Radar Basic Introduction
•Download as PPT, PDF•
2 likes•1,302 views
Can Know Something About Radar Basically By an Electronics Student
Recommended
More Related Content
What's hot
What's hot (20)
Viewers also liked
Similar to Radar Basic Introduction
Similar to Radar Basic Introduction (20)
Recently uploaded
Recently uploaded (20)
Radar Basic Introduction
- 1. RADAR Today We are going to know something about RADAR. RADAR-Radio Detection and Ranging
- 2. Functions of Radar RADAR is a method of using electromagnetic waves to remote-sense the position, velocity and identifying characteristics of targets.
- 3. History of Radar Radar was developed for military purposes during W. W. II. The British and US Military used radar to locate ships and airplanes.
- 5. History of Radar During the war, radar operators found annoying blips continually appearing on the radar screen. Scientists had not known that radar would be sensitive enough to detect precipitations. Today, radar is an essential tool for predicting and analyzing the weather.
- 6. Weather Radar Weather Surveillance Radar, designed in 1957. It became the primary radar for the weather service for nearly 40 years.
- 7. Weather Radar NSSL's first Doppler Weather Radar located in Norman, Oklahoma. 1970's research using this radar led to NWS NEXRAD WSR- 88D radar network.
- 8. The expensive radar equipment is protected by the sphere shaped cover. On the inside it looks similar to this:
- 9. Two Basic Radar Types Pulse Transmission Continuous Wave
- 11. Pulse Radar Components SynchronizerSynchronizer TransmitterTransmitter Display UnitDisplay Unit ReceiverReceiver PowerPower SupplySupply ANT.ANT.DuplexerDuplexer RFOut EchoIn Antenna Control
- 12. Pulse Transmission Pulse Repetition Time (PRT=1/PRF) Pulse Width (PW) Length or duration of a given pulse PRT is time from beginning of one pulse to the beginning of the next PRF is frequency at which consecutive pulses are transmitted. PW can determine the radar’s minimum range resolution. PRF can determine the radar’s maximum detection range.
- 13. Continuous Wave Radar Employs continual RADAR transmission Relies on the “DOPPLER EFFECT”
- 14. Doppler Frequency Shifts Motion Away Motion Towards Echo Frequency Decreases Echo Frequency Increases
- 15. Continuous Wave Radar Components Discriminator AMP Mixer CW RF Oscillator Indicator OUTOUT ININ Transmitter Antenna Antenna
- 16. Pulse Vs. Continuous Wave Pulse Echo Single Antenna Gives Range & Alt. Susceptible To Jamming Physical Range Determined By PW and PRF. Continuous Wave Requires 2 Antennae No Range or Alt. Info High SNR More Difficult to Jam But Easily Deceived Amp can be tuned to look for expected frequencies
- 17. Classification by Primary Radar Mission Search radars and modes • Surface search • Air search • Two-dimensional search radars • Three-dimensional search radars Tracking radars and modes Track-while-scan
- 19. AN/SPS-49 Very Long Range Air Surveillance Radar
- 20. AN/TPS-43 The AN/TPS-43 radar system, with a 200 mile range, was the only Air Force tactical ground based long range search and warning radar for nearly two decades. Most of the AN/TPS- 43 radars are being modified to the AN/TPS-75 configuration. 3-D Air Search Radar
- 21. AN/TPS-75
- 24. Tracking Radar Tracking radars dwell on individual targets and follow their motion in azimuth, elevation,range and Doppler. Most tracking radars can follow only a single target. A few radars can track multiple targets simultaneously. An electronically steered array antenna is used so that beam positions can be moved quickly from one target to another.
- 25. Radar Performance and Frequency Bands Bandwidth The bandwidth determines the range resolution and frequency agility capabilities of the radar. Antenna For a given gain, low frequency antennas are larger than high frequency. Low frequency are favored for long-range search applications, because of the larger effective area associated with a given gain, allowing more effective capture of echoes. Transmitter In general, more radio frequency power can be produced at low frequency than at high. Receiver There is no clear choice between high and low frequencies. Propagation The attenuation at high frequency is dramatic. A given raindrop has over three orders of magnitude more scattering cross-section at X-band(10 GHz) than at L-band(1.3 GHz), producing far more clutter and signal at the higher frequency. Targets If the wavelength is long compared to the target extent, targets are Rayleigh scatterers, and have small, non-fluctuating RCS. Summary In general, the longer the range at which the radar must detect targets, the lower the frequency of the radar.
Editor's Notes
- 1. Make copies of graphic and distribute to class. 2. Synchronizer: a. Coordinates the entire system b. Determines the timing of the transmitted pulse c. Includes timers, modulator and central control. 3. Transmitter: a. Generate the pulses at the proper RF (radio frequency) for the radar. 4. Antenna: a. Receives energy from the transmitter, radiates it in the form of a highly directional beam and receives the echoes. 5. Duplexer: a. Allows one antenna to be used to transmit and receive. b. Prevents transmitted RF energy from going directly to the receiver. c. Tells the antenna to radiate or receive. 6. Receiver: receives incoming echoes from antenna, detects and amplifies the signal, and sends them to the display. 7. Display: Displays the received video to the operator. 8. Power Supply: Provides power to all the components of the system. 9. Discuss the antenna Bearing loop back to the display and its function.
- Second major type of radar. Produces a constant stream of energy. Can’t distinguish distances (range) because no interval between pulses. Can distinguish between moving and non-moving targets by using Doppler frequency shifts.
- a. Frequency expansion is the lowering of the echo frequency caused by an opening target (target moving away). DOWN DOPPLER b. Frequency compression is the raising of the echo frequency caused by the closing target (target moving closer). UP DOPPLER c. The moving of the transmitter can also cause frequency shifts (it’s relative motion that produces the effect). d. The faster the relative motion change the more the frequency shift.
- 1. Transmit/Receive Antennas. Since must operate simultaneously, must be located separately so receiving antenna doesn’t pick up transmitted signal. 2. Oscillator or Power Amplifier. Sends out signal to transmit antenna. Also sends sample signal to Mixer. (used as a reference) 3. Mixer. a. A weak sample of the transmitted RF energy is combined with the received echo signal. b. The two signal will differ because of the Doppler shift. c. The output of the mixer is a function of the difference in frequencies. 4. Amplifier. Increases strength of signal before sending it to the indicator. 5. Discriminator. a. Selects desired frequency bands for Doppler shifts. b. The unit will only allow certain frequency bands so won’t process stray signals. 6. Indicator. Displays data. Measures radial velocity or the component inbound or directly outbound. Range is not measured. 7. Filters. Used to reduce noise, used in amp to reduce sea return, land clutter, and other non-desirable targets.
- There are many different radar missions, types of radars and radar modes. This is one of radar groupings.
- It’s 2-D search radar. I guess it for azimuth search since it has a narrow azimuth beam and wide elevation beam.
- The Radar Set AN/SPS-49 is an L-band, long-range, two-dimensional, air-search radar system that provides automatic detection and reporting of targets within its surveillance volume. The AN/SPS-49(V) radar operates in the frequency range of 850 - 942 MHZ. It shows the elevation coverage of a typical air search radar.
- http://www.fas.org/man/dod-101/sys/ac/equip/an-tps-43.htm It resolves in elevation as well as azimuth. It uses multiple feeds and switches between feeds for different elevation angles. It has six stacked beams.
- Array antenna
- http://www.fas.org/man/dod-101/sys/ac/equip/an-tps-75.htm