CPD_B_F_training-brochure_2021_avgust-free.pdf

Building
Facilities
Work Practices
www.metrel.si Academy
EDISON
Competencies
by Academy
METREL
Related to
Safety & Quality

Metrel is a partner of the EDISON Educational Consortium, which provides and operates
in accordance with the requirements of ISO/IEC 17024.
Transparent development and maintenance of knowledge catalogs is the basis for
accredited Certification of Professional Qualifications (CPQ).
A structured approach ensures integrity and quality active learning to achieve accredited
points in Continuing Professional Development (CPD).
RESPONSIBLE CARE FOR ELECTRICAL SAFETY AND QUALITY
ResponsiblecareforelectricalsafetyandqualitysuggestedthroughwidespectresofIEC
standardizationininteractiveformcouldbringyoutheanswerto–what,whoandwhen.
WHAT
• Categories of buildings under initial or periodic inspection & predictive maintenance.
• Examples of a constructed building and its purpose with field implementation.
• Tags of the complexity of the installed installations or equipment.
WHO
• Responsibility transferred between employer and employee or to qualified
competent person for inspection & maintenance.
WHEN
• Theperiodicity of audits, inspections and maintenance.
Building Facilities Related Safety & Quality
Inspector of Electrical Energetic Systems Safety of
ee , ex , es , e2 , em , ms , lps.
working places, machines, equipment safety ex explosive areas installations
Inspector of Low Voltage Electrical Safety of es , e2 , em , lps. fire hazards safety, emergency lighting e2 two wires old type of installations
Qualifications of Inspections & Competences, for the
purpose of auditing and local regulation.
explosion hazards personnel competences em electrical installations in mobile units
Electrical Safety Maintainer / (O) Owner or Operator of
es, e2, em, lps, equipment. ee electrical energetic installations safety ev electrical vehicle supply equipment
lightning protection system es electrical installations safety of buildings ms medical installations safety
Ensuring electrical safety & quality and lightning protection of electrical energetic systems, installations of buildings and structures,
safety of machinery, equipment and devices is crucial for both living and working environment. This training provides integrated sets
of skills for work execution, construction, management, inspections and maintenance, where certification of professional qualification
CPQ or continuous professional development CPD points can be obtained by individual sets or for the whole.
With optional examinations after the completion of an individual set of knowledge, the candidate checks the knowledge and proves
his / her qualification and responsibility, thus gaining twice the number of CPD points.
Symbol glossary Follow the link to Facilities on eedison.eu
Icone Object Responsible
Person
Initial Inspection Shorter 1 y 2 y 3 y 4 y 5 y 6 y 8 y Longer
opis
es ex es
ee ee
WHAT WHO WHEN
facilities icons
ees – electrical energetic instalations or lps – lightning protection system
es - electrical instalations without energetics cc – complex constructions and buildings

WHAT CANDIDATES ARE LEARNING AND WHY?
Knowledge consists of an electrical safety program in conjunction with job safety
planning and briefing that directs activity appropriate to the risk associated with
electrical hazards.
Highest level of knowledge
for inspections in buildings
with electrical energetic
installations.
Used for first and periodic inspection
according to different regulative for the
most demanding electrical energetic
installations, for grounding systems and
lightning protection systems.
Application:
• Electrical energetic inspectors
• Consulting contractors
• Construction, installation and main-
tain contractors
General level of knowledge for
inspections in buildings with
classic type of installations.
Used for first and periodic inspection
according to low voltage directives and
standardisation for the most electrical
installations and lightning protection
systems for living.
Application:
• Electrical safety inspectors
• Building facility maintanance
contractors
Specific knowledge for
competencies in buildings,
working places, special
installations and locations.
Usedforcompetenciesandqualifications
onworkingplaces,jobbriefingandperiodic
auditingaccordingtoseveralregulations
forriskmanagementandemployer–
employeetransferofresponsibilities.
Application:
• Leading engineers and operators in
energetic installations
• Supervisors, contractors, designers,
maintainers
Professional qualifications in the field of electrical safety and quality assurance
within the EDISON consortium relate to one or more competencies performed
by one person in the context of their employment or workplace. Professional
qualifications are intended for individuals who want to grow professionally and
increase their employment opportunities, as well as for employers who are aware
of the importance of properly trained employees.
Short questionnaire helps candidates to identify what competencies and skills suit
to their jobs to identify training requirements, audits and exams to verify qualified
person at intervals not exceed 3 years.
Many industry sectors are targeted through this training course. The entire course of
the electrical safety and quality program is a combination of different skills, where
it is possible to obtain CPQ and / or CPD points by individual sets or for the whole.
With the pass of exams after the completion of an individual set of knowledge, the
candidate checks the knowledge and proves his / her competence and responsibility,
thus gaining double the number of CPD points.
Electrical Energetic Systems
Buildings & Objects Facillities
Construction Sites
Manufacturing industries
Electrical Equipment
Transportation Systems
Mobilic Units & Emergency & Vehicles

Follow the link to Questionnaire/eedison.eu




INTRODUCTION
Trainings and seminars are led by
experts and product managers
organized within the Academy METREL
team. Our leading lecturer is an active
creator of the knowledge in the
field of electrical safety and quality.
Lecturers are also active partners of
the NNELI Committee (Low Voltage
Safety of Electrical Installations) at
the Electrical Engineering Association
of Slovenia, accredited certifiers and
examiners for practical and technical
knowledge in the process of national
qualification and registered trainers in
the certification scheme of the EDISON
consortium.
Members of the Akademy@METREL®
team are product managers in the
development procedures of test
and measurement methods. They
participate in the development of
expertise in acquiring qualifications,
competencies and certification in
the EDISON consortium partnership
scheme. They are members of several
national electrical safety committees
and members of technical committees
at the Association for standardization.
They are also technical advisers
to ministries for the development
of special regulations and work
guidelines. They participate in the
preparation of individual industrial
applications and solutions in testing,
measuring, inspecting and control of
electrical safety and quality.

