This document provides instructions for using various telephone features on Nortel Networks phones. It includes descriptions of over 50 features such as call forwarding, conference calling, speed dial, do not disturb and more. For each feature, it lists the button presses needed to access the feature and provides a brief explanation of its functionality. The document is intended as a quick reference guide for users to learn how to use the different features available on their Nortel phone.
Grandstream GRP261X Carrier-Grade IP PhoneTRIKONPtyLtd
Reproduction or transmittal of the entire or any part, in any form or by any means, electronic or print, for any purpose without the express written permission of Grandstream Networks, Inc. is not permitted. Information in this
Grandstream GRP261X Carrier-Grade IP PhoneTRIKONPtyLtd
Reproduction or transmittal of the entire or any part, in any form or by any means, electronic or print, for any purpose without the express written permission of Grandstream Networks, Inc. is not permitted. Information in this
Manual Cisco spa512g
A SPA512G Cisco Telefone IP foi projetado para simplificar a instalação, proporcionando maior segurança.
Saiba mais: http://www.lojamundi.com.br/cisco-spa512g-telefone-ip.html
Wireless fire alarm control panel app monitor and sms, voice phone call alarm center. Hotel fire security equipment, salon, restaurant fire security system wireless fire alarm easy installing fire automatic fighting system.
Transcript: Selling digital books in 2024: Insights from industry leaders - T...BookNet Canada
The publishing industry has been selling digital audiobooks and ebooks for over a decade and has found its groove. What’s changed? What has stayed the same? Where do we go from here? Join a group of leading sales peers from across the industry for a conversation about the lessons learned since the popularization of digital books, best practices, digital book supply chain management, and more.
Link to video recording: https://bnctechforum.ca/sessions/selling-digital-books-in-2024-insights-from-industry-leaders/
Presented by BookNet Canada on May 28, 2024, with support from the Department of Canadian Heritage.
Builder.ai Founder Sachin Dev Duggal's Strategic Approach to Create an Innova...Ramesh Iyer
In today's fast-changing business world, Companies that adapt and embrace new ideas often need help to keep up with the competition. However, fostering a culture of innovation takes much work. It takes vision, leadership and willingness to take risks in the right proportion. Sachin Dev Duggal, co-founder of Builder.ai, has perfected the art of this balance, creating a company culture where creativity and growth are nurtured at each stage.
Accelerate your Kubernetes clusters with Varnish CachingThijs Feryn
A presentation about the usage and availability of Varnish on Kubernetes. This talk explores the capabilities of Varnish caching and shows how to use the Varnish Helm chart to deploy it to Kubernetes.
This presentation was delivered at K8SUG Singapore. See https://feryn.eu/presentations/accelerate-your-kubernetes-clusters-with-varnish-caching-k8sug-singapore-28-2024 for more details.
GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using Deplo...James Anderson
Effective Application Security in Software Delivery lifecycle using Deployment Firewall and DBOM
The modern software delivery process (or the CI/CD process) includes many tools, distributed teams, open-source code, and cloud platforms. Constant focus on speed to release software to market, along with the traditional slow and manual security checks has caused gaps in continuous security as an important piece in the software supply chain. Today organizations feel more susceptible to external and internal cyber threats due to the vast attack surface in their applications supply chain and the lack of end-to-end governance and risk management.
The software team must secure its software delivery process to avoid vulnerability and security breaches. This needs to be achieved with existing tool chains and without extensive rework of the delivery processes. This talk will present strategies and techniques for providing visibility into the true risk of the existing vulnerabilities, preventing the introduction of security issues in the software, resolving vulnerabilities in production environments quickly, and capturing the deployment bill of materials (DBOM).
Speakers:
Bob Boule
Robert Boule is a technology enthusiast with PASSION for technology and making things work along with a knack for helping others understand how things work. He comes with around 20 years of solution engineering experience in application security, software continuous delivery, and SaaS platforms. He is known for his dynamic presentations in CI/CD and application security integrated in software delivery lifecycle.
