Catalog for Flowserve Worcester Control industrial ball valves, pneumatic actuators and electric actuators, courtesy of Ives Equipment. Threaded, flanged, socket weld, cryogenic, Navy Approved,
The Model 1078 is a pilot-operated valve, specifically designed to reduce blanketing gas losses on lowpressure storage tanks. It opens and closes automatically as required, to maintain a closely controlled blanket pressure. The simple design, increases reliability and lowers maintenance cost.
In 1943 when Bonney Forge pioneered
the “Shape of Reinforcement” for branch connections, who would have thought it would fast become a
recog- nized industry standard. Today, Bon- ney Forge Branch Connections offer complete run pipe
reinforcement while avoiding cracks, fillet welds, and sharp re-entrant corner reinforcement taper-
ing at the sides, thus preventing abrupt changes in thickness where the fitting
joins the header pipe.
The Model 1078 is a pilot-operated valve, specifically designed to reduce blanketing gas losses on lowpressure storage tanks. It opens and closes automatically as required, to maintain a closely controlled blanket pressure. The simple design, increases reliability and lowers maintenance cost.
In 1943 when Bonney Forge pioneered
the “Shape of Reinforcement” for branch connections, who would have thought it would fast become a
recog- nized industry standard. Today, Bon- ney Forge Branch Connections offer complete run pipe
reinforcement while avoiding cracks, fillet welds, and sharp re-entrant corner reinforcement taper-
ing at the sides, thus preventing abrupt changes in thickness where the fitting
joins the header pipe.
WOM Group provides Floating Ball Valves with an exceedingly reliable and proven design offering maximum sealing against leaks. They have separate ball and stem design with a free floating ball preloaded between the seats during assembly.
Dycon valves are manufactured with ASTM pressure containment materials, tested in accordance with ASME section VIII of the specification and fully functionally tested before dispatch.
The unique pressure balance of the valve allows the regulator to be both internally and externally sensed – providing for various different types of control modes, some of which include pilot valves, loading regulators and P.I.P. Ratings of the valves conform to two standards namely 300# and 1500# ANSI class and are rare manufactured from a variety of materials.Ratings of the valves conform to two standards namely 300# and 1500# ANSI class and are rare manufactured from a variety of materials.
A comprehensive approach to tank design and tank equipment selectionMohieddin Hadidi
Tank design consideration to achieve safety;reduce risk of unplanned maintenance;ensuring working capacity and maintenance.
benefits of a fixed roof over your floating roof.
Common questions about full-contact roofs.
illustration of tank components.
tight-fitting seals
WOM’s Floating Ball Valves provide the user with an exceedingly reliable and proven design offering maximum sealing against leaks. WOM’s Floating Ball Valves have separate ball and stem design with a free floating ball preloaded between the seats during assembly.
WOM Group Manufacturers Floating Ball Valve with advanced technology. WOM’s Floating Ball Valves provide the user with an exceedingly reliable and proven design offering maximum sealing against leaks.
Terofox provides one stop service in diversity of valves’ procurement and ODM & OEM manufacturing, all our products and quality management procedures are in accordance with ISO 9001. Our wide range of products includes:
API608 Floating Stainless Steel Ball valve
API6D Trunnion Ball valves.
API 594 Dual plate check valves.
Concentric Butterfly Valves (Pins and Pinless / PTFE lining )
But our main focus is our “Special Product Line” in Taiwan that includes:
Sanitary Valves.
Cryogenic Valves: Used in the transmission of extreme low temperature services.
Special Alloy Valves: Some of the Materials we offer are Alloy 20, Monel, Hastelloy, Duplex/ Super Duplex Stainles Steel, Titanium and more.
Dead-man Return Ball Valves: Spring Return Handle that decreases the Torque for easier use.
Fugitive Emission ISO15848-1 certified : Safty is a trend nowadays, our low emission valve meets ISO15848-1 for eliminating fugitive emission
API607 6th Edition / ISO10497:2010 Fire Safe Approval ball valves - Flange Ball valves ( TF-20FS, TF-20DFS ), Trunnion Mounted Ball Valve ( TF-40FS, TF-44FS ) and high performance Ball Valve (EB-321DFS), Wafer Type Ball Valve ( TF-10MFS)
BS6363 Cryogenic Ball Valves
Marine Certified valves
Metal Seated Ball Valves : up to 600 Degree Celsius
3000psi/6000psi/10,000psi Ball Valves
In order to satisfy variety of requirements, we have applied for certificates such as ISO 9001, CE ( PED 97/23/EC ), API607 6th Edition Fire Safe Approved for floating and trunnion mounted ball valve, ABS PDA certificate, TA-Luft, ISO15848 for Fugitive Emmission applications, AD-2000, as well as foundry approvals: DNV, BV, LR certifications.
Our mission is to assist our customers in obtaining the best possible solutions to their requirements and needs, at the most advantageous prices, without compromising on delivery or quality. With this in mind, we believe in developing long terms relationships, based on mutual trust and honesty.
WOM Cementing and Circulating hose loops utilize the combination of WOM’s swivel joint flexibility and hose design for easy connection and storage for transportation.
WOM Group provides Floating Ball Valves with an exceedingly reliable and proven design offering maximum sealing against leaks. They have separate ball and stem design with a free floating ball preloaded between the seats during assembly.
Dycon valves are manufactured with ASTM pressure containment materials, tested in accordance with ASME section VIII of the specification and fully functionally tested before dispatch.
The unique pressure balance of the valve allows the regulator to be both internally and externally sensed – providing for various different types of control modes, some of which include pilot valves, loading regulators and P.I.P. Ratings of the valves conform to two standards namely 300# and 1500# ANSI class and are rare manufactured from a variety of materials.Ratings of the valves conform to two standards namely 300# and 1500# ANSI class and are rare manufactured from a variety of materials.
A comprehensive approach to tank design and tank equipment selectionMohieddin Hadidi
Tank design consideration to achieve safety;reduce risk of unplanned maintenance;ensuring working capacity and maintenance.
benefits of a fixed roof over your floating roof.
Common questions about full-contact roofs.
illustration of tank components.
tight-fitting seals
WOM’s Floating Ball Valves provide the user with an exceedingly reliable and proven design offering maximum sealing against leaks. WOM’s Floating Ball Valves have separate ball and stem design with a free floating ball preloaded between the seats during assembly.
WOM Group Manufacturers Floating Ball Valve with advanced technology. WOM’s Floating Ball Valves provide the user with an exceedingly reliable and proven design offering maximum sealing against leaks.
Terofox provides one stop service in diversity of valves’ procurement and ODM & OEM manufacturing, all our products and quality management procedures are in accordance with ISO 9001. Our wide range of products includes:
API608 Floating Stainless Steel Ball valve
API6D Trunnion Ball valves.
API 594 Dual plate check valves.
Concentric Butterfly Valves (Pins and Pinless / PTFE lining )
But our main focus is our “Special Product Line” in Taiwan that includes:
Sanitary Valves.
Cryogenic Valves: Used in the transmission of extreme low temperature services.
Special Alloy Valves: Some of the Materials we offer are Alloy 20, Monel, Hastelloy, Duplex/ Super Duplex Stainles Steel, Titanium and more.
Dead-man Return Ball Valves: Spring Return Handle that decreases the Torque for easier use.
