Which one of the following theories is associated with the interactio.pdf
•
0 likes•2 views
Which one of the following theories is associated with the interactionist perspective? cultural transmission sociobiology social conflict none of these Solution we know that In sociology, interactionism is a theoretical perspective that derives social processes (such as conflict, cooperation, identity formation) from human interaction So, sociobiology is realated with interactionism option-B is correct.
Report
Share
Report
Share
Download to read offline
Recommended
You have just been promoted to the job of CIO for Disney in Orlando,.pdf
You have just been promoted to the job of CIO for Disney in Orlando, Florida. lists and
discusses the top ten tasks you will work on and why these tasks are important in this new role.
Solution
Chief information officer (CIO) is an administrative position given to a person at an enterprise in
charge of information technology (IT). He develops strategy and the computer systems required
to maintain enterprise’s objectives and goals.
Top ten tasks are stated as below-.
What types of cells do Endostatins go afterSolutionEndostatin.pdf
What types of cells do Endostatins go after?
Solution
Endostatin is a cleaved product from the carboxyl-terminal of collagen XVIII.
It become firstly located in conditioned media from a murine endothelial tumor cell line,
hemangio-endothelioma.
Endostatin inhibits endothelial cellular migration in vivo and in vitro and induces endothelial
cell apoptosis.
It inhibits tumor growth and impairs blood vessel maturation in wound healing.
Endostatin has an vital position in endothelial cellular adhesion and cytoskeletal organization.
Endostatin may be located in vessel walls (elastic fibers) and basement membranes.
Recombinant Endosatin expressed in yeast causes G1 arrest of endothelial cells, and endostatin
remedy outcomes in apoptosis of HUVE and HMVE cells..
What is the main role of traffic engineering in planning a VoIP s.pdf
What is the main role of traffic engineering in planning a VoIP system? In your own words?
What is the main role of traffic engineering in planning a VoIP system? In your own words?
Solution
the main role of a traffic engineer is as fallowes:
Network Readiness Assessment
designing the network
dividing into modules and gain insight into it and proper maintainance of heirarchy
internet protocal routimg
internet protocal addresing
proper maintainance in the service as well as quality
making the correct and effecient analysisregarding the configurations as well as topologyies that
are existed in the network
Accurate maintainance of traffic simulations.
What are important abiotic factors in functioning and biotic structu.pdf
What are important abiotic factors in functioning and biotic structure of specific biomes such as
tundra, rainforest, grasslands, etc.
Solution
An ecosystem is a community of living organisms in conjunction with the nonliving components
of their environment (things like air, water and mineral soil), interacting as a system. These
biotic and abiotic components are regarded as linked together through nutrient cycles and energy
flows.
1.TUNDRA ECOSYSTEM:
Abiotic factors: Temperature, Precipitation (rain, hail and snow fall), Seasons (very long winters
and short summers), Altitude (depends on whether it is alpine tundra or arctic tundra),Wind
(strong in tundra),Permafrost. Only the top layer of soil thaws during the summer, so trees cannot
grow, A lot of rocks.
Biotic Factors: The biotic factors that contain the alpine tundra are living organisms that impact
the growth, composition, and structure of the alpine (e.g., insects, herbivores, humans). Also
vegatation and symbiotic relationships.
2.RAIN FOREST:
Biotic Factors:
Biotic factors are any living things in an envirnment. The tropical rainforest is full of life with
apoximately 15 million different species of animals. A few examples of the many biotic feature
are the rubber and bamboo trees, sloths, anteaters, poison dart frogs, lemurs, bromeliads, etc.
Abiotic factors:
Abiotic factors of the rainforest include soil, water, rocks, light, and climate.
3.GRASSLAND ECOSYSTEM:
Abiotic factors: climate,Parental material and soil,
biotic factors:.
What are the evolutionary advanteges of evolving radulaSolution.pdf
The radula is a ribbon-like structure found in molluscs that functions similarly to a tongue, containing small teeth used for mastication during feeding. It provides evolutionary advantages for molluscs by aiding in feeding through its chitinous structure with teeth that bend sideways. The radula is not present in bivalve molluscs and can be either monopartite or bipartite.
Two parallel wires separated by 4.3 cm repel each other with a force .pdf
Two parallel wires separated by 4.3 cm repel each other with a force per unit length of 1.8
Times 10^-4 Nm. The current in one wire is 5.1 A. Find the current in the other wire. Are the
currents in the same direction or In opposite directions? What would happen if the direction of
one current were reversed and doubled?
Solution
a) F/L = mu0 I1 * I2 / 2 pi r
1.8 * 10-4 = (4 pi * 10-7 * 5.0 * I2) / (2 pi * 0.043)
I2 = 7.74 A
b) Opposite directions
c) If the direction of one current were reversed and doubled the wires would attract each other.
This is the second time I post this question. I got an incorrect ans.pdf
This is the second time I post this question. I got an incorrect answer, so I had to post it again....
Please read the question; you need to draw. 8. In order to determine the overall chromosome map
for a new wild type strain of E. coli, three Hfr strains were obtained by independent insertions of
the F factor. The start times of transfer of several genes were determined during conjugation
matings between each Hfr strain and an F recipient carrying six auxotrophic mutations Time
(min) of marker transfer 2 Hfr Strain: Gene Ade His 15 15 37 65 35 13 50 40 10 Lys Bio Met 30
20 45 A. Using the times taken to begin transfer of each marker, draw a unified chromosome
map of the chromosome of this strain of E. coli, showing its total length in minutes of transfer
and the order and relative distances between these markers B. Show the position and orientation
of the F factor in each Hfr strain.
Solution
Short time duration represents the marker is near the start codon and longest time duration
represents the codon present at end of the sequence..
The virtualization concept is used at many levels and for various re.pdf
The virtualization concept is used at many levels and for various reasons. For example, it is used
on your machine to run virtual machines, it is used in data and computing centers to provide
servers and clusters, it is used in networking to provide virtual ports, …etc. Write a 250 word
essay about this topic showing how virtualization can take place and the main advantages gained
by virtualization in each case.
Solution
Virtualization means it is a combination of both software and hardware technologies to design
virtual machines. The main advantage of it is we can run multiple operating system in a single
platform which is used to seperate their hardware lines.Virtual machine moniter is the important
and main thing in the virtualization which acts as the bridge between the control and
tranmslation system. Intel virtual technology is combined with the virtualization and helps for
the vmms to work more efficiently. The main advantage with the virtualization it can adopt any
type of new technology that is releasing in new era and can use for multiple operating systems. If
any thin wrong happens at the stage of server crashing and all it will be very difficult to reinstall
and take again the work but coming to this virtualization if it was happened we can simply copy
the virtual image and reinstall all what we have lost. It helps while system gets crashed and loose
important information and then after if any overloading happened then it commits and maybe
helpfull. It mostly secured for the data that is available and recovery options are there to get back
those information what we have lost. Virtualization Technology provides a way to address
virtualization funcyions and helps support for CPU and I/O virtualization and a strong VMM
ecosystem. The future of enterprise IT management will be based on virtual computing. the
virtualization delivers some improved troubleshooting and fault resolution..
Recommended
You have just been promoted to the job of CIO for Disney in Orlando,.pdf
You have just been promoted to the job of CIO for Disney in Orlando, Florida. lists and
discusses the top ten tasks you will work on and why these tasks are important in this new role.
Solution
Chief information officer (CIO) is an administrative position given to a person at an enterprise in
charge of information technology (IT). He develops strategy and the computer systems required
to maintain enterprise’s objectives and goals.
Top ten tasks are stated as below-.
What types of cells do Endostatins go afterSolutionEndostatin.pdf
What types of cells do Endostatins go after?
Solution
Endostatin is a cleaved product from the carboxyl-terminal of collagen XVIII.
It become firstly located in conditioned media from a murine endothelial tumor cell line,
hemangio-endothelioma.
Endostatin inhibits endothelial cellular migration in vivo and in vitro and induces endothelial
cell apoptosis.
It inhibits tumor growth and impairs blood vessel maturation in wound healing.
Endostatin has an vital position in endothelial cellular adhesion and cytoskeletal organization.
Endostatin may be located in vessel walls (elastic fibers) and basement membranes.
Recombinant Endosatin expressed in yeast causes G1 arrest of endothelial cells, and endostatin
remedy outcomes in apoptosis of HUVE and HMVE cells..
What is the main role of traffic engineering in planning a VoIP s.pdf
What is the main role of traffic engineering in planning a VoIP system? In your own words?
What is the main role of traffic engineering in planning a VoIP system? In your own words?
Solution
the main role of a traffic engineer is as fallowes:
Network Readiness Assessment
designing the network
dividing into modules and gain insight into it and proper maintainance of heirarchy
internet protocal routimg
internet protocal addresing
proper maintainance in the service as well as quality
making the correct and effecient analysisregarding the configurations as well as topologyies that
are existed in the network
Accurate maintainance of traffic simulations.
What are important abiotic factors in functioning and biotic structu.pdf
What are important abiotic factors in functioning and biotic structure of specific biomes such as
tundra, rainforest, grasslands, etc.
Solution
An ecosystem is a community of living organisms in conjunction with the nonliving components
of their environment (things like air, water and mineral soil), interacting as a system. These
biotic and abiotic components are regarded as linked together through nutrient cycles and energy
flows.
1.TUNDRA ECOSYSTEM:
Abiotic factors: Temperature, Precipitation (rain, hail and snow fall), Seasons (very long winters
and short summers), Altitude (depends on whether it is alpine tundra or arctic tundra),Wind
(strong in tundra),Permafrost. Only the top layer of soil thaws during the summer, so trees cannot
grow, A lot of rocks.
Biotic Factors: The biotic factors that contain the alpine tundra are living organisms that impact
the growth, composition, and structure of the alpine (e.g., insects, herbivores, humans). Also
vegatation and symbiotic relationships.
2.RAIN FOREST:
Biotic Factors:
Biotic factors are any living things in an envirnment. The tropical rainforest is full of life with
apoximately 15 million different species of animals. A few examples of the many biotic feature
are the rubber and bamboo trees, sloths, anteaters, poison dart frogs, lemurs, bromeliads, etc.
Abiotic factors:
Abiotic factors of the rainforest include soil, water, rocks, light, and climate.
