List the main characteristics of “ projects. ” How do these features.pdf

•

0 likes•2 views

4babies2010

Limit of the function f(x,y) = (1,2,3) ( f is constant function from R2 to R3), when (x,y) is approaching (0,0) is (1,2,3) Please explain Solution Given f(x,y) is constant function from R2 to R3 and it is given that f(x,y) = (1,2,3) As it is constant function the value for any x & y is (1,2,3). Limit when (x,y) is approaching (0,0) = f(x,y) at around (0,0) if f(0,0) is discontinuos at (0,0) so the limit is (1,2,3) Limit when (x,y) is approaching (0,0) = f(x,y) at (0,0) if f(0,0) is continuos at (0,0) so the limit is (1,2,3).

Education

List the main characteristics of “ projects. ” How do these features distinguish projects from
other, non-project activities?
Solution
The main characterstics of project are as follows:
1. A project has a single, well defined goal and purpose with all deliverables.
2.A project is unique.
3. A project is large in size in general, is unfamniliar and shows risk
4.A project utilize various set of skills from different organziations and profesions
5. A project is a temporary activity
6. A project has a stake
7.A project is a process to work towards the goal
The following characterstics defines a projetc as a unique, unfamiliar task which requires multi
involvement and these features distingushes the project from non proejct activitivities, as the
non-project activities are repeated and involve procedure and process which are performed by
the same people. the results are certain in contrast to projetc activities and the risk is
comparitivey lower.

Similar to List the main characteristics of “ projects. ” How do these features.pdf

Tugasan 1

sakinahnayan1308

project management

Manish Kumar

Project

sobakavi

Prince2017 part 1

Robert Edward Pinnington

Project management for technologies MGT410

Saqib Imran

0. project management framework (fundamentals)

Mohamed Salah Eldien Mohamed Ali

MANAGEMENT in construction planning and management

MuhammadIrfan561681

INTRODUCTION TO PROJECT MANAGMENT

Harihara puthiran

A study of the reasons, which fail's employees from making results in the projects of XYZ non – profit organization. This research was conducted in XYZ non- profit organization which works out to develop the rural areas of the country. As an organization they work out island widely covering most of the districts in the counter. As a percentage, 85% of their work done by projects basis in every area. All the employees who are working with the organization are attaching to the projects which are conducted by the organization. The head office of the organization is located at the Colombo and the branch offices are located at each district which they are performing their work. All to gather there are around 700 employees working with the organization, and in the head office there are around 65 employees work perform work. As the organization all the work based on the projects, the success of the projects are an essential requirement. It is need to prove with the results that the projects which are conducted by the organization have makes success while giving out comes and impacts through them. But in the current situation organization/ management has identified that the projects which are conducted by the organization are not making success as required by the objectives of them. As all the main activities of the organization based on these projects success or the failure of the projects have a direct impact to the overall organizational performance. Not only that by the way when this problem grows up the employees and all the other stake holders who are influenced by these projects of the organization get affected through this project failure matter. According to this reason the management agreed to conduct a research to find out why the employees who are working with the projects are not able to make the project’s success up to the needed levels. So the research conducted using the project/ program development team and program coordinators, who are having the main responsibility to planning and operating the projects from the starting to the end. As sample population 30 employees were selected and questioner has distributed among them to collect data regarding the research topic. After gathering data through the finding and the data analysis the researcher was able to prove the four selected alternative hypothesis, which have selected for this research study.

A study of the reasons, which fail's employees from making results in the pro...