EXPERTISE AND KNOWLEDGE PROVISION
Training program include elements to consider inspection, supervision and
condition of predictive maintenance for electrical installations, electrical
equipment and electrical systems.
Active online seminars, training courses, practical exercises and guides were
developed over the years of fieldwork. Cooperation and participation in technical
committees, working groups for development of standards, electrical safety
boards, sectoral associations, universities, industries and inspections helped us to
prepare quality content.
Our trainers are experts in several field works, solutions and applications, familiar
with international regulations and standards in the field of electrical safety and
quality assurance, measurement methods, procedures and inspections.
ELECTRICALENERGETICSRELATEDSAFETYANDQUALITYWORKPRACTICES
The course was developed for the purpose of ensuring safety and quality in
electrical energetic and industrial power systems, power networks and facilities,
buildings and structures during construction, use, maintenance, inspections and
control during operation.
Competences cover knowledge that is regularly used in the work of leading
engineers as well as contractors, supervisors, designers, workers and employees
in the environment of electricity networks, generators, transmission and
distribution systems, substations, transformers, pylons, installations above 1 kV,
energetic cables and switchboards.
The title of the course covers several work practices summarized in several
competencies and sub-competencies. The learning process is adaptable to the
needs of the candidates, and mainly corresponds to two hours of intensive
training for the effective transfer of knowledge for an individual competence. The
participant of the course can choose only individual competencies or gain all the
knowledge to acquire or maintain a professional qualification.
Apply for a separate competency to be invited to the course when it is scheduled
for the next period within the next two months.
Regardless of the training schedule, there is always a process of checking
knowledge and certification of competence in proof of continuous maintenance
of professional qualifications CPQ and obtaining immediate CPD points when
you have already acquired the necessary professional skills, knowledge and
competencies.
Any questions you wish to receive answers during each seminar or training can be
sent in advance immediately after registration or at the end of the training.

ELECTRICAL SAFETY COMPETENCES – CATALOGUES OF KNOWLEDGE TO
STANDARDS & ONLINE EXAMINATION
Employer/EmployeeJobBriefing &Planning
• ADK: D-5/012 ESH:ElectricalSafety&Health in theWorkplace
(Adjustable to Regional Regulation)
LowVoltageElectricalInstallations&Working Places
• ADK: D-5/008 LV Energized: Low Voltage Energized
(Restricted Approach Permit)
• ADK:D-5/007LVLockTag:Low VoltageLockout&Tagout
(Limited Approach Permit)
LowVoltageElectricalandLightning/Buildings/ObjectsInstallations
• ADK: D-5/164 EISinsp:Low VoltageElectricalInstallationSafety Inspector
(IEC / EN 60364-6)
• ADK:D-5/106EISc:LowVoltageElectricalInstallation forContractors&Maintainers
(IEC / EN 60364)
• ADK: D-5/105 LPSinsp: Lightning Protection SystemsInspector
(IEC / EN 62305)
• ADK: D-5/104 LPSc: Lightning Protection SystemsforContractors&Maintainers
(IEC / EN 62305)
• ADK: D-5/919PQA:PowerQualityAnalyzing &Reporting
(SIST EN 50160 & IEEE 519)
• ADK: D-5/712PVV:Photo VoltaicInstallationsSafety/Quality
(SIST HD 60364-7-712)
ElectricalMachines/Appliances/Switchboards/Equipment/Devices
• ADK: D-5/439 ESB:ElectricalSwitchboardsSafety
(IEC / EN 61439-1)
• ADK: D-5/204 MST:MachinesSafetyTesting
(IEC / EN 60204-1)
• ADK: D-5/274 AWE:ArcWelding EquipmentSafety
(IEC / EN 60974-4)
• ADK: D-5/235 PAT:PortableAppliancesSafety
(IEC/EN 60745/60335-1 & VDE 701/702 & SIST EN 50678)
MobileUnits/Vehicles/ElectricCars/ModifiedVehicles/EmergencyVehicles/MobileHomes
• ADK: D-5/702 EVSE:ElectricalVehicleSupplyEquipmentSafety
(IEC / EN 62572, SIST HD 60364-7-722)
• ADK: D-5/707 eMOB:ElectricalLVInstallationsin MobileUnits
(IEC / SIST HD 60364-7-717)
MedicalInstallationsandLocations/MedicalElectricalEquipmentandAppliances
• ADK: D-5/601 MEDe:MedicalElectricalEquipmentSafety
(IEC / SIST EN 62353)
• ADK: D-5/710 MEDi:MedicalandSurgeryRoomsElectricalInstallationsSafety
(SIST HD 60364-7-710)

TRAINING EQUIPMENT FOR LOW VOLTAGE ELECTRICAL SAFETY
Application Training Corner MI 3399 is a electrical safety of low voltage systems inspection, maintenance and contractors training
facility platform. It simulates real low voltage electrical installation, special electrical installations for medical and vehicle systems,
grounded and ungrounded TN / TT / IT systems, Earthing points, LPS lightning protection system, three phase voltage and power
quality situations, PAT portable appliance and machine training module, photovoltaic training module and much more. Major
elements like fuses, RCD protection switches, outlets etc. are incorporated.
The board is designed to be used in training centres, offices, seminar / show room platforms and middle / high level electrical
schools in order to improve practical and theoretical knowledge and certify competencies of the candidates. Simulation of possible
errors of installation bring the know-how about troubleshooting, maintaining, and on how to carry out different measurements of
electrical safety in different installations.