3.GRASSLAND ECOSYSTEM:
Abiotic factors: climate,Parental material and soil,
biotic factors:.
What are the evolutionary advanteges of evolving radulaSolution.pdf
The radula is a ribbon-like structure found in molluscs that functions similarly to a tongue, containing small teeth used for mastication during feeding. It provides evolutionary advantages for molluscs by aiding in feeding through its chitinous structure with teeth that bend sideways. The radula is not present in bivalve molluscs and can be either monopartite or bipartite.
Two parallel wires separated by 4.3 cm repel each other with a force .pdf
Two parallel wires separated by 4.3 cm repel each other with a force per unit length of 1.8
Times 10^-4 Nm. The current in one wire is 5.1 A. Find the current in the other wire. Are the
currents in the same direction or In opposite directions? What would happen if the direction of
one current were reversed and doubled?
Solution
a) F/L = mu0 I1 * I2 / 2 pi r
1.8 * 10-4 = (4 pi * 10-7 * 5.0 * I2) / (2 pi * 0.043)
I2 = 7.74 A
b) Opposite directions
c) If the direction of one current were reversed and doubled the wires would attract each other.
This is the second time I post this question. I got an incorrect ans.pdf
This is the second time I post this question. I got an incorrect answer, so I had to post it again....
Please read the question; you need to draw. 8. In order to determine the overall chromosome map
for a new wild type strain of E. coli, three Hfr strains were obtained by independent insertions of
the F factor. The start times of transfer of several genes were determined during conjugation
matings between each Hfr strain and an F recipient carrying six auxotrophic mutations Time
(min) of marker transfer 2 Hfr Strain: Gene Ade His 15 15 37 65 35 13 50 40 10 Lys Bio Met 30
20 45 A. Using the times taken to begin transfer of each marker, draw a unified chromosome
map of the chromosome of this strain of E. coli, showing its total length in minutes of transfer
and the order and relative distances between these markers B. Show the position and orientation
of the F factor in each Hfr strain.
Solution
Short time duration represents the marker is near the start codon and longest time duration
represents the codon present at end of the sequence..
The virtualization concept is used at many levels and for various re.pdf
The virtualization concept is used at many levels and for various reasons. For example, it is used
on your machine to run virtual machines, it is used in data and computing centers to provide
servers and clusters, it is used in networking to provide virtual ports, …etc. Write a 250 word
essay about this topic showing how virtualization can take place and the main advantages gained
by virtualization in each case.
Solution
Virtualization means it is a combination of both software and hardware technologies to design
virtual machines. The main advantage of it is we can run multiple operating system in a single
platform which is used to seperate their hardware lines.Virtual machine moniter is the important
and main thing in the virtualization which acts as the bridge between the control and
tranmslation system. Intel virtual technology is combined with the virtualization and helps for
the vmms to work more efficiently. The main advantage with the virtualization it can adopt any
type of new technology that is releasing in new era and can use for multiple operating systems. If
any thin wrong happens at the stage of server crashing and all it will be very difficult to reinstall
and take again the work but coming to this virtualization if it was happened we can simply copy
the virtual image and reinstall all what we have lost. It helps while system gets crashed and loose
important information and then after if any overloading happened then it commits and maybe
helpfull. It mostly secured for the data that is available and recovery options are there to get back
those information what we have lost. Virtualization Technology provides a way to address
virtualization funcyions and helps support for CPU and I/O virtualization and a strong VMM
ecosystem. The future of enterprise IT management will be based on virtual computing. the
virtualization delivers some improved troubleshooting and fault resolution..
Step by step procedures how layout is created and used for transistor.pdf
Step by step procedures how layout is created and used for transistor fabrication?
Solution
CMOS transistors are fabricated on silicon wafer Lithography process similar to printing press
On each step, different materials are deposited or etched Easiest to understand by viewing both
top and cross-section of wafer in a simplified manufacturing process.
Show all work. I need to know exactly how you got what you got so I .pdf
Show all work. I need to know exactly how you got what you got so I can do the others on my
own.
A host computer with an IP address of 10.10.20.5 using a subnet mask of 255.255.192.0 pings a
computer with an IP address of 10.10.10.5. What happens to the data packet?
a. The data packet is sent to the gateway.
b. The data packet is sent to 10.10.20.192.
c. The 10.10.10.5 is not in the same LAN; therefore, the data packet is sent out as a broadcast.
d. The data packet is sent to the 127.0.0.1 network.
e. None of the above
Solution
C. Data packet is sent out as a broadcast as you can see the IP 10.10.10.5 is in different network.
Here the network is 10.10.x.x.
Identify the three main threats to biodiversity and explain how each.pdf
Identify the three main threats to biodiversity and explain how each damages diversity?
Solution
Answer) Three main threats to biodiversity are listed in details below;
a) Deforestation and habitat loss - deforestation refers to permanently destructing the forests to
make the land of forest be available for other uses. deforestation is performed by large scale
burning of forests which makes a large part of unnecessary carbon emission to the environment.
deforestation cause the loss in plant diversity (earlier available in those forests) as well as loss in
fauna lived in those forests.
b) Climate change - change in climatic conditions is a natural process which occurs at a very
slow rate. but climate change due to human activities a rapid process which affect the
environment in long terms. rapid climate change does not provide sufficient time for adaptation
and a large part of biodiversity is lost. particularly, aquatic ecosystem is primarily affected by
climate change. such climate change conditions are rising oceanic temperature, high carbon
emission in environment, global warming etc.
c) Overexploitation - To fulfil the requirements of rapid growing world population, often natural
resources are exploited blindfold and over exploiting these resources result in loss of biodiversity
such as over-harvesting lead that variety vulnerable to loss in its genetic diversity, overfishing
makes that fish species vulnerable to extinction. there are other ways of overexploitation such as
killing, hunting, poaching which result in losing diversity of fauna being exploited..
Q6. Proteins are used for structural integrity inside and outside of.pdf
Q6. Proteins are used for structural integrity inside and outside of animal cells, but carbohydrates
are not.
a. TRUE
b. FALSE
Q7. A deficit in oxygen supply would cause levels of NAD+ to…
a. become elevated
b. remain unchanged
c. become reduced
Solution
Q6.
a. TRUE
Carbohydrates are mostly energy source for cells,
Q7. A deficit in oxygen supply would cause levels of NAD+ to…
c. become reduced
Under anaerobic conditions NADH accumulates since there is no oxygen to oxidize NAD+..
Python question...Complete without importing any modules. Ie. Don.pdf
Python question...
Complete without importing any modules. Ie. Don\'t import csv
Sample CSV:
file.csv containing:
first, last, age, height, weight, gender, lives
Jake, Cace, 24, 64,165, male, Spain
Jenny, Matte, 21, 58, 110, female, Italy
Solution
def csv():
print(\"CSV Data analysis\")
print()
fname = \"file.csv\" #inputing file name
#Reading the input file into a list with each row as a string
with open(fname) as f:
input_data = f.read().splitlines()
#initialising data
data = []
#iterating through the list containing input data and storing each row as a list of floats.
print (input_data)
for i in range(1, len(input_data)):
row_data = [x for x in input_data[i].split(\',\')]
data.append(row_data)
return data
print(csv()).
Please read the following IEEE Spectrum articles and answer the quest.pdf
Please read the following IEEE Spectrum articles and answer the questions given. You may
want to use illustrations in your answer to the questions, and mark them up accordingly as part of
answering the questions. If you take illustrations from some source (including the IEEE
Spectrum articles) please make sure this is properly cited.
http://spectrum.ieee.org/semiconductors/nanotechnology/the-next-highperformance-transistor-
could-be-made-from-lateral-nanowires Describe a FINFET and how it works. How is it different
than the planar MOSFET described in the first 5 slides of the TFET lecture? Is the FINFET a
quantum device? Give reasons why or why not. How is the nanowire device described here
different than the FINFET? Why is this difference an advantage for the nanowire device? They
one problem with the nanowire device is capacitive coupling. What is this and explain why it is a
problem with the nanowire device?
Solution
1)
The FinFET technology promises to provide the deliver superior levels of scalability needed to
ensure that the current progress with increased levels of integration within integrated circuits can
be maintained.
The FinFET offers many advantages in terms of IC processing that mean that it has been adopted
as a major way forwards for incorporation within IC technology.
FinFET technology has been born as a result of the relentless increase in the levels of
integration. The basic tenet of Moore\'s law has held true for many years from the earliest years
of integrated circuit technology. Essentially it states that the number of transistors on a given
area of silicon doubles every two years.
Some of the landmark chips of the relatively early integrated circuit era had a low transistor
count even though they were advanced for the time. The 6800 microprocessor for example had
just 5000 transistors. Todays have many orders of magnitude more.
basically what is finfet??
FinFET technology takes its name from the fact that the FET structure used looks like a set of
fins when viewed.
The main characteristic of the FinFET is that it has a conducting channel wrapped by a thin
silicon \"fin\" from which it gains its name. The thickness of the fin determines the effective
channel length of the device.
In terms of its structure, it typically has a vertical fin on a substrate which runs between a larger
drain and source area. This protrudes vertically above the substrate as a fin.
The gate orientation is at right angles to the vertical fin. And to traverse from one side of the fin
to the other it wraps over the fin, enabling it to interface with three side of the fin or channel.
This form of gate structure provides improved electrical control over the channel conduction and
it helps reduce leakage current levels and overcomes some other short-channel effects..
The term FinFET is used somewhat generically. Sometimes it is used to describe any fin-based,
multigate transistor architecture regardless of number of gates.
Due to the increased emphas.
Perform a search on the Web for articles and stories about social en.pdf
Perform a search on the Web for articles and stories about social engineering attacks or reverse
social engineering attacks. Find an attack that was successful and describe how it could have
been prevented.
Solution
Answer:
As per Computer Weekly, social engineering attacks were the most well-known hacking strategy
utilized as a part of 2015. What\'s more, there\'s no indication of it backing off; in 2016 60
percent of undertakings were casualties of a social engineering attack or something to that affect.
Furthermore, as per EMC, phishing attacks—the least demanding and most normal sort of social
engineering attacks—brought about almost $6 billion in misfortunes in 2013 alone, spread out
finished around 450,000 separate bargains.