Gopinath Rebala
Gopinath Rebala is the CTO of OpsMx, where he has overall responsibility for the machine learning and data processing architectures for Secure Software Delivery. Gopi also has a strong connection with our customers, leading design and architecture for strategic implementations. Gopi is a frequent speaker and well-known leader in continuous delivery and integrating security into software delivery.
Connector Corner: Automate dynamic content and events by pushing a buttonDianaGray10
Here is something new! In our next Connector Corner webinar, we will demonstrate how you can use a single workflow to:
Create a campaign using Mailchimp with merge tags/fields
Send an interactive Slack channel message (using buttons)
Have the message received by managers and peers along with a test email for review
But there’s more:
In a second workflow supporting the same use case, you’ll see:
Your campaign sent to target colleagues for approval
If the “Approve” button is clicked, a Jira/Zendesk ticket is created for the marketing design team
But—if the “Reject” button is pushed, colleagues will be alerted via Slack message
Join us to learn more about this new, human-in-the-loop capability, brought to you by Integration Service connectors.
And...
Speakers:
Akshay Agnihotri, Product Manager
Charlie Greenberg, Host
Neuro-symbolic is not enough, we need neuro-*semantic*Frank van Harmelen
Neuro-symbolic (NeSy) AI is on the rise. However, simply machine learning on just any symbolic structure is not sufficient to really harvest the gains of NeSy. These will only be gained when the symbolic structures have an actual semantics. I give an operational definition of semantics as “predictable inference”.
All of this illustrated with link prediction over knowledge graphs, but the argument is general.
Essentials of Automations: Optimizing FME Workflows with ParametersSafe Software
Are you looking to streamline your workflows and boost your projects’ efficiency? Do you find yourself searching for ways to add flexibility and control over your FME workflows? If so, you’re in the right place.
Join us for an insightful dive into the world of FME parameters, a critical element in optimizing workflow efficiency. This webinar marks the beginning of our three-part “Essentials of Automation” series. This first webinar is designed to equip you with the knowledge and skills to utilize parameters effectively: enhancing the flexibility, maintainability, and user control of your FME projects.
Here’s what you’ll gain:
- Essentials of FME Parameters: Understand the pivotal role of parameters, including Reader/Writer, Transformer, User, and FME Flow categories. Discover how they are the key to unlocking automation and optimization within your workflows.
- Practical Applications in FME Form: Delve into key user parameter types including choice, connections, and file URLs. Allow users to control how a workflow runs, making your workflows more reusable. Learn to import values and deliver the best user experience for your workflows while enhancing accuracy.
- Optimization Strategies in FME Flow: Explore the creation and strategic deployment of parameters in FME Flow, including the use of deployment and geometry parameters, to maximize workflow efficiency.
- Pro Tips for Success: Gain insights on parameterizing connections and leveraging new features like Conditional Visibility for clarity and simplicity.
We’ll wrap up with a glimpse into future webinars, followed by a Q&A session to address your specific questions surrounding this topic.
Don’t miss this opportunity to elevate your FME expertise and drive your projects to new heights of efficiency.
Securing your Kubernetes cluster_ a step-by-step guide to success !KatiaHIMEUR1
Today, after several years of existence, an extremely active community and an ultra-dynamic ecosystem, Kubernetes has established itself as the de facto standard in container orchestration. Thanks to a wide range of managed services, it has never been so easy to set up a ready-to-use Kubernetes cluster.
However, this ease of use means that the subject of security in Kubernetes is often left for later, or even neglected. This exposes companies to significant risks.
In this talk, I'll show you step-by-step how to secure your Kubernetes cluster for greater peace of mind and reliability.
Dev Dives: Train smarter, not harder – active learning and UiPath LLMs for do...UiPathCommunity
💥 Speed, accuracy, and scaling – discover the superpowers of GenAI in action with UiPath Document Understanding and Communications Mining™:
See how to accelerate model training and optimize model performance with active learning
Learn about the latest enhancements to out-of-the-box document processing – with little to no training required
Get an exclusive demo of the new family of UiPath LLMs – GenAI models specialized for processing different types of documents and messages
This is a hands-on session specifically designed for automation developers and AI enthusiasts seeking to enhance their knowledge in leveraging the latest intelligent document processing capabilities offered by UiPath.