JOB PLANNING & BRIEFING;
EMPLOYER – EMPLOYEE TRANSFER OF RESPONSIBILITIES
SafetyFirst
• Job briefing checklists, electrical safety guides, handbooks, exercises, posters
and charts
• Personal protection equipment, dielectric gloves and shoes, insulated tools and
accessories
• Electrical equipment with barriers and safety protection, protected trip-out of
building installation
ADK: D-5/012 ESH: Electrical Safety & Health in the Workplace
(Adjustable to Regional Regulation)
Work with electricity and electrical safety & health in the workplace
Certification will be prepared in cooperation with employer where several
restrictions and job evaluations need to be defined in advance. Application form
document could help with Employer – Employee Job Briefing & Planning for proper
approach to energised or lockout tagout procedures.
Annual supervisory and every 3 years audit must be documented
Requirements shall apply to every employer and any of his employees who supervises or
manages the use of work equipment to have received adequate training for purposes of
Health and Safety, including training in the methods which may be adopted when using
the work equipment, any risks which such use may entail and precautions to be taken.
ELECTRICAL SAFETY & HEALTH IN THE WORKPLACE
Electrical Safety & Health in the Workplace (Adjustable to Regional Regulation) coded
under ADK: D-5/012 ESH is covering any type of work with electricity, working places in
electrical energetic environment as well as low voltage installations.
LOW VOLTAGE ENERGIZED
LowVoltageEnergized–RestrictedApproachPermitcodedunderADK:D-5/008LV
Energizediscoveringresponsibilitiesandjobsofemployeesworkingwithelectricityduring
inspection,test&measurement,control,design,maintainorsuperviseoflowvoltage
installationsinbuildings,objects,electricalequipment,devices,machines,switchboards
andappliances.Thistypeofcertificationisrecommendedforelectricalengineers,electrical
safetyinspectorsandmaintainersorworkersinresearchanddevelopmentpositions,
testingplaces,calibrationandadjustmentlaboratories,services,productionlinesetc
whereverworkerscamecloseorwithinpossibletouchwithelectricity.
LOW VOLTAGE LOCKOUT & TAGOUT
LowVoltageLockout&Tagout–LimitedApproachPermitcodedunderADK:D-5/007
LVLockTagiscoveringresponsibilitiesandjobsofemployeesworkingclosetoelectricity
onworkingplacesofproducersandmanufacturersofelectricalequipment,devices,
machines,switchboardsandappliances.Thistypeofcertificationisrecommendedforany
nonelectricalbackgroundworkerswho’sworkissupervisedthroughLockoutTagoutrules
andlimitedapproachtotheirjobs.lockouttagoutrulesandlimitedapproachto theirjobs.
Arc Flash Boundary
Limited Approach Boundary
Limited Space
Anypointonanexposed,energized
electricalconductororcircuitpart
Restricted Space
Restricted Approach Boundary

ESH: Electrical Safety & Health in the Workplace
(ADK: D-5/012)
Employer shall ensure that all persons who use the work equipment and any of his
employees who supervises or manages the use of work equipment have received
adequate training for purposes of health and safety, including trainings on methods
of using this equipment and nd warnings about the risks associated. The knowledge
is focused on assuring of safety conditions and protection against electrical shock.
Several procedures and methods are explained for electrical safety in workplace.
Only trained personnel can achieve the competence to work in electrical safety and
quality assurance.
Candidate receives higher personal responsibility, capability, competency and
capacity for the purpose of receiving and performing a specific job or contract. The
responsibility of the candidate is to make correct reporting, marking, acting and
informing appropriately.
AREAS OF APPLICATION
• Health and safety at work, safe work areas, work practices.
• Practical safeguarding of employees.
• Safety-related maintenance requirements.
• Administrative controls for employee workplaces.
• Safe operation of electrical equipment.
• Electrical safety program and risk assessment procedures, hazard identification,
risk to employees, audits and trainings.
• Shock protection approach boundaries and working distances.
• Lockout – Tagout rules in order, zesting for de-energized state in order or
energized electrical work permit.
REGULATION, LITERATURE AND STANDARDS
• PUWER – Provision and Use of Work Equipment Regulations
• NFPA 70E – Standard for Electrical Safety in the Workplace
• EN 50110 – Operation of electrical installations
• EN 50522 – Earthing of power installations exceeding 1 kV a.c.
• EN 50191 – Erection and operation of electrical test equipment
• Handbook Electrical Safety & Health in the Workplace, Academy@Metrel
SAFETY FIRST
Health&Safetyat Workwith Electricity
• Use of personal protection equipment
• Use of electrical equipment and barriers
• Accessiblelifepartsandlimitsofapproach
Employer/EmployeeResponsibilities
• Lockout / Tagout
• Five safety steps
• Work permit when energized
JobBriefingandPlanning
• Identify hazards
• Ask
• Check
• Know
• Think
• Likelihood of occurrence
• Prepare for emergency
PROCEDURES TO ASSURE
ELECTRICAL SAFETY & QUALITY
PROGRAM
Shock Risk Assessment
Arc Flash Risk Assessment
Energized Electrical Work Permit
Safe Work Audit – Lockout & Tagout
Programs
• Health & Safety at work
• Employer responsibilities
• Employee responsibilities
• Adopted methods when using
work equioment
• Risk which such use may entail
• Precautions to be taken
• Mandatory and permissive rules
• Job safety planing
• Energized electrical work permition
informed
• Approving equipment, materials,
installations and procedures
• Quality electrical safety management
system
• Quality incident investigation
• Quality incident investigations
refered to:
- document leading lagging
indicators,
- close calls or near miss,
- electrical and other hazards …
Evaluation of Results
• Find the PASS / FAIL / LIMIT values
• Compare results with the limits
• Make the decision
Act and Inform Appropriately
• Report the results
• Mark the equipment accordingly
• Enabling of further use when PASS
• Rejecting the usage when FAIL
• Inform and transfer the responsibility
Electrical Safety Program
• Stay qualified
• Reduce the associated risks
• Distinguish exposed energized
situations
• Approach distance
• Annual supervisory
• Every 3 years audit