Some hurt more regrettable than others, however all brought about a sufficiently genuine shake
up for security directors to recalibrate their regard for the vector, investigate their conventions,
and make teaching staff a best need.
Here\'s our pick for five of the greatest social engineering attacks ever.
5. 2011 RSA SecurID Phishing Attack
Security firms ought to be the most secure targets with regards to a data framework attack, yet
they are likewise delicious focuses on that draw more than what\'s coming to them of endeavors.
In 2011, one of these attacks bit encryption mammoth RSA and prevailing with regards to mesh
hackers profitable data about the organization\'s SecurID two-factor validation coxcombs.
In spite of the fact that RSA at first denied that the data could enable hackers to trade off
anybody utilizing SecurID, protection temporary worker Lockheed Martin soon recognized
hackers endeavoring to rupture their system utilizing stolen SecurID information. RSA retreated
rapidly and consented to supplant a large portion of the disseminated security tokens.
This inconvenience came down to four workers at RSA parent organization EMC. Attackers sent
them email with a satirize deliver implying to be at a vocation enrollment site, with an Excel
connection titled 2011 Recruitment Plan. It wasn\'t clear why the representatives would think
about a spreadsheet from an outsider site, however they opened it—and a zero-day Flash
adventure covered in the spreadsheet introduced indirect access to their work machines that soon
exposed the keys to the kingdom.
4. 2015 Ubiquiti Networks Scam
Not all hackers are searching for touchy data; here and there they simply need chilly, hard
money.
In 2015, Ubiquiti, a particular producer of wifi hardware and software situated in San Jose,
discovered this out the most difficult way possible when their fund division was focused in an
extortion conspire rotating around worker pantomime.
The organization never uncovered precisely how the attack was organized, yet said that the
bookkeeping office got email indicating to be from the organization\'s Hong Kong auxiliary.
Regularly, such emails contain guidelines with respect to changes in installment account points
of interest or new selle.
Hospital Management Project Simple Scenario We want to develop a.pdf
Hospital Management Project \"Simple Scenario\" We want to develop a comprehensive
software product for XY Hospital, where several doctors are working together. There are several
departments in the hospital, but a central administrationoffice is handling the patient appointment
tasks. Most patients make an appointment before their visit. However, patients can walk in and
can be treated if an appropriate doctor is available. On events, patients may change their visit
schedule by calling. A patient who made an appointment but cannot appear should cancel his/her
appointment in order to avoid a ‘no-show’ penalty. The appointment clerks in the administration
office are handling all the appointments and the scheduling clerks generate ‘daily treatment
schedules’ for doctors based on the appointment. The ‘daily treatment schedules’ include
doctor’s name, patient’s information, nurses and treatment rooms for each treatment. Hence,
doctors are seeing patients according to the daily treatment schedule. Once patients are treated by
the doctors, the accounting office in the hospital is responsible for calculating the medical fee,
mailing bills and receiving the payments. For the patients who do not pay for a certain period of
time, the records of the patients with bad credit are sent to a collection agency. The collection
agency is specialized for collecting the fee and enforcing relevant laws. In addition to the routine
treatments, the hospital also provides emergency care. For an emergency care, patients do not
need to make appointments. Emergency patients are seen by emergency specialized doctors, and
later patients may be handed over to an appropriate doctor for further treatments. Read the
simple scenario carefully for the project, and answer the following questions: Question No. 1
Briefly describe the objective of the project? [1 mark] Question No. 2 Identify all the
stakeholders? [1 mark] Question No. 3 List the main functions that the project provides? [1.5
mark] Question No. 4 Identify the conditions/constrains that the project scenario may has?
Solution
1.This project is related to a hospital management system.it maintains records of all the
operationsthat occur at any of the medical center in public institutions.it maintains two level of
users,administrator level and the user level.the administrator lever encompasses the nurses
andthe doctors while the user level includes the receptionist. The administrators are able to
perfomoperations on more sensitive and confidential documents /modules that contains
differentinformation about students and staff to ensure confidentiality. The modules
includelaboratory,treatment,consultation and medicine stock modules.The user level is able to
manageother modules such as registration and report generation for stock of medicine and staff
reports.To identify the current technology that is used to develop the registry system.To design
and develop a database to contain details of the students,nurses,doctors and s.
Finish the program below that does several bit-wise manipulations of.pdf
Finish the program below that does several bit-wise manipulations of C integers.
Cut and paste the following:
Finish the Program!
You may only use the integer constants given at the beginning. (You may use whatever integers
you wish in string constants as long as they are for printf()\'s. For example the format string
\"0x%08X\" is useful for printing hexadecimal integers.)
You may only use the following integer operators:
+
-
++
--
<<
>>
~
|
&
<
>
=
!=
==
Sample output (32 bit):
Sample output (64 bit):
Solution
mm:
la $a3, array_A # base address for array_A loaded into $a3
la $a1, array_B # base address for array_B loaded into $a1
la $a2, array_C # base address for array_C loaded into $a2
li $t1, four # $t1 = four (row-size and loop end)
li $s0, zero # i = 0; initialize first for loop
loop1:
li $s1, zero # j = 0; restart 2d for loop
loop2:
li $s2, zero # k = 0; restart third for loop
sll $t2, $s0, two # $t2 = i * four (size of row of c)
addu $t2, $t2, $s1 # $t2 = i * size(row) + j
sll $t2, $t2, two # $t2 = computer memory unit offset of [i][j]
addu $t2, $a2, $t2 # $t2 = computer memory unit offset of [i][j]
lw $t4, 0($t2) # $t4 = two bytes of c[i][j]
loop3:
sll $t0, $s2, two # $t0 = k * four (size of row of b)
addu $t0, $t0, $s1 # $t0 = k * size(row) + j
sll $t0, $t0, two # $t0 = computer memory unit offset off [k][j]
addu $t0, $a1, $t0 # $t0 = computer memory unit address of b[k][j]
lw $t5, 0($t0) # $t5 = two bytes of b[k][j]
sll $t0, $s0, two # $t0 = i * four (size of row of a)
addu $t0, $t0, $s2 # $t0 = i * size(row) + k
sll $t0, $t0, two # $t0 = computer memory unit offset of [i][k]
addu $t0, $a3, $t0 # $t0 = computer memory unit address of a[i][k]
lw $t6, 0($t0) # $t6 = two bytes of a[i][k]
mul $t5, $t6, $t5 # $t5 = a[i][k] * b[k][j]
add $t4, $t4, $t5 # $t4 = c[i][j] + a[i][k] * b[k][j]
addiu $s2, $s2, one # $k = k + one
bne $s2, $t1, loop3 #if (k != 4) attend loop3
sw $t4, 0($a2) # c[i][j] = $t4
#----------TEST-------------
li $v0, 1
lw $a0, ($a2)
syscall
li $v0, 4
la $a0, new_row
syscall
#----------TEST-------------
addiu $s1, $s1, one # $j = j + one
addi $a2, $a2, 4
bne $s1, $t1, loop2 # if (j != 4) attend loop2
addiu $s0, $s0, one # $i = i + one
bne $s0, $t1, loop1 # if (i != 32) attend L1
Exit:
li $v0, 10 #exits
syscall
.data
array_A: .word 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1
array_B: .word 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2
array_C: .word 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
output_row_string_C: .asciiz \"Matrix C Output Row \"
colon_string: .asciiz \":
mm:
la $a3, array_A # base address for array_A loaded into $a3
la $a1, array_B # base address for array_B loaded into $a1
la $a2, array_C # base address for array_C loaded into $a2
li $t1, four # $t1 = four (row-size and loop end)
li $s0, zero # i = 0; initialize first for loop
loop1:
li $s1, zero # j = 0; restart 2d for loop
loop2:
li $s2, zero # k = 0; restart third for loop
sll $t2, $s0, two # $t2 = i * four (size of row of c)
addu $t2, .
Explain a) advantage of promoting outcrossing in plants and preventi.pdf
Explain a) advantage of promoting outcrossing in plants and preventing self-fertilization, explain
b) two (2) neat/cool mechanisms you learned on how plants pollinate others. Make sure you
provide enough detail showcasing your understanding of those processes.
Explain a) advantage of dispersing seeds, andexplain b) two (2) neat/cool mechanisms you
learned on how disperse their seeds. Make sure you provide enough detail showcasing your
understanding of those processes.
Solution
Advantages of promoting outcrossing in plants and preventing self-fertilization:
Adding genetic diversity to the species,
It will add resistant to diseases,
It will help in production of hybrid plants and flowers, which keeps the species strong,
It will help in production of large number of viable seeds.
There is a possibility to add new desirable characters,
Yield of crop can be maintained,
It helps in evolution,
Undesirable characters of the plant can be eliminated.
Mechanisms you learned on how plants pollinate others:
1. Imperfect (or unisexual) flowers and monoecy.
The separation of the male sexual part (stamen) and the female part (pistil) into two separate
flowers eliminates intrafloral pollination and favors outcrossing. In monoecy (adj. monoecious),
or monoecism, both imperfect flowers are borne on the same plant.e.g. pumpkin and squash,
melons
2. Imperfect flowers and dioecy.
The natural occurence of individual plants bearing either staminate or pistillate flowers ensures
cross-pollination. This phenomenon is called dioecy (adj. dioecious). e.g. papaya
3. Dichogamy.
Opposite of homogamy, the stamen and the pistil mature at different periods. There are two
main types: protandry and protogyny.
In protandry, the stamens or anthers develop ahead and the pollen grains mature and are shed
before the pistils or the stigma become mature and receptive. Eg: Asteraceae
In protogyny, the pistils or stigma mature ahead of the stamens or anthers. e.g. Suaeda; Simpson
4. Chasmogamy.
Opposite of cleistogamy, pollen is shed, the stigma becomes receptive, and pollination occurs
when the flower opens The opening of the flower exposes the stigma to pollen from other
flowers.
5. Hercogamy (or herkogamy).
This is the spatial separation of the male (stamens) and female (stigma) sexual organs within a
flower. In one type of hercogamy called heterostyly, the heights of stigmas relative to the
stamens vary from flower to flower.
6. Self-sterility or self-incompatibility.
Self-sterility is the inability of a plant to form functional gametes or sexual structures while self-
incompatibility is a condition in which fertilization fails to occur between gametes from the same
individual. In both cases, self-pollination does not form a seed and thus seeds that are formed
necessarily arise from cross-pollination.
