1. AMR SALAMA
Senior field service Engineer (I&C)
Email: amr.me.salama@gmail.com
Amr.Salama@emerson.com
Mobile: +971 562043144
Revision Date – Nov 18th
, 2016
Introduction:
Graduated -2001-from Alexandria University, Engineering Faculty-communication &
electronics-
Joined Suez Oil Company “SUCO” in 2003 as instrument maintenance Engineer for on/off-shore
facilities, in SUCO, started to work with legacy control systems like single loop controllers,
Pneumatic and hydraulic systems, and relay logic for Emergency shutdown functions.
Joined Honeywell since 2008 in Kuwait as a service Engineer, supporting multiple sites KNPC
(Mina Al-Ahmadi, Mina-Abdallah & Mina-Shuaiba refineries), experienced with spot services,
on-line modifications, hardware add on projects in life plants.
Moved to Honeywell Middle East B.V. Abu Dhabi, UAE since June 2014, where I started to lead
projects with special focus on ESD systems, responsible for delivering the projects in the
specified time, cost and quality objectives.
Moved to Emerson process Management FZE Dubai, as Safety Instrumented Systems SIS Group
leader as a member of the Dubai based Project team, which undertakes the design,
implementation and FAT phases of Process Systems and Solutions (PSS) projects. The PSS
projects include SIS (ESD/FGS/BMS) scope of work.
Specific qualifications:
• Capable of taking responsibility to lead Service Department activities, installation /
commissioning at site, duties include planning, profitability and matters relating to the
efficient running of the project at site level, including commercial matters, Quality
Procedures, Health and Safety.
• Capable of working without direct supervision
• Report opportunities for further business to Service and Regional Sales Manager
• Travel when required, within the Middle East region.
• Look for continuous improvement opportunities.
• FS Eng (TÜV Rheinland, #9359/ 14, Safety Instrumented Systems)
Personal data
• Date of Birth : 1/7/1979
• Place of Birth : Alexandria
• Country of Nationality : Egypt
• Gender : Male
• Address : Abu Dhabi UAE
2. • Marital Status : Married
• Military Status : Completed
• Computer Skills : Very Good
• Characteristics : Self-motivated, Dynamic, Efficient in team work,
willing
to travel abroad
Education
• First University Degree : B.Sc. Engineering
• University : Alexandria University
• Faculty : Engineering
• Major : Electronics & Communication Engineering
• Grade : Good
• Graduation year : 2001
• High School Name : Victory college
Spoken Languages
• Arabic-Degree: Excellent
• English-Degree: Very Good
Training courses
• TUV Functional Safety Program FSEng Certified.
• HUET & Sea Survival crafts.
• EPKS System / Server Configuration and Implementation (EXP02R400)
• Honeywell EPKS Server & controller implementation course (EXP2001R400)
• Honeywell EPKS server advanced implementation & administration (EXP23R400)
• Honeywell Safety Manager Advanced Implementation (4555)
• Honeywell Safety Manager implementation course (4551)
• Honeywell Fail Safe Control “FSC” Implementation course (4508)
• Honeywell Fail Safe Control “FSC” Advanced course (4512)
• DeltaV SIS implementation: (7305)
• SIS Safety Instrumented Systems - Safety Engineering SE101
• SIS Safety Instrumented Systems - Safety Engineering (Advanced) SE201
• Power Quality & Grounding (5590)
Work Experience
Total experience : 11 years in oil & gas field.
Main skills : Honeywell ESD systems, Honeywell Experion PKS system
Current job
Current Job title : SIS Group Leader
3. Employer : Emerson Process Solutions FZE
Employment term : Staff position
Employee ID : 324525
Employer Country : United Arab of Emirates UAE
Period : Feb 2016 to present
Main scope : DeltaV SIS
Field of experience and qualifications
• SIS Implementation – Supervise SIS leads for MEA assigned projects to ensure
timely delivery and quality of the design, configuration, Implementation and
Testing. Take ownership of the SIS project engineering activities on all allocated
projects and proactively utilize methodologies, resources and techniques for
minimizing the execution cost, whilst maintaining the requisite schedule and
quality standard.
