This is a brief on contemporary casegoods. If you have any questions please feel free to contact alibia.devente@gmail.com

1. We will be starting momentarily. For Audio Please Dial: Conference Call 888.481.3032 Passcode 75892620# Press *6 to mute phone on/off

2. Contemporary Transitional Traditional Universal Desks & Storage

3. Planning Approach Built-Up or Modular ? Components Built-Up Desk Bridge Storage Tasklight Credenza Tackboard Accessories Support Hutch Traxx Wall-mounted Worksurfaces Options Finishes Modesty Panel Tables Technology

4. Planning Built-Up Approach Bridge Desk Tasklight Credenza Tackboard Accessories Hutch Wall-mounted Options Finishes Modesty Panel Technology

5. Planning Modular Approach Desk Bridge Storage Tasklight Credenza Tackboard Accessories Support Hutch Traxx Wall-mounted Worksurfaces Modesty Panel Options Finishes Technology

6. Contemporary Desks & Storage

7. Prevail Overview

9. Features Page 8

10. Surface Details Page 8 Chamfer

11. Pull Profile Page 8 Apex Apex

12. Technology Management Page 9

13. Grommet Page 9

14. Modesty Panel Page 9

16. Prevail At Work

17. Priority Overview

22. Features Page 33

24. Pull Profile Page 33 Helix (61) Cascade (62) Link (63) Wisp (64)

25. Technology Management Page 34

26. Power and Data Page 34

28. Modular Componets & Traxx

29. Hinged Modesty Panel Page 37

30. Integrating with Traxx and Tiles Page 38

31. Modular Worksurface Types: Page 39

32. Rim Detail

33. Drawer Profile

34. Pediment Detail

35. Transaction Counters Starting on page 112

36. Priority At Work

37. Fluent Overview

46. Fluent Overview Page 98 The signature aesthetic is the precision miter construction. Technology Management Worksurfaces are standard with support channels. Support pedestals neatly conceal cords, CPU’s and personal items in addition to support. Technology modesty panel features a channel for cord storage

47. Fluent Features Page 99 Support Legs Arris Rim Recessed Pulls Technology Modesty Floating Worksurface Technology Pedestal

48. Technology Management Page 100 Two sizes of grommets are available Rectangular and Square. Grommets can be factory installed or purchased separately, charge applies.

50. Worksurfaces Page 104 Worksurfaces are 1 31/6” thick. Arris rim profile is standard. Worksurfaces can be supported by undersurface pedestals with spacer bars, support legs or a combination to both. Modesty panels attach under the worksurface. Privacy Screens wrap around the worksurface on Fluent only. Keyboard trays will not attach under the worksurface. Support Channel Four sided rim Surfaces are specified main, filler or extension

51. Leg Assemblies Page 105 Are only available as #511 silver satin Worksurfaces are not pre-drilled to accept support. Attachment hardware ships standard. Leg assembly in non-handed. Depth of leg assemblies must match worksurface depth. Leg application will not support set-on-surface and highback support assemblies. Low storage support leg attach to low storage components. Add a resin leg insert for additional privacy. One cord manager Low storage support leg assemblies Leg inserts may be specified for privacy

52. Modesty Panels Page 106 Modesty panels are intended to be mounted 1 ½” away from storage components. Modesty panel can be used with all worksurfaces however they never mount behind a pedestal. Veneer and painted privacy panels are finished on both sides mount with included “L” brackets. Resin privacy panels are ¼” thick with polished exposed edges mount with an aluminum frame along the top edge. Technology modesty panels are feature a cable trough on the back side made of while, translucent polypropylene mount with hinge brackets.

53. Modesty Panels Page 107 Modesty panels do not match a specific set of dimensions. You will want to leave a 1 ½” gap on either side of a storage unit or support leg when calculating the width of a modesty panel. Support leg dimensions are 2 ¼”. Support pedestal dimension is 15”.or 18” wide.

54. Privacy Screen Page 108 Can only be used wit h Fluent worksurfaces. Privacy screens are made of ¼” thick resin with polished exposed edges. Mounts along the width of the worksurface as it cannot attach where a leg assembly is located at the end of a worksurface. Installation does not deface worksurface. Screen Frame Worksurface View from side Mount this side only.

55. Low Storage Page 109 Low storage units are 19 5/8” and are available as 30”, 36” or 44” widths and 15” or 22” depths. There are a variety of configurations to support countless storage needs. Casters are inset on mobile units which allow the to sit next to each other. Freestanding low storage units allow for reconfiguration. When low storage is used in conjunction with low support assembly can support a worksurface. Set-on-surface units may be placed on top of low storage units. The only storage unit that will align is the 49” unit to align at a total height of 69”

56. Desk-Height Storage Page 110 Desk-height storage units are available 15”, 18”, 30” or 36”W and 22”, 28” or 34” D in a wide variety of configurations. Standing-Height Storage Page 111 Standing-height storage units are available 30” or 36” and 15” or 22”D in a range of options. Total height is 41 ½”. Total finished height with standing-height storage is 41 ½”. 15”D units accept perpendicular worksurfaces only.

57. Vertical Storage Page 112 Vertical storage units are 22”D and available 18”, 24” 30” or 36”W. Units are available 42”, 50” 69” or 78”H. Dual sided are specified handed units, but can be converted to the opposite hand in the field if required. Set-on-Surface Page 113 Set-on-surface units are 15”D and available 18”, 30” or 36”W. All sides are finished. Set-on-surface assemblies can not be supported by leg assemblies, desk height storage must be used.

58. Overhead Storage Page 114 Overhead storage units are 15”D and are available 30”, 36”, 54” 72” and 90”W. Single unit heights are 18”H. Double unites are 28”H. Suspended and stacking models are finished on all sides. Wall-mount cabinets attach to the wall with provided brackets. Shelves are ¾” and can be moved from one section to another. Stacking cabinets can only be used with a highback or lowback overhead assembly.

59. Reception Stations Page 115 Available as a right, left L-shape or U-shape with one transaction shelf or three with ADA front transaction shelves. Panels are 43” surround and require worksurface/ support to be specified separately. Glass transaction shelf spans surround. Mounting brackets are standard with the surround panels. Worksurfaces and storage is specified separately.

61. Fluent At Work

62. Kimball Office Resources Dealer Sales Manager Sales Specialist Customer Care/ By Design 800.482.1818 Product Technical Support 800.481.6696 Product Specifier Alibia de Vente Market Education 770.265.4006 or [email_address]

63. Additional Resources

64. Locking Information Page 8 Page 4

65. Desks & Storage