Speakers:
👨🏫 Andras Palfi, Senior Product Manager, UiPath
👩🏫 Lenka Dulovicova, Product Program Manager, UiPath
Slack (or Teams) Automation for Bonterra Impact Management (fka Social Soluti...Jeffrey Haguewood
Sidekick Solutions uses Bonterra Impact Management (fka Social Solutions Apricot) and automation solutions to integrate data for business workflows.
We believe integration and automation are essential to user experience and the promise of efficient work through technology. Automation is the critical ingredient to realizing that full vision. We develop integration products and services for Bonterra Case Management software to support the deployment of automations for a variety of use cases.
This video focuses on the notifications, alerts, and approval requests using Slack for Bonterra Impact Management. The solutions covered in this webinar can also be deployed for Microsoft Teams.
Interested in deploying notification automations for Bonterra Impact Management? Contact us at sales@sidekicksolutionsllc.com to discuss next steps.
LF Energy Webinar: Electrical Grid Modelling and Simulation Through PowSyBl -...DanBrown980551
Do you want to learn how to model and simulate an electrical network from scratch in under an hour?
Then welcome to this PowSyBl workshop, hosted by Rte, the French Transmission System Operator (TSO)!
During the webinar, you will discover the PowSyBl ecosystem as well as handle and study an electrical network through an interactive Python notebook.
PowSyBl is an open source project hosted by LF Energy, which offers a comprehensive set of features for electrical grid modelling and simulation. Among other advanced features, PowSyBl provides:
- A fully editable and extendable library for grid component modelling;
- Visualization tools to display your network;
- Grid simulation tools, such as power flows, security analyses (with or without remedial actions) and sensitivity analyses;
The framework is mostly written in Java, with a Python binding so that Python developers can access PowSyBl functionalities as well.
What you will learn during the webinar:
- For beginners: discover PowSyBl's functionalities through a quick general presentation and the notebook, without needing any expert coding skills;
- For advanced developers: master the skills to efficiently apply PowSyBl functionalities to your real-world scenarios.
3. 1
About this guide
Use this guide as a quick reference for accessing the features of your telephone. Your
system administrator will inform you if any of these features are not available for your
telephone.
Buttons
This guide uses the Business Series Terminals button icons. The table below shows
which buttons to use on the different types of Nortel Networks telephones.
Telephone features
Button Name T7000, T7100, T7208,
T7316, T7316E
M7100, M7208,
M7310, M7324
Feature ≤ Ä
Hold ≥³ ú³
Volume Control √ Ã
Release ® ¨
Background
Music
≤°fl Cancel ≤£°fl
Listen to music (provided by your office) through your telephone
speaker when you are not on a call.
Button
Inquiry
≤•‚
Check what is programmed on any button. Use when labeling
buttons.
Call Duration ≤‡‡
Briefly display the approximate length of your current or most recent
call.
Call Forward ≤› Cancel ≤£›
Send your calls to another telephone in your system.
Call Park ≤‡›
Put a call on hold so that it can be picked up from any telephone in
your system. The display shows a three-digit retrieval code.
To retrieve a parked call from a telephone, press an intercom button
and dial the retrieval code. On the T7100/M7100 telephone, just lift
the handset and dial the retrieval code.
Call Pickup -
directed
≤‡fl
Answer any ringing telephone.
Press ≤‡fl and dial the extension number for the ringing
telephone.
4. 2
Call Pickup
group
≤‡fi
Answer a call that is ringing at another telephone in your pickup group.
The external call that has been ringing longest is answered first.
Call
Queuing
≤°‚⁄
Answer the next call. If more than one call is waiting, priority is given
to incoming external calls over callback, camped, or transferred calls.
Camp-on ≤°¤
Re-route a call to another telephone even if all its lines are busy.
Press ≤°¤, then dial the extension number of the receiving
telephone.
