This document summarizes a presentation about developing Internet of Things (IoT) devices using Windows 10 IoT Core. It discusses the Windows 10 IoT platform and Universal Windows Platform (UWP) app model. It also describes several hardware devices that can be used for prototyping IoT devices, including Raspberry Pi 2, barcode scanners, NFC boards, and wireless adapters. The presentation addresses issues with drivers and peripherals and provides workarounds.

1. www.xedotnet.org
XeIdentityDevice - Windows
10 IoT Core, a "real case"
Mirco Vanini
Microsoft® MVP Windows Hardware Engineering (IoT, Mobile, and
Desktop)

2. Platform Convergence
Windows 10 for Industry Devices
Windows Universal App Platform
The hardware parts
Put all together
04/04/16 2
Agenda

3. 04/04/16 3
Platform Convergence Journey

4. 04/04/16 4
Windows 10 for Industry Devices

5. 04/04/16 5
Windows 10 Industry Editions

6. 04/04/16 6
Windows Universal App Platform

7. 04/04/16 7
Building IoT Devices with UAP

8. 04/04/16 8
Porting Existing Apps/Drivers to Windows 10 IoT for Small Devices

9. A 900MHz quad-core ARM Cortex-A7 CPU
1GB RAM
4 USB ports
40 GPIO pins
Full HDMI port
Ethernet port
Combined 3.5mm audio jack and
composite video
Camera interface (CSI)
Display interface (DSI)
Micro SD card slot
VideoCore IV 3D graphics core
04/04/16 9
Raspberry PI 2 Model B

10. Interfaces: PS2, RS-232, USB-HID,
USB Virtual COM, WAND, OPOS, JPOS
BarCode (1D): UPC/EAN/JAN, UPC-A
& UPC-E, EAN-8 & EAN-13, JAN-8 &
JAN-13, ISBN/ISSN, Code 39, Codabar,
Code 128 & EAN 128, Code 93, ITF 2
of 5, IATA Code, MSI, China Postal
Code, Code 32, Industrial 2 of 5,
Standard 2 of 5, JAP, Code 11, GS1
DataBar, GS1 DataBar Limited, GS1
DataBar Expanded
04/04/16 10
AXON – CS2200

11. NFC Forum device requirements V1.3
compliant for all modes
Integrated communication protocols to
support Read/Write, Peer-to-Peer, and
Card Emulation mode
Supports NFC Forum Type 1/2/3/4/5 Tags
Drivers for easy integration into Linux,
Android and Windows IoT based systems
NCI over I²C host interface
PN7120 NFC Controller Board: Main
board including a PN7120 NFC controller,
an integrated antenna, an option for
custom antennas as well as unified
connectors to the interface boards
04/04/16 11
NXP - PN7120 NFC Controller SBC

12. USB Wireless N 150Mbps
Seamlessly compatible with
802.11b/g/n products
Advanced Security: Supports WEP,
WPA/WPA2, WPA-PSK/WPA2-PSK
04/04/16 12
TP-LINK TL-WN725N

13. 04/04/16 13
Barcode scanner issues
Barcode Reader HID doesn't works !
(PointOfService API)
Windows-universal-samples - Barcode scanner sample
“you can use barcode scanners from various manufacturers
that adhere to the USB HID POS Scanner specification.”

14. 04/04/16 14
Barcode scanner workaround
Win 10 IoT Core: Raspberry Pi 2
Peripherals – Connected Devices: USB
HID Peripherals

15. 04/04/16 15
USB – Serial Device Driver
Installing the FTDI D2XX drivers on the Raspberry PI
1. go to [device-name]c$windowssystem32 , login with username: [device-
name]administrator and the administrator password
2. copy ftdi.d2xx.winrt.cat and FTDI.D2xx.WinRT.inf from libD2xx WinRT
1.0.2driver to the folder above
3. start a remote powershell (as administrator) session to the Raspberry PI: ◦start
the remote service: net start WinRM
a) add the Raspberry PI to the TrustedHosts if you haven't already: set-Item
WSMan:localhostClientTrustedHosts -Value [device-name]
b) start the session with: enter-pssession -computername [device-name] -credential [device-
name]administrator this can take up to 30 seconds or more, so be patient
4. type cd c:windowssystem32 to go to the folder where the drivers are located
5. install the FTDI D2XX driver using the following command: devcon.exe dp_add
FTDI.D2xx.WinRT.inf
6. reboot the device: shutdown /r /t 0
7. when rebooted reconnect again using last part of step 3

16. 04/04/16 16
SerialDevice – Discover
var deviceQuery = SerialDevice.GetDeviceSelectorFromUsbVidPid(vid, pid);
var deviceInfo = await DeviceInformation.FindAllAsync(deviceQuery);
var currentDeviceInfo = deviceInfo.FirstOrDefault();
serialDevice = await SerialDevice.FromIdAsync(currentDeviceInfo.Id);
<Capabilities>
<Capability Name="allJoyn" />
<Capability Name="internetClient" />
<Capability Name="internetClientServer" />
<DeviceCapability Name="proximity" />
<DeviceCapability Name="serialcommunication">
<Device Id="any">
<Function Type="name:serialPort" />
</Device>
</DeviceCapability>
</Capabilities>
<Device Id="vidpid:24EA 0187">

17. 04/04/16 17
NXP OM5577 NFC board driver issues
OM5577 Raspberry Pi Win10 IoT demo image
PN7120 Windows IoT Porting Guidelines
PN7120 on Windows IoT
ID : ACPIPN71202&DABA3FF&0
StatusCode : 25175040
ProblemCode : 28
Code 28
The drivers for this device are not
installed. (Code 28)

18. 04/04/16 18
NXP OM5577 NFC board driver workaround
“there was a regression in the OS that prevents devcon.exe
from installing the driver on 10586”
NXP OM5577 NFC board driver broken on 10586
NFC / NDEF Library for Proximity APIs
Extension library to the NFC / NDEF library

19. DEMO
22/02/16 19

20. 04/04/16 20
Who I am
www.adamfactory.com
mirco.vanini@adamfactory.com
@MircoVanini
Mirco Vanini
Microsoft® MVP Windows Hardware Engineering
(IoT, Mobile, and Desktop)

21. 04/04/16 21
Feedback
http://goo.gl/forms/zEvkGxYde1

22. 04/04/16 22
A special thanks…
The event was sponsored by
http://www.tustena.com/it