• SMS Compliance – Ensure compliance to Emerson Safety Management System
(SMS) procedures and processes. Perform safety configurations, develop and
retain documentation related to customer safety requirements specifications.
• provide the Project Manager with all necessary support and information to ensure
that they are Schedule Management – Actively contribute to the development of a
realistic and achievable project schedule and fully informed of resource
requirements, progress and areas of risk.
• Customer Relations – Be the primary contact for all matters relating to the scope
and Engineering for allocated projects and by working closely with the Project
Manager ensure that each customer’s expectations are fully understood, managed
and achieved.
• Communications – Ensure that all the project team members, inclusive of any
third parties, are provided with all necessary and relevant information - details of
scope, schedule, technical specifications and quality standards – to effectively
deliver their allotted work.
• Procurement – Provide the Project Manager with the procurement list detailed
specifications for any sub-contracted works and services where relevant, along
with required delivery dates.
• Scope control – Fully understand the scope of work for each project with their
portfolio, ensure that it is delivered to the requisite quality, budget and schedule
and that the relevant Project Manager is fully informed, at the earliest
opportunity, of any customer initiated changes in scope.
• Quality control – Ensure that all Engineering activities are undertaken in
accordance with the Company’s quality control processes and that the relevant
standard is achieved.
• Suppliers – Take overall responsibility for the management of the other parties –
product vendors, sub-contractors, other Emerson teams and third parties
undertaking work on behalf of a customer - that are providing products and
services associated with the Senior Lead Engineer’s portfolio of projects.
• Internal knowledge transfer – Actively share knowledge and experience with the
MEA Engineering team and the wider organization.
4. Previous job
Previous Job title : Honeywell Process Solution “HPS” senior service Engineer
Employer : Honeywell Middle East HME
Employment term : Staff position
Employee ID : E433409
Employer Country : United Arab of Emirates UAE
Period : June 2014 to January 2016
Main scope : ESD “Safety Manager & FSC “systems, Experion PKS
system,
Field of experience and qualifications
• Deliver Honeywell’s Life Services Solutions commitments to our customers.
• Lead projects during Engineering, Factory Acceptance Test (FAT), Site Acceptance
Test (SAT) and commissioning phases as required.
• Assist the project Management organization with preparation of project Execution
Plans and method statement preparation.
• Assist the sales organization during pursuit of Safety Solutions opportunities.
• Lead GES team during design, Engineering, FAT and site activities.
• Focal point for communications between customer, Honeywell front office and
back office ream.
• Carry out safety system audits to assess the safety system conditions, provides
recommendations and solutions
• Preventive and corrective maintenance of the Honeywell portfolio hardware and
software upgrades
• System modifications and additions – both on-line and off-line
• Carry out safety systems “FSC & SM” migrations on-line.
• Provide special / custom training to customers upon request
• Actively participate in Honeywell’s growth plans and identify opportunities to
provide additional services in the installed base
• Ensure customer satisfaction, process uptime and system performance while
working as the Resident Support Engineer or while representing Honeywell at
customer locations in various roles
Projects with HME:
• Halon replacement project at Upper Zakum UZ field
(Safety Manager –EPKS – Third party “fire and gas”)
5. • Replacement of F&G system in Dubai Supply Authority DUSUP
(Safety Manager – Experion PKS)
• Power Upgrade project at Zirku Island
(Safety Manager)
• Margham Capacity Increase at Dubai Supply Authority DUSUP
(Safety Manager – C300 – EPKS)
Safety systems FSC &SM controller skills;
• System design (Hardware & logic sheets)
• Maintenance activities (yearly, 3 months).
• Standard system checks (diagnostics).
• Replacing modules
• On-line software upgrades & Standard system modifications (Logic changes,
adding modules).
• Configure external communications with Experion PKS (SCADA, PCDI & CDA)
• Configure safe net communications with safety manager systems and external
communications with 3’rd parties.
• Non-standard system modifications (COM cabling network, adding racks)
• Trouble shooting 2nd
-line with remote assistance TAC L3 or higher
• Certified trainer for implementation and maintenance trainings.
