This document provides instructions for using various features of the Zultys 55i phone system. It describes how to add or remove users from conference calls, put calls on hold, transfer calls, send calls to voicemail, set up call forwarding, add contacts to the phone directory, make calls from the directory, access voicemail, and set up a voicemail box.

1. Zultys 55i Cheat Sheet
Add users to conference call
1. While already connected to another phone number, press the “Conf” button
2. Enter the phone number that you wish to add to the conference call
a. Optional: Press the “Redial” button and use the arrow buttons to locate the number that you wish to call, as
described in the “Redial” section of this tutorial
3. Press the “Dial” button
4. Once connected to the user at the number you just dialed, press the “Conf” button to connect all three numbers
Leave conference call
You can disconnect yourself from a conference call by performing any of the following actions:
o Hang the phone up on the cradle (be sure that the earpiece depresses the button in the well of the cradle)
o Press the “Goodbye” button
o Press the “Leave” button
Remove user from conference call
You can disconnect another number connected to a conference call by performing the following actions:
1. Use the arrow keys to select the number that you wish to disconnect from the conference call
2. Press the “Drop” button
Hold and Pickup
You can place a call on hold by pressing the “Hold” button
You can return to the held call by pressing the “Pickup” button
Transfer call
IF you want to speak with the person to whom you are transferring the call:
1. Press the “Xfer” button (this will place the currently-connected phone # on hold)
2. Enter the phone number that you wish to add to the conference call
a. Optional: Press the “Redial” button and use the arrow buttons to locate the number that you wish to call, as
described in the “Redial” section of this tutorial
3. Press the “Dial” button
4. Speak with the user at the transfer #
5. When ready to connect the two users, press, the “Xfer” button
6. You may now hang the receiver up
a. No further action is necessary after pressing “Xfer” in step 5 if you were on speaker
ELSE IF you want to simply transfer the current call to another number without speaking to the user on the end of the
number to which you are transferring it, then you can perform the following actions (note that this option is not available if
you use the redial function to locate the # to connect to):
1. Press the “Xfer” button (this will place the currently-connected phone # on hold)
2. Enter the phone number that you wish to add to the conference call
3. Press the “Xfer” button
4. You may now hang the receiver up
a. No further action is necessary after pressing “Xfer” in step 3 if you were on speaker
Send incoming call to voicemail
Copyright ©2012 The Brookfield Group& Indianapolis Gastroenterology and Hepatatology. All rights reserved.

2. To send an incoming call directly to voicemail, press the “Goodbye” button
Forward calls
To set call forwarding up, perform the following actions:
1. Press the “Options” button
2. While option 1 is selected, press the “Right” arrow button
3. Use the “Up” and “Down” arrow buttons to select the type of call forwarding that you want to set up
4. While the option corresponding to the type of call forwarding that you want to set up is selected, press the “Right”
button
5. While the “State” option is selected, press the “Right” arrow button to set the state to “On”
6. Press the “Down” arrow button to select the “Number” option
7. Enter the number to which you want the selected type of calls to be forwarded
8. Press the “Done” button
Add phone # to directory
1. Press the “Directory” button
2. Press the “Add New” button
3. Enter the name associated with the phone # that you wish to add
a. Note that you may press the button that says either “123,” “abc,” or “ABC” in order to change the type of
characters available for entry
4. Press the “Down” arrow button
5. Enter the phone # that you wish to add
6. Press the “Save” button
Place call using directory
1. Press the “Directory” button
2. Use the “Up” and “Down” arrow buttons to select the number that you wish to call
3. Press the “Dial” button to call from speaker, or lift the receiver to call from the receiver
Voicemail access
1. Press the “Voicemail” button
2. Enter your voicemail password (default: “1234”) + ‘#’
3. If asked for your mailbox #, enter your extension number (i.e. “4002”)
Set voicemail up
To set your voicemail box up, follow the steps in the “Voicemail access” section of this tutorial, followed by the directions
issued by the phone robot lady
Copyright ©2012 The Brookfield Group& Indianapolis Gastroenterology and Hepatatology. All rights reserved.