3. 3
1/19/2023 10:19
CS575 ATM Layers 3
ATM Information Transport Concept
Higher
Layer
AAL
ATM
Layer
Physical
Layer
End - to - End
Edge - to - Edge
Error Recovery
&
Flow Control
Higher
Layer
AAL
ATM
Layer
Physical
Layer
ATM
Layer
Physical
Layer
ATM
Layer
Physical
Layer
ATM Network
User User
4. 4
1/19/2023 10:19
CS575 ATM Layers 4
Functions of ATM Layers
Cell rate decoupling
HEC sequence generation/verification
Cell
delineation
Transmission frame
adaptation
Transmission frame
generation/recovery
Generic flow control
Cell Header generation/extraction
Cell VPI/VCI translation
Cell multiplexing
Higher layers
ATM
Adaptation
Layer
Convergence
Sublayer
Segmentation
and
reassembly
Sublayer
ATM Layer
Physical
Layer
Transmission
convergence
Sublayer
Physical medium
Sublayer
High layer functions
Convergence
Segmentation and reassembly
Bit timing
Physical medium
5. 5
1/19/2023 10:19
CS575 ATM Layers 5
Physical Layer:
Physical Medium (PM) Sublayer
0 Specify physical medium and transmission characteristics (e.g.,
multimode or single mode fiber)
0 Insertion and extraction of timing information
0 Specify bit timing, line coding
Higher Layers
ATM Adaptation Layer (AAL) Convergence Sublayer (CS)
Segmentation and Reassembly Sublayer (SAR)
ATM Layer (ATM) Virtual Channel (VC)
Virtual Path (VP)
Physical Layer (PL)
Transmission Convergence Sublayer (TC)
Physical Medium Sublayer (PM)
6. 6
1/19/2023 10:19
CS575 ATM Layers 6
Physical Layer Interfaces
0 Three major categories of physical layer interfaces for ATM networks:
- The existing Plesiochronous Digital Hierarchy (PDH):
(Designed for used over copper media)
= DS-1 (1.544 Mbps)
= DS-3 (44.736 Mbps)
= E1 (2.048 Mbps)
= E3 (34.368 Mbps)
= E4 (139.264 Mbps)
- The new Synchronous Digital Hierarchy (SDH):
(Designed for used over fiber optic links)
= STS-3 (155.52 Mbps)
= STS-12 (622.080 Mbps)
- Physical media used on the local premises for ATM LANs
7. 7
1/19/2023 10:19
CS575 ATM Layers 7
Physical Layer Interfaces (continued)
0 Interfaces specified by the ATM Forum UNI Specification V3.1:
- SONET STS-3c (OC-3c) Interface
= Based on SDH/SONET standards
= For public and private UNI
= 155.52 Mbps
= Single mode and multimode fiber
- DS-3 Interface
= Based on ANSI T1E1.2/94-002R1 standard
= For public and private UNI
= 44.736 Mbps
= Physical Layer Convergence Protocol (PLCP) defined to carry DS-3
ATM cells (excluding PLCP overhead, 40.704 Mbps available for
ATM cells)
= Coaxial cable media
9. 9
1/19/2023 10:19
CS575 ATM Layers 9
Transmission Convergence (TC) Sublayer
0 For transmission, receive cells from ATM layer
0 Pack/map cells into appropriate transport format
- Cell-based
- PLCP-based
= DS-1
= DS-3
- SDH/SONET-based
0 Deliver cells to PM sublayer for transmission
0 Insert idle cells in order to provide a continuous flow of cells (cell rate
decoupling)
0 HEC generation/verification
0 For receiving, extract cells from bit or byte stream received from PM
sublayer
13. 13
1/19/2023 10:19
CS575 ATM Layers 13
B-ISDN/ATM Protocol Reference Model
Source: Stallings: Data and Computer Communications
14. 14
1/19/2023 10:19
CS575 ATM Layers 14
W. Stalling, Local and Metropolitan Area Networks, 6th edition,
Prentice Hall, 2000, Chapter 11
References
W. Stalling, Data and Computer Communications, 6th edition,
Prentice Hall, 2002, Chapters 11-12
A. Wu, Advanced Local Area Networks, Lectures & Slides, Rivier
College, 2001.