Fugitive Emission ISO15848-1 certified : Safty is a trend nowadays, our low emission valve meets ISO15848-1 for eliminating fugitive emission
API607 6th Edition / ISO10497:2010 Fire Safe Approval ball valves - Flange Ball valves ( TF-20FS, TF-20DFS ), Trunnion Mounted Ball Valve ( TF-40FS, TF-44FS ) and high performance Ball Valve (EB-321DFS), Wafer Type Ball Valve ( TF-10MFS)
BS6363 Cryogenic Ball Valves
Marine Certified valves
Metal Seated Ball Valves : up to 600 Degree Celsius
3000psi/6000psi/10,000psi Ball Valves
In order to satisfy variety of requirements, we have applied for certificates such as ISO 9001, CE ( PED 97/23/EC ), API607 6th Edition Fire Safe Approved for floating and trunnion mounted ball valve, ABS PDA certificate, TA-Luft, ISO15848 for Fugitive Emmission applications, AD-2000, as well as foundry approvals: DNV, BV, LR certifications.
Our mission is to assist our customers in obtaining the best possible solutions to their requirements and needs, at the most advantageous prices, without compromising on delivery or quality. With this in mind, we believe in developing long terms relationships, based on mutual trust and honesty.
WOM Cementing and Circulating hose loops utilize the combination of WOM’s swivel joint flexibility and hose design for easy connection and storage for transportation.
Integral Connections, Integral Connections Oilfield Equipment - WOM Groupwomgroup
WOM Group provides Well Service Solutions including integral connections. All Integral Connections are subjected to controlled heat-treat processes to help integrity.
Learn how we design these components for high temperature, high pressure, and/or corrosive environments. Discover the different materials used based on a variety of applications. View some of the very unique and intricate Sweco custom designs, and corresponding technical drawings. Sweco designs and manufactures Pressure Vessels and Tanks, Pig Launchers and Receivers, Duct Work, Transition Pieces, Bellmouth Reducers, Spectacle and Line Blinds, Air Intake Stacks and Dampers, Conical Strainers, Instrument Stands and other custom fabricated products.
Pressure Balanced Adjustable Chokes are the advanced version of standard needle & seat type chokes, where the operating torque is significantly reduced by balancing the pressure across the gate.
Special Multistage Trim - Worldwide Oilfield Machinewomgroup
Special Multistage trim can be provided as a solution to severe service applications including anti cavitation, high pressure drop, and low noise services.
WOM Group provides Flowback choke that is designed with Hammer Union connections and is well suited for fracking, flow back, and well service applications.
Plug and Cage Choke - Worldwide Oilfield Machinewomgroup
The WOM control chokes are available with a plug & cage or an external sleeve trim. WOM's Plug and Cage Choke are designed to provide accurate flow control throughout its operating range.
Similar to Worcester Controls Industrial Valve and Actuator Catalog 2018 (20)
United Electric 2018 Short Form Product CatalogIves Equipment
United Electric Controls is a premier manufacturer of safety, alarm, and shutdown equipment, and is a a global supplier of pressure and temperature switches, transmitters, sensors, and controls for the process, discrete, semiconductor, aerospace, and defense industries.
Explosion Proof/Flame Proof (Ex D) Sensors for Hazardous Area Now Available i...Ives Equipment
Macnaught’s Positive Displacement Flow Meters are suitable for a wide range of industrial applications including fuel and oil distribution, corrosive chemical, solvent measurement and high pressure applications to name a few.
Macnaught is proud to now extend its range of pulse output options to include Ex D flame proof approved sensors for hazardous areas.
Working with hygenic applications is a question of care, attention to detail and dedication to outstanding performance. Alfa Laval has a proven track record in delivering innovative solutions for sanitary applications based on our core technologies of separation, heat transfer and fluid handling.
Superior safety, gentle efficiency and uncompromising cleanliness are the hallmarks of our hygenic valves and automation, pumps, heat exchangers, tubes and fittings, and separation, filtration and tank equipment. Which is why customers in the food, biopharm and other demanding industries put process performance and hygiene in our capable hands.
Through Alfa Laval’s broad range of spare parts, equipment, and services you get the support you need when you need it, performed by skilled and knowledgeable staff. Service kits and top quality spare parts, designed for durability and performance, are always available.
United Electric TX200 Pressure TransmitterIves Equipment
The TX200 is a compact, rugged pressure transmitter utilizing ASIC technology to provide optimum sensor signal conditioning and temperature compensation of the sensor output. It is designed for process control industries worldwide and ideally suited for petrochemical and upstream oil and gas applications. The TX200 provides a cost-effective solution to using conventional process transmitters.
The xed range model tX200B is recommended for use where process pressure is consistent within the range and where physical access to the transmitter is limited or not required.
The eld adjustable model tX200a allows access to zero and span the transmitter. The transmitter may be spanned up to 5:1 and for ease of calibration, does not require a calibrated pressure source and can be calibrated in-place.
By combining the new SITRANS FST030 transmitter with dependable SITRANS FSS200 sensors, Siemens has developed an exceptional clamp- on ultrasonic flow measurement solution: the SITRANS FS230.
Lead Free Regulations Impact on Selection of Potable Water ValvesIves Equipment
Recent legislation in several states has tightened regulation of lead content in the components of potable (drinkable) water treatment systems. Other states may well be considering similar moves. This pace of regulation seems unlikely to slacken.
This report examines the choices facing specifiers and purchasers of small solenoid valves for potable water systems. It weighs the advantage and disadvantages of brass, plastic, and stainless steel designs. Finally, it suggests the solutions that smart planners should consider for current and future use.
Vector System Image Processor for Water in Hydrocarbons and Particles in Hydr...Ives Equipment
Canty Process Technology specializes in many refinery applications. Some applications include oil in water / water in oil, hydrogen reformer cameras, and desalter monitors. The CANTY Inflow™ is a vision-based camera system used with the CANTY Vector System image processor for water in hydrocarbons and particles in hydrocarbons in a lab environment / at-line / in-line process. The presence of these two physical contaminants is a problem for equipment the hydrocarbon is entering.
Electronic and Electromechanical Switches for Vacuum, Pressure, Differential Pressure, and Temperature; Specialty Transmitters for Functional Safety, Process Monitoring and Control; Industrial Temperature Sensors
The One Series Safety Transmitter is a transmitter-switch for monitoring pressure or temperature and meets the requirements of SIL 2 for random integrity at HFT = 0, SIL 3 for random integrity at HFT = 1 and SIL 3 for systematic capability. The One Series Safety Transmitter incorporates UE’s patented IAW self diagnostics, redundant and diverse signal processing and software algorithms to detect abnormalities in the process and internal faults. The design is based on a powerful microprocessor that provides an extremely fast response time for emergency shutdown situations.
With the knowledge that no single technology can address the needs of all industrial appli- cations, Siemens provides a complete range of level measurement devices.
Ultrasonics. Radar. Guided wave radar. Capacitance. Point level. Gravimetric. Hydrostatic.
Reliable. Easy to use. With convenient remote monitoring displays and industrial communi- cation options. All backed by Siemens global support network, providing experienced sales and technical assistance when and where you need it. Complementing our level technology are Siemens analytics, automation, and drives for industries around the globe.
Use of Process Analyzers in Fossil Fuel PlantsIves Equipment
In spite of all efforts concerning energy savings and efficiency, the growing world population and the aspired higher 'standard of living' will lead to a further in- crease of world energy demand. In this context, almost half of the primary energy demand will continue to be covered by solid fuels, particularly by coal, until 2020 and many years beyond.
Technolog Water Utility Data Logger Cello 4SIves Equipment
A remote telemetry outstation delivering a scalable machine to machine (M2M) solution reducing user operating and capital costs.
Multiple site parameters are monitored, recorded and transmitted over 2G (SMS/GPRS) or 3G networks, providing a comprehensive multi-application solution for the Utilities and Industry.
SensAlert ASI Advanced Safety Integrity Gas TransmitterIves Equipment
SensAlert ASI provides enhanced protection and dependability for critical safety applications where personnel, processes, and facilities are at risk. The third-party certified SIL-2 SensAlert ASI offers dependability and versatility while remaining the easiest to install, commission, operate, and maintain.