EISinsp: Low Voltage Electrical Installation Safety Inspection
(ADK: D-5/164)
The knowledge is focused on assuring of the Safety for Low Voltage Electrical
Installations through Initial Verification and Periodical Inspection regularly.
Earthing system recognising, basic and additional protection manners taken,
test and measuring methods used and appropriate reporting can limit the risks
as low as reasonably practicable. Checklist for the compliance of the complete
building, all electrical and other installations shall be inspected, evaluated and
reported. Use of Safety Installation Tester is a part of the training. Candidate
receives the knowledge on evaluated parameters, the limits suggested from the
standard and the examples of PASS or FAIL results.
• Requirements for initial and periodic verification of an electrical installation.
• Inspection and testing, of an electrical installation to determine, as far as reasonably
practicable, whether the requirements of the other parts of IEC 60364 have been
met.
• Inspection and testing, determine, as far as reasonably practicable, whether the
installation and all its constituent equipment are in a satisfactory condition for use.
• IEC / HD 60364-6 Low Voltage Electrical Installation Safety: Part 6 Verification.
• Handbook with Exercises ˝ Low Voltage Electrical Installation Safety˝, Academy@
Metrel
• Chart ˝Guide through Verification on Low-voltage electrical Installations˝, Academy@
Metrel
• Electrical Inspector’s Guide, Academy@Metrel
PRACTICAL KNOWLEDGE WITH
MEASURING METHODS AND
PROCEDURES
Inspections, Tests & Measurements
• Type of Voltage System
• Type of Earthing system
• Visual Inspection
• Inspection@Distribution Board
• Inspection@Circuits
• Wire Crossections
• SPD protection connectivity
• Continuity and Equalization Testing
• Insulation Resistance Measurement
• Leakage Current DIFF / PE
• Automatic Tripout Ability
• Z / Isc / Fuse protection evaluation
• RCD and PRCD testing tripot time and
Current
• Functional Checking and Power
Consumption Evaluation
• Harmonics by Components and THD
EvaluationofResults
• Compare results to the limit
• Bring the decision
ActandInformAppropriately
TroubleshootingandMaintenance
• Voltage presence, Loads Connected /
Disconnected
• Turn ON and Emergency Disconnect
• Leakage Current checking
• RCD tripout checking

EISc: Low Voltage Electrical Installation Safety for Contractors and
Maintainers (ADK: D-5/106)
The knowledge is focused on assuring of the Safety for Low Voltage Electrical
Installations through Initial Verification and Periodical Inspection regularly.
Basic and additional protection manners taken, test and measuring methods
used and appropriate reporting can limit the risks as low as reasonably
practicable. Checklist for the compliance of the complete building, all
electrical and other installations shall be inspected, evaluated and reported.
Candidate receives the knowledge on Safety steps during Maintenance
procedure, basics about the limits suggested from the standard and the
examples of PASS or FAIL results.
• Building Facility Management for Electrical Safety in Buildings during Construction,
• Before Use and through Maintaining Periods.
• Requirements for initial and periodic verification.
• Demand for the inspection and test regularly, periodically, after modification or
change.
• Demand for determine, whether the installation and all its constituent equipment
are in a satisfactory condition for use.
• Chart ˝Guide through Verification on Low-voltage electrical Installations˝,
Academy@Metrel
PROCEDURES
• Type of Earthing System
• Visual Checking
• AutoTest@Distribution Board
• AutoTest@Circuits
• SPD protection connectivity
• Continuity and Equalization Check
• Insulation Resistance Check
• Leakage Current DIFF / PE
• Z / Isc / Fuse protection Check
• RCD and PRCD tripot Check
• Functional Checking and Power Loads
Check
EvaluationofResults
• Voltage presence, Loads Connected /
Disconnected
• RCD tripout checking

LPSinsp: Lightning Protection of Buildings Inspection
(ADK: D-5/105)
Theknowledgeisfocusedon assuring of theLightning ProtectionofBuildingsor
Objects throughInitialVerification andPeriodicalInspectionregularly.Basicand
additionalprotectionmannerstaken,insidebuilding andoutsidebuildingprotection,
SPDprotection,testandmeasuring methodsusedandappropriatereportingcan
limittherisksaslowasreasonablypracticable.Checklistforthecomplianceofthe
completebuildingprotection,allelectricalandotherinstallationsshallbeinspected,
evaluatedandreported. Useof Lightning SystemInstallationTesterisapartofthe
training.Candidatereceivestheknowledgeon evaluatedparameters,thelimits
suggestedfromthestandardandtheexamplesof PASSorFAILresults.
• Requirements for initial and periodic verification of Lightning Protection Systems.
• Inspection and testing regularly, periodically, after modification or change.
• Inspection and testing, determine, as far as reasonably practicable, whether the LPS
system and all its constituent equipment are in a satisfactory condition for use.
• IEC / EN 62305 Lightning Protection of Buildings
• Handbook with Exercises ˝ Low Voltage Electrical Installation Safety˝, Academy@
Metrel
Metrel
PROCEDURES
• Type of Building and Level of Protection
• Type of protection fort he Equipment
• Visual Checking
• Inspection@Distribution Board
• SPD connectivity and SPD testing
• Continuity and Equalization testing
• Earthing Resistance Measuring
• Conductive loops Measuring
• Continuity and Earth Bonding testing
• Safety Distances and Insulation testing
EvaluationofResults
• LPS Presence
• SPD Presence
• Dangerous Voltage presence
• Corrosion or bad contacts

