1. How to judge an energy saving gas boiler
Energy-efficient gas boiler first meet the environmental requirements, the use of
natural gas as fuel sulfur oxide emissions, the content of nitrogen oxides and dust
little haze to ease the harm is necessary, and whether it is energy-efficient gas
boiler energy-efficient boilers can be judged from the following two points:
1, energy-saving gas boiler is whether you can burn the fuel completely: For
energy-efficient gas boiler, the fuel combustion in the furnace is very full, high
combustion efficiency of other parameters in the same circumstances, the same
amount of water. heated to a certain temperature, the amount of fuel used by the
high combustion efficiency of the boiler is far below the low efficiency gas boilers,
which reduces the cost of buying fuel, energy-saving effect is remarkable.
2, see the boiler exhaust gas temperature is high: for energy-efficient gas boiler,
the flue gas after combustion temperature of the fuel when the exhaust
temperature is not too high, the temperature is too high, indicating that not all
the heat released in the boiler feed water, these as exhaust heat is discharged
into the air, the temperature is too high, the boiler will reduce transfection
efficiency, energy-saving effect is reduced.
Therefore, gas boiler manufacturers ZG that the boilers to see whether the
purchase of energy-efficient main judge from the above two aspects, energy-
efficient gas boiler radiation heating surface for the whole corrugated furnace,
convection heating surface using threaded pipe, heat large, boiler heat output
foot, thermal efficiency can be as high as 92%, higher than the national
regulations, energy-saving effect is remarkable.
Energy saving industrial boiler manufacturers
http://www.zgboiler.ph/Energy-saving-industrial-boiler-manufacturers.html