Apsara Kaduruwana

Quality software project management i need deep explanation for this figure Solution Answer :- Software Project Management : A project is well-defined task, which is a collection of several operations done in order to achieve a goal (for example, software development and delivery). A Project can be characterized as: 1) Every project may has a unique and distinct goal. 2) Project is not routine activity or day-to-day operations. 3) Project comes with a start time and end time. 4) Project ends when its goal is achieved hence it is a temporary phase in the lifetime of an organization. 5) Project needs adequate resources in terms of time, manpower, finance, material and knowledge-bank. Software Project : A Software Project is the complete procedure of software development from requirement gathering to testing and maintenance, carried out according to the execution methodologies, in a specified period of time to achieve intended software product. Need of software project management : Software is said to be an intangible product. Software development is a kind of all new stream in world business and there’s very little experience in building software products. Software Project Manager : A software project manager is a person who undertakes the responsibility of executing the software project. Software project manager is thoroughly aware of all the phases of SDLC that the software would go through. Project manager may never directly involve in producing the end product but he controls and manages the activities involved in production. Managing People : 1) Act as project leader 2) Liaison with stakeholders 3) Managing human resources 4) Setting up reporting hierarchy etc. Managing Project : 1) Defining and setting up project scope . 2) Managing project management activities . 3)Monitoring progress and performance 4) Risk analysis at every phase . 5) Take necessary step to avoid or come out of problems . 6) Act as project spokesperson . Software Management Activities : Software project management comprises of a number of activities, which contains planning of project, deciding scope of software product, estimation of cost in various terms, scheduling of tasks and events, and resource management. Project management activities may include: 1) Project Planning 2) Scope Management 3) Project Estimation Project Planning : Software project planning is task, which is performed before the production of software actually starts. It is there for the software production but involves no concrete activity that has any direction connection with software production; rather it is a set of multiple processes, which facilitates software production. Scope Management : It defines the scope of project; this includes all the activities, process need to be done in order to make a deliverable software product. Scope management is essential because it creates boundaries of the project by clearly defining what would be done in the project and what would not be done. This makes.

Quality software project managementi need deep explanation for thi.pdf

alokkesh

Project report submitted in IIM Calcutta

RAJESH KUMAR SHARMA

Project management 02112009

Manish Chaurasia

Adamson Introduction to Project Management

National Information Standards Organization (NISO)

Project management framework 01

Muhammad Younis

Chapter 1-Project Management power point pptx

AlwanYusuf

Overview of project planning

nidhu_raji88

Proposal Writing

Huiying Ke

lecture 8 (1).ppt

MonikaSharma151258

Managing Change with Project Management Skills

Maureen Adamson

Unit 1 spm

GomathiPrakasham

Similar to List the main characteristics of “ projects. ” How do these features.pdf (20)

Tugasan 1

project management

Project

Prince2017 part 1

Project management for technologies MGT410

0. project management framework (fundamentals)

MANAGEMENT in construction planning and management

INTRODUCTION TO PROJECT MANAGMENT

A study of the reasons, which fail's employees from making results in the pro...

Quality software project managementi need deep explanation for thi.pdf

Project report submitted in IIM Calcutta

Project management 02112009

Adamson Introduction to Project Management

Project management framework 01

Chapter 1-Project Management power point pptx

Overview of project planning

Proposal Writing

lecture 8 (1).ppt

Managing Change with Project Management Skills

Unit 1 spm

More from 4babies2010

Find an equation of the line through (-6, 10), parallel to the line with equation 3x - 7y = 14. Write the new equation in point-slope form. Convert the equation of the new line found in problem #14 to standard form, Ax + By = C, where A, B, and C are integers. Solution 14) Given line is 3x-7y =14 7y = 3x-14 y = (3/7)x - 2 It is of the form, y = mx + c Hence, slope = 3/7 We know that two parallel lines have same slope. Hence, The equation parallel to 3x-7y =14 has slope equal to 3/7. Hence, the required line passing through (-6,10) and parallel to 3x-7y=14 in slope-point form is slope point formula is y-y1= m (x-x1) y-10 = (3/7) (x+6) 15) From 14) , y-10 = (3/7) (x+6) 7y-70 = 3x+18 3x-7y = -88 It is of the form Ax + By = C.