Instrumentation, Automation and Control Solutions for the Grain IndustryIves Equipment
Over a century and a half later, mechanized equipment is now an essential part of the grain industry, from planting and growing to harvesting, handling, and milling grain. Your challenges are still the same as those of nineteenth century grain operators, though – how can you improve processes and cut costs while also increasing safety?
Due to its full metal design, the SITRANS FVA250 variable area meter with a standard length of 250 mm (9.84 inch) can be used to measure many different types of liquids and gases passing through closed piping. The robust design means that it can also be used in harsh conditions. The various types of flange connec- tions, linings and float materials satisfy the requirements of the pharmaceutical and chemical industries.
The measured value is displayed directly on the scale with the standard version. For process monitoring and control, the device can be equipped with a transmitter (MEM) as well as limit switches.
Double Offset High Performance Butterfly ValvesIves Equipment
Soft Seated, metal seated and fire safe.
Free floating seat design. API 609, API 598, API 607, MSS-SP-68.
Underneath Drawn Gland Packing.
Wafer, Lugged, Double Flanged, Butt-welded in double and triple offset design.
Direct mount operation.
Material Compatibility / Corrosion Guide for Process EquipmentIves Equipment
This chart is a guide to the engineer in the selection of materials for corrosive services. No one material can be expected to handle the wide variety of corrosive media found in industry today. Therefore, the user must decide, based on experience, which properties are of prime importance in their application.
The process equipment in contact with the media should carry an A Rating. This chart is intended to be a guide, and if any questions exist on the application of a material, actual tests should be performed to determine the suitability of the material.
Simple Ways to Maximize the Efficiency of Your Process Control Application Wh...Ives Equipment
Integrated Drive Systems (IDS) for any industry.
No matter what industry you’re in, the price of your inputs is bound to fluctuate – usually trending in a direction that doesn’t favor profits. You can’t control the rising costs of raw materials and energy, but you can control how much you get out of them. The simplest way to do this is by maximizing the efficiency of your equipment.
Accurate and adaptable temperature measurement in a streamlined packageIves Equipment
For exceptional temperature measurement accuracy combined with the flexibility for integration into a wide range of process industry applications, Siemens introduces the SITRANS TS500 series of temperature sensors. The modular design of the SITRANS TS500 allows for a high level of customization with the use of standardized individual components, including thermowell, extension and connection head. The sensor can also be paired with a SITRANS T transmitter and optional display to provide an easy-to-understand readout of all process variables.
Precise control of low O2 set points with confidence.
CO detection for control interlocks and safety shutdown.
Predictive diagnostics
SIL 2 capable for SIS implementation of IEC 61508/61511 into the burner management system.
CFD Simulation of By-pass Flow in a HRSG module by R&R Consult.pptxR&R Consult
CFD analysis is incredibly effective at solving mysteries and improving the performance of complex systems!
Here's a great example: At a large natural gas-fired power plant, where they use waste heat to generate steam and energy, they were puzzled that their boiler wasn't producing as much steam as expected.
R&R and Tetra Engineering Group Inc. were asked to solve the issue with reduced steam production.
An inspection had shown that a significant amount of hot flue gas was bypassing the boiler tubes, where the heat was supposed to be transferred.
R&R Consult conducted a CFD analysis, which revealed that 6.3% of the flue gas was bypassing the boiler tubes without transferring heat. The analysis also showed that the flue gas was instead being directed along the sides of the boiler and between the modules that were supposed to capture the heat. This was the cause of the reduced performance.
Based on our results, Tetra Engineering installed covering plates to reduce the bypass flow. This improved the boiler's performance and increased electricity production.
It is always satisfying when we can help solve complex challenges like this. Do your systems also need a check-up or optimization? Give us a call!
Work done in cooperation with James Malloy and David Moelling from Tetra Engineering.
More examples of our work https://www.r-r-consult.dk/en/cases-en/
Overview of the fundamental roles in Hydropower generation and the components involved in wider Electrical Engineering.
This paper presents the design and construction of hydroelectric dams from the hydrologist’s survey of the valley before construction, all aspects and involved disciplines, fluid dynamics, structural engineering, generation and mains frequency regulation to the very transmission of power through the network in the United Kingdom.
Author: Robbie Edward Sayers
Collaborators and co editors: Charlie Sims and Connor Healey.
(C) 2024 Robbie E. Sayers
Sachpazis:Terzaghi Bearing Capacity Estimation in simple terms with Calculati...Dr.Costas Sachpazis
Terzaghi's soil bearing capacity theory, developed by Karl Terzaghi, is a fundamental principle in geotechnical engineering used to determine the bearing capacity of shallow foundations. This theory provides a method to calculate the ultimate bearing capacity of soil, which is the maximum load per unit area that the soil can support without undergoing shear failure. The Calculation HTML Code included.
Final project report on grocery store management system..pdfKamal Acharya
In today’s fast-changing business environment, it’s extremely important to be able to respond to client needs in the most effective and timely manner. If your customers wish to see your business online and have instant access to your products or services.
Online Grocery Store is an e-commerce website, which retails various grocery products. This project allows viewing various products available enables registered users to purchase desired products instantly using Paytm, UPI payment processor (Instant Pay) and also can place order by using Cash on Delivery (Pay Later) option. This project provides an easy access to Administrators and Managers to view orders placed using Pay Later and Instant Pay options.
In order to develop an e-commerce website, a number of Technologies must be studied and understood. These include multi-tiered architecture, server and client-side scripting techniques, implementation technologies, programming language (such as PHP, HTML, CSS, JavaScript) and MySQL relational databases. This is a project with the objective to develop a basic website where a consumer is provided with a shopping cart website and also to know about the technologies used to develop such a website.
This document will discuss each of the underlying technologies to create and implement an e- commerce website.
Immunizing Image Classifiers Against Localized Adversary Attacksgerogepatton
This paper addresses the vulnerability of deep learning models, particularly convolutional neural networks
(CNN)s, to adversarial attacks and presents a proactive training technique designed to counter them. We
introduce a novel volumization algorithm, which transforms 2D images into 3D volumetric representations.
When combined with 3D convolution and deep curriculum learning optimization (CLO), itsignificantly improves
the immunity of models against localized universal attacks by up to 40%. We evaluate our proposed approach
using contemporary CNN architectures and the modified Canadian Institute for Advanced Research (CIFAR-10
and CIFAR-100) and ImageNet Large Scale Visual Recognition Challenge (ILSVRC12) datasets, showcasing
accuracy improvements over previous techniques. The results indicate that the combination of the volumetric
input and curriculum learning holds significant promise for mitigating adversarial attacks without necessitating
adversary training.
Welcome to WIPAC Monthly the magazine brought to you by the LinkedIn Group Water Industry Process Automation & Control.
In this month's edition, along with this month's industry news to celebrate the 13 years since the group was created we have articles including
A case study of the used of Advanced Process Control at the Wastewater Treatment works at Lleida in Spain
A look back on an article on smart wastewater networks in order to see how the industry has measured up in the interim around the adoption of Digital Transformation in the Water Industry.