ACCORDING TO CHEGG GUIDELINES WE HAVE TO ANSWER ONE QUESTION AT A
TIME. POST THE REST AS SEPERATE QEUSTION, THEN I CAN HELP YOU..
Essay question Camels must cope with hot desert environments where w.pdf
Essay question: Camels must cope with hot desert environments where water is scarce and the
ambient temperature is often higher than the camel\'s core body temperature. Discuss as many
physics-based adaptations as you can think of with which the camel might keep from overheating
while minimizing its water loss. You don\'t need to calculate anything, but be sure to discuss the
relevance of all of the possible heat transfer mechanisms in play, and the physics of each
adaptation. (The adaptations you list don\'t necessarily have to be ones actually used by camels,
but rather ones that a camel might have used.)
Solution
Ectotherms maintain heat production and homeostasis by gaining heat from external
environmental sources whereas endotherms maintain heat homeostasis by gaining heat from
internal organs for instance in camel\'s heat producing source is liver by various enzymatic
reaction due to production of ATP and converted to heat. They obtain physicas based adaptation
by gaining heat from inner organs via heat of convection.
T = M (metabolic heat rate) – [ R + Conductive heat + convective heat (for camle) + E]
Heat Production is the process of gaining heat by metabolic process in camel\'s body
Heat loss or heat transfer in camel to outside environment is under the control of the following
processes – heat of conduction (W/m2) or heat of convection (W/m2). Endothermic animals such
as camels are characterized by warm-blooded nature as they maintain more body temperature
compared to outside environment
Heat of conduction first observed in camel because camel is going to maintain constant 41C
degrees of inner body temperature in desert environment in which heat transfer occurs through
its body tissue followed by hair covering the body. Later, heat transfer normally resisted by the
thickness of skin layers & the flow of heat is varied according to thermal conductivities.
Therefore, the sum of the resistance to heat flow is equal to the total of conduction & resistance
effects. Later, a “conduction heat transfer coefficient can be denoted & it is followed by transfer
heat into the air where convection and radiation contribute to this step..
Describe the excel equation that you can use to measure the volumes l.pdf
Describe the excel equation that you can use to measure the volumes listed in the table below.
For example to measure the median value of the cells between C1 and D4 is given by
\"=median(Cl:D4)\". If you use a specific range of cells explain how you chose them. If you are
inexperience with excel, you may want to learn about the MIN, MAX, AVERAGE, and STDEV
excel functions. Make a well formatted table that lists the volumes you measured (do not
calculate these values)
Solution
To select a specific range of cells in excel:
Click the first cell in the range, and then drag to the last cell, or hold down SHIFT while you
press the arrow keys to extend the selection.
You can also select the firstcell in the range, and then press F8 to extend the selection by using
the arrow keys. To stop extending the selection, press F8 again.
For specific table selection:
Take an example of file content:
If I wanted to sum the items in row 1, columns 2-4 (i.e. 11 + 12 + 13)
If I were doing it by hand, I\'d type:=SUM(B1:D1)
Excel equation to get the volume value for the given table:
= product(A1:C1) & = product(A2:C2).
Denise and Christy have the same preferences and incomes.pdf
Denise and Christy have the same preferences and incomes. Just as Denise arrived at the theater
to see a play, she discovered that she had lost the $20 ticket she had purchased
earlier. Christyalso just arrived at the theater planning to buy a ticket to see the same play when
she discovered that she had lost a $20 bill from her wallet. If both Denise and Christy are rational
and both have enough money to pay for a ticket, is one of them more likely than the other to go
ahead and see the play anyway? Briefly explain.
Denise and Christy have the same preferences and incomes. Just as Denise arrived at the theater
to see a play, she discovered that she had lost the $20 ticket she had purchased
earlier. Christyalso just arrived at the theater planning to buy a ticket to see the same play when
she discovered that she had lost a $20 bill from her wallet. If both Denise and Christy are rational
and both have enough money to pay for a ticket, is one of them more likely than the other to go
ahead and see the play anyway? Briefly explain.
Denise and Christy have the same preferences and incomes. Just as Denise arrived at the theater
to see a play, she discovered that she had lost the $20 ticket she had purchased
earlier. Christyalso just arrived at the theater planning to buy a ticket to see the same play when
she discovered that she had lost a $20 bill from her wallet. If both Denise and Christy are rational
and both have enough money to pay for a ticket, is one of them more likely than the other to go
ahead and see the play anyway? Briefly explain.
Denise and Christy have the same preferences and incomes. Just as Denise arrived at the theater
to see a play, she discovered that she had lost the $20 ticket she had purchased
earlier. Christyalso just arrived at the theater planning to buy a ticket to see the same play when
she discovered that she had lost a $20 bill from her wallet. If both Denise and Christy are rational
and both have enough money to pay for a ticket, is one of them more likely than the other to go
ahead and see the play anyway? Briefly explain.
Denise and Christy have the same preferences and incomes. Just as Denise arrived at the theater
to see a play, she discovered that she had lost the $20 ticket she had purchased
earlier. Christyalso just arrived at the theater planning to buy a ticket to see the same play when
she discovered that she had lost a $20 bill from her wallet. If both Denise and Christy are rational
and both have enough money to pay for a ticket, is one of them more likely than the other to go
ahead and see the play anyway? Briefly explain.
Solution
In my opinion, Denise is more likely to go ahead and see the play.
Denise had already purchased the ticket before she arrived, which reveals she was committed to
seeing the play at said date and time. But Christy came to buy the ticket on-spot, which involved
a certain level of uncertainty (on availability of on-spot ticket. If ticket wasn\'t available, she
wouldn\'t be able.
Can you create a simple polymorphic program using C++Solution.pdf
Can you create a simple polymorphic program using C++?
Solution
Yes we can create a simpole polymorphic programm using c++
1.Polymorphism:it means that capability to allocate constrantive items to approach with frequent
interface.(or) implementing the similar code which acts in discretely in discrete conditions.
2.particularly this polymorphism is to permit the objecs like variables and functions .
it mentions to utilize the overloading methods and more over this polymorphism associates with
the objects.
Ex;consider a \'+\' operator in c++
1. 8+5 ......integer addition
2.8.23+9.0 ....floating point addition.
1) What are the benefits of DOAS2) What is reheat Why is it requ.pdf
1) What are the benefits of DOAS?
2) What is reheat? Why is it required even with VAV sometimes?
3) What is a waterside economizer?
Solution
Qus 1.Answer
The concept of DOAS was introduced in our industry over the past several decades. DOAS is
capable of delivering the 100% required outdoor air (OA) to each occupied space independently
or in conjunction with local terminal HVAC units. The system is the first recognized system that
takes credit for decoupling humidity control and temperature control, which introduced the
industry to the potential solution that fulfills ASHRAE Standard 62.1 ventilation requirements.
Decoupling the humidity control and temperature control (or decoupling sensible and latent load
handling) becomes the major benefits of utilizing DOAS in the early 90s. Operating this kind of
primary and secondary system combination with other advanced technologies of that time
offered a cost saving advantage and better humidity control when compared to traditional HVAC
systems. (Meckler 1986) The primary system delivers primary air at a low temperature (for
example at 42° F). Thus, a small quantity of primary air capable of offsetting the building
humidity load and fulfilling the ventilation requirement. Under particular building type or
climates, the partial sensible cooling load can rely on the primary system in summer or under
part-load conditions. The remaining sensible cooling is provided by terminal unit(s) using local
recirculation air to maintain the space temperature level.
From decoupling the humidity control and temperature control, the most obvious benefit is the
ability to downsize the system. Since the primary system is responsible for humidity control and
delivering required ventilation air, the low supply air temperature causes a lower total
requirement quantity than the system configuration can with a single system handling the
required sensible and latent loads. Downsizing the primary system duct and fan size offer a cost
savings advantage because the secondary system is only responsible of sensible cooling
eliminating the need for humidity control from the secondary system.
Benefits of DOAS:
Based on current literature review, the benefits of DOAS compared to a conventional VAV
system are:
1 Ventilation
In order to realize the ventilation benefit of DOAS, the OA must be supplied to each occupied
space either directly or in conjunction with local HVAC units. One of the difficulties of
achieving good ventilation performance with central HVAC systems (e.g. VAV systems) serving
multiple zones is that the individual zone sensible loads do not necessary vary with their
ventilation requirement. This causes increased system total ventilation intake airflows - which
are often required to ensure the proper ventilation for each zone at all operation conditions - in
compliance with ASHRAE Standard.
Another difficulty is over-ventilation of non-critical zones. In a multiple-zoned recirculating
ventilation system, a single air.
Beadline 20t6 October In 1. Briefly describe the homogenco.pdf
Beadline: 20t6 October\' In 1. Briefly describe the homogencous reaction and heterogeneous
reaction, and give examples for each phenomena. (30%)
Solution
Homogeneous reaction: Chemical reactions that occur in a single phase (gaseous, liquid, or
solid) is called homogeneous reaction. The most important of homogeneous reactions are the
reactions between gases (e.g., the combination of common gases and oxygen to produce a flame)
and the reactions between liquids or substances dissolved in liquids (e.g., the reactions between
aqueous solutions of acids and bases).
Heterogeneous reaction: Chemical reactions in which the reactants are components of two or
more phases (solid and gas, solid and liquid, two immiscible liquids) or in which one or more
reactants undergo chemical change at an interface, e.g., on the surface of a solid catalyst. The
reaction of metals with acids, the electrochemical changes that occur in batteries and electrolytic
cells, and the phenomena of corrosion are part of the subject of heterogeneous reactions..
A patient has breast cancer which has metastasized to their lungs. T.pdf
A patient has breast cancer which has metastasized to their lungs. This is a very common route of
metastasis, in which cancer cells are drawn into lymphatic capillaries with lymph, move through
the lymphatic system, then gain access to general circulation as the lymphatic ducts empty into
venous circulation. Often, the cancer cells then “seed” the first hospitable organ they encounter
(often the lungs, for non-GI cancers).
Trace the route that cancerous cells took from the left breast, through the lymphatic vessels, and
then through circulation, to the point where they invaded the lung tissue.
