1. WAIST
1. Measure the waist area where you want to wear your pants. Make sure the tape is snug, but not pulling tightly,
and not too loose.
2. (Do NOT mention your label size, measure your waist according to the instructions above, readymade pants are
always more than their label sizes and vary from brand to brand)
SEAT
1. The seat measurement is taken where the buttocks are at their largest.
Thighs
1. Determine the widest part of your thigh and measure according to the picture.

2. Knee
1. Measure around your knee cap, snug, with room for one finger.
Pants Length
1. Measure the length from the waist to the floor or the length you want, you should measure the
length while wearing you shoes.
2. Measuring outer length of your existing pants can help, you should measure it from the top of
the waist band to the leg bottom or the length you want.
Pants Cuff
1. Measure from one side to the other side.
You will then multiply this measurement by 2.
This is your leg opening measurement.

3. Front Rise
1. Measure from the crotch where the inseam meets the front and back seams to the top of the
waistband.
2. Measure with the front laid flat