fault monitring system

1. Project on
GSMBasedFault Monitoring Systemin cell phone
tower shelter
 Group members
 Varun kr. Sharma
 Vivek kr. Das
 Surbhi Gaur
 Vishakha Goel
ELECTRONICS & COMMUNICATION DEPT.
 Supervised by
 Ms. Ritika Tandon

2. Agenda
 Introduction
 Basic Block Diagram
 GSM Modem
 Microcontroller
 Features & Advantages
 Area of Application
 Scope for future enhancement
 Conclusion & Result

3.  OBJECTIVE
The goal of this presentation is to explain
working of our project GSMBasedFault MonitoringSystemin cellphone
tower shelter.
It also helps to monitor the Power Grid, Industry.
We have no need to put a person on relay room to monitor
the Fault/ Relay .
This project designs an indication system with overvoltage and
over-current.
Introduction

4. Basic Block Diagram

5. GSM MODEM
 In this Project GSM
Modem is used to develop a
Interface between Mobile &
Microcontroller by using
GSM SIM.
 It connects Microcontroller
to network provider to send
the SMS.

6. Microcontroller
 It is a low power, high
performance 8 bit
microcontroller(89S51)
 4.0-5.5 voltage operating
range
 128*8-bit internal RAM
 32 Programmable I/O
lines
 Programmable & flash
memory

7. Features
 A message will be sent on the number of Supervisor
when the fault occur in the transmission system.
 Long life
 No need to monitor from the Relay room.
 Negligible electricity consumption
 Easy to Install
 No Maintenance Required
 Very affordable price

8. ADVANTAGES
 No need to monitor from relay room.
 System can be monitored and controlled from
anywhere.
 Save time.
 Save men work.
 Mobile number can be changed at any time.

9. Area of Application
The major areas captured by it are :
 Power Grid
 Factories
 Industrial Area
 Home Automation.
 And many more…………..

10. SCOPE FOR FUTURE ENHANCEMENTS
 The scope for the future enhancement of the
circuit is also shown in the block diagram. If an
amplifier connected to the motor or various other
equipment at the power grid is connected to the
microcontroller circuit and suitable programming
is done then along with the fault detection
controlling of power grid can also be done by the
use of GSM technology.

11. Conclusion & Results
 Hence by this project we can Monitor the
fault at power grids using GSM Based Mobile
by means of SMS.
 Grid status will not be lost in power failure
condition.

12. Thank you!