LPSc: Lightning Protection of Buildings for Contractors and Maintainers
(ADK: D-5/104)
The knowledge is focused on assuring of the Lightning Protection of Buildings
or Objects through Initial Verification and Periodical Inspection regularly. Basic
and additional protection manners taken, inside building and outside building
protection, SPD protection, test and measuring methods used and appropriate
reporting can limit the risks as low as reasonably practicable. Checklist for the
compliance of the complete building protection, all electrical and other installations
shall be inspected, evaluated and reported. Candidate receives the knowledge on
Maintenance procedure, basics about the limits suggested from the standard and
the examples of PASS or FAIL results.
• Building Facility Management for Lightning Protection Systems during Construction,
Before Use and through Maintaining Periods.
• Requirements for initial and periodic verification.
• Demand for the inspection and test regularly, periodically, after modification or
change.
• Demand for determine, as far as reasonably practicable, whether the LPS system
and all its constituent equipment are in a satisfactory condition for use.
• IEC / EN 62305 Lightning Protection of Buildings
Metrel
PROCEDURES
• Type of Building and Level of
Protection
• Type of protection fort he Equipment
• Visual Checking
• Checking@Distribution Board
• Continuity and Equalization check
• Earthing Resistance check
• Conductive loops check
• Continuity and Earth Bonding check
• Safety Distances and Insulation check
EvaluationofResults
• LPS Presence
• SPD Presence
• Dangerous Voltage presence
• Corrosion or bad contacts

PQA: Power Quality Analyzing & Reporting
(ADK: D-5/919)
The knowledge is focused on certification and assuring of the quality of the voltage,
current and phase angle recording over standardised period of time, calculate
hundreds of parameters according to IEEE 1448, IEEE 1459, IEEE 519, IEC 61000
series, EN 50160 and several other with reporting accordingly. Certified candidate
is qualified to recognise faults and bad conditions as well as confirm good quality
of the system. Use of Class A or Class S test equipment, recognise and select
the proper type of equipment and accessories, evaluate the accuracy of results
and PASS or FAIL barriers. The responsibility of the candidate is to make correct
reporting, marking, acting and informing appropriately.
• Automatic Voltage and Power Quality Analysis according to EN 50160 with PASS /
FAIL limit evaluation, including flickers and harmonics;
• IEEE-519 Recommended Practice and Requirements for Harmonics Control in
Electric Power Systems report creation;
• Energy Demand report creation;
• Power quality standard IEC 61000-4-30 Class A. Predefined recorder profile for EN
50160 survey;
• Use of Troubleshooting and Maintenance Tool to discover voltage sags,swells
and dips, RVC evaluation, resonant states, Power Factor evaluation, high neutral
conductor currents in 3-phase systems, asymmetry, voltage unbalance, inrush
currents, transients;
• Compare the results simultaneously for evaluate operating of filtering systems,
power correction equipment, over voltage protection and UPS systems;
• Use of Power Quality Negotiating Tool;
• Download, view and analyse with PowerView PC SW of functionalities needed for
evaluation of power quality phenomena and creation of complex reports.
• IEEE 519 Reporting and evaluating of the results
• EN 50160 Voltage quality reporting and evaluating of the results
• IEC 61000-4-30/-7/-15 – Power quality measurement methods, testing and
measurment techniques
• Handbook with Exercises ˝ Low Voltage Electrical Installation Safety˝,
Academy@Metrel
PROCEDURES
• Automatic Voltage and Power Quality
Analysis according to EN 50160 with
PASS / FAIL limit evaluation, including
flickers and harmonics;
• IEEE-519 Recommended Practice and
Requirements for Harmonics Control in
Electric Power Systems report creation;
• Energy Demand report creation;
• Power quality standard IEC 61000-4-30
Class A. Predefined recorder profile for
EN 50160 survey;
• Use of Troubleshooting and Mainte-
nance Tool to discover voltage sags and
swells, resonant states, high neutral
conductor currents in 3-phase systems,
asymmetry, transients;
• Compare the results simultaneously for
evaluate operating of filtering systems,
power correction equipment, over volt-
age protection and UPS systems;
• Use of Power Quality Negotiating Tool;
EvaluationofResults
• Work close to energised objects
• Hi Voltage presence Checking
• Tracing of transients
• Harmonics and THD, Filters evaluation
• Currents, Voltages and Phase angle