NO1 Uk best vashikaran specialist in delhi vashikaran baba near me online vas...Amil Baba Dawood bangali
Contact with Dawood Bhai Just call on +92322-6382012 and we'll help you. We'll solve all your problems within 12 to 24 hours and with 101% guarantee and with astrology systematic. If you want to take any personal or professional advice then also you can call us on +92322-6382012 , ONLINE LOVE PROBLEM & Other all types of Daily Life Problem's.Then CALL or WHATSAPP us on +92322-6382012 and Get all these problems solutions here by Amil Baba DAWOOD BANGALI
#vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore#blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #blackmagicforlove #blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #Amilbabainuk #amilbabainspain #amilbabaindubai #Amilbabainnorway #amilbabainkrachi #amilbabainlahore #amilbabaingujranwalan #amilbabainislamabad
2. Table of Contents
Section Page
Product Index.............................................. 3
Valve
3-piece..................................................... 4
Flanged.................................................... 5
Wafer....................................................... 6
Directional............................................... 6
Special Service
Fugitive Emissions............................... 6
Chlorine............................................... 7
Firesafe................................................ 7
Cryogenic............................................. 7
High Purity........................................... 8
Tank Bottom........................................ 8
High Pressure...................................... 9
Control................................................. 9
Actuation
Actuator
Electric................................................. 10
Pneumatic............................................ 11
Switch Box
End Mount........................................... 12
Top Mount........................................... 12-13
Positioner
Pneumatic............................................ 14
Electric................................................. 15
To Access Literature On-line
More information about FLOWSERVE products can be
obtained on-line. It’s easy to find… it’s free… and you do
not need a password.
Do This:
Go to www.flowserve.com/library
Search the library
The most recent version of each product bulletin will be
available on this site.
Once you have the PDF, you can:
• read it
• print it
• download it
• even e-mail it
Enter criteria Enter keyword or
literature number
or
Ives Equipment
www.ivesequipment.com
(877) 768-1600
4. Series 44
3-Piece Regular Port
Series 59
3-Piece Full Port
Features
• 3 Piece Regular Port design Ball Valve
• ASME class 600 design
• Meets ASME B16.34 requirements
(consult Pressure/Temperature Charts)
• “Live loaded” stem seal design
• Multiple soft and metal seat options
• Tight Shut off and Bi-Directional sealing
• Cavity Filled Designs
• Special Service Applications:
UL, FM, USCG and other Special service
approvals
• Locking Device as standard
Sizes
• ¼˝ to 2˝
• Screwed end
• Socket weld
• Butt weld, Solder ends (Brass only)
Materials
• Carbon Steel
• Stainless Steel
• Brass
• Monel
• Alloy 20
• Hastelloy-C
Standards
• ASME B16.34
• S.E. to ASME B 2.1
• S.W. to ASME B 16.11
Get more information:
Product brochure:
• WCABR1050
IOM:
• WCENIM2030
See page 2.
Series 45/59
3-Piece Larger Sizes
Three-Piece
4
Features
• 3 Piece Full Port design Ball Valve
• ASME class 600 design
• Meets ASME B16.34 requirements
(consult Pressure/Temperature Charts)
• “Live loaded” stem seal
• Multiple soft and metal seat options
• Tight Shut off and Bi-Directional Sealing
• Cavity Filled Designs
• Full Port design minimizes pressure drop
across the valve and maintains a high
efficiency,reducing pumping cost.
• Locking Device as standard
Sizes
• ¼˝ to 2˝
• Screwed end
• Socket weld
• Butt weld, Solder ends (Brass only)
Materials
• Carbon Steel
• Stainless Steel
• Brass
• Monel
• Alloy 20
• Hastelloy C
Standards
• ASME B16.34
• S.E. to ASME B 2.1
• S.W. to ASME B 16.11
Get more information:
Product brochure:
• WCABR1050
IOM:
• WCENIM2030 (for Miser)
• WCENIM2054 (for FM)
See page 2.
Features
• Large-diamater, 3 Piece design Ball Valve
• ASME Class 300 design
• Three piece design allows valve to act as a valve
and union
• Large diameter bore for O.E.M. equipment and
packaging systems
• Compact design with multiple options
• Tight Shut off and Bi-Directional sealing
• Cavity Filled Designs
Sizes
• 45 Series 2½" to 6"
59 Series 2½ to 4"
• Screwed end
• Socket weld
• Butt weld
Materials
• Carbon Steel
• Stainless Steel
Standards
• ASME B16.34
• S.E. to ASME B 2.1
• S.W. to ASME B 16.11
Get more information:
Product brochure:
• WCABR1050
IOM:
• WCENIM2046
See page 2.
Ives Equipment
www.ivesequipment.com
(877) 768-1600
5. www.flowserve.com
Flanged
Series 51/52
Flanged Regular Port
Series F519/F529
Flanged Full Port
5
Series F819/F829
Flanged Full Port
Features
• Flanged Regular Port Unibody Design
• ASME class 150/300
• Tight shut-off
• “Live loaded” stem seal
• Multiple soft and metal seat options
• Wide variety of Body, Seat and Seal materi
als means dependable, high cycle control on
Steam, Petroleum products, Chemicals and
abrasive liquids
• Pre-drilled mounting holes for actuation
• Tight Shut off and Bi-Directional sealing
Sizes
• 1/2˝ to 10“ Flanged
• ASME 150# and 300# class
Materials
• Carbon Steel
• Stainless Steel
Standards
• ASME B16.34
Get more information:
Product brochure:
• WCABR1013
IOM:
• WCENIM2014 (for smallvalves)
• WCENIM2015 (for large valves)
• WCENIM2052 (for FM)
See page 2.
Features
• Flanged Full Port Unibody Design
• ASME class 150/300
• ISO 5211 mounting
• “Live loaded” stem seal
• Multiple soft and metal seat options
• Full Port design minimizes pressure drop
across the valve and maintains a high
efficiency,reducing pumping cost.
• Wide variety of Body, Seat and Seal materi-
als means dependable, high cycle control on
Steam, Petroleum products, Chemicals and
abrasive liquids
• Firesafe by design
Sizes
• ½˝ to 1½˝
• ASME 150# and 300# class
Materials
• Carbon Steel
• Stainless Steel
Standards
• ASME B16.34
• API 607 Fire Test
Get more information:
Product brochure:
• WCENBR0032
IOM:
• WCEIM0519
See page 2.
Features
• Flanged Full Port Split Body Design
• ASME class 150/300
• ISO 5211 mounting
• Full Port design minimizes pressure drop
across the valve and maintains a high
efficiency,reducing pumping cost.
• Wide variety of Body, Seat and Seal materi-
als means dependable, high cycle control on
Steam, Petroleum products, Chemicals and
abrasive liquids
Sizes
• 2˝ to 8˝
• ASME 150# and 300# class
Materials
Carbon Steel
Stainless Steel
Standards
• API 6D
• API 607 4th Edition
• ASME B16.34
• NACE MRO1-75
Get more information:
Product brochure:
• WCENBR0032
IOM:
• WCENIM0013 (for std. valve)
• WCENIM2057 (for fugitive emission)
See page 2.
Ives Equipment
www.ivesequipment.com
(877) 768-1600
6. Wafer,DirectionalandFugitiveEmissions
6
Series 151 and 301
Wafer Pattern
Series D44/D4, D51, 18/19
Directional
Series 94, 94-150, 94-300,
94-600
Fugitive Emission
Features
• Wafer Design
• Designed for light weight.
• Symmetrically balanced to avoid side loads
from actuation 40-60% less weight than
conventional ball valves
• Suitable for Steam processes including veg-
etable peelers, Steam ejectors, Distilleries,
and more.
Sizes
• 3˝ to 6˝
• ASME 150# and 300# class
• Rated at 720 CWP
Materials
• Bronze
• Carbon Steel
• Stainless Steel
• Ductile iron
Get more information:
Product brochure:
• WCABR1041
IOM:
• WCENIM2015
See page 2.