Class of
service
password
≤fl°
Change the dialing filters on a line or telephone, or gain external
access to your system. Dialing filters determine which numbers you
can dial.
Press ≤fl° and enter a password provided by your system
administrator to change your class of service.
Conference ≤‹
Establish a conference call between yourself and two other parties.
1. Make or answer the first call.
2. Put the first call on hold.
3. Make or answer the second call.
4. After the second call is connected, press ≤‹.
5. Press the line or intercom button of the first held call (not required on the
T7100/M7100 telephone).
6. Press ® to end the conference call.
To remove yourself from a conference permanently
(unsupervised conference):
Press ≤‡‚. The other two callers remain connected. (Some
external lines may not support this feature. See your system
administrator.)
To put a conference on hold:
Press ≥. The other two callers can still talk to each other.
To split a conference:
Press the line or intercom button of one caller to consult privately while
the other caller is on hold. To re-establish the conference, press
≤‹.
To disconnect one party:
Press the line or intercom button of the caller you want to disconnect,
then press ®. Press the line or intercom button of the remaining
caller to resume your conversation.
5. 3
Conference
continued
To independently hold two calls:
Press the line or intercom button of the first caller, then press ≥.
The second caller is automatically put on hold. To re-establish the
conference, retrieve one call from hold, press ≤‹, then retrieve
the second call from hold.
Contrast
adjustment
≤•‡
Adjust the contrast of your display.
Press ≤•‡, then press a number from ⁄ to · (depending on
your telephone). Press ≥ to set your choice.
Dialing
modes
≤•°¤
Choose one of three methods of dialing.
1. Press ≤•°¤.
2. Press £ to select the mode.
3. Press ≥ to store the mode.
Standard Dial: Select a line, then dial the number. (Standard Dial is
always available, even when another dialing mode is selected.)
Automatic Dial: Dial the number without choosing a line button first.
Your prime line is automatically selected for the call.
Pre-Dial: Dial the number, then press a line button to place the call.
Edit the number by pressing √ before placing the call.
Do Not
Disturb
≤°fi Cancel ≤£°fi
When you are not on a call prevent all incoming calls, except priority
calls, from ringing at your telephone. When you are on a call, block an
incoming priority call.
Group
Listening
≤°‚¤ Cancel ≤£°‚¤
Use both the handset and speaker while you are on a call. To avoid
electronic feedback, keep the handset away from the speaker during
the call, and press ®to hang up.
Hold ≥
Temporarily suspend a call.
To retrieve a held call, press the line button for the held call.
(Press ≥ on the T7100/M7100 telephone.)
Exclusive Hold ≤‡· or ≤ ≥
Temporarily suspend a call and prevent other telephones from picking
it up.
Language
Choice
≤•fi‚⁄ Select Primary Language for the telephone display.
≤•fi‚¤ Select Alternate Language for the telephone display.
≤•fi‚‹ Select Alternate Language 2 for the telephone display.
≤•fi‚› Select Alternate Language 3 for the telephone display.
6. 4
Last
Number
Redial
≤fi
Automatically redial the last external telephone number that you
dialed.
Line pools ≤fl›
With a line pool, telephones can share several lines for making calls.
1. Press ≤fl› or an intercom button.
2. Enter a line pool access code. (See your system administrator for
a list.)
Line
Redirection
≤°› Cancel ≤£°›
Send calls arriving on an external line to another telephone outside
your system. (Some external lines may not support this feature. See
your system administrator.)
This feature is not available on the T7100/M7100 telephone.
Link ≤‡⁄
Generate a Link signal Ü to access a PBX or other host exchange.
Long Tones ≤°‚°
Generate a tone for as long as you hold down a button. This is used
to communicate with devices like fax or answering machines. Long
tones are in effect only for your current call.
Messages ≤⁄ Cancel ≤£⁄
Send a message to another telephone within your system.
To view and reply to your messages:
1. Press ≤flfi.
2. Press • and £ to view your message list.
3. Press ‚ to call the person who left you the message.
To erase a message:
1. Press ≥ while viewing a message.
Moving line
buttons
≤•°⁄
Change the position of your line or hunt group buttons.