PVV: Photo Voltaic Installations Safety/Quality
(ADK: D-5/712)
PROCEDURES
• TypeofVoltageSystem
• TypeofEarthingsystem
• VisualInspection
• FaultConditionsandpermissibletouch
voltageevaluation:
• Linetogroundcasesituations
• RCDprotectiontypeB
• Automatictrip-outevaluation
-Short-CircuitCurrents
-Fusecharacteristicsevaluation
• ContinuityandEqualizationTesting
• EarthingandGroundingMeasuring:
-EarthResistanceMeasurement
2/3/4wiretestmethod
-Groundloopstestingwith2clamps
method
• SPDprotectiontesting
• InsulationResistanceMeasurement
• Leakagecurrenttesting
• Basicparametersevaluation
-Iscshortcircuitcurrent
-Uopopenloopvoltage
-InsulationRoc+,Roc-,Rsc
• STCmeasurementandqualityevaluation
-Panelcharacteristic
-Stringcharacteristic
• Invertormeasurement
-MPPmaximalpowerpointtracker
-PoweronDCstringcomparedwith
ACoutput
-Efficiencyonsingle1finvertor
Troubleshooting and Maintenance
• Work close to energized objects
• Voltage presence Checking
• Leakage Current AC or DC
• Earth Bonding and Main protection
evaluation
• Find Faults and potential dangerous
Theknowledgeisfocusedon evaluating safetyandquality ofthephoto-voltaic
systems.Theparametersof thepanelsandthestrings,quality anddegradation
parameters,measuring methodsassuring of thesafety conditionsandprotection
againstelectricalshock,properinsulation evaluationofthesystem,evaluationof
over-currentandover-voltageprotection,SPD protection,lightningprotectionand
firehazards,qualityparameterson DC andAC sideofinvertorforefficiency ofthe
systemandmuchmore.Certifiedcandidateisqualifiedtoevaluateparameters,
thelimitssuggestedfromthestandardandtheexamplesofPASS orFAILresults.
Theresponsibilityof thecandidateisto makecorrectreporting,marking,actingand
informingappropriately.
• Requirements for special installations or locations – Solar photovoltaic (PV) power
supply systems
• Applies to the electrical installation of PV systems intended to supply all or part of an
installation. The equipment of a PV installation, like any other item of equipment, is
dealt with only so far as its selection and application in the installation is concerned
• Requirements for the reporting of the results of the initial verification after
completion of a new installation or completion of additions or of alterations to existing
installations.
• IEC 62305 – Protection against lightning
• IEC / HD 60364-7-712 Low Voltage Electrical Installation Safety: Part 6
Verification.
• Handbook with Exercises ˝Low Voltage Electrical Installation Safety˝,
Academy@Metrel

ESB: Electrical Switchboards Safety
(ADK: D-5/439)
PROCEDURES
• Type of earthing system
• Leakage Current DIFF /SUB/TOUCH/PE
• Withstanding Dielectric Testing
• RCD and PRCD testing
EvaluationofResults
• Voltage presence, Loads Disconnected
Theknowledgeisfocusedon following of appropriatesteps,proceduresandrules
supportedbyguidesandstandardsfortesting of electricalsafety oftheswitchboards
afterproduction,initialafterinstallation andperiodically. Candidatereceivesthe
basicknowledgeaboutevaluatedparameters,thelimitssuggestedfromthestandard
andtheexamplesofPASSorFAILresults.Theresponsibility ofthecandidateisto
makecorrectreporting,marking,acting andinforming appropriately.
• Provides the specific requirements for public electricity network distribution
assemblies
• Routine verification
• After Service and After Maintenance Electrical Safety assurance
• After production testing, periodical and after intervention inspection
• Protection against electrical shock
• IEC / EN 61439-1 Electrical Switchboards Safety.
• Handbook with Exercises ˝Switchboard Electrical Safety Testing˝,
Academy@Metrel
• Chart Guide ˝Machines & Switchboards Safety Inspection˝, Academy@Metrel

MST: Machines Safety Testing
(ADK: D-5/204)
PROCEDURES
• Type of earthing system
• LeakageCurrentDIFF/SUB/TOUCH/PE
• Withstanding Dielectric Testing
• Voltage presence, Loads
Disconnected
supportedbyguidesandstandardsfortesting of electricalsafety ofthemachines
afterproduction,initialafterinstallation andperiodically.Candidatereceivesthe
basicknowledgeaboutevaluatedparameters,thelimitssuggestedfromthestandard
andtheexamplesof PASSorFAILresults.Theresponsibility ofthecandidateisto
makecorrectreporting,marking,acting andinformingappropriately.
• Defines test procedures for periodic inspection and after repair, to ensure
electrical safety.
• IEC / EN 60204-1 Safety of machinery. Electrical equipment of machines.
• Handbook with Exercises ˝Machines Electrical Safety Testing˝, Academy@Metrel
• Chart Guide ˝Machines & Switchboards Safety Inspection˝, Academy@Metrel

PAT: Portable Appliances Safety
(ADK: D-5/235)
supportedbyguidesandstandardsforportableandfixedmountedappliances
electricalsafetyafterproduction,afterservicing andperiodically.Candidate
receivesthebasicknowledgeon evaluatedparameters,thelimitssuggestedfrom
thestandardandtheexamplesof PASSorFAILresults.Theresponsibility ofthe
candidateistomakecorrectreporting,marking,acting andinformingappropriately.
• Portable Appliances Safety Periodical Inspection
• Public places electrical safety inspection where portable appliances used
• Portable Appliances in Hotels, Hospitals, Fairs, Schools, Kitchens
• Portable and fixed appliances on Working Places
• Electrical Equipment & Appliances on Mobile Units and in Transport
• Electrical Equipment & Appliances in Special Locations
• Electrical Equipment & Appliances at Construction Building Sites
• Extension Leads and Cables Periodic Inspection
• Portable switchboards & Boxes with or without RCD / PRCD
• After production testing, periodical and after intervention inspection.
• IEC / EN 60335-1 Household and similar electrical appliances – Safety – Part 1:
General requirements
• EN 60745 EN 60745 Hand-held motor-operated electric tools
• Equipment Testing and Measuring According to EN 50678 / DIN VDE 701-702
• Handbook with Exercises ˝Portable Appliances Safety˝, Academy@Metrel
• Chart Guide ˝Portable Appliances Safety Inspection˝
• Wall Poster & Chart Guide ˝After Intervention Inspection˝
PROCEDURES
• Classification of Appliances
• Insulation Resistance Measdurement
• Leakage Current DIFF/SUB/TOUCH/PE
• Extension Leads testing
Disconnected
• Unbalanced Voltage
• Out of range Voltage

