Assignment related to Structure analysis to determine the forces in the members of truss by joint method as well as section method.

1. (Assignment-5 Analysis of Statically Determinate Truss)
ENGR. ATIQ UR REHMAN AWAN
STRUCTURAL
ANALYSIS
Department of Engineering & Technology, The University of Lahore

2. (Assignment-5 Analysis of Statically Determinate Truss)
Q-1 Classify the truss as statically determinate, indeterminate, stable or unstable. If it is unstable
then determine the degree of indeterminacy.
Q-2 Classify the truss as statically determinate, indeterminate, stable or unstable. If it is unstable
then determine the degree of indeterminacy.
Q-3 Classify the truss as statically determinate, indeterminate, stable or unstable. If it is unstable
then determine the degree of indeterminacy.
Q-4 Classify the truss as statically determinate, indeterminate, stable or unstable. If it is unstable
then determine the degree of indeterminacy.
ASSIGNMENT 5
Analysis of Statically Determinate Truss

3. (Assignment-5 Analysis of Statically Determinate Truss)
Q-5 Determine the force in each member of the truss by joint method and state
whether it is in tension or compression.
Q-6 Determine the force in each member of the truss by joint method and state
whether it is in tension or compression.
Q-7 Determine the force in each member of the truss by joint method and state whether
it is in tension or compression.

4. (Assignment-5 Analysis of Statically Determinate Truss)
Q-8 Determine the force in members BG, HG, and BC of the truss by method of section
and state if the members are in tension or compression.
Q-9 Determine the force in members GF, FB, and BC of the truss and state if the
members are in tension or compression.
Q-9 Determine the force in members CD, CF, and HG of the truss and state if the
members are in tension or compression.