1. Cecil Henderson
603 N.Mesa
Carlsbad, New Mexico, 88220
575-361-0595
cecilhenderson@windstream.net
W O R K E X P E R I E N C E
L&E SERVICES, Carlsbad, NM
Truck Pusher / Sales Rep., Aug 2016 – Present
East Plant Surface Maintenance Supervisor, Oct 2011 – Aug 2016
• Enforce safety rules and regulations.
• Plan work assignments and equipment allocations to meet Maintenance, operations or
production goals.
• Confer with customers, supervisors, contractors, or other personnel to exchange information or
to resolve problems.
• Direct workers in transportation or related services, such as pumping, moving, storing, or
loading or unloading of materials or people.
• Resolve worker problems or collaborate with employees to assist in problem resolution.
• Review orders, production schedules, blueprints, or shipping or receiving notices to determine
work sequences and material shipping dates, types, volumes, or destinations.
• Monitor field work to ensure that it is being performed properly and that materials are being
used as they should be.
• Maintain or verify records of time, materials, expenditures, or crew activities.
• Explain and demonstrate work tasks to new workers or assign training tasks to experienced
workers.
• Prepare, compile, and submit reports on work activities, operations, production, or work-related
accidents.
• Recommend or implement personnel actions, such as employee selection, evaluation, rewards, or
disciplinary actions.
• Requisition needed personnel, supplies, equipment, parts, or repair services.
• Inspect or test Materials, vehicles, equipment, or facilities to ensure that they are safe, free of
defects, and consistent with specifications.
• Dispatch personnel and vehicles in response to telephone or radio reports of emergencies.
• Perform or schedule repairs or preventive maintenance of vehicles or other equipment.
• Interpret safety regulations, or company policies and procedures for workers.
• Drive vehicles or operate machines or equipment to complete work assignments or to assist
workers.
North Plant Maintenance Planner and O&M Coordinator, Aug 2007 – Oct 2011
• Reassemble machines after the completion of repair or maintenance work.
• Start machines and observe mechanical operation to determine efficiency and to detect problems.
• Inspect or test damaged machine parts, and mark defective areas or advise supervisors of repair
needs.
• Lubricate or apply other materials to machines, machine parts, or other equipment, according to
specified procedures.
• Install, replace, or change machine parts and attachments, according to production
specifications.
603 N.Mesa Carlsbad, New Mexico, 88220 575-361-0595 cecilhenderson@windstream.net
2. • Dismantle machines and remove parts for repair, using hand tools, chain falls, jacks, cranes, or
hoists.
• Record production, repair, and machine maintenance information.
• Read work orders and specifications to determine machines and equipment requiring repair or
maintenance.
• Set up and operate machines, and adjust controls to regulate operations.
• Collaborate with other workers to repair or move machines, machine parts, or equipment.
• Inventory and requisition machine parts, equipment, and other supplies so that stock can be
maintained and replenished.
• Transport machine parts, tools, equipment, and other material between work areas and storage,
using cranes, hoists, or dollies.
• Collect and discard worn machine parts and other refuse in order to maintain machinery and
work areas.
• Clean machines and machine parts, using cleaning solvents, cloths, air guns, hoses, vacuums, or
other equipment.
• Replace or repair metal, wood, or other lining in machines, or in equipment compartments.
• Remove hardened material from machines or machine parts, using abrasives, power and hand
tools, jackhammers, sledgehammers, or other equipment.
• Measure, mix, prepare, and test chemical solutions used to clean or repair machinery and
equipment.
• Replace, empty, or replenish machine and equipment containers such as gas tanks or boxes.
Mobile Equipment shop, Feb 2005 – Aug 2007
• Repair and replace damaged or worn parts.
• Dismantle and reassemble heavy equipment using hoists and hand tools.
• Operate and inspect machines or heavy equipment to diagnose defects.
• Test mechanical products and equipment after repair or assembly to ensure proper performance
and compliance with manufacturers' specifications.
• Clean, lubricate, and perform other routine maintenance work on equipment and vehicles.
• Read and understand operating manuals, blueprints, and technical drawings.
• Overhaul and test machines or equipment to ensure operating efficiency.
• Fit bearings to adjust, repair, or overhaul mobile mechanical, hydraulic, and pneumatic
equipment.
• Diagnose faults or malfunctions to determine required repairs, using engine diagnostic
equipment such as computerized test equipment and calibration devices.
• Examine parts for damage or excessive wear, using micrometers and gauges.
• Repair, rewire, and troubleshoot electrical systems.
• Schedule maintenance for industrial machines and equipment, and keep equipment service
records.
• Research, order, and maintain parts inventory for services and repairs.
• Clean parts by spraying them with grease solvent or immersing them in tanks of solvent.
• Weld or solder broken parts and structural members, using electric or gas welders and soldering
tools.
• Adjust and maintain industrial machinery, using control and regulating devices.
• Assemble gear systems, and align frames and gears.
• Fabricate needed parts or items from sheet metal.
• Direct workers who are assembling or disassembling equipment or cleaning parts.
603 N.Mesa Carlsbad, New Mexico, 88220 575-361-0595 cecilhenderson@windstream.net
3. Shift Mehanic, Oct 2002 – Aug 2005
• Disassemble machinery or equipment to remove parts and make repairs.
• Repair or replace broken or malfunctioning components of machinery or equipment.
• Repair or maintain the operating condition of industrial production or processing machinery or
equipment.
• Examine parts for defects, such as breakage or excessive wear.
• Reassemble equipment after completion of inspections, testing, or repairs.
• Observe and test the operation of machinery or equipment to diagnose malfunctions, using
voltmeters or other testing devices.
• Operate newly repaired machinery or equipment to verify the adequacy of repairs.
• Clean, lubricate, or adjust parts, equipment, or machinery.
• Analyze test results, machine error messages, or information obtained from operators to
diagnose equipment problems.
• Record repairs and maintenance performed.
• Study blueprints or manufacturers' manuals to determine correct installation or operation of
machinery.
• Record parts or materials used and order or requisition new parts or materials as necessary.
• Cut and weld metal to repair broken metal parts, fabricate new parts, or assemble new
equipment.
• Demonstrate equipment functions and features to machine operators.
E D U C A T I O N
Carlsbad Senior High School, Carlsbad, NM
High School Diploma, Apr 1984
• Education & TrainingNew Mexico State university at CarlsbadIntroduction to Engineering
Technology, Industrial Processes, Applied DC Circuits, Applied DC circuit Lab, Digital Logic,
Applied A/C Circuits, Applied A/C Circuit Lab, Introduction to InstrumentationCivic
Organizations / HonorsNew Mexico State university at Carlsbad, Deans List, National Deans List
(Spring 1999) with a 4.0 GPA
A D D I T I O N A L S K I L L S
• Over 27 years of industrial MaintenanceExperienced in leading a crew or Crews in repairing
equipmentExperienced in prioritizing work loads and meeting dead linesExperienced in
Supervision, Foreman, Lead man, Planning and SchedulingSelf-Motivated, highly dependable,
Punctual, efficient team worker/ leaderCommitted to high performance and quality
standardsWorked with Maintenance Computer programs such as emesa, Ellipse and MincomAble
to use Microsoft Excel, Word and power pointExperienced in reading- Blue prints and wiring
schematicsExperienced in repairing heavy equipmentExperienced in running heavy
equipmentExperienced working within budget and time restraintsExperienced in inventory and
purchasing
603 N.Mesa Carlsbad, New Mexico, 88220 575-361-0595 cecilhenderson@windstream.net