Features
• Multi-port Diverter Valves
• Three-piece or flanged design
• Bottom entry or side entry
• Full port or regular port
• 90 or 180 degree operation
• The D51 cast flanged have similar
operations as the D44/D4 but for larger sizes
• The D44/D4 3-piece diverter valve is designed
to accept media through a bottom inlet port
and direct it to either of two outlet ports
• ASME 150 flanges
• The 18/19 Series is extremely adaptive
. Up to 5 ports
. multiple seat and body materials
. regular or full port
. Optional fugitive emission design
. Class 150 or 300
. Screwed, socket or butt weld and slip-on
flanges
Sizes
½˝ to 2˝ for D44/D4 3-piece valve
2˝ to 8˝ for D51 Flanged valve
1˝ to 6˝ for Series 18 & 19 valve
Materials
Carbon Steel
Stainless Steel
Standards
ASME B16.34
API 607 Fire Test
Get more information:
Product brochure:
• WCABR1052
IOM:
• WCENIM2030 (for Miser)
• WCENIM2015 (for large valves)
• WCENIM0009 (for 18/19)
See page 2.
Features
• Specially designed to control and minimize
fugitive Emissions.
• Outstanding performance on high-cycle
applications, where no stem leakage is
allowed
• Double „live loaded“ Stem seal design
• High Vacuum capability
• High cycle capability
• Suitable for Category M services
• Pressure classes to ASME 600
Sizes
• ½˝ to 2˝ 3 piece design
• Screwed end
• Socket weld
• Butt weld
• ½˝ to 8˝ Flanged design
Materials
• Carbon Steel
• Stainless Steel
• Hastelloy-C trim option
Standards
• ASME B16.34
• S.E. to ASME B 2.1
• S.W. to ASME B 16.11
• API 607 Fire Test
Get more information:
Product brochure:
• WCABR1023
IOM:
• WCENIM2003 (for Series 94)
• WCENIM2057 (for Series E818/828)
See page 2.
Ives Equipment
www.ivesequipment.com
(877) 768-1600
7. www.flowserve.com
Chlorine,Firesafe,Cryogenic
7
Series CL94, CL44, CL 51/52
Cholrine
Series AF44, FZ44, AF51/52, FZ51/52,
FM51/52, AF94, FZ94,F519/529, F819/829
Firesafe
Series C4, C44, and C51
Cryogenic
Features
• Special for Chlorine Service
• Liquid and gas
• Relief vent in ball vents to the high pressure
side
• Constructed in accordance with the recom-
mendations of the Chlorine Institute includ-
ing special testing, cleaning and packaging
• Available with 94 FEM stem design
• Assembled in Class 1000 clean room
• Pressure classes to ASME 600
Sizes
• ½˝ to 2˝ 3 piece design
• Screwed end
• Socket weld
• Butt weld
• ½˝ to 4˝ Flanged design
Materials
Carbon Steel/Monel Trim
Standards
• ASME B16.34
• Chlorine Institute Pamphlet 6
• MSS-SP-72, B31.1, B31.3
Get more information:
Product brochure:
• WWCABR1039
IOM:
• WCENIM2003 (for series 94)
• WCENIM2014 (for small 51/52)
• WCENIM2015 (for large 51/52)
• WCENIM2030 (for Miser)
See page 2.
Features
• Fire-Safe Valves
• Ensure operational integrity before, during,
and after a fire.
• Tight Shut off, Anti static, no external leak-
age
• Available with 94 FEM stem design
• Pressure classes to ASME 600
Sizes
• ½˝ to 2˝ 3 piece design
• Screwed end
• Socket weld
• Butt weld
• ½˝ to 10˝ Flanged design
Standards
• ASME B16.34
• API 607 Fire Test
• EXES 3-14-1-2A
• FM 7440
Get more information:
Product brochure:
• WCABR1029
IOM:
• WCENIM2003 (for series 94)
• WCENIM2014 (for small 51/52)
• WCENIM2015 (for large 51/52 & 151/301)
• WCENIM2020 (for series 818/828)
• WCENIM2030 (for Miser)
• WCENIM2047 (for series 82/83)
• WCENIM2052 (for 51/52 FM)
• WCENIM2054 (for O&G shutoff FM)
• WCENIM2057 (for fugitive emissions)
See page 2.
Features
• Cryogenic Services
• High-performance, shutoff valves for inter-
mittent and continuous flow applications
with temperatures to -425°F
• Positive Ball/Cavity relief with V3 vent hole
• Zero Leak packing
• Effective Bonnet Extensions
• Valves designed for low thermal stress, auto-
mation and Fire Safety
• Assembled in Class 1000 clean room
• Pressure classes to ASME 600
Sizes
• ½˝ to 2˝ 3 piece design
• Screwed end
• Socket weld
• Butt weld
• ½˝ to 6˝ Flanged design
Materials
• Brass
• Stainless Steel
Standards
• ASME B16.34
• API 607 Fire Test
Get more information:
Product brochure:
• WCABR1040
IOM:
• WCENIM2006 (for R12/R6 or earlier)
• WCENIM2038 (for std. valve)
See page 2.
Ives Equipment
www.ivesequipment.com
(877) 768-1600
8. HighPurity,TankBottom
8
Series WK74
High Purity
Series WK70
High Purity
Series TB59
Tank Bottom
Features
• High Purity, Cast 316L - Tube bore
• Class 100 Clean Room Assembly
• 20Ra interior surface finish
• Controlled ferrite <5%
• Controlled sulfer for orbital welding
• CMTRs standard
Sizes
• 3" to 4" 3 piece design
• Extended butt weld
• Hygienic Clamp
Materials:
• ASTM A351-CF3M, ASTM A479
• Interior Surface Finish: 20Ra standard,
15Ra electropolished
• Seats/Seals: PTFE, Polyfill
Standards
• ASME BPE
• FDA(21CFR)
• USP VI
• USDA
Applications
• High purity and aseptic processes, sterile
steam, high purity water, fermentation,
lyophilization, food processing
Get more information:
Product brochure:
• WCABR1037
IOM:
• WCAIM2018
See page 2.
Features
• High Purity, Forged F316L - Tube bore
• Class 100 Clean Room Assembly
• 20Ra interior surface finish
• Controlled ferrite <1%
• Controlled sulfur for orbital welding
• CMTRs
Sizes
• ½" to 2" 3 piece design
• Extended butt weld
• Hygienic Clamp
Materials:
• ASTM A182 F316L, ASTM A479
• Interior Surface Finish: 20Ra standard,
15Ra electropolished
• Seats/Seals: PTFE, Polyfill
Standards
• ASME BPE
• FDA(21CFR)
• USP VI
• USDA
Applications
• Pharmaceutical/Biotech, microelectronics,
steam distribution and distillation,
fermentation, lyophilization, food and beverage
Get more information:
Product brochure:
• WCABR1036
IOM:
• WCAIM2018
See page 2.
Features
• Flush, Tank-bottom Drain valve
• For Biotech, Pharmaceutical, Food, Chemical
and Cosmetic Processing
• Worcester 3 pc design advantages with a
tank bottom end piece design.
• Available prepared for O2 and vacuum
services
• Pressure classes to ASME 300
Sizes
• 1˝ to 4˝ 3 piece design
• Screwed end
• Socket weld, Butt weld
Get more information:
Product brochure:
• WCENBR1028
IOM:
• WCENIM2001
See page 2.
Ives Equipment
www.ivesequipment.com
(877) 768-1600
9. HighPressure,ControlValves
www.flowserve.com
9
Series 4, H44 and PT
High-per Mizer
Series CPT
Control Valve
Features
• High-Pressure Valves
• Resilient seated valves for High pressure and
• High Temperature applications
• Pressures above ASME 600 to 5000 psi
• Used in Steam, Hydraulics, gasses and
fluids and CNG
Sizes
• ½˝ to 2˝ 3 piece design
• Screwed end
• Socket weld,Butt weld
• ½˝ to 6˝ Flanged design
• 3" to 6" Wafer design
Standards
• ASME B16.34
• S.E. to ASME B 2.1
• S.W. to ASME B 16.11
(Consult product catalog)
Get more information:
Product brochure:
• WCABR1051
IOM:
• WCENIM2015 (for large 51/51)
• WCENIM2030 (for Miser)
See page 2.
