Usually style and lustre of glass gets diminished as the glass is subjected to normal wear and tear. Some unsightly scratches appear over time. To know more, visit http://www.architecturalinstallations.com.au/glass/repairs/
1. Tips to Remove Scratches from Glass
While installing glass for the first time, it would have appeared crystal clear. But
usually its style and lustre gets diminished as the glass is subjected to normal wear and
tear. You can even see some unsightly scratches appearing over time. If the scratches
are deep enough that they could be felt by the tips of your fingernail, it is time to
consult with a professional for glass scratch repair in Sydney. However, if they are more
superficial you can attempt to remove them yourself. Some ways to do it is given here,
Tooth paste
Other than promoting good dental health, toothpaste possesses an array of household
benefits. And glass scratch removal is one of them. Mix it with a small portion of elbow
2. grease, now you have the easiest and most economical cure for glass scratches in your
hands. Initially clean and dry the glass surface meticulously. Then take a damp and lint-
free cloth, and apply the paste over it. After this, you can start scrubbing the glass for
about 30 seconds in small circular motions. Then, dab the remaining toothpaste away
and inspect the change. Repeat the process until you have minimised the appearance of
the scratch.
Nail polish
If you want to perform glass scratch repair in Sydney in a more controlled manner, go
straight to your dressing table and grab a clear nail polish. It has formidable properties
that can be useful in making your glass flawless, without disrupting its beauty. Apply a
thin layer of coating over the scratch so that the polish would make its way through the
cuts and let them dry for over an hour. Then, you can remove the excess polish from the
glass surface by suing a nail polish remover.
Metal polish
This is another alternate way to do glass scratch removal in Sydney. First, clean the area
thorough and make sure that you remove any dust or debris from it. Following this,
apply the polish over the scratch and rub it in circular motion by using a cloth or cotton
ball. Then clean the area with a damp cloth. The scratches would have gone by then.
Avoid over-applying the metal polish as they can damage the glass further.
Cerium oxide
Take an electric buffer with polishing pad and apply a bit of cerium oxide on the pad.
Then, Buff the scratch at a consistent speed of about 2000-2500 RPM. Use a solution
containing a mixture of ½ ounces of ammonia and 2 cups of water, to spray the area and
wipe them clean. Also, make sure that you wear the protective mask and goggles.
However, if the scratches cannot be removed by these means, chances are you would
need the help of a professional glass scratch repair.
3. A Little about Architectural Installations:
Architectural Installations is a leading company specialised in the installations of
glass, timber, metal architecture, window film and glass film in Sydney for both
residential and commercial areas. Combining the latest technology, break through
manufacturing techniques and quality seen nowhere else Architectural Installations
have a world class product, made here in our very own backyard. To know more, visit
http://architecturalinstallations.com.au/ or Call 0435 222 889