1. Press ≤•°⁄.
2. Press the line button that you want to move.
3. Press the button that you want to move the line to.
4. Press ®. The two buttons are exchanged.
5. Update the button label strip on your telephone.
Line buttons cannot be exchanged with intercom, answer or
handsfree buttons.
Name and
number
blocking
≤°⁄· Cancel ≤£°⁄·
Block the outgoing name and/or number on a per-call basis.
1. Press ≤°⁄·.
7. 5
Page ≤fl‚ and the code (1 to 3) and zone
(Zones 0 to 6 on Modular ICS and zones 1 to 3 on Compact ICS)
Make a page announcement through either the internal (code 1) or
external (code 2) speakers, or both (code 3). Zone 0 on the Modular
ICS pages all zones.
Page announcements are programmed to timeout after a pre-selected
amount of time which is set by your system administrator.
Internal page ≤fl⁄ and zone
Make a page announcement to all, or to a specific group of
telephones, through the telephone speakers.
External page ≤fl¤
Make a page announcement through an external loudspeaker system.
Internal and external page ≤≤≤≤fl‹fl‹fl‹fl‹ and zone
Make a page announcement through both your telephone speakers
and an external loudspeaker system.
Pause ≤‡°
Program a 1.5 second delay Ý, into an external autodial sequence.
For pulse dialing: • also inserts a 1.5 second delay.
Priority Call ≤fl·
Interrupt a person who is on a call.
A person on another call can press ≤°fi (Do Not Disturb) to
block priority calls.
Privacy ≤°‹
Change the privacy setting for an external line. If a line normally has
privacy, this permits another telephone that shares the line to join your
call by selecting the line while you are using it.
If a line normally has privacy disabled, this prevents another telephone
that shares the line from joining your call by selecting the line while you
are using it.
The privacy setting is re-established once you end your call or when
you enter the Privacy feature code again.
Ring Again ≤¤ Cancel ≤£¤
Monitor a busy or unanswered telephone, or a busy line pool within
your system. Ring Again signals you to call back when the telephone
or line pool becomes available.
Ring type ≤•fl
Select a distinctive ring to help differentiate between your telephone
and others nearby.
1. Press ≤•fl.
2. Enter the ring type number (⁄ to ›) then press ≥.
8. 6
Ring
volume
≤•°‚
Make your telephone ring so that you can adjust the volume. You can
also adjust the volume any time your telephone rings.
Run/Stop ≤•·
Store more than one autodial number or external carrier feature code
on one memory button by inserting a break point ß between numbers
or codes.
The first press of the button dials the first number or code; the next
press dials the next number or code. You can program up to four
numbers or codes separated by break points.
Saved
Number
Redial
≤fl‡
Save a number to redial later. Enter the code while you are on a call
that you have dialed to save the number. Enter the code when you are
not on a call to redial the saved number.
Service
Schedules
Show service schedules ≤°‡‚
Display the modes that have been turned on at a designated control
set.
Ringing service
≤°‡⁄ Cancel ≤£°‡⁄
Turn on one of six schedules for alternative ringing/call answering
arrangements from a designated control telephone.
Restrictions service
≤°‡¤ Cancel ≤£°‡¤
Turn on one of six services for restrictions on particular lines or
telephones from a designated control telephone. You will be required
to enter a password.
Routing services
≤°‡‹ Cancel ≤£°‡‹
Turn on one of six services for routing on particular lines or telephones
from a designated control telephone. You will be required to enter a
password.
Silent
monitoring
(Hunt
groups)
≤•fifi‚
If your two-line telephone has been designated as a supervisor
telephone, use this code to start monitoring members of a hunt group.
1. Press ≤•fifi‚.
2. Enter the SM password provided by your system administrator.
3. Enter the local (DN) of the Hunt group telephone you want to
monitor.
Note: If the telephone does not have a current call, or if the call is an
internal call, you will not be able to monitor the call.
9. 7
Speed Dial ≤‚
Dial an external telephone number using a three-digit code.