Find the domain of the function. (Enter your answer using interval no.pdf

4babies2010

Explain why the vapor pressure of a solution made with a nonvolatile solution must be less than the vapor pressure of the pure solvent? Solution Escaping of solvent molecules from the surface of liquid to space is called vaporization. The vapors are then condensed. When there is an equilibrium between vaporization and condensation, the pressure exerted by the vapors of the liquid over the liquid is called vapor pressure. In a pure liquid, the entire surface is occupied by the molecules of the liquid whereas in the case of solution, the surface is occupied by the liquid molecuels and nonvolatile solute molecules. So, the number of solvent molecules escaping from the surface is reduced compare to the pure solvent, thus, the vapor pressure of solution is reduced. Hence, the vapor pressure of a solution of nonvolatile solution is less than the vapor pressure of the pure solvent..

factors that are significant in the development of disease includ.pdf

4babies2010

ECO 355 Game Theory I need a right answer of it. QUESTION 9 Player II Player A 6,3 2,6 B 4,3 8,1 Suppose that in the game above Player 2 plays strategy C with probability q-0.3. The value for El1(A,q) is: O a. 4.6 b. 3.2 O c. 8.3 O d. 3.9 Solution Suppose that in the game above Player 2 plays strategy C with probability q=0.3, the value for E(A,q) The Correct Answer is:- D:- 3.9 Reason:- Value E(A,q) = 6*0.3 + 3*0.7 = 3.9.

economic institutions 8. According to Thomas Piketty, what is the si.pdf

4babies2010

Discuss antecedents of target marketing in a case scenario. GEL-1.2: Demonstrate college-level communication through the composition of original materials in Standard English. GEL-6.2: Apply a professionally recognized method of formatting and documentation. In this Assessment you will discuss antecedents of target marketing (i.e. what steps come before target marketing). Using the information on target market antecedents you learned from reading Chapters 6 and 8 in your text, original research on the Internet, and the various Learning Activities provided, read the scenario and respond to the checklist items in a business memo format. Scenario: The product is a portable rolled computer made by the start-up company UclidTouch. The screen and accompanying keyboard roll up for travelers or those who want to easily transport their computer. The unrolled computer measures 8 inches by 16 inches. When rolled up, the computer is 1 3/4 inches in diameter and weighs 1 pound. It fits in a lightweight aluminum canister that has an optional mini-combination lock. It is available in 7 different colors and can be hung around the customer’s neck on a lanyard which also is available in 7 colors. The price is comparable to the pricing for popular tablets already on the market. Business Memo: You are a marketing assistant at UclidTouch tasked with providing a business memo (i.e., an internal company document) to the U.S. A. executive management team of UclidTouch concerning the checklist items provided below. Write a minimum 500-word original business memo. In a concise manner, describe to executive management the data you will analyze to determine a potential market for this product. State your purpose in the opening paragraph and provide sufficient information to explain the required items. Finally, provide a concluding paragraph to summarize your suggestions. Address the following items in your Assessment submission. 1. Identify a market or product category for review. 2. Describe bases for segmenting the market. 3. Identify segmentation descriptors. 4. Explain potential segments based on your reading in Chapter 8 “Steps in Segmenting a Market.” Size of segment Expected growth Purchase frequency Brand loyalty Sales potential Profit potential Chapter Reading Includes: Chapter 6: “Consumer Decision Making” Chapter 6 explains why consumer behavior is essential to the marketer who endeavors to satisfy the needs and wants of customers and wants to communicate effectively with them. When buying products, particularly new or expensive items, consumers generally follow the five step consumer decision-making process shown in Exhibit 6.1 in the Lamb et al. (2014) textbook: Needs recognition Information search Evaluation of alternatives Purchase Post-purchase behavior Each of these steps in the consumer decision process is discussed thoroughly. What is a brand and brand loyalty? A brand can be a company name, symbol, or design that distinguishes one company’s services .

Discuss bio films , formation location etc Discuss bio films , .pdf

4babies2010

Discuss bio films , formation location etc Discuss bio films , formation location etc Solution biofilm is a thin mat of microorganism covered with mucilage or slime screted by them. biofilms usually occur in nutrition rich surfaces, where abundant growth factors are available for biofilm producers. the mucilage or extracellular polymeric substance contains cell debris, amino acids and other byproducts of bacterial metabolism. biofilm formation: it forms at surfaces which are easy to attach and provides suitable environment for supporting the growth of attached organism. microorganism binds to surface via suitable receptors or adhesins and starts utilizing the available material, as they start growing they secrete etracellular mucilage which contains many attractants(molecules that attracts other microorganisms) such as signailing molecules which attracts other species towards the growth of mat thus, a layer of cells develops. location: can be found on any surfaces which renders the bacteria to grow. commonly observed surfaces are: water pipes, tooth surfaces(dental caries), urinary catheters, surgical sites, aquarium. all these surfaces provide abundant food material and optimum growth fascilities. functions: it prevents organisms from antibiotics and thus make them resistant, ample growth oppurtunities, acts as a infection/virulence factor example: dental caries is a good example of bofilm production by Streptococcus mutans, Catheter associated UTI caused by many gram negtive is also due to the biofilm production..

