Certificate III in Instrumentation and Control provides competencies to select, install, set up, test, fault find, repair and maintain systems and devices for measurement and recording of physical/chemical phenomenon and related process control. To learn more about the course: https://www.ausinet.com.au/cert-3-instrumentation-darwin/

1. 08 6244 2575 support@ausinet.com.au www.ausinet.com.au
UEE31220
Certificate III in Instrumentation
and Control
Scope: This qualification provides competencies to select, install, set up, test, fault find, repair and maintain systems
and devices for measurement and recording of physical/chemical phenomenon and related process control.
Entry Requirements / Eligibility: To gain entry into UEE31220 Certificate III in Instrumentation and Control
candidates are required to be the holder of an Unrestricted Electrical Licence. Candidates must be reasonably fit as
practical work involves considerable amount of physical activity. A wheelchair user or someone with significant
physical disabilities simply may not be able to fulfill the requirement of the course. Students must attach Unrestricted
Electrical Licence during enrolment so the admin staff can verify before admission to the course.
Students with relevant experience are eligible for RPL for the units marked “TBD”. The course duration will vary with
experience and successful result of RPL.
Electricians will attain credit transfer on the below core units with an * as result of holding the Unrestricted Electrical
Licence. Students who have completed UEE40420 Certificate IV in Electrical – Instrumentation or equivalent will
attain credit transfer on the below core units with a # which are also a prerequisite to enrol into the course. For
student who are not Electricians you will need to be an apprentice to an Electrician/Electrical Company who has
exposure to Instrumentation work. Consequently, all the below units will have to be completed in full and the fees for
each unit will apply in full. The duration will go up to 3 years

2. 08 6244 2575 support@ausinet.com.au www.ausinet.com.au
Fees:All courses are
charged a set rate per
AHC, depending on the
course as it may include
a range of electives. See
Fees on Website, $17
AHC rate or 4.50 AHC rate
for RPL
Credit Transfer
Ausinet, as a Registered
Training Organisation
(RTO), recognises the
Australian Qualifications
Framework qualifications
and Statements of
Attainment issued by any
other Australian RTO. You
are encouraged to submit
requests for credit from
previous studies when
enrolling to ensure that you
are not enrolling in units
you may not need to
undertake. If you have
completed units at other
RTO and you think they
may count towards the
award requirements of the
course you are enrolled in
at Ausinet, submit an
official copy of your results
for the units you have
undertaken. Credit transfer
may fast-track your course.
RPL
Recognition of prior
learning, also referred to as
RPL, is the formal
acknowledgement of a
person's current skills and
knowledge experience
gained throughout life –
regardless of how they have
been acquired.
This is an important
assessment pathway,
particularly for people who
are considering doing
study. The recognition
gained may considerably
reduce the study time
needed to get a
qualification.
The RPL assessment may
include workplace
observation, interviews and
professional conversations,
work samples and
documented
evidence.Please contact the
office for an RPL kit.
Completion
requirements
The requirements for
granting this qualification
will be met when
competency is
demonstrated and achieved
for:
All the Core competency
standard units, defined in
the Core Competency
Standard Units table above
and a combination of
Elective competency
standard units to achieve a
total weighting of 140
points in accordance with
the Elective Competency
Standard Units table above
Payment method – Direct
Transfer
Account Name – Australian
Institute of Electro
Technology
Bank – ANZ
BSB – 014 295
Ac Number – 457 112 723
Delivery Location
Brisbane: 117 Victoria
Street, West End, QLD
4101
Darwin: 11/41 Sadgroves
Crescent, Winnellie, NT
0820
Hours of Operation
Please check our website
for opening hours
Duration: 2 weeks to 2
years. Varies with
Experience and RPL
Code Unit of Competency/Unit Name
Weighted
Points
CT/TBD
Core Units
UEECO0009 Participate in instrumentation and control work and competency development activities 60 TBD
UEECD0007 Apply work health and safety regulations, codes and practices in the workplace 20 CT
UEECD0019 Fabricate, assemble and dismantle utilities industry components 40 CT
UEECD0043 Solve problems in direct current circuits 80 CT
UEECD0020 Fix and secure electrotechnology equipment 20 CT
UEECD0051 Use drawings, diagrams, schedules, standards, codes and specifications 40 CT
UEECD0045 Solve problems in multiple path extra-low voltage (ELV) a.c. circuits 40 TBD
UEECD0016 Document and apply measures to control WHS risks associated with electrotechnology work 20 CT
UEEIC0047 Use instrumentation drawings, specifications, standards and equipment manuals 40 CT
UEEIC0041 Solve problems in pressure measurement components and systems 40 CT
UEEIC0038 Solve problems in density/level measurement components and systems 40 CT
UEEIC0039 Solve problems in flow measurement components and systems 40 CT
UEEIC0043 Solve problems in temperature measurement components and systems 40 CT
UEEIC0029 Set up and adjust PID control loops 40 TBD
UEEIC0023 Install instrumentation and control cabling and tubing 20 TBD
UEEIC0022 Install instrumentation and control apparatus and associated equipment 20 TBD
UEEIC0030 Set up and adjust advanced PID process control loops 40 TBD
UEEIC0021 Find and rectify faults in process final control elements 40 TBD
UEEIC0048 Verify compliance and functionality of instrumentation and control installations 40 TBD
UEEIC0031 Set up and configure human-machine interface (HMI) and industrial networks 60 TBD
UEEIC0013 Develop, enter and verify discrete control programs for programmable controllers 60 TBD
UEERE0001 Apply environmentally and sustainable procedures in the energy sector 20 TBD
UEERL0004 Disconnect - reconnect electrical equipment connected to low voltage (LV) installation wiring 60 TBD
Elective Units
UEECS0033 Use engineering applications software on personal computers 40 TBD
UEEIC0046 Troubleshoot process control systems 60 TBD
UEEIC0004 Calibrate, adjust and test measuring instruments 40 TBD
CT represents Credit Transfer, TBD represents To Be Delivered