revisions.
 Set Key Performance Indicators”KPI” in which all aspects are referred to and noticed them in the Quality Manual.
 Set all quality templates and records such as check sheets, checklists, traceability matrix, lesson learned, change request records and others.
 Evaluate the daily/ half monthly and monthly reports rose from the auditors and inspectors and set a shortlist the points to be focused prior.
 Set all quality procedures and programs in which all quality processes will act upon, ensure that all other sections are aware of those procedures
/programs and they act according to them.
 Participate in organization preparation for any external audit or competition, preparing all records and data side by side with Maintenance control section.
 Do quality checks and auditing according to the predetermined auditing review plans.
 Maintain effective communication, professional relationships with all regulatory, legislative and certification parties on matters concerning compliance.
 Set the monthly report of the quality assurance section and raise it to the chief engineer to pass it to the Aviation Engineers Department.
 Work cooperatively with other quality sections (HSE, Documentary, and Modifications) to overcome the shortage of human resources.
 Follow up of ISO 9001 standard and its editions and participate in any meeting regards the transition from one edition to the higher one.
 Study, analyze, design, and perform technical modifications at different maintenance levels including integrated kit proof as a part of the Modification
section team.
 Participate in all A/Cs
maintenance programs (SLEP-MPI-RPI…..etc.) auditing.
3. Chief Maintenance for K-8 Squadron (2011-2013)
 Project manager for site preparation and receiving a fleet of 20 A/Cs
and make them ready for flight.
 Assure daily (pre- between- post) flight inspection operations for the fleet.
 Assure periodic and unscheduled inspections for the fleet during Day & Night sorties.
 Confirm all logistics transfer to/from the warehouse locations.
 Provide regular reports of spare parts request needed for the fleet to aircraft program manager.
 Assure all Quality, Planning, HR & Training activities to be performed accurately.
 Participate in pilot’s preflight briefing and set suitable rules of engagement for each A/C.

Cellular: +201110861029
Managerial Positions
4. Manager of Quality Branch (2013-2015)
 Review all monthly quality activities reports.
 Review all quality offices (Inspection-Modification-Safety) activities and programs.
 Develop the necessary quality programs and/or procedures.
 Update the quality manual and other quality system documents and records as per latest ISO 9001
 Supervise and review the follow on plan for Fire Fighting.
 Participate periodically in the top management review meeting.
 Supervise the required Risk Management Plans and its response plans.
 Participate in Risk analysis and monitoring.
 Conceptualization for the Technical Procedures Reference of aviation engineers branch.
5. Manager of Technical Affairs and Warehouse (2015-2019)
 Review all logistics technical procedures for any change updates.
 Review all procurements regards the raw material purchased from the local market either by direct order or bidding.
 Supervise the technical affairs team in how to maintain a specific inventory limit, take the spare parts quantity under continuously monitoring for
potential necessary refill.
 Organize and control the spare parts inflow & outflow movement in the repository
 Take management responsibilities of providing security, climate control, and floor/shelf space maximization in the warehouse.
 Provide the technical affairs team with the suitable decisions to take actions regards the priority, approach, and sequence in dealing with the routine work
of the branch sections (inventory monitoring and control – governmental custody monitoring–supply imports section – RTR item section – warehouse).
 Discuss any up-normal issue regards the spare parts RTR/RFR in the PRM (Program Review Meeting) with several aircraft companies manufacturers
such (Boeing-Airbus-Dassault aviation- Catic).
 Participate in the programs manager meeting for brainstorming to arrange the priorities of the delivery status using the Nominal Group Technique, Trend
analysis, and Forecast analysis.
Additional technical activities:
1. Apply Non-Destructive Testing NDT techniques (Ultrasonic, Dye penetrant, and eddy current) for different gas turbine engine parts.
2. Analyze, evaluate and develop hydraulic circuit and maintenance for different hydraulic components.
3. Participate in airframe structure overhaul for EAF- Embraer Tucano fleet.
4. Participate in water pump selection, supplying and installation for both residential and irrigation wells.
5. Participate in an engineering team responsible for restore and upgrade of flight simulator in Air Force Academy.
6. Participate in newly aircraft proposals, and contract reviews from a technical point of view as a member of the technical decision committee.
7. Lead a team for a relocation of a combat air brigade from Cairo to Elminia, by transporting all logistics and support equipments via railway.

Cellular: +201110861029
PROFESSIONAL AFFILIATION
1. Member of Project Management Institute – PMI, 2018
2. Member of American Society of Mechanical Engineers – ASME, 2013.
3. Member of Egyptian Society of Mechanical Engineers – ESME, 2012.
4. Member of Federation of Arab Engineers – FOAE, 2011.
5. Member of Egypt Engineers Syndicate – EEA, 2001.
6. Good follower to the aviation industry magazines. (AviationWeek, Overhaul & maintenance, Aviation Maintenance, Turbomachinery,
ASME mechanical engineering magazines.MTU Aero Engines, Rolls Royce and LMS international Reports.)
SKILLS
1. COMPUTER
- Microsoft office, various applications. - C# ESSENTIALS.
- CAD systems (AutoCAD, Solid Edge, Solid Works 2D&3D). - MATLAB®
AND SIMULINK®
.
- CAE systems (NASTRAN FEMAP). - Ability to deal with most readymade software.
2. LANGUAGES
- Arabic – Native Language. - English – Fluent. - French – Little.
3. INTERPERSONAL
- Good Command & Leadership. - Good conflict facilitator.
- Very good mobility. - Good negotiator.
- Ambitious, Innovative, Motivating and Influencing.
CONFERENCES
1. International conference for astronomy science and aviation technology (ASAT-13), individually, MTC, Cairo, May 2009.
2. International conference for astronomy science and aviation technology (ASAT-16), individually, MTC, Cairo, May 2015.
3. International conference of fluid dynamics (ICFD12), Author, Le Meridian Pyramids, Giza, December 2016.
PUBLISHED WORK
1. “Steady-State Off-Design Performance of Double Spool Turbofan Engine Using SIMULINK”, ICFD12-EG-5044, Conference Paper, 2016.
2. “Are Egyptian Market ready for the Aircraft Engines Leasing Concept?”, LinkedIn Articles, 2018

Curriculum vitae Bassam

Recommended

Recommended

More Related Content

What's hot

What's hot (20)

Similar to Curriculum vitae Bassam

Similar to Curriculum vitae Bassam (20)

Recently uploaded

Recently uploaded (20)

Curriculum vitae Bassam