knowledge sharing

1. ORGANIZATION CHART CUM RESPONSIBILITY
STRUCTURE OF ENGINEERING DEPARTMENT
MR. PANKAJ GUPTA
Director (Operations & Business Development)
NOTE :- 1) In case of Absenteeism / Non-availability of staff member, the next Sr. Person will take over.
DOC NO. F10/PA/HR/01-03 PREPARED BY CHECKED BY CONTROLLED BY APPROVED BY PAGE
REVISION NO. 08
H.O.D (ENGINEERING) D.G.M (MANUFACTURING & OPERATIONS) H.O.D (HR/ADMIN.) DIRECTOR
1 OF 1
REVISION DATE 01-04-17
LEGENDS :- RFQ – Request for Quote
TS - TS: 16949 Activities
MR.UDAI SHANKAR DWIVEDI
Dy. Manager- Engineering
MR.DALJEET SINGH
Sr. Engr.-Engineering
MR. PARDEEP KUMAR
Sr. Manager – Engineering
 Implementation of departmental
Proceduresalign with TS 16949
 Update Departmental objective
Proceduresalign with TS 16949
 Review Feasibility for New RFQ’s &
make Process & Cost sheets
 New Project Reports & Documents
 Process Design for New Parts
 Development of New Products as
per Timing Plan to meet customer’s
requirements.
 Selection of M/c ’s/ Tooling &
Equipment for new Projects
 Development of Tools/ jig/ Fixtures
& Testing Method.
 Floor layouts for new Projects
 Implementation of Low Cost
Automation, New Technology
 Training to their subordinates
 Update PFD, CP & FMEA of all
Current Production parts
 Prepare APQP Timing plan for
NPD as per TS16949 & Update
development Progress
 Prepare BOM of NPD in ERP
System
 Update Tool, Fixture & Gauge
Drawings
 Update Operation standards as
per Control plan
 Identify & implementation of
Improvements projects in
current process
 Control of drawing issue /ECN
Records
 Submission of PPAP for annual
validation & N P D
JAGPREET SINGH
Engr.-Costing
MR.NARESH KUMAR
Dev.Engr.-Engineering Vacent
Asst. Engr.-Engineering
MR. ASHWANI KUMAR
Sr. Engr.-R & D
 Develop & Implementation of Departmental Procedures
align with TS 16949
 Review & Approval for Tool Designs of NPD & Production
parts
 Validation of Feasibility of New Parts & Sub assemblies
for NPD
 Validation of Tool Concepts & Process to Ensure Quality &
Safety Requirements
 Selection of Equipment Utilities, Testing Methods.
 Submission of PPAP Documents to Suppliers& Yearly Up
gradations.
 Timely & Ist. Time Right Completion of Projects.
 Standardization of Tooling.
 RFQ for New Business.
 Identify & Fulfill Training needsfor Subordinates
 New RFQ –Review Feasiblity
Making Process, Packing ,Cost
Sheets,
 Make Cost Comparison reports
of Production parts with Cost
Sheets
Vacent
Engr.-Engineering
 Update PFD, CP & FMEA of all
Current production parts
 Prepare BOM of NPD in ERP
System
 Update Tool, Fixture & Gauge
Drawings
 Update Operation standards as
per Control plan
 Identify & implementation of
Improvements projects in
current process
 Update plant layouts
 Coordinate between Prod.,
Tool Room & Engineering
 Making Tool /Fixture Trials as
per APQP Timing plan & making
Initial Samples
 Identify modification reqd. in
Tooling /Process
 Process setting at vendor End
for outsourcing part/operation
 Prepare APQP Timing plan for
NPD as per TS16949 & Update
development Progress
 Submission of PPAP
 Prepare BOM of NPD in ERP
System
 Designing of Tooling, Fixtures
Test Rigs & Gauges for NPD
 Design component drawings on
TAL Format
 Finalize PDI & Packing stds.
 Make Operation standards
 Floor layout for New projects.
 Make PFD, CP, FMEA
 Control of Drawing issue for
NPD
 Prepare APQP Timing plan for
NPD as per TS16949 & Update
development Progress
 Submission of PPAP
 Designing of Tooling, Fixtures
Test Rigs & Gauges for NPD
 Prepare BOM of NPD in ERP
System
 Proto samples on 3D printer
 Design component drawings on
TAL Format
 Finalize PDI & Packing stds.
 Make Operation standards
 Floor layout for New projects.
 Make PFD, CP, FMEA
 Control of Drawing issue for
NPD