1. The University of Lahore Department of Engineering & Technology Engr. Atiq Ur Rehman
1 STRUCTURAL MECHANICS
ASSIGNMENT-7
DETERMINATE FRAME
Q-1: Draw the shear, moment and axial force diagrams for each member of the frame. Assume the
frame is pin connected at C, and roller connected A. Also draw elastic curve.
Q-2: Draw the shear, moment and axial force diagrams for each of the three members of the frame.
Assume the frame is hinge connected at D and roller connected at A. Also draw elastic curve.
2. The University of Lahore Department of Engineering & Technology Engr. Atiq Ur Rehman
2 STRUCTURAL MECHANICS
Q-3: Draw the shear, moment and axial force diagrams for each member of the frame. Assume the
frame is pin connected at A, and roller connected D. Also draw elastic curve.
Q-4: Draw the shear, moment and axial force diagrams for each member of the frame. Assume the
frame is pin connected at A, and roller connected D. Also draw elastic curve.
3. The University of Lahore Department of Engineering & Technology Engr. Atiq Ur Rehman
3 STRUCTURAL MECHANICS
Q-5: Draw the shear, moment and axial force diagrams for each of the three members of the frame.
Assume the frame is hinge connected at D and roller connected at A. Also draw elastic curve.
Q-6: Draw the shear, moment and axial force diagrams for each of the three members of the frame.
Assume the frame is hinge connected at D and roller connected at A. Also draw elastic curve.
4. The University of Lahore Department of Engineering & Technology Engr. Atiq Ur Rehman
4 STRUCTURAL MECHANICS
Q-7: Draw the shear, moment and axial force diagrams for each member of the frame. Assume the
frame is pin connected at A, and roller connected B. Also draw elastic curve.
Q-8: Draw the shear and moment diagrams for each member of the frame. Also draw elastic curve.
5. The University of Lahore Department of Engineering & Technology Engr. Atiq Ur Rehman
5 STRUCTURAL MECHANICS
Q-9: Draw the shear, moment and axial force diagrams for each member of the frame, assume
fixed support at A. Also draw elastic curve.
Q-10: Draw the shear, moment and axial force diagrams for each member of the frame. Assume
the frame is pin connected at A, and roller connected C. Also draw elastic curve.