There are two types of speed dial codes: system (001 to 255) and user
(256 to 279).
System speed dial codes can be used from any display telephone in
the system. They are assigned by your system administrator.
To make a call using a speed dial code:
User speed dial codes are used exclusively at your telephone.
1. Press ≤‚.
2. Enter the three-digit code for the number.
To program user speed dial numbers:
User speed dial codes are used exclusively at your telephone.
1. Press ≤•›.
2. Enter a three-digit code from 256 to 279.
3. Specify an external line by pressing a line button, a line pool button,
or the intercom button. If you do not specify the line, the system
automatically chooses a line for the call.
4. Dial the telephone number you want to program (up to 24 digits).
5. Press ≥.
6. Record the code and number you have just programmed.
You cannot program user speed dial numbers while someone else is
programming your system. Codes you enter can be overridden by
your system administrator.
Static time
and date
≤°‚fl Cancel ≤£°‚fl
Change the first line of the display to the current time and date.
Time & date ≤°‚‹
Briefly display the time and date while you are on a call.
Transfer ≤‡‚
Send a call to another telephone within your system, or to an external
telephone. You may not be able to transfer a call on an external line
to an external telephone, depending on the capabilities of the lines.
1. Make or answer a call.
2. Press ≤‡‚.
3. Call the person you want to transfer the call to.
4. Stay on the line if you wish to speak to the person first.
5. Press ® to complete the transfer.
If an external call is transferred to a busy internal or network
extension, or is not answered after a few rings, the call automatically
rings you back.
10. 8
Call Display Services
The following features are available only if you subscribe to Call Display services or
to special line services from your local telephone company.
Trunk
Answer
≤°‚‚
Answer an external call that is ringing on a line that has been placed
into a Ringing Service schedule from any telephone in your system.
This feature does not work for a private line.
Voice call ≤flfl
Make a voice announcement or begin a conversation through the
speaker of another telephone without first making the other telephone
ring.
Voice call
deny
≤°° Cancel ≤£°°
Prevent your telephone from receiving voice calls. Do Not Disturb
(≤°fi) also prevents your telephone from receiving voice calls.
Wait for
dial tone
≤°‚›
Program in an external autodial number to cause the system to wait
to receive dial tone à from another system before proceeding with the
dialing sequence.
Autobumping ≤°⁄fi Cancel ≤£°⁄fi
Have the system automatically delete the oldest log item from a full
Call Log, so that a new log item can be stored.
Call
Information
≤°⁄⁄
Display the name, number or line name of a ringing or held call.
Press £ to move through the information displays.
Call Log ≤°⁄¤
Call Log displays use the following special characters:
1 (underline) identifies a new item
ø identifies answered calls
¤ identifies long distance calls
/ identifies that the information has been shortened
To view your Call Log:
1. Press • to view old items.
Press £ to view new items.
Press ‚ to return to the last viewed item.
2. Press £ and • to move through your items.
3. Press √ to view more information on an item.
11. 9
Call Log
continued
To erase a Call Log entry:
Press ≥ while viewing an item.
To return a call from your Call Log:
1. Display the desired number on your telephone.
2. Edit the number, if required. You can add numbers for long
distance dialing or line pool access or remove numbers using
√.
3. Press a line button.
4. Lift the handset.
Call Log
options
≤•°›
Select the type of calls that will automatically be stored in your Call
Log. Press £to see the next setting. Press ≥ to select the
displayed setting.
Call Log
password
≤•°fi
Program a four-digit password for your Call Log. To remove a
forgotten password, see your system administrator.
Logit ≤°⁄‹
Store caller information for your current call in your Call Log.
Malicious
Caller ID
(MCID)
≤°·‡
Store caller information on the service provider system for last
external call.
This feature only works if your system uses ETSI ISDN lines. Check
with your system administrator. The code must be invoked within 30
seconds after the caller hangs up, and before you hang up.
12. Meridian and Norstar are trademarks of Nortel Networks.
Meridian Norstar is manufactured by Nortel Networks.
This document is for use with Norstar ICS.
P0603537 Issue 02
Printed in Canada