Solution
Cancer cells break away from the left breast and attach themselves to the outside wall of any
lymphatic capillary. Then, they accomplish themselves in the vessel wall to flow with the lymph
carried away for infiltration to reach the lymph nodes. There they start multiplying and blocking
the pleural sac (surrounds the lung) which in turn gets filled with fluid or forms a tumor and then
slowly these cells invade the lung tissue..
LAND USE LAND COVER AND NDVI OF MIRZAPUR DISTRICT, UP
This Dissertation explores the particular circumstances of Mirzapur, a region located in the
core of India. Mirzapur, with its varied terrains and abundant biodiversity, offers an optimal
environment for investigating the changes in vegetation cover dynamics. Our study utilizes
advanced technologies such as GIS (Geographic Information Systems) and Remote sensing to
analyze the transformations that have taken place over the course of a decade.
The complex relationship between human activities and the environment has been the focus
of extensive research and worry. As the global community grapples with swift urbanization,
population expansion, and economic progress, the effects on natural ecosystems are becoming
more evident. A crucial element of this impact is the alteration of vegetation cover, which plays a
significant role in maintaining the ecological equilibrium of our planet.Land serves as the foundation for all human activities and provides the necessary materials for
these activities. As the most crucial natural resource, its utilization by humans results in different
'Land uses,' which are determined by both human activities and the physical characteristics of the
land.
The utilization of land is impacted by human needs and environmental factors. In countries
like India, rapid population growth and the emphasis on extensive resource exploitation can lead
to significant land degradation, adversely affecting the region's land cover.
Therefore, human intervention has significantly influenced land use patterns over many
centuries, evolving its structure over time and space. In the present era, these changes have
accelerated due to factors such as agriculture and urbanization. Information regarding land use and
cover is essential for various planning and management tasks related to the Earth's surface,
providing crucial environmental data for scientific, resource management, policy purposes, and
diverse human activities.
Accurate understanding of land use and cover is imperative for the development planning
of any area. Consequently, a wide range of professionals, including earth system scientists, land
and water managers, and urban planners, are interested in obtaining data on land use and cover
changes, conversion trends, and other related patterns. The spatial dimensions of land use and
cover support policymakers and scientists in making well-informed decisions, as alterations in
these patterns indicate shifts in economic and social conditions. Monitoring such changes with the
help of Advanced technologies like Remote Sensing and Geographic Information Systems is
crucial for coordinated efforts across different administrative levels. Advanced technologies like
Remote Sensing and Geographic Information Systems
9
Changes in vegetation cover refer to variations in the distribution, composition, and overall
structure of plant communities across different temporal and spatial scales. These changes can
occur natural.
Community pharmacy- Social and preventive pharmacy UNIT 5
Covered community pharmacy topic of the subject Social and preventive pharmacy for Diploma and Bachelor of pharmacy
বাংলাদেশ অর্থনৈতিক সমীক্ষা (Economic Review) ২০২৪ UJS App.pdf
বাংলাদেশের অর্থনৈতিক সমীক্ষা ২০২৪ [Bangladesh Economic Review 2024 Bangla.pdf] কম্পিউটার , ট্যাব ও স্মার্ট ফোন ভার্সন সহ সম্পূর্ণ বাংলা ই-বুক বা pdf বই " সুচিপত্র ...বুকমার্ক মেনু 🔖 ও হাইপার লিংক মেনু 📝👆 যুক্ত ..
আমাদের সবার জন্য খুব খুব গুরুত্বপূর্ণ একটি বই ..বিসিএস, ব্যাংক, ইউনিভার্সিটি ভর্তি ও যে কোন প্রতিযোগিতা মূলক পরীক্ষার জন্য এর খুব ইম্পরট্যান্ট একটি বিষয় ...তাছাড়া বাংলাদেশের সাম্প্রতিক যে কোন ডাটা বা তথ্য এই বইতে পাবেন ...
তাই একজন নাগরিক হিসাবে এই তথ্য গুলো আপনার জানা প্রয়োজন ...।
বিসিএস ও ব্যাংক এর লিখিত পরীক্ষা ...+এছাড়া মাধ্যমিক ও উচ্চমাধ্যমিকের স্টুডেন্টদের জন্য অনেক কাজে আসবে ...
More Related Content
More from fasttrackcomputersol
Step by step procedures how layout is created and used for transistor.pdf
Step by step procedures how layout is created and used for transistor fabrication?
Solution
CMOS transistors are fabricated on silicon wafer Lithography process similar to printing press
On each step, different materials are deposited or etched Easiest to understand by viewing both
top and cross-section of wafer in a simplified manufacturing process.
Show all work. I need to know exactly how you got what you got so I .pdf
Show all work. I need to know exactly how you got what you got so I can do the others on my
own.
A host computer with an IP address of 10.10.20.5 using a subnet mask of 255.255.192.0 pings a
computer with an IP address of 10.10.10.5. What happens to the data packet?
a. The data packet is sent to the gateway.
b. The data packet is sent to 10.10.20.192.
c. The 10.10.10.5 is not in the same LAN; therefore, the data packet is sent out as a broadcast.
d. The data packet is sent to the 127.0.0.1 network.
e. None of the above
Solution
C. Data packet is sent out as a broadcast as you can see the IP 10.10.10.5 is in different network.
Here the network is 10.10.x.x.
Identify the three main threats to biodiversity and explain how each.pdf
Identify the three main threats to biodiversity and explain how each damages diversity?
Solution
Answer) Three main threats to biodiversity are listed in details below;
a) Deforestation and habitat loss - deforestation refers to permanently destructing the forests to
make the land of forest be available for other uses. deforestation is performed by large scale
burning of forests which makes a large part of unnecessary carbon emission to the environment.
deforestation cause the loss in plant diversity (earlier available in those forests) as well as loss in
fauna lived in those forests.
b) Climate change - change in climatic conditions is a natural process which occurs at a very
slow rate. but climate change due to human activities a rapid process which affect the
environment in long terms. rapid climate change does not provide sufficient time for adaptation
and a large part of biodiversity is lost. particularly, aquatic ecosystem is primarily affected by
climate change. such climate change conditions are rising oceanic temperature, high carbon
emission in environment, global warming etc.
c) Overexploitation - To fulfil the requirements of rapid growing world population, often natural
resources are exploited blindfold and over exploiting these resources result in loss of biodiversity
such as over-harvesting lead that variety vulnerable to loss in its genetic diversity, overfishing
makes that fish species vulnerable to extinction. there are other ways of overexploitation such as
killing, hunting, poaching which result in losing diversity of fauna being exploited..
Q6. Proteins are used for structural integrity inside and outside of.pdf
Q6. Proteins are used for structural integrity inside and outside of animal cells, but carbohydrates
are not.
a. TRUE
b. FALSE
Q7. A deficit in oxygen supply would cause levels of NAD+ to…
a. become elevated
b. remain unchanged
c. become reduced
Solution
Q6.
a. TRUE
Carbohydrates are mostly energy source for cells,
Q7. A deficit in oxygen supply would cause levels of NAD+ to…
c. become reduced
Under anaerobic conditions NADH accumulates since there is no oxygen to oxidize NAD+..
Python question...Complete without importing any modules. Ie. Don.pdf
Python question...
Complete without importing any modules. Ie. Don\'t import csv
Sample CSV:
file.csv containing:
first, last, age, height, weight, gender, lives
Jake, Cace, 24, 64,165, male, Spain
Jenny, Matte, 21, 58, 110, female, Italy
Solution
def csv():
print(\"CSV Data analysis\")
print()
fname = \"file.csv\" #inputing file name
#Reading the input file into a list with each row as a string
with open(fname) as f:
input_data = f.read().splitlines()
#initialising data
data = []
#iterating through the list containing input data and storing each row as a list of floats.
print (input_data)
for i in range(1, len(input_data)):
row_data = [x for x in input_data[i].split(\',\')]
data.append(row_data)
return data
print(csv()).
Please read the following IEEE Spectrum articles and answer the quest.pdf
Please read the following IEEE Spectrum articles and answer the questions given. You may
want to use illustrations in your answer to the questions, and mark them up accordingly as part of
answering the questions. If you take illustrations from some source (including the IEEE
Spectrum articles) please make sure this is properly cited.
http://spectrum.ieee.org/semiconductors/nanotechnology/the-next-highperformance-transistor-
could-be-made-from-lateral-nanowires Describe a FINFET and how it works. How is it different
than the planar MOSFET described in the first 5 slides of the TFET lecture? Is the FINFET a
quantum device? Give reasons why or why not. How is the nanowire device described here
different than the FINFET? Why is this difference an advantage for the nanowire device? They
one problem with the nanowire device is capacitive coupling. What is this and explain why it is a
problem with the nanowire device?
Solution
1)
The FinFET technology promises to provide the deliver superior levels of scalability needed to
ensure that the current progress with increased levels of integration within integrated circuits can
be maintained.
The FinFET offers many advantages in terms of IC processing that mean that it has been adopted
as a major way forwards for incorporation within IC technology.
FinFET technology has been born as a result of the relentless increase in the levels of
integration. The basic tenet of Moore\'s law has held true for many years from the earliest years
of integrated circuit technology. Essentially it states that the number of transistors on a given
area of silicon doubles every two years.
Some of the landmark chips of the relatively early integrated circuit era had a low transistor
count even though they were advanced for the time. The 6800 microprocessor for example had
just 5000 transistors. Todays have many orders of magnitude more.
basically what is finfet??
FinFET technology takes its name from the fact that the FET structure used looks like a set of
fins when viewed.
The main characteristic of the FinFET is that it has a conducting channel wrapped by a thin
silicon \"fin\" from which it gains its name. The thickness of the fin determines the effective
channel length of the device.
In terms of its structure, it typically has a vertical fin on a substrate which runs between a larger
drain and source area. This protrudes vertically above the substrate as a fin.
The gate orientation is at right angles to the vertical fin. And to traverse from one side of the fin
to the other it wraps over the fin, enabling it to interface with three side of the fin or channel.
This form of gate structure provides improved electrical control over the channel conduction and
it helps reduce leakage current levels and overcomes some other short-channel effects..
The term FinFET is used somewhat generically. Sometimes it is used to describe any fin-based,
multigate transistor architecture regardless of number of gates.
Due to the increased emphas.