Discuss the importance of documentation in the medical record.So.pdf

4babies2010

Design a word guess game. Ask player 1 to input a word. Then player 2 guesses the word. If the guessed word is not correct, program says \"Your guess is not correct!\". Player 2 can guess unlimited times until the answer is correct, or type \"@exit\" to quit the program. When player 2 types \"@hint\", print out the first and last letter of the word. When players 2 types \"@hint\" again, randomly tells one of the other unknown letter. After this, every time player 2 input \"@hint\", randomly tells one of the other unknown letter until no more unknown letters. If the guess is correct, print out \"Yes! ! ! ! !\" Solution from random import randint word=raw_input(\"Player 1:Enter word\ \") guess=\"\" flag=0 while guess!=word: guess=raw_input(\"Player 2:Enter guess word\ \") if guess==\"exit\": break elif guess==\"hint\" and flag==1: print word[randint(0,len(word))] elif guess==\"hint\" and flag==0: print word[0],word[len(word)-1] flag=1 elif guess==word: print \"Yes\ \" else: print \"Your guess is not correct\ \" ====================================================== Output: akshay@akshay-Inspiron-3537:~/Chegg$ python wordguess.py Player 1:Enter word hello Player 2:Enter guess word hint h o Player 2:Enter guess word hello Yes.

Determine the molecular geometry of CO32â».Solution .pdf

4babies2010

DATA SET G Mileage and Vehicle Weight Obtain the regression equation. (Negative amount should be indicated by a minus sign. Round your answers to 4 decimal places.) Calculate R2. (Round your answer to 4 decimal places.) Calculate the degrees of freedom and t-critical. (Round your answers to 2 decimal places.)Using the data set G, answer the questions given below. Solution Here dependent variable y is City MPG and indepedent variable x is weight. All the parts we can done by using MINITAB. Enter the data. STAT --> Regression --> Regression --> Response : y --> Predictors : x --> Results : select second option --> ok --> ok output is : Regression Analysis: y versus x The regression equation is y = 36.6 - 0.00456 x Predictor Coef SE Coef T P Constant 36.634 1.879 19.49 0.000 x -0.0045564 0.0004871 -9.35 0.000 S = 2.49891 R-Sq = 68.1% R-Sq(adj) = 67.3% Analysis of Variance Source DF SS MS F P Regression 1 546.44 546.44 87.51 0.000 Residual Error 41 256.03 6.24 Total 42 802.47 y = -0.00456 x + 36.6 R-sq is 68.1% or 0.681 Degrees of freedom is n-1. where n is number of data pairs. df = n - 1 = 43 - 1 = 42 And critical value by using EXCEL is, syntax : =TINV(probability, deg_freedom) where probability = alpha deg_freedom = df = 42 t-critical = 2.0181 We see that | t | = | -9.35 | = 9.35 t > t-critical Reject H0 at 5% level of significance. Conclusion : Population slope for x is differ than 0..

Define each class of incident.types of incidents classifcationsr.pdf

4babies2010

Compare the golf equation of h(x) = -16x^2 +120x and the baseball equation of h(x) = -16x^2 + 60x + 4. What do you see as a major difference between these 2 formats? How does this difference directly relate to hitting a golf ball or a baseball? Rewrite the golf equation of h(x) = - 16x^2 +120x to show Marc hitting the ball while standing on top of a platform that is 10 feet off the ground. Using our quadratic equation knowledge match the following scenarios. Hitting a golf ball on the moon Hitting a golf ball on Earth from the top of a tall building Hitting a baseball on Jupiter Hitting a baseball on Earth by a bionic man Hitting a baseball on Earth by a 10 foot tall person h(x) = -16x^2 + 500x + 4 h(x) = -50x^2 + 50x + 4 h(x) = -8x^2 +100x h(x) = -16x^2 +75x + 8 h(x) = -16x^2 + 150x + 300 Solution h(x) = -16x^2 + 120x ( golf) h(x) = -16x^2 + 60x + 4 ( base ball) a) Difference between the two is the presence of constant 4 in equation of base ball) . b) This means that base ball is thrown from a height of 4 ft Golf ball is hit from the ground. c) h(x) = -16x^2 + 120x Ball is hit from the platform : h(x) = -16x^2 + 120x + 10.