Features
• The CPT is a characterized seat Control Valve
with a revolutionary design
• Precision Control,high capacity
• Zero external leakage
• High Cycle Capacity
• Custom-cut Characterized Seats
• High Rangeability
• Efficient Shearing Action
Sizes
• ½˝ to 2˝ 3-piece design
• Screwed end
• Socket and Butt weld
• ½˝ to 4˝ Flanged design
• 3" to 6" Wafer design
• Pressure classes to ASME 600
(Consult Literature)
Standards
• ASME B16.34
• S.E. to ASME B 2.1
• S.W. to ASME B 16.11
(Consult product catalog)
Get more information:
Product brochure:
• WCABR1001
IOM:
• WCENIM2009 (for series 94)
• WCENIM2040 (for series 44,51,52)
See page 2.
Series H71
Hydromizer
Features
• High-Pressure Valves
• Resilient seated valves for High pressure and
• High Temperature applications
• ASME Class 1500 (1" to 2")
• ASME Class 2500 (½" & ¾")
(Consult Brochure for PT curves and limita-
tions)
• Used in Steam, Hydraulics, gasses and
fluids, CNG and Subsea
Sizes
• ½˝ to 2˝ 3 piece design
• Screwed end
• Socket weld,Butt weld
Standards
• ASME B16.34
• S.E. to ASME B 2.1
• S.W. to ASME B 16.11
(Consult product catalog)
Get more information:
Product brochure:
• WCABR1051
IOM:
• WCENIM2024
See page 2.
Ives Equipment
www.ivesequipment.com
(877) 768-1600
10. ElectricActuator
10
Series F72
Electro-Hydraulic Actuator
Series 36
Electric Actuator
Series 75
Electric Actuator
Features
• Compact size
• Permanently lubricated and sealed gear train
• Thermal overload protection
• Simple mounting and installation
• Additional output switch
• Solid-State timer option for automatic
cycling
Torque Range
• 150 in-lb and 550 in-lb output torques
Temperature Range
• 0 F to 150 F
Supply Voltage
• 120, 240 VAC
Enclosure
• NEMA 1, 4 and 4X
Applications
• Industrial quarter-turn ball valves
OEM installations
• Air Drying Equipment
• Sampling systems
• Compressor installations
• Condensate draining
• Tank draining
Get more information:
Product brochure:
• WCABR1006 (36 Series)
• WCABR1007 (36T Series)
IOM:
• WCAIM2007
See page 2.
Features
• Two year warranty
• Baked epoxy coated
• Permanently lubricate gear train
• Manual override
• Thermal overload protection
• Reversable rotary operation
Optional Features
• Extended duty cycle motors
• Fail safe capability
• Positioners and P.I.D. controllers
• Hard anodised coating
Torque Range
• 150 - 3000 in-lbs
Temperature Range
• -40 F to 150 F
Supply Voltage
• 120, 240 VAC, 12, 24 VDC
Enclosure
• NEMA 4, 4X
Hazardous Area Classification
• Class 1, Div 1, Groups C, D
Applications
• Process control for rotary valves, dampers
and multi-turn chokes
• Boiler feed water
• Temperature control (steam, thermal fluid)
• Chemical, Power, Water/Waste Water, Food
& Beverage, HVAC
Get more information:
Product brochure:
• WCABR1014
IOM:
• WCAIM2013
See page 2.
Features
• Fail-safe on power failure
• Fast moving valve closure
• Long operational life
• No hydraulic reservoir- mounts in any position
• No clutches, battery packs or clock springs
• Simple 2-wire control
• Two Year Warranty
• FM Approved
• Cost-effective
Torque Range
• Up to 900 in-lbs ( end of spring )
Temperature Range
• 0 F to 150 F
Supply Voltage
• 120, 240 VAC, 24 VDC
Enclosure
• NEMA 4, 4X
Hazardous Area Classification
• Class 1, Div 1, Groups B, C, D
• FM 7411
Applications
• Oil & Gas Safety Shut Off
• Tank Farms
• Water/Waste Water
• Burner Management
• Oil Field Steam Generators
• Dampers
Get more information:
Product brochure:
• WCENBR1022
IOM:
• WCAIM2049
See page 2.
Ives Equipment
www.ivesequipment.com
(877) 768-1600
11. PneumaticActuator
www.flowserve.com
11
Series 34
Pneumatic Actuator
Series F39
Pneumatic Actuator
ACCESS
Pneumatic Actuator
Features
• Compact Scotch-Yoke design
• Baked epoxy coating
• Minimum air consumption
• Adjustable speed control
• Single external air and electrical connections
• Fail-safe spring return option
• Built-in solenoid air pilot
• High temperature option
Torque Range
• Up to 1000 in-lbs @ 100 psi input
Temperature Range
• -25 F to 160 F, Optional to 250 F
Supply Voltage
• 12, 24 VDC, 24, 120, 240, 480 VAC
Enclosure
• NEMA 1, 4, 4x
Hazardous Area Classification
• Class 1, Div 1, Groups A, B, C, D
Applications
• Industrial Qtr-Turn valve automation
• Automative, OEM, Chemical & Water
Get more information:
Product brochure:
• WCENBR1004
IOM:
• WCAIM2008
See page 2.
Features
• High Performance, High Cycle Design
• Two-Year warranty
• Twin piston, double rack & pinion
• Extruded, anodized aluminum body
• NAMUR, ISO mounting
• Polished stainless steel guide rods
• Multi-spring force transfer
• End cap air supply ports
• End mount solenoid/switch accessories
• Limit stops
Torque Range
•Up to 60,000 in-lbs @ 120 psi input
Temperature Range
• -40 F to 212 F; (high temp option 300F)
Supply Voltage
• 12, 24 VDC, 24,120, 240 VAC
Pressure Range
• 30-120psi DA, 40-120psi SR
Enclosure
• NEMA 1, 4, 4x
Hazardous Area Classification
• Class 1, Div 1, Groups A, B, C, D
Applications
• Chemical, Petrochemical & Refining,
• Power, Oil & Gas, Food & Beverage
Get more information:
Product brochure:
• WCENBR1003
IOM:
• WCENIM2036
See page 2.
Features
• Integral solenoid & position switch
• Single electrical connection
• High flow spool valve
• Manual override and speed control
• No mounting brackets
• Diagnostic LED circuit board
• Digital bus networks
Torque Range
• Up to 60,000 in-lbs @ 120 psi input
Position Switch
• SPDT/DPDT, Gold Contact, Proximity
Temperature Range
• 0 F to 160 F
Supply Voltage
• 12, 24 VDC, 24,120, 240 VAC
Pressure Range
• 40 to 120 psi
Enclosure
• NEMA 4, 4X
Hazardous Area Classification
• Class 1, Div 1, Groups B, C, D
• Intrinsically Safe, NRTL/C approved
UL CSA approved
Applications
• Digital Bus Networks, Chemical,
• Petrochemical & Refining, Oil & Gas,
• Food & Beverage, Pharmaceutical
Get more information:
Product brochure:
• WCABR1024
IOM:
• WCAIM2027 (standard)
• WCAIM2028 (intrisically safe)
• WCAIM2023 (DeviceNet)
• WCAIM2032 (AS-i)
See page 2.
