Transcript of "DT117/4 Sustainable design and build revision"
Sustainable Design and Build Revision<br />Sonya Daly<br />
Critically analyse and elaborate on THREE of the following renewable technologies.<br /> <br />Solar Thermal<br />Photovoltaics<br />District Heating and Cooling<br />Green Roofs<br />Wind Power<br />Biofuels and Biomass <br />
Discuss in detail the two forms of embodied energy in buildings?<br />Define your understanding of Life Cycle Analysis in relation to Embodied Energy<br />
SUDS<br />Propose and elaborate on a system that may be designed and incorporated for a new development within a built up urban community. Sketches may be used where appropriate to assist.<br />
Elaborate on, with the aid of a flow diagram sketch each of the various stages that should be considered in the Sustainable Planning Process.<br />
What are the principal requirements of Part L of the Building Regulations?<br />
You can’t mange what you can’t measure!<br /> How do we Reduced Operating Costs?<br />
While the Building Regulations require that new buildings achieve minimum standards of energy efficiency, higher levels are in many cases worthwhile.<br />Discuss how we may achieve these levels through the Sustainable Pre Design process.<br />
What Information is Required to determine BER of a domestic dwelling and discuss the importance and application of each <br />
A particular slide catching your eye?
Clipping is a handy way to collect important slides you want to go back to later.