Complete a force field analysis for an organization with which you a.pdf

4babies2010

Write a shell command to search all the files in the working directory with names containing one character extension for the lines that does not start with a character A or character B. Solution Answer: #!/bin/bash # to search all the files in the working directory with names containing one character extension #for the lines that does not start with a character A or character B find . -type f -name \"*.?\" | -not -name \'[ac]*\' -type f.

Write CC++ a program that inputs a weighted undirected graph and fi.pdf

4babies2010

Why is it helpful to approach the marketing research process from a \"backward” approach? How can this backward approach lead to more useful research findings? Solution Backward approach in marketing design helps to analyse each stage properly and determines what comes after it. This will also give more control over realistic market picture rather than just historical data analysis. This gives more sensitive information from the end users and can work backward to integrate the necessary things more precisely.The backward approach will help the researchers to design the outcome more better so that they can define the problem statement more precisely. The backward approach avoids the usual glitches in research as it has more control over the end outcomes and can guide the researcher with more rational support. This will also reduce the overall time taken for data interpretation and give better control over classification of relevenat information and creating value added insights.Thys backward approach will help to guide the research forward and it is all about what it is required and what they need from the study so that routemap will be clear for all data collection sampling and processing..

Why was the iodide ion successful for the SN2 reactions What if you.pdf

4babies2010

What process causes plant ion-uptake to acidify soil? What soil pH range generally promotes the greatest availability of cations? Solution The process that causes plant ion-uptake to acidify soil is known as soil acidification. It is a process by which the soil pH decreases over time without producing any visible signs. Slow soil acidification occurs under natural conditions over thousands of years, with high rainfall areas most affected, whereas, rapid acidification occurs over a few years under intensive agricultural practices. Soil acidification affects the surface and the subsoil simultaneously. However, areas that remain unaffected by industrial pollution, there soil acidification is mainly caused by the release of protons (H+) during the oxidation of carbon (C), sulphur (S) and nitrogen (N) compounds in soils. During nitrogen cycling, the major processes leading to acidification consists of the cation imbalance over anion during uptake in the rhizosphere of plants, during nitrification from fixation or from the fertilizers, and during the removal of plant and animal products by leaching. The uptake of excess cations over anions by plants results in the acidification of the rhizosphere which is a “localized” effect and can be balanced by the release of hydroxyl (OH-) ions during subsequent plant decomposition. Soils are considered acidic below a pH of 5, and alkaline above a pH of 7.5 and very alkaline above a pH of 8. It has been observed that the “ideal” soil pH is close to neutral, which fall within a range from a slightly acidic pH of 6.5 to slightly alkaline pH of 7.5. It has been determined that most plant nutrients are optimally available to plants within this range helpful for plant root growth. However, Nitrogen (N), Potassium (K), and Sulfur (S) are major plant nutrients that enhance plant growth and development. Most of the plant nutrients (cations) tend to be less available when soil pH is above 7.5, and are optimally available at a slightly acidic pH in the range of 6.5 to 6.8..

What were the triumphs and limitations of democracy in Periclean Ath.pdf

4babies2010

What postulates that the state and activity of a particular region of chromatin depends upon the specific modifications, or combinations of modifications, to the histone tails in that region? It suggests that the pattern of modifications adorning the tails of the core histones contains encoded information governing the properties of the nucleosomes containing them. the DaVinci code the chemiosmotic hypothesis the histone code the genetic code Solution Answer is the histone code. Modifications to the histone proteins which bind to the dna, make the fragment of dna accessible to various enzymes..