Ives Equipment
www.ivesequipment.com
(877) 768-1600
12. Series ELK39
End Mounted Switch Box
Series WWS/WWM
Top Mounted Switch Box
Series WPS/WPM
Top Mount Switch Box
Switches
12
Features
• End mount versus top mount
• Reduced assembly height
• Reduced installation envelope
• Eliminates mounting kits
• Multiple switch options
• Aluminum enclosure
• CSA & FM Approvals
Housing Material
• Die cast aluminum, epoxy coated
Enclosure
• NEMA 4, 4X; CSA approved
Hazardous Area Classifications
• Class1, Div1, Groups C,D
• Class1, Div2, Groups E,F, G
Position Switch
• SPDT/DPDT, Gold Contact, Proximity
Temperature Range
• 0 to 160 F
Switch Ratings
• SPDT-15 Amp, 125, 250, 480 VAC; 1/2A, 24 VDC
• DPDT-10Amp, 125, 250 VAC; 0.3A,125 VDC
• Proximity Sensor - (5-200mA, 20-140 VAC,
10-140 VAC, UL listed, CSA Certified)
Applications
• Remote position indication
• Relay device for pumps
• Alarms and indicator lights
• Industrial, Chemical, Petrochemical installa-
tions
Get more information:
Product brochure:
• WCABR1027
IOM:
• WCAIM2051
See page 2.
Features
• UltraDome visual position indicators for high
contrast, wide angle viewing
• Compliance to NAMUR VDI/VDE 3845
mounting specifications eliminates coupler
and maximizes interchangeability
• Captive stainless steel cover screws
• Prewired multipoint terminal strip
• Quick-Set spring loaded cams are extra wide
and splined to permit tool-free limit switch
calibration
• Extensive switch offering for a wide range of
applications including mechanical,
proximity and solid state feedback options
Description
Provides a compact and economical glob-
ally certified weatherproof, non-incendive or
intrinsically safe package for visual and remote
electrical indication of valve position.
Housing Material
Die cast aluminum; dichromate conversion
undercoat; electrostatic powder top coat
Engineered resin enclosure; 25-33% fiberglass-
filled for harsh, corrosive applications
Enclosure
• IP66, IP67, NEMA 4, 4x
Hazardous Area Classifications
• Intrinsically Safe ATEX II 1GD Ex ia IIC T4/
T5/T6
• Intrinsically Safe cCSAus, Cl. I, Div. 1, Gr.
A,B,C,D, Cl. II, Div. 1, Gr. F,G, Cl. III T3
• 1, Gr. A,B,C,D, Cl. II, Div. 1, Gr. F,G, Cl. III T3
• Non-Incendive cCSAus, Cl. I, Div. 2, Gr.
A,B,C,D, Cl. II, Div. 2, Gr E,F,G T3"
Get more information:
Product brochure:
• WCENBR0135
IOM:
• WCENIM0135
See page 2.
Features
• UltraDome visual position indicators for
high contrast, wide angle viewing
• Compliance to NAMUR VDI/VDE 3845
mounting specifications eliminates coupler
and maximizes interchangeability
• Captive stainless steel cover screws
• Prewired multipoint terminal strip
• Quick-Set spring loaded cams are extra
wide and splined to permit tool-free limit
switch calibration
• Extensive switch offering for a wide range
of applications including mechanical,
proximity, solid state and analog feedback
options
Description
Engineered resin enclosure provides excellent
protection in harsh, corrosive environments.
Globally-certified weatherproof, non-incendive
or intrinsically safe package for visual and
remote electrical indication of valve position.
Housing Material
Engineered resin enclosure; 25 - 33%
fiberglass-filled for harsh, corrosive
applications
Enclosure
• IP66, NEMA 4, 4x
Hazardous Area Classifications
• Intrinsically Safe ATEX II 1G Ex ia IIC T4/
T5/T6
• Increased Safety ATEX II 2G Ex e mb IIC T6
• Intrinsically Safe IECEX Ex ia IIC T4/T5/T6
• Intrinsically Safe cFMus/cCSAus, Cl. I,II,III,
Div. 1, Gr. A,B,C,D,E,F,G T5
• Non-Incendive cFMus/cCSAus, Cl. I, Div. 2,
Gr. A,B,C,D, Cl. II, Div. 2, Gr E,F,G T5
Get more information:
Product brochure:
• WCENBR0134
IOM:
• WCENIM2075
See page 2.
Ives Equipment
www.ivesequipment.com
(877) 768-1600
13. 13
www.flowserve.com
Switches
13
Series WXCL
Top Mounted Switch Box
Aviator BUSwitch
Top Mount Integrated Valve
Controller
Description
Designed for use with pneumatic rotary
industrial valve actuators in hazardous
locations. With the same features as the
UltraSwitch, the Aviator provides actuator/
valve control by receiving a direct solenoid
voltage signal. Also provides remote
indication of open and closed valve posi-
tions by completing separate electrical cir-
cuits. The BUSwitch provides actuator/valve
control by receiving a direct solenoid voltage
signal. Also provides remote indication of
open and closed valve positions by complet-
ing separate electrical circuits. Available in the
following CAN bus protocols: AS-i, DeviceNet,
Foundation Fieldbus and Profibus DP.
Housing Material
• Aluminum (WNXV models)
• Engineered Resin (WR model)
Enclosure
• IP65, NEMA 4, 4X, 7 and 9
Hazardous Area Classifications
• Flameproof ATEX II 2G Ex d IIB T3/T4
• Flameproof IECEX Ex d IIB T3/T4 IP65
• Explosion-Proof cCSAus Cl. I, Div. 1, Gr. C
& D, Cl. II, Div. 1, Gr. E,F,G, Div. 2 F,G, Cl.
III
• Flameproof cCSAus Cl. 1, Zone 1, Gr. IIB, Ex
d IIB T3/T4 IP65, Aex d IIB T3/T4 IP65
• Non-Incendive cCSAus Class I, Div. 2, Gr.
A,B,C,D
• Intrinsically Safe FM(US/CAN)/cCSAus, Cl.
I,II,III, Div. 1, Gr. A,B,C,D,E,F,G T5
Get more information:
Product brochure:
• WCENBR1057
IOM:
• AXENIOM0100
See page 2.
Features
• UltraDome visual position indicators for high
contrast, wide angle viewing
• Compliance to NAMUR VDI/VDE 3845
mounting specifications eliminates coupler
and maximizes interchangeability
• Captive stainless steel cover screws
• Prewired multipoint terminal strip
• Quick-Set spring loaded cams are extra wide
and splined to permit tool-free limit switch
calibration
• Extensive switch offering for a wide range of
applications including mechanical,
proximity, solid state, and analog feedback
options
Description
• Provides a heavy-duty and rugged globally certi-
fied explosion-proof package for visual and
remote electrical indication of valve position
Housing Material
• Die cast aluminum; dichromate conversion
undercoat; electrostatic powder top coat
Enclosure
• IP66, IP67, NEMA 4, 4X, 7 and 9
Hazardous Area Classifications
• Flameproof ATEX II 2GD Ex d IIB T5, Ex tD
A21 IP66/IP67
• Flameproof IECEX Ex d IIB T5, Ex tD A21
IP66/IP67
• Explosion-Proof cCSAus Cl. I, Div. 1, Gr. C &
D, Cl. II, Div. 1, Gr. E,F,G, Cl. III, T3
• Non-Incendive cCSAus Cl. I, Div. 2, Gr.
A,B,C,D T3
• Intrinsically Safe FM(US/CAN)/cCSAus, Cl.
I,II,III, Div. 1, Gr. A,B,C,D,E,F,G T5
• KOSHA Ex d IIB T5
• INMETRO Ex d IIB T5 Gb, Ex tb IIIC T100 °C Db
IP65
Get more information:
Product brochure:
• WCENBR1057
Product Specification :
WCENPS1056
IOM:
• WCENIM2076
See page 2.