Perform a search on the Web for articles and stories about social en.pdf
Perform a search on the Web for articles and stories about social engineering attacks or reverse
social engineering attacks. Find an attack that was successful and describe how it could have
been prevented.
Solution
Answer:
As per Computer Weekly, social engineering attacks were the most well-known hacking strategy
utilized as a part of 2015. What\'s more, there\'s no indication of it backing off; in 2016 60
percent of undertakings were casualties of a social engineering attack or something to that affect.
Furthermore, as per EMC, phishing attacks—the least demanding and most normal sort of social
engineering attacks—brought about almost $6 billion in misfortunes in 2013 alone, spread out
finished around 450,000 separate bargains.
Some hurt more regrettable than others, however all brought about a sufficiently genuine shake
up for security directors to recalibrate their regard for the vector, investigate their conventions,
and make teaching staff a best need.
Here\'s our pick for five of the greatest social engineering attacks ever.
5. 2011 RSA SecurID Phishing Attack
Security firms ought to be the most secure targets with regards to a data framework attack, yet
they are likewise delicious focuses on that draw more than what\'s coming to them of endeavors.
In 2011, one of these attacks bit encryption mammoth RSA and prevailing with regards to mesh
hackers profitable data about the organization\'s SecurID two-factor validation coxcombs.
In spite of the fact that RSA at first denied that the data could enable hackers to trade off
anybody utilizing SecurID, protection temporary worker Lockheed Martin soon recognized
hackers endeavoring to rupture their system utilizing stolen SecurID information. RSA retreated
rapidly and consented to supplant a large portion of the disseminated security tokens.
This inconvenience came down to four workers at RSA parent organization EMC. Attackers sent
them email with a satirize deliver implying to be at a vocation enrollment site, with an Excel
connection titled 2011 Recruitment Plan. It wasn\'t clear why the representatives would think
about a spreadsheet from an outsider site, however they opened it—and a zero-day Flash
adventure covered in the spreadsheet introduced indirect access to their work machines that soon
exposed the keys to the kingdom.
4. 2015 Ubiquiti Networks Scam
Not all hackers are searching for touchy data; here and there they simply need chilly, hard
money.
In 2015, Ubiquiti, a particular producer of wifi hardware and software situated in San Jose,
discovered this out the most difficult way possible when their fund division was focused in an
extortion conspire rotating around worker pantomime.
The organization never uncovered precisely how the attack was organized, yet said that the
bookkeeping office got email indicating to be from the organization\'s Hong Kong auxiliary.
Regularly, such emails contain guidelines with respect to changes in installment account points
of interest or new selle.
Hospital Management Project Simple Scenario We want to develop a.pdf
Hospital Management Project \"Simple Scenario\" We want to develop a comprehensive
software product for XY Hospital, where several doctors are working together. There are several
departments in the hospital, but a central administrationoffice is handling the patient appointment
tasks. Most patients make an appointment before their visit. However, patients can walk in and
can be treated if an appropriate doctor is available. On events, patients may change their visit
schedule by calling. A patient who made an appointment but cannot appear should cancel his/her
appointment in order to avoid a ‘no-show’ penalty. The appointment clerks in the administration
office are handling all the appointments and the scheduling clerks generate ‘daily treatment
schedules’ for doctors based on the appointment. The ‘daily treatment schedules’ include
doctor’s name, patient’s information, nurses and treatment rooms for each treatment. Hence,
doctors are seeing patients according to the daily treatment schedule. Once patients are treated by
the doctors, the accounting office in the hospital is responsible for calculating the medical fee,
mailing bills and receiving the payments. For the patients who do not pay for a certain period of
time, the records of the patients with bad credit are sent to a collection agency. The collection
agency is specialized for collecting the fee and enforcing relevant laws. In addition to the routine
treatments, the hospital also provides emergency care. For an emergency care, patients do not
need to make appointments. Emergency patients are seen by emergency specialized doctors, and
later patients may be handed over to an appropriate doctor for further treatments. Read the
simple scenario carefully for the project, and answer the following questions: Question No. 1
Briefly describe the objective of the project? [1 mark] Question No. 2 Identify all the
stakeholders? [1 mark] Question No. 3 List the main functions that the project provides? [1.5
mark] Question No. 4 Identify the conditions/constrains that the project scenario may has?
Solution
1.This project is related to a hospital management system.it maintains records of all the
operationsthat occur at any of the medical center in public institutions.it maintains two level of
users,administrator level and the user level.the administrator lever encompasses the nurses
andthe doctors while the user level includes the receptionist. The administrators are able to
perfomoperations on more sensitive and confidential documents /modules that contains
differentinformation about students and staff to ensure confidentiality. The modules
includelaboratory,treatment,consultation and medicine stock modules.The user level is able to
manageother modules such as registration and report generation for stock of medicine and staff
reports.To identify the current technology that is used to develop the registry system.To design
and develop a database to contain details of the students,nurses,doctors and s.
Finish the program below that does several bit-wise manipulations of.pdf
Finish the program below that does several bit-wise manipulations of C integers.
Cut and paste the following:
Finish the Program!
You may only use the integer constants given at the beginning. (You may use whatever integers
you wish in string constants as long as they are for printf()\'s. For example the format string
\"0x%08X\" is useful for printing hexadecimal integers.)
You may only use the following integer operators:
+
-
++
--
<<
>>
~
|
&
<
>
=
!=
==
Sample output (32 bit):
Sample output (64 bit):
Solution
mm:
la $a3, array_A # base address for array_A loaded into $a3
la $a1, array_B # base address for array_B loaded into $a1
la $a2, array_C # base address for array_C loaded into $a2
li $t1, four # $t1 = four (row-size and loop end)
li $s0, zero # i = 0; initialize first for loop
loop1:
li $s1, zero # j = 0; restart 2d for loop
loop2:
li $s2, zero # k = 0; restart third for loop
sll $t2, $s0, two # $t2 = i * four (size of row of c)
addu $t2, $t2, $s1 # $t2 = i * size(row) + j
sll $t2, $t2, two # $t2 = computer memory unit offset of [i][j]
addu $t2, $a2, $t2 # $t2 = computer memory unit offset of [i][j]
lw $t4, 0($t2) # $t4 = two bytes of c[i][j]
loop3:
sll $t0, $s2, two # $t0 = k * four (size of row of b)
addu $t0, $t0, $s1 # $t0 = k * size(row) + j
sll $t0, $t0, two # $t0 = computer memory unit offset off [k][j]
addu $t0, $a1, $t0 # $t0 = computer memory unit address of b[k][j]
lw $t5, 0($t0) # $t5 = two bytes of b[k][j]
sll $t0, $s0, two # $t0 = i * four (size of row of a)
addu $t0, $t0, $s2 # $t0 = i * size(row) + k
sll $t0, $t0, two # $t0 = computer memory unit offset of [i][k]
addu $t0, $a3, $t0 # $t0 = computer memory unit address of a[i][k]
lw $t6, 0($t0) # $t6 = two bytes of a[i][k]
mul $t5, $t6, $t5 # $t5 = a[i][k] * b[k][j]
add $t4, $t4, $t5 # $t4 = c[i][j] + a[i][k] * b[k][j]
addiu $s2, $s2, one # $k = k + one
bne $s2, $t1, loop3 #if (k != 4) attend loop3
sw $t4, 0($a2) # c[i][j] = $t4
#----------TEST-------------
li $v0, 1
lw $a0, ($a2)
syscall
li $v0, 4
la $a0, new_row
syscall
#----------TEST-------------
addiu $s1, $s1, one # $j = j + one
addi $a2, $a2, 4
bne $s1, $t1, loop2 # if (j != 4) attend loop2
addiu $s0, $s0, one # $i = i + one
bne $s0, $t1, loop1 # if (i != 32) attend L1
Exit:
li $v0, 10 #exits
syscall
.data
array_A: .word 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1
array_B: .word 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2
array_C: .word 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
output_row_string_C: .asciiz \"Matrix C Output Row \"
colon_string: .asciiz \":
mm:
la $a3, array_A # base address for array_A loaded into $a3
la $a1, array_B # base address for array_B loaded into $a1
la $a2, array_C # base address for array_C loaded into $a2
li $t1, four # $t1 = four (row-size and loop end)
li $s0, zero # i = 0; initialize first for loop
loop1:
li $s1, zero # j = 0; restart 2d for loop
loop2:
li $s2, zero # k = 0; restart third for loop
sll $t2, $s0, two # $t2 = i * four (size of row of c)
addu $t2, .
Explain a) advantage of promoting outcrossing in plants and preventi.pdf
Explain a) advantage of promoting outcrossing in plants and preventing self-fertilization, explain
b) two (2) neat/cool mechanisms you learned on how plants pollinate others. Make sure you
provide enough detail showcasing your understanding of those processes.
Explain a) advantage of dispersing seeds, andexplain b) two (2) neat/cool mechanisms you
learned on how disperse their seeds. Make sure you provide enough detail showcasing your
understanding of those processes.
Solution
Advantages of promoting outcrossing in plants and preventing self-fertilization:
Adding genetic diversity to the species,
It will add resistant to diseases,
It will help in production of hybrid plants and flowers, which keeps the species strong,
It will help in production of large number of viable seeds.
There is a possibility to add new desirable characters,
Yield of crop can be maintained,
It helps in evolution,
Undesirable characters of the plant can be eliminated.
Mechanisms you learned on how plants pollinate others:
1. Imperfect (or unisexual) flowers and monoecy.
The separation of the male sexual part (stamen) and the female part (pistil) into two separate
flowers eliminates intrafloral pollination and favors outcrossing. In monoecy (adj. monoecious),
or monoecism, both imperfect flowers are borne on the same plant.e.g. pumpkin and squash,
melons
2. Imperfect flowers and dioecy.
The natural occurence of individual plants bearing either staminate or pistillate flowers ensures
cross-pollination. This phenomenon is called dioecy (adj. dioecious). e.g. papaya
3. Dichogamy.
Opposite of homogamy, the stamen and the pistil mature at different periods. There are two
main types: protandry and protogyny.