What process causes plant ion-uptake to acidify soil What soil pH r.pdf

4babies2010

what is the name and stereochemistry of the compoundSolution.pdf

4babies2010

What are some of the architectural decisions that you need to make w.pdf

4babies2010

We learned the various design reviews during the application life cycle. What is the role of DBA in each review stage? Who, other than DBA, should be involved at each stage and why? Do you think some of the design reviews may need to be reviewed again as a result of application development? Why or why not? Solution Design reviews are an important factor of the system development lifecycle for database applications. It is during the design review that all aspects of the database and application code are reviewed for efficiency, effectiveness, and accuracy. It is imperative that all database applications, regardless of their size, are reviewed to assure that the application was design properly, efficient coding techniques were used, and the database is accessed and modified correctly and efficiently. The design review is an important process for checking the validity of design decisions and correcting errors before applications and databases are promoted to production status. Multiple design reviews should be conducted throughout the application’s life. There are seven basic design review phases for a database application: There are many aspects of the development process and its resulting application that are addressed by design reviews. Some of the areas that can be addressed by a design review include: The DBA usually must act as the center point for organizing and conducting design reviews. If the DBA does not organize design reviews it is unlikely that any design review will be conducted. And if design reviews are not conducted, the application is more apt to suffer performance and availability problems in a production environment. A group consisting of subject matter experts and the developer’s peers and co-workers should conduct each design review. Formal design review roles should include the leader, the scribe, the mediator, and the participants. The leader can change from one design review to the next, but within the scope of a single design review a single leader must be assigned. The primary role of the leader is to act as a master of ceremonies to keep the review process moving along. Other duties include creating an agenda and ensuring that the agenda is followed, engaging all participants of the design review to solicit everyone’s input, ensuring that all participants maintain proper decorum, working with the proper participants before the meeting to ensure that all required documentation will be made available for the design review, and any other tasks necessary to ensure a successful design review. Though it is not mandatory, the DBA typically acts as the leader of design reviews for applications using a database. Thank you..

What are lichens What are foliose lichensSolutionAnswers .pdf

4babies2010

The wire fencing costs $3.25 per linear foot. The privacy fencing costs $5.45 per linear foot. The homeowner wants a total garden area of 600 square feet. a. write a model for the cost of the constructing the fence, in terms of a single input variable. b. calculate the dimensions that will result in minimum cost. c. How much of each type of fencing will be used? Solution w = length of wire fence p = length of privacy fence cost = w*3.25 + p*5.45 w*p = 600 a. cost = w*3.25 + (600/w)*5.45 cost = 3.25*w + 3270/w d(cost)/dw = 3.25 - 3270/w^2 = 0 3.25 = 3270/w^2 w^2 = 1006.15 b. w = 31.72 feet.

These are questions to be answered in a paper about the Chernobyl in.pdf

4babies2010

The following comparative income statement (in thousands of dollars) for the two recent fiscal years was adapted from the annual report of Speedway Motorsports, Inc., owner and operator of several major motor speedways, such as the Atlanta, Texas, and Las Vegas Motor Speedways. Current Year Previous Year 2 Revenues: 3 Admissions 4Event-related revenue $104,312.00 $116,644.00 131,164.00 170,368.00 65,824.00 $472,000.00 $484,000.00 42,544.00 180,304.00 44,840.00 NASCAR broadcasting revenue Other operating revenue 7 Total revenue 8 Expenses and other: 9 Direct expense of events 10 NASCAR purse and sanction fees 91,568.00 $101,640.00 117,612.00 20,328.00 220,220.00 424800.00 $459,800.00 $24,200.00 118,000.00 19,352.00 195,880.00 11 Other direct expenses 2 General and administrative 13 Total expenses and other Income from continuing operations $47,200.00 14 Required A. Prepare a comparative income statement for these two years in vertical form, stating each item as a percent of revenues. Enter all amounts as positive numbers. Rounding instructions Solution VERTICAL ANALYSIS OF INCOME STATEMENT Particulars Current Year Amount Current Year Percentage Previous Year Amount Previous Year Percentage Admissions $ 1,04,312.00 22.10% $ 1,16,644.00 24.10% Event Related revenue $ 1,42,544.00 30.20% $ 1,31,164.00 27.10% NASCAR Broadcasting Revenue $ 1,80,304.00 38.20% $ 1,70,368.00 35.20% Other Operating Income $ 44,840.00 9.50% $ 65,824.00 13.60% Total Revenue $ 4,72,000.00 100.00% $ 4,84,000.00 100.00% Expenses and others Direct expenses of events $ 91,568.00 19.40% $ 1,01,640.00 21.00% NASCAR purse and sanction fees $ 1,18,000.00 25.00% $ 1,17,612.00 24.30% Other direct expenses $ 19,352.00 4.10% $ 20,328.00 4.20% General and adminstrative $ 1,95,880.00 41.50% $ 2,20,220.00 45.50% Total Expenses and others $ 4,24,800.00 90.00% $ 4,59,800.00 95.00% Income from continuing operation $ 47,200.00 10.00% $ 24,200.00 5.00%.