AWE: Arc Welding Equipment Safety
(ADK: D-5/274)
supportedbyguidesandstandardsforautomatedArcWelding&PortableAppliances
safetytesting.Candidatereceivesthebasicknowledgeonevaluatedparameters,
thelimitssuggestedfromthestandardandtheexamplesofPASS orFAILresults.
Theresponsibilityof thecandidateisto makecorrectreporting,marking,actingand
informingappropriately.
• Defines test procedures for periodic inspection and, after repair, to ensure
electrical safety.
• Arc Welding Equipment and appliances on Working Places
• Arc Welding Equipment & Appliances on Mobile Units and in Transport
• Arc Welding Equipment & Appliances at Construction Building Sites
• Extension Leads and Cables Periodic Inspection
• Portable switchboards & Boxes with or without RCD / PRCD
• IEC / EN 60974-4 Arc Welding Equipment Safety – Part 4: Periodic Inspection and
Testing
• Handbook with Exercises ˝Portable Appliances Safety˝, Academy@Metrel
PROCEDURES
• Classification of Appliances
• Arc Welding Leakage
• Extension Leads testing
Disconnected

EVSE: Electrical Vehicle Supply Equipment Safety
(ADK: D-5/702)
Getknowhowandinstructionsaboutlatestsituation in e-mobility andthe
theoryofoperationofACcharging stationsEVSE.Getequippedwithknowledge
aboutelectricalsafety,qualityandoperability.Practicalknowledge,experiences,
inspections,testing,measuring andreporting arecrucialtolowertherisksandfulfill
theappropriatelevelofsafetyandqualityaccording to standardsand/ ordirectives
–EN61851-1,EN60364-6.On thepracticalexampleof a (private)EVSEACcharging
station,wewillprepareasimplestructureonelectricalsafetytestingdevices,perform
allnecessarymeasurements,savetheresultsin an instrument,transfertheresultsto
acomputerprogramandcreatea sampleof a report.
• LV electrical installations for electrical vehicles supply equipment.
• Conductor arrangement and system earthing.
• Protection for safety & Protection against electric shock
• First and recurrent Inspections.
• After maintenance & after service testing of electrical safety.
• Selection and erection of electrical equipment
• Devices for protection against indirect contact by automatic disconnection of
supply
• Devices for protection against overcurrent
• IEC / EN / HD 60364-7-717 Low-voltage electrical installations: Requirements for
special installations or locations – Supplies for Electrical Vehicles
• Chart Guide ˝Guide Through Verification on Low Voltage Electrical Installations˝
• Wall Poster ˝Guide Through Verification on Low Voltage Electrical Installations˝
PROCEDURES
• Visual inspection
• Standby, configuration, charging &
error stages
• Operability and stages of the EVSE
equipment
• Voltage earthing system
• Continuity and equalisation testing
• Insulation resistance measurement
• Leakage current DIFF / PE testing
• Automatic tripout ability Isc / Z /
fuse evaluation
• Earthing and grounding testing
• Functional checking and power
consumption evaluation
• Voltage presence
• Turn ON and emergency disconnect
• Out of range voltage
• Leakage current checking

eMOB: Electrical LV Installations in Mobile Units Safety
(ADK: D-5/707)
The knowledge is focused on following of appropriate steps, procedures and
rules supported by Guide Rules on poster and automated electrical safety
testers. Candidate receives the basic knowledge on evaluated parameters, the
limits suggested from the standard and the examples of PASS or FAIL results.
The responsibility of the candidate is to make correct reporting, marking, acting
and informing appropriately.
• LV electrical installations & generators on ungrounded vehicles.
• Mobile units and portable electrical equipment.
• After production testing, periodical and after intervention inspection.
• Fire brigade, Military, Police, Road Maintenance, Ships.
• Emergency vehicles and medical portable units.
• Fairs and shows with LV electrical installations on generator.
• After maintenance & after service testing of electrical safety.
• IEC / EN / HD 60364-7-717 Low-voltage electrical installations –
• Part 7-717: Requirements for special installations or locations – Mobile or
transportable units
PROCEDURES
• Voltage System Checking
• Voltage Balance and Symetry
Evaluation
• Insulation Resistance / ISFL / IMD
Measurement
• Leakage Current DIFF / PE Testing
• Automatic Tripout Ability Isc / Z /
Fuse Evaluation
• Earthing and Grounding testing
Disconnected

MEDi: Medical and Surgery Rooms Electrical Installations Safety
(ADK: D-5/710)
The knowledge is focused on following of appropriate steps, procedures and
rules supported by Guide Rules on poster and automated electrical safety testers.
Candidate receives the basic knowledge on evaluated parameters, the limits
suggested from the standard and the examples of PASS or FAIL results. The
responsibility of the candidate is to make correct reporting, marking, acting and
informing appropriately.
• Pertains to electrical installations in medical locations so as to ensure safety of
patients and medical staff.
• LV electrical installations and locations,
• Insulation monitoring devices for IT systems
• Protection against electric shock
• Automatic disconnection of supply
• Supplementary Protective equipotential bonding
• Leakage Current monitoring and troubleshooting
• Voltage monitoring, balance and unsymetry
• Selection and erection of electrical equipment
• Wiring systems
• Switch-gears and control-gears
• Coordination of various protective devices
• IEC / EN HD 60364-7-710 Low-voltage electrical installations –
• Part 7-710: Requirements for special installations or locations – Medical Location
• IEC EN 61557 – 8 Insulation monitoring devices for IT systems
• Chart Guide ˝Portable Appliances Safety Inspection
PROCEDURES
• Voltage System Checking
• Voltage Balance and Symetry
Evaluation
• Insulation Resistance / ISFL / IMD
Measurement
• Leakage Current DIFF / PE Testing
• Automatic Tripout Ability Isc / Z /
Fuse Evaluation
• RCD testing
• IT Earthing and Grounding testing
Quality Evaluation
Disconnected