Safety systems FSC &SM certificates: -
• Certified safety service Engineer for the FSC safety system
Certification level: L3, Service Engineer
system: FSC safety system
• Certified safety service Engineer for the safety manager system
Certification level: L3, Service Engineer
system: Safety Certified trainer manager system
Experion DCS skills;
• Basic process control techniques and control strategy implementation.
• Installation and configuration for Experion DCS systems including Experion
servers with TPS interface, Simulation servers, C200 controllers (series A IO and
PMIO), C300 controllers with series C I/O & PMIO, ACE controllers, consoles
stations, flex stations & domain controller.
• Configure Experion Server security.
• SCADA “Supervisory Control And Data Acquisition systems” configuration &
troubleshooting.
• Station and Server redundancy issues.
• C300 PCDI Connections to HC900/ML and Safety Manager.
6. Achievements:
• Completed all assigned projects within the required time frame, and exceeding
the financial results.
• Provided technically Support other projects for ESD related issues, and escalation
path with center of Excellence in Netherlands if required.
Previous job
Previous Job title : Honeywell Process Solution “HPS” lead Engineer
Employer : Honeywell Kuwait
Employment term : Staff position
Employee ID : E433409
Employer Country : Kuwait
Period : June 2008 to June 2014
Main scope : ESD “Safety Manager & FSC “systems, Experion PKS
system,
One wireless Honeywell
Location of services : Kuwait KNPC refineries, KOTC, Qatar Halul, AbuDhabi Das
Island, Oman “Lekhwair & Marmul fields”
Field of experience and qualifications:
• Engineering and Technical expertise in Process Automation and Control Systems
Design, development, installation, commissioning and maintenance.
• Application, Service & Sales support Experience on Honeywell Controllers
C200/C300 “DCS”, FSC/SM “SIS” controllers.
• Interfacing with the Client, engineering contractors and their packaged systems
suppliers.
• System installation, inspection and Site Acceptance Testing SAT.
• Pre-commissioning / loop checking assistance.
• Commissioning & start-up for Experion PKS, Safety Manager Systems & FSC
systems.
• Performing routine and power down preventative maintenance, troubleshooting
and corrective maintenance.
• Performing trainings for Honeywell Employees and customers “Operator,
maintenance & Engineering trainings for SIS.
• Apply Global Service Management GSM procedures to perform various activities,
uses preventive Maintenance tool (PM tool) to generate tasks list.
7. Achievements:
• Established special relation-ship with customers in Kuwait, being a consultancy
for ESD related service activities.
• Support the MEA region for critical migrations, add-on services jobs.
• Build team of younger Engineers in ESD systems, by classroom training and
mentoring in executing service activities.
Previous job
Previous Job title : Instrumentation & Automation service Engineer
Employer : Suez oil company “SUCO”
Employment term : Staff position
Employee ID : 2100
Employer Country : Egypt
Period : June 2003 to April 2008
Field of experience and qualifications:
Detailed Description:-
1. Carry out preventative maintenance (P.M) and troubleshooting for the following
equipments instruments & control systems.
• Pneumatic control panel for offshore diesel fire pump.
• Reciprocating compressors (DRESSER RAND).
• Water injection plant centrifugal pumps, sand filters and vacuum tower
(SERCK BAKER).
• Oil heater & de-Salter plant.
• Oil and gas separation plant offshore & onshore.
• Plant utilities (Multi stages flash desalination and air compressors).
• Waste water treatment plant.
• ESD system for the plant.
• Well head hydraulic control system for platforms (AUTOCON COMPANY)
• Automatic tank gauging ENRAF 854 ATG & 878 CPI.
8. • Fire alarm systems smoke and gas detection in process, tank farm
accommodation and offshore areas.
2. Participates in major overhaul and shutdown maintenance activities.
3. Investigates and troubleshoots maintenance problems, implements fault-finding
routines and procedures, diagnoses problems and takes appropriate action.
4. Inspects materials received to ensure conformance to required specifications and
arranges witnesses testing/operational use of spares to verify Compatibility with
existing equipment, as instructed.
5. Understands the Company health, safety and environmental policy, Performs work in
a safe and efficient manner.