The following is the (incomplete) header file for the class Fracti.pdf

4babies2010

The accounting records for Eisner Manufacturing Company included the following cost information relating to its first year of operations: Direct materials Direct labor Fixed manufacturing overhead Variable manufacturing overhead $ 60,000 $ 80,000 100,000 $ 20,000 Assume the company produced 10,000 units of inventory and sold 6,000 of these units for $192,000. What amount of finished goods will be reported on the balance sheet at the end of the year under absorption costing? Under variable costing? A. $104,000, $64,000 B. $64,000, $104,000 C. $130,667, $64,000 D. $64,000, $130,667 Solution Calculate unit product cost and finished goods : So answer is a) $104000 ; $64000AbsorptionvariableDirect material66Direct labour88Variable manufacturing overhead22Fixed manufacturing overhead100Unit product cost2616Finished goods inventory40004000Finished goods inventory cost10400064000.

The adjusted trial balance for Tybalt Construction as of December 31.pdf

4babies2010

Steel can be strengthened by all but which of the following Annealing Quenching and tempering Age or precipitation hardening Work hardening Solution Sol: option A Steel can be strengthened by quenching or tempering, Precipitation hardening, work hardening. Steel can not be strengthened by Anneling process. 1) Anneling is a heat treatment that alters the physical and sometimes chemical properties of a material to increase its ductility and reduce its hardness, making it more workable. It involves heating a material to above its recrystallization temperature, maintaining a suitable temperature, and then cooling. In annealing, atoms migrate in the crystal lattice and the number of dislocations decreases, leading to the change in ductility and hardness. 2) Quench hardening is a mechanical process in which steel and cast iron alloys are strengthened and hardened. These metals consist of ferrous metals and alloys. This is done by heating the material to a certain temperature, depending on the material 3) Precipitation hardening, also called age hardening, is a heat treatment technique used to increase the yield strength of malleable materials, including most structural alloys of aluminium, magnesium, nickel, titanium, and some steels and stainless steels 4) Work hardening also known as strain hardening or cold working, is the strengthening of a metal by plastic deformation. This strengthening occurs because of dislocation movements and dislocation generation within the crystal structure of the material..

Summarize the case Surgery Iturralde v. Hilo Medical Center USA , i.pdf

4babies2010

Suppose we are searching for some key r in a BST. As we perform the search, we compare z to the keys on the path from the root to the leaf in the BST. Which sequence below cannot be the sequence of keys examined during the search? Explain why not. Do not assume that the search below is performed on the same BST 85, 76, 30, 15, 6, 1 13, 98, 28, 94, 33, 85, 48, 77, 51, 62, 55 99, 78, 44, 87, 57, 52 16, 33, 77, 54, 73, 60 67, 24, 74, 55, 48 Solution (e) is the option. In BST ,First we search for the root. If the key is greater than root then we recur in the right sub tree or we recur in the left sub tree. In (e) the root is 67. The key is not 67 that\'s why we recurred to left sub tree that is 24 less than 67. Now in the sequence it cannot be 74 because this number is greater that the root 67. The number in the sequence can be greater than 24 but strictly less than 67..

Suppose we draw 2 cards out of a deck of 52. Let A = “the first card.pdf

4babies2010

More from 4babies2010 (20)