MEDe: Medical Electrical Equipment Safety
(ADK: D-5/601)
supportedbyPracticalGuideforMedicalEquipmentRulesandautomatedPortable
andMedicalAppliancesSafetyTesters.Candidatereceivesthedetailedknowledgeon
evaluatedparameters,thelimitssuggestedfromthestandardandtheexamplesof
PASSorFAILresults.Theresponsibilityof thecandidateistomakecorrectreporting,
marking,actingandinforming appropriately.
• Pertains to testing of medical electrical equipment and medical electrical
systems, hereafter referred to as ME equipment and ME systems, or parts of such
equipment or systems, which comply with IEC 60601-1:1988 (second edition) and
its amendments and IEC 60601-1: 2005 (third edition) and its amendments, before
putting into service, during maintenance, inspection, servicing and after repair or
on occasion of recurrent tests to assess the safety of such ME equipment or ME
systems or parts thereof.
• IEC / EN 62353 Medical Electrical Equipment – Recurrent test and test after
repair of medical electrical equipment
• A Practical Guide for Medical Equipment and Electrical System Testing,
Academy@Metrel
• Wall Poster ˝Medical systems Inspection˝
PROCEDURES
• Classification of Medical and classic
Portable Appliances
• Equipment Leakage Current
Alternative/Direct/Diff
• Applied Part Leakage Current
Alternative/Direct
• Supply Leads testing
• Voltage presence, Loads Disconnected
• Turn ON and Emergency disconnect
• Troubleshooting Leakage Current

CERTIFICATION OF PROFESSIONAL QUALIFICATIONS
Professional qualification is a set of skills required to perform a job within a profession
or activity at a certain level of complexity. Professional qualifications are an addition or
upgrade of formal education and open up new opportunities for acquiring knowledge
that you cannot or could not acquire in full-time education, as they are those skills that
are developed on the basis of innovations in technology and work processes, which are
absolutely necessary for mastery of work in a modern, development-oriented society.
Professional qualifications in the field of electrical safety and quality assurance within
the EDISON consortium relate to one or more competencies performed by one person in
the context of their employment or workplace. Professional qualifications are intended
for individuals who want to grow professionally and increase their employment
opportunities, as well as for employers who are aware of the importance of properly
trained employees.
Check the conditions for taking the exam, register for the training if you need and
pass the exam for each individual competency of which the professional qualification
consists.
The selection of individual competencies with links to detailed knowledge and
implementation schedules are given below. Apply for an individual competency where
delegate will gain 2CPD+2CPD*points per competency, or certification of complete
professional qualification where delegate will gain 18CPD +18CPD* points in total for
the whole professional qualification CPQ. (CPD*optional points when pass the exam)
Sign up
Sign Up for Active Online Seminar
CERTIFICATION OF INTERNATIONALLY RECOGNISED COMPETENCES
Certificate of Competence* is the reference document by which the individual proves
that he / she has acquired the relevant expertise by passing the examination (applied
knowledge test) and is acquainted with the novelties in the field of the technical
regulation or standard covered by the certificate.
Conditions for issuing certificates of competence and the methods of assessment are
specified in the examination catalogues approved by the employers’ organizations
(associations, chambers …). The online exam system eliminates a number of
administrative barriers and provides an impartial and transparent basis in the
certification process.
The validity of the certificate is determined by the frequency of technical and
technological changes which are identified by periodic verification. The validity generally
does not exceed three year and may be renewed in accordance with the procedures by
which the certificate was obtained.
A valid certificate of competence / qualification is the basis for obtaining a work permit,
which in the field of electrical safety determines responsibilities between the employee
and the employer.
* Competences are those skills that enable an individual to successfully complete work
tasks and solve problems in a specific workplace or work area.
Academy
Academy
Academy
Akademija

SUMMARY / CONCLUSION
At the training of individual competencies or entire qualification, we will also
mention the related knowledge of neighboring competencies and connections
to electrical safety and quality for professionals, leading engineers, supervisors,
workers and contractors as well as for random living beings in an environment
where the engineering approach ensures safety and living related to electricity.
FEEDBACK
Feedback allows us to constantly grow and develop the effectiveness of training
and prepare improvements and knowledge for the next period.
Feedback can be sent to info@eedison.eu or academy@metrel.si
Consortium EDISON
Accredited Examiner
Agency for Developing of Knowledge
ADK Accredited Catalogue & Register Holder
Certificate Holder
Candidate / Employee
Competencies
Job Briefing & Planning
AgreementBasedTestingCentre
Company or Partner or University
CodeoftheQualification
International Levelled Knowledge & Exam
AuthorityHavingJurisdiction
LocalregulatororCompanyorEmployer

METREL d.d.
Measuring and Regulation Equipment Manufacturer
Ljubljanska 77, SI-1354 Horjul, Slovenia
T +386 (0)1 75 58 200,
metrel@metrel.si, www.metrel.si
Note! Photographs in this catalogue may slightly differ from the instruments at the time of delivery.
Subject to technical change without notice.
Safety&Quality_Related_Electrical_Energetics_Work_Practices_Avgust_2021

CPD_B_F_training-brochure_2021_avgust-free.pdf

Recommended

Recommended

More Related Content

Similar to CPD_B_F_training-brochure_2021_avgust-free.pdf

Similar to CPD_B_F_training-brochure_2021_avgust-free.pdf (20)

Recently uploaded

Recently uploaded (20)

CPD_B_F_training-brochure_2021_avgust-free.pdf