In protandry, the stamens or anthers develop ahead and the pollen grains mature and are shed
before the pistils or the stigma become mature and receptive. Eg: Asteraceae
In protogyny, the pistils or stigma mature ahead of the stamens or anthers. e.g. Suaeda; Simpson
4. Chasmogamy.
Opposite of cleistogamy, pollen is shed, the stigma becomes receptive, and pollination occurs
when the flower opens The opening of the flower exposes the stigma to pollen from other
flowers.
5. Hercogamy (or herkogamy).
This is the spatial separation of the male (stamens) and female (stigma) sexual organs within a
flower. In one type of hercogamy called heterostyly, the heights of stigmas relative to the
stamens vary from flower to flower.
6. Self-sterility or self-incompatibility.
Self-sterility is the inability of a plant to form functional gametes or sexual structures while self-
incompatibility is a condition in which fertilization fails to occur between gametes from the same
individual. In both cases, self-pollination does not form a seed and thus seeds that are formed
necessarily arise from cross-pollination.
ACCORDING TO CHEGG GUIDELINES WE HAVE TO ANSWER ONE QUESTION AT A
TIME. POST THE REST AS SEPERATE QEUSTION, THEN I CAN HELP YOU..
Essay question Camels must cope with hot desert environments where w.pdf
Essay question: Camels must cope with hot desert environments where water is scarce and the
ambient temperature is often higher than the camel\'s core body temperature. Discuss as many
physics-based adaptations as you can think of with which the camel might keep from overheating
while minimizing its water loss. You don\'t need to calculate anything, but be sure to discuss the
relevance of all of the possible heat transfer mechanisms in play, and the physics of each
adaptation. (The adaptations you list don\'t necessarily have to be ones actually used by camels,
but rather ones that a camel might have used.)
Solution
Ectotherms maintain heat production and homeostasis by gaining heat from external
environmental sources whereas endotherms maintain heat homeostasis by gaining heat from
internal organs for instance in camel\'s heat producing source is liver by various enzymatic
reaction due to production of ATP and converted to heat. They obtain physicas based adaptation
by gaining heat from inner organs via heat of convection.
T = M (metabolic heat rate) – [ R + Conductive heat + convective heat (for camle) + E]
Heat Production is the process of gaining heat by metabolic process in camel\'s body
Heat loss or heat transfer in camel to outside environment is under the control of the following
processes – heat of conduction (W/m2) or heat of convection (W/m2). Endothermic animals such
as camels are characterized by warm-blooded nature as they maintain more body temperature
compared to outside environment
Heat of conduction first observed in camel because camel is going to maintain constant 41C
degrees of inner body temperature in desert environment in which heat transfer occurs through
its body tissue followed by hair covering the body. Later, heat transfer normally resisted by the
thickness of skin layers & the flow of heat is varied according to thermal conductivities.
Therefore, the sum of the resistance to heat flow is equal to the total of conduction & resistance
effects. Later, a “conduction heat transfer coefficient can be denoted & it is followed by transfer
heat into the air where convection and radiation contribute to this step..
Describe the excel equation that you can use to measure the volumes l.pdf
Describe the excel equation that you can use to measure the volumes listed in the table below.
For example to measure the median value of the cells between C1 and D4 is given by
\"=median(Cl:D4)\". If you use a specific range of cells explain how you chose them. If you are
inexperience with excel, you may want to learn about the MIN, MAX, AVERAGE, and STDEV
excel functions. Make a well formatted table that lists the volumes you measured (do not
calculate these values)
Solution
To select a specific range of cells in excel:
Click the first cell in the range, and then drag to the last cell, or hold down SHIFT while you
press the arrow keys to extend the selection.
You can also select the firstcell in the range, and then press F8 to extend the selection by using
the arrow keys. To stop extending the selection, press F8 again.
For specific table selection:
Take an example of file content:
If I wanted to sum the items in row 1, columns 2-4 (i.e. 11 + 12 + 13)
If I were doing it by hand, I\'d type:=SUM(B1:D1)
Excel equation to get the volume value for the given table:
= product(A1:C1) & = product(A2:C2).
Denise and Christy have the same preferences and incomes.pdf
Denise and Christy have the same preferences and incomes. Just as Denise arrived at the theater
to see a play, she discovered that she had lost the $20 ticket she had purchased
earlier. Christyalso just arrived at the theater planning to buy a ticket to see the same play when
she discovered that she had lost a $20 bill from her wallet. If both Denise and Christy are rational
and both have enough money to pay for a ticket, is one of them more likely than the other to go
ahead and see the play anyway? Briefly explain.
Denise and Christy have the same preferences and incomes. Just as Denise arrived at the theater
to see a play, she discovered that she had lost the $20 ticket she had purchased
earlier. Christyalso just arrived at the theater planning to buy a ticket to see the same play when
she discovered that she had lost a $20 bill from her wallet. If both Denise and Christy are rational
and both have enough money to pay for a ticket, is one of them more likely than the other to go
ahead and see the play anyway? Briefly explain.
Denise and Christy have the same preferences and incomes. Just as Denise arrived at the theater
to see a play, she discovered that she had lost the $20 ticket she had purchased
earlier. Christyalso just arrived at the theater planning to buy a ticket to see the same play when
she discovered that she had lost a $20 bill from her wallet. If both Denise and Christy are rational
and both have enough money to pay for a ticket, is one of them more likely than the other to go
ahead and see the play anyway? Briefly explain.
Denise and Christy have the same preferences and incomes. Just as Denise arrived at the theater
to see a play, she discovered that she had lost the $20 ticket she had purchased
earlier. Christyalso just arrived at the theater planning to buy a ticket to see the same play when
she discovered that she had lost a $20 bill from her wallet. If both Denise and Christy are rational
and both have enough money to pay for a ticket, is one of them more likely than the other to go
ahead and see the play anyway? Briefly explain.
Denise and Christy have the same preferences and incomes. Just as Denise arrived at the theater
to see a play, she discovered that she had lost the $20 ticket she had purchased
earlier. Christyalso just arrived at the theater planning to buy a ticket to see the same play when
she discovered that she had lost a $20 bill from her wallet. If both Denise and Christy are rational
and both have enough money to pay for a ticket, is one of them more likely than the other to go
ahead and see the play anyway? Briefly explain.
Solution
In my opinion, Denise is more likely to go ahead and see the play.
Denise had already purchased the ticket before she arrived, which reveals she was committed to
seeing the play at said date and time. But Christy came to buy the ticket on-spot, which involved
a certain level of uncertainty (on availability of on-spot ticket. If ticket wasn\'t available, she
wouldn\'t be able.
Can you create a simple polymorphic program using C++Solution.pdf
Can you create a simple polymorphic program using C++?
Solution
Yes we can create a simpole polymorphic programm using c++
1.Polymorphism:it means that capability to allocate constrantive items to approach with frequent
interface.(or) implementing the similar code which acts in discretely in discrete conditions.
2.particularly this polymorphism is to permit the objecs like variables and functions .
it mentions to utilize the overloading methods and more over this polymorphism associates with
the objects.
Ex;consider a \'+\' operator in c++
1. 8+5 ......integer addition
2.8.23+9.0 ....floating point addition.
1) What are the benefits of DOAS2) What is reheat Why is it requ.pdf
1) What are the benefits of DOAS?
2) What is reheat? Why is it required even with VAV sometimes?
3) What is a waterside economizer?
Solution
Qus 1.Answer
The concept of DOAS was introduced in our industry over the past several decades. DOAS is
capable of delivering the 100% required outdoor air (OA) to each occupied space independently
or in conjunction with local terminal HVAC units. The system is the first recognized system that
takes credit for decoupling humidity control and temperature control, which introduced the
industry to the potential solution that fulfills ASHRAE Standard 62.1 ventilation requirements.
Decoupling the humidity control and temperature control (or decoupling sensible and latent load
handling) becomes the major benefits of utilizing DOAS in the early 90s. Operating this kind of
primary and secondary system combination with other advanced technologies of that time
offered a cost saving advantage and better humidity control when compared to traditional HVAC
systems. (Meckler 1986) The primary system delivers primary air at a low temperature (for
example at 42° F). Thus, a small quantity of primary air capable of offsetting the building
humidity load and fulfilling the ventilation requirement. Under particular building type or
climates, the partial sensible cooling load can rely on the primary system in summer or under
part-load conditions. The remaining sensible cooling is provided by terminal unit(s) using local
recirculation air to maintain the space temperature level.
From decoupling the humidity control and temperature control, the most obvious benefit is the
ability to downsize the system. Since the primary system is responsible for humidity control and
delivering required ventilation air, the low supply air temperature causes a lower total
requirement quantity than the system configuration can with a single system handling the
required sensible and latent loads. Downsizing the primary system duct and fan size offer a cost
savings advantage because the secondary system is only responsible of sensible cooling
eliminating the need for humidity control from the secondary system.
Benefits of DOAS:
Based on current literature review, the benefits of DOAS compared to a conventional VAV
system are:
1 Ventilation
In order to realize the ventilation benefit of DOAS, the OA must be supplied to each occupied
space either directly or in conjunction with local HVAC units. One of the difficulties of
achieving good ventilation performance with central HVAC systems (e.g. VAV systems) serving
multiple zones is that the individual zone sensible loads do not necessary vary with their
ventilation requirement. This causes increased system total ventilation intake airflows - which
are often required to ensure the proper ventilation for each zone at all operation conditions - in
compliance with ASHRAE Standard.
Another difficulty is over-ventilation of non-critical zones. In a multiple-zoned recirculating
ventilation system, a single air.
Beadline 20t6 October In 1. Briefly describe the homogenco.pdf
Beadline: 20t6 October\' In 1. Briefly describe the homogencous reaction and heterogeneous
reaction, and give examples for each phenomena. (30%)
Solution
Homogeneous reaction: Chemical reactions that occur in a single phase (gaseous, liquid, or
solid) is called homogeneous reaction. The most important of homogeneous reactions are the
reactions between gases (e.g., the combination of common gases and oxygen to produce a flame)
and the reactions between liquids or substances dissolved in liquids (e.g., the reactions between
aqueous solutions of acids and bases).
Heterogeneous reaction: Chemical reactions in which the reactants are components of two or
more phases (solid and gas, solid and liquid, two immiscible liquids) or in which one or more
reactants undergo chemical change at an interface, e.g., on the surface of a solid catalyst. The
reaction of metals with acids, the electrochemical changes that occur in batteries and electrolytic
cells, and the phenomena of corrosion are part of the subject of heterogeneous reactions..
