Cable Sheath Testing & Fault Location
SEBA KMT MFM5-1 is the universal test instrument for cable sheath testing including prelocation and pinpointing of cable sheath faults - in sheath testing mode SEBA KMT MFM5-1 can detect minute cable sheath insulation damage on low and high voltage cable networks. SEBA KMT MFM5-1 ensures fast and precise cable sheath fault location - the instrument is menu-driven and fully automatic sheath fault prelocation is accurately achieved by inputting total cable length. SEBA KMT ESG 80-2 can be combined with the MFM5-1 for earth fault location in LV-HV cables. Cable Sheath Test & Fault Location SEBA KMT MFM5-1 Features : Sheath testing, fault prelocation and pinpointing combined in single unit, sheath testing up to 5kV, time saving prelocation of sheath fault.
Recommended
More Related Content
What's hot
What's hot (20)
Similar to Cable Sheath Testing & Fault Location
Similar to Cable Sheath Testing & Fault Location (20)
More from Thorne & Derrick International
More from Thorne & Derrick International (20)
Recently uploaded
Recently uploaded (20)
Cable Sheath Testing & Fault Location
- 1. MFM 5-1 WWW.CABLEJOINTS.CO.UK THORNE & DERRICK UK TEL 0044 191 490 1547 FAX 0044 477 5371 TEL 0044 117 977 4647 FAX 0044 977 5582 WWW.THORNEANDDERRICK.CO.UK Cable sheath testing as well as sheath fault prelocating and pinpointing Benefits: Fully automatic prelocation of sheath faults Gentle sheath fault location due to power limiting Userfriendly menu-operation Description An intact sheath of a plastic insulated medium voltage cable is the prerequisite for the avoidance of water ingress and subsequent cable faults. The MFM 5-1 is a universal test instrument for sheath testing including prelocation and pinpointing of location of a sheath fault. In the sheath testing mode, current measurements with 1 and 10 mA full deflection can be carried out, permitting a detection of even minute insulation damage of the cable sheath. Technical Data 0 … 0.5 kV DC 0 … 1.0 kV DC 0 … 2.0 kV DC 0 … 5.0 kV DC Test current 0 … 1.0 mA 0 … 10.0 mA Location current 0 … 0.15 A DC 0 … 0.30 A DC 0 … 0.60 A DC 0 … 1.50 A DC Pulse ratio 1:3s 0.5 : 3 s 0.5 : 6 s Meters kV-Meter 0 … 6 kV / mA-Meter LCD display 2 x 16 digits, backlit Length input 1 … 9999 m Test duration 1 … 99 min Power supply 230 V AC ± 10% / 45 … 60 Hz Automatic prelocation with self-calibration and second measurement for confirmation Power input 600 VA Weight 30.6 kg (including cables) Clear indication of prelocated distance in meters Dimensions (L x W x H) 520 x 385 x 255 mm The instrument is very easy to use, being menu-driven. To get precise results of the fully automatic prelocation, only entering the total cable length is needed. The instrument will carry out a self-calibration, conduct a double measurement and display the result directly in metres. Features Sheath testing, fault prelocation and pinpointing combined in one unit. (Pinpoint receiver ESG 80-2 not included in scope of delivery) Sheath test up to 5 kV with or without timer Time saving prelocation of sheath fault Reduction of thermal load by using prelocation, limited current and pulsed pinpointing signal Scope of delivery MFM 5-1 Set of all necessary cables Operating manual Options / Accessories ESG 80-2 earth fault locator as pinpoint receiver ISO 9001:2000 sebaKMT is a registered trademark of the sebaKMT group Test voltage Technical data subject to change without notice. LFT_MFM 5-1_eng_2007_11