Series DS/DM UltraSwitch™
Top Mounted Switch Box
Features
• Tool-free Quick-Set™
cams
• Switches available in a wide range of
options
• Easily accessed pre-wired terminal strip
• Minimum two open terminals are provided
• Housing of aluminum or corrosion
resistant stainless steel
• Optional 4-20mA feedback signal
Description
Compact housing in aluminium or corro-
sion resistant stainless steel can be directly
and easily mounted onto actuators for both
rotary and linear indication and can be used
as a junction box for direct connection of
solenoid valves. Up to three cable entries
and pre-wired switches to enable easy
installation.
Housing Material
• Aluminum
• Stainless steel
Enclosure
IP66, NEMA 4, 4X, 7 and 9
Hazardous Area Classifications
• Flameproof ATEX II 2G Ex d IIC T4 Gb, Ex
tb IIIC T113 °C Db IP66
• Flameproof IECEX Ex d IIC T4 Gb, Ex tb
IIIC T113 °C Db IP66
• Explosion-Proof CSA Cl. I, Div. 1, Gr.
B,C,D, Cl. II, Div. 1, Gr. E,F,G, Cl. III T4
• Explosion-Proof CSAus Cl. I, Div. 1, Gr.
A,B,C,D, Cl. II, Div. 1, Gr. E,F,G, Cl. III T4
Get more information:
Product brochure:
• WCENBR0136
IOM:
• WCENIM0136
See page 2.
Ives Equipment
www.ivesequipment.com
(877) 768-1600
14. Positioners
14
Series APEX W7000
Top Mount Positioner
Series APEX W8000
Top Mount Positioner
Series L93 Pulsair
Top Mount Positioner
Features
• Linear and rotary actuator control
• Loop powered, microprocessor design
• Simple user interface
• High visability graphic display
• Auto calibration
• Two-stage air delivery
• Piezoelectric low power control
• “Zero” air bleed design
• Digital communication options
• NAMUR output, ISO mounting
Housing Material
• Die cast aluminum, epoxy paint
• Stainless steel
Enclosure
• IP66, NEMA 4x
Hazardous Area Classification
• ATEX - EExd, EEx ia, EEx nl
• CSA - Class1, Div1, Groups BCDEFG
I.S. - Class1, Div1, Group A,B,C,D
• FM - Class1, Div1, Groups B,C,DI.
I.S. - Class1, Div1, Group A,B,C,D
Temperature Range
• -22F to 185F
Accessories
• Position indication, fail freeze, remote mount
Applications
• High performance digital process control for linear
and rotary actuators for modulating control
Get more information:
Product brochure:
• AWCABR1019
IOM:
• WCAIM2055
See page 2.
Description
Compact, rugged design provides accurate
valve positioning at a competitive price.
Available with pneumatic and electro-
pneumatic input options that can be field
retrofitted.
Housing Material
Die cast aluminum with electrostatic epoxy
powder coating or TUFRAM®
Severe Service
Coating
Features
• Non-interactive zero and span adjustment
greatly simplifies and reduces calibration.
• Interchangeable I/P Modules allow
positioner to be field converted for 3-15 psi
or 4-20 mA input signals
• Multiple cam options allow configuration
of positioner characteristics to match valve
requirements
• Gold-plated spool valves available in low or
high flow versions to match actuator/valve
load requirements
• Low-profile flat or optional UltraDome
visual indicator provides full-area, wide
angle viewing of valve position.
• Top-Mounted UltraSwitch optional for
position feedback requirements
Enclosure
NEMA 4, 4x
Hazardous Area Classifications
• FM/CSA Class I, Divisions 1 and 2,
Groups B,C,D
• FM/CSA Class II, Groups E, F, G
• ATEX II 2 G EEx d IIB + H2
• ATEX II 2 G EEx d IIC
• FM Intrinsically Safe ATEX II 2 G EEx ia IIC
• FM Intrinsically Safe Class I, Division 1,
Groups A,B,C,D
Get more information:
Product brochure:
• AXENBR0006
See page 2.
Description
The APEX 8000 positioner provides extremely
precise control for a wide range of valve and
damper applications.
The two-stage pneumatic relay provides faster,
more sensitive response characteristics to
meet the most demanding control objectives.
Pneumatic and electro-pneumatic input
options available that can be field retrofitted.
Also available with many advanced features
such as limit switch feedback, analog feedback
and UltraDome visual position indicators.
Housing Material
Die cast aluminum with electrostatic powder
coating or optional epoxy coating
Enclosure
NEMA 4, 4x, 7 and 9
Hazardous Area Classifications
• FM Class I, Divisions 1 & 2, Groups B,C,D,
Class II, Divisions 1 & 2, E,F,G
• FM Intrinsically Safe Class I, Division 1,
Groups A, B, C, D T4
• FM Class I Zone 0 AEx ia IIC T4
• FM Non-incendive Class I, Division 2,
Groups A, B, C, D T4
• ATEX Intrinsically Safe II 1 G EEx ia IIC T6
• FM Class I, Division 2, IIC T4
• ATEX II 2 GD EEx d IIB + H2 T6
Get more information:
Product brochure:
• AXENBR0007
IOM:
• WCENIM2078
See page 2.
Ives Equipment
www.ivesequipment.com
(877) 768-1600
15. 15
www.flowserve.com
Positioners
Series AF17
Electric Actuator Positioner
Series DFP17 DataFlo
Electric Actuator Positioner
Series DFC17 DataFlo
Electric Actuator Controller
Features
• Solid-state circuit board
• Multiple signal inputs
• LED calibration
• Deadband control
• Direct and reverse acting
• Position feedback
Housing Material
• Die cast aluminum, epoxy paint
Supply Voltage
• 12, 24 VDC, 120, 240 VAC
Standard Inputs
• 1-5mA, 4-20mA, 10-50mA, 0-135 ohm
0-1000 ohm, 0-5 VDC, 0-10 VDC
Temperature Range
• -40F to 150F
Accessories
• Analog output module
Applications
• Position control for rotary electric actuators
to control valves and dampers.
Get more information:
Product brochure:
• WCABR1000
IOM:
• WCAIM 2031
• WCAIM2050
See page 2.
Features
• Microprocessor control
• Pushbutton calibration
• Speed control
• Electronic travel stops
• Adjustable dead band
• Multiple I/O options
• Digital network communications
• 20 programmable functions
Housing Material
• Die cast aluminum, epoxy paint
Supply Voltage
• 12, 24 VDC, 120, 240 VAC
Standard Inputs
• 1-5mA, 4-20mA, 10-50mA, 0-135 ohm,
0-1000 ohm, 0-5 VDC, 0-10 VDC
Temperature Range
• -40F to 150F
Accessories
• Analog output module
Applications
• High performance control for Qtr-turn and
Multi-turn rotary electric actuators for modu-
lating control of valves and dampers.
Get more information:
Product brochure:
• WCENBR1021
IOM:
• WCAIM2037
See page 2.
Features
• Microprocessor PID control
• Autotuning
• Local process control
• Pushbutton calibration
• Performance monitoring
• Mulitple I/O options
• Modbus network communications
• RS485 network communications
• Desktop software
Housing Material
• Die cast aluminum, epoxy paint
Supply Voltage
• 24 VDC, 120, 240 VAC
Standard Inputs
• 4-20mA, RTD, Thermocouple
Temperature Range
• -40F to 150F
Accessories
• Analog output, 24VDC power supply
Applications
• Direct process control (P.I.D.) for flow, tem-
perature, pressure, level and Ph applications.
Primary industires: Food & beverage, OEM,
Industrial & Automotive
Get more information:
Product brochure:
• WCENBR1021
IOM:
• WCENIM2026
See page 2.
Ives Equipment
www.ivesequipment.com
(877) 768-1600