A patient has breast cancer which has metastasized to their lungs. T.pdf
A patient has breast cancer which has metastasized to their lungs. This is a very common route of
metastasis, in which cancer cells are drawn into lymphatic capillaries with lymph, move through
the lymphatic system, then gain access to general circulation as the lymphatic ducts empty into
venous circulation. Often, the cancer cells then “seed” the first hospitable organ they encounter
(often the lungs, for non-GI cancers).
Trace the route that cancerous cells took from the left breast, through the lymphatic vessels, and
then through circulation, to the point where they invaded the lung tissue.
Solution
Cancer cells break away from the left breast and attach themselves to the outside wall of any
lymphatic capillary. Then, they accomplish themselves in the vessel wall to flow with the lymph
carried away for infiltration to reach the lymph nodes. There they start multiplying and blocking
the pleural sac (surrounds the lung) which in turn gets filled with fluid or forms a tumor and then
slowly these cells invade the lung tissue..
More from fasttrackcomputersol (17)
Step by step procedures how layout is created and used for transistor.pdf
Step by step procedures how layout is created and used for transistor.pdf
Show all work. I need to know exactly how you got what you got so I .pdf
Show all work. I need to know exactly how you got what you got so I .pdf
Identify the three main threats to biodiversity and explain how each.pdf
Identify the three main threats to biodiversity and explain how each.pdf
Q6. Proteins are used for structural integrity inside and outside of.pdf
Q6. Proteins are used for structural integrity inside and outside of.pdf
Python question...Complete without importing any modules. Ie. Don.pdf
Python question...Complete without importing any modules. Ie. Don.pdf
Please read the following IEEE Spectrum articles and answer the quest.pdf
Please read the following IEEE Spectrum articles and answer the quest.pdf
Perform a search on the Web for articles and stories about social en.pdf
Perform a search on the Web for articles and stories about social en.pdf
Hospital Management Project Simple Scenario We want to develop a.pdf
Hospital Management Project Simple Scenario We want to develop a.pdf
Finish the program below that does several bit-wise manipulations of.pdf
Finish the program below that does several bit-wise manipulations of.pdf
Explain a) advantage of promoting outcrossing in plants and preventi.pdf
Explain a) advantage of promoting outcrossing in plants and preventi.pdf
Essay question Camels must cope with hot desert environments where w.pdf
Essay question Camels must cope with hot desert environments where w.pdf
Describe the excel equation that you can use to measure the volumes l.pdf
Describe the excel equation that you can use to measure the volumes l.pdf
Denise and Christy have the same preferences and incomes.pdf
Denise and Christy have the same preferences and incomes.pdf
Can you create a simple polymorphic program using C++Solution.pdf
Can you create a simple polymorphic program using C++Solution.pdf
1) What are the benefits of DOAS2) What is reheat Why is it requ.pdf
1) What are the benefits of DOAS2) What is reheat Why is it requ.pdf
Beadline 20t6 October In 1. Briefly describe the homogenco.pdf
Beadline 20t6 October In 1. Briefly describe the homogenco.pdf
A patient has breast cancer which has metastasized to their lungs. T.pdf
A patient has breast cancer which has metastasized to their lungs. T.pdf
Recently uploaded
LAND USE LAND COVER AND NDVI OF MIRZAPUR DISTRICT, UP
This Dissertation explores the particular circumstances of Mirzapur, a region located in the
core of India. Mirzapur, with its varied terrains and abundant biodiversity, offers an optimal
environment for investigating the changes in vegetation cover dynamics. Our study utilizes
advanced technologies such as GIS (Geographic Information Systems) and Remote sensing to
analyze the transformations that have taken place over the course of a decade.
The complex relationship between human activities and the environment has been the focus
of extensive research and worry. As the global community grapples with swift urbanization,
population expansion, and economic progress, the effects on natural ecosystems are becoming
more evident. A crucial element of this impact is the alteration of vegetation cover, which plays a
significant role in maintaining the ecological equilibrium of our planet.Land serves as the foundation for all human activities and provides the necessary materials for
these activities. As the most crucial natural resource, its utilization by humans results in different
'Land uses,' which are determined by both human activities and the physical characteristics of the
land.
The utilization of land is impacted by human needs and environmental factors. In countries
like India, rapid population growth and the emphasis on extensive resource exploitation can lead
to significant land degradation, adversely affecting the region's land cover.
Therefore, human intervention has significantly influenced land use patterns over many
centuries, evolving its structure over time and space. In the present era, these changes have
accelerated due to factors such as agriculture and urbanization. Information regarding land use and
cover is essential for various planning and management tasks related to the Earth's surface,
providing crucial environmental data for scientific, resource management, policy purposes, and
diverse human activities.
Accurate understanding of land use and cover is imperative for the development planning
of any area. Consequently, a wide range of professionals, including earth system scientists, land
and water managers, and urban planners, are interested in obtaining data on land use and cover
changes, conversion trends, and other related patterns. The spatial dimensions of land use and
cover support policymakers and scientists in making well-informed decisions, as alterations in
these patterns indicate shifts in economic and social conditions. Monitoring such changes with the
help of Advanced technologies like Remote Sensing and Geographic Information Systems is
crucial for coordinated efforts across different administrative levels. Advanced technologies like
Remote Sensing and Geographic Information Systems
9
Changes in vegetation cover refer to variations in the distribution, composition, and overall
structure of plant communities across different temporal and spatial scales. These changes can
occur natural.
Community pharmacy- Social and preventive pharmacy UNIT 5
Covered community pharmacy topic of the subject Social and preventive pharmacy for Diploma and Bachelor of pharmacy
বাংলাদেশ অর্থনৈতিক সমীক্ষা (Economic Review) ২০২৪ UJS App.pdf
বাংলাদেশের অর্থনৈতিক সমীক্ষা ২০২৪ [Bangladesh Economic Review 2024 Bangla.pdf] কম্পিউটার , ট্যাব ও স্মার্ট ফোন ভার্সন সহ সম্পূর্ণ বাংলা ই-বুক বা pdf বই " সুচিপত্র ...বুকমার্ক মেনু 🔖 ও হাইপার লিংক মেনু 📝👆 যুক্ত ..
আমাদের সবার জন্য খুব খুব গুরুত্বপূর্ণ একটি বই ..বিসিএস, ব্যাংক, ইউনিভার্সিটি ভর্তি ও যে কোন প্রতিযোগিতা মূলক পরীক্ষার জন্য এর খুব ইম্পরট্যান্ট একটি বিষয় ...তাছাড়া বাংলাদেশের সাম্প্রতিক যে কোন ডাটা বা তথ্য এই বইতে পাবেন ...
তাই একজন নাগরিক হিসাবে এই তথ্য গুলো আপনার জানা প্রয়োজন ...।
বিসিএস ও ব্যাংক এর লিখিত পরীক্ষা ...+এছাড়া মাধ্যমিক ও উচ্চমাধ্যমিকের স্টুডেন্টদের জন্য অনেক কাজে আসবে ...
How to Build a Module in Odoo 17 Using the Scaffold Method
Odoo provides an option for creating a module by using a single line command. By using this command the user can make a whole structure of a module. It is very easy for a beginner to make a module. There is no need to make each file manually. This slide will show how to create a module using the scaffold method.
How to Fix the Import Error in the Odoo 17
An import error occurs when a program fails to import a module or library, disrupting its execution. In languages like Python, this issue arises when the specified module cannot be found or accessed, hindering the program's functionality. Resolving import errors is crucial for maintaining smooth software operation and uninterrupted development processes.
How to Manage Your Lost Opportunities in Odoo 17 CRM
Odoo 17 CRM allows us to track why we lose sales opportunities with "Lost Reasons." This helps analyze our sales process and identify areas for improvement. Here's how to configure lost reasons in Odoo 17 CRM
Digital Artifact 1 - 10VCD Environments Unit
Digital Artifact 1 - 10VCD Environments Unit - NGV Pavilion Concept Design
South African Journal of Science: Writing with integrity workshop (2024)
South African Journal of Science: Writing with integrity workshop (2024)Academy of Science of South Africa
A workshop hosted by the South African Journal of Science aimed at postgraduate students and early career researchers with little or no experience in writing and publishing journal articles.DRUGS AND ITS classification slide share
Any substance (other than food) that is used to prevent, diagnose, treat, or relieve symptoms of a
disease or abnormal condition
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Ab...
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Aberdeen
PCOS corelations and management through Ayurveda.
This presentation includes basic of PCOS their pathology and treatment and also Ayurveda correlation of PCOS and Ayurvedic line of treatment mentioned in classics.
Main Java[All of the Base Concepts}.docx
This is part 1 of my Java Learning Journey. This Contains Custom methods, classes, constructors, packages, multithreading , try- catch block, finally block and more.
Recently uploaded (20)
LAND USE LAND COVER AND NDVI OF MIRZAPUR DISTRICT, UP
LAND USE LAND COVER AND NDVI OF MIRZAPUR DISTRICT, UP
Community pharmacy- Social and preventive pharmacy UNIT 5
Community pharmacy- Social and preventive pharmacy UNIT 5
বাংলাদেশ অর্থনৈতিক সমীক্ষা (Economic Review) ২০২৪ UJS App.pdf
বাংলাদেশ অর্থনৈতিক সমীক্ষা (Economic Review) ২০২৪ UJS App.pdf
How to Build a Module in Odoo 17 Using the Scaffold Method
How to Build a Module in Odoo 17 Using the Scaffold Method
How to Manage Your Lost Opportunities in Odoo 17 CRM
How to Manage Your Lost Opportunities in Odoo 17 CRM
Pride Month Slides 2024 David Douglas School District
Pride Month Slides 2024 David Douglas School District
South African Journal of Science: Writing with integrity workshop (2024)
South African Journal of Science: Writing with integrity workshop (2024)
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Ab...
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Ab...
Which one of the following theories is associated with the interactio.pdf
- 1. Which one of the following theories is associated with the interactionist perspective? cultural transmission sociobiology social conflict none of these Solution we know that In sociology, interactionism is a theoretical perspective that derives social processes (such as conflict, cooperation, identity formation) from human interaction So, sociobiology is realated with interactionism option-B is correct