WATERGUARD COOL COOL is a high build flexible,
elastomeric aqueous based waterproofing coating.
containing special polymer and fillers. WATERGUARD
COOL COOL provides extremely long lasting protective
coating that creates a thermal barrier which stands severe
temperature and changes and provides long lasting
protection against wind and rain. It protects concrete
against attack from atmospheric carbon dioxide, airborne,
chlorides, acid, rain, weathering etc. WATERGUARD
COOL COOL is a ready to use, ensuring waterproofing. It
also provides extremely tough decorative waterproof
coating, which allows breathing the surface.
WATERGUARD EASY COOL is a high build flexible, elastomeric aqueous based waterproofing coating, Containing special polymer and fillers. WATERGUARD EASY COOL provides extremely long lasting protective coating that creates a reflective thermal barrier which stands severe temperature and changes and provides long lasting protection against wind and rain. It protects concrete against attack from atmospheric carbon dioxide, airborne, chlorides, acid, rain, weathering etc. WATERGUARD EASY COOL is a ready to use, ensuring waterproofing. It also provides extremely tough decorative waterproof coating, which allows breathing the surface.
WATERGUARD EASY COOL is a high build flexible, elastomeric aqueous based waterproofing coating, Containing special polymer and fillers. WATERGUARD EASY COOL provides extremely long lasting protective coating that creates a reflective thermal barrier which stands severe temperature and changes and provides long lasting protection against wind and rain. It protects concrete against attack from atmospheric carbon dioxide, airborne, chlorides, acid, rain, weathering etc. WATERGUARD EASY COOL is a ready to use, ensuring waterproofing. It also provides extremely tough decorative waterproof coating, which allows breathing the surface.
WATERGUARD PUD SPECIAL is water thinable, PUD (Polyurethane dispersion) based wall coating recommended for interior and exteriors concrete substrate.
The coating curing forms a tough elastomeric which offers the most advanced waterproofing technology and provides long term performance.
WATERGUARD FIBERGLASS MESH is a ready-to-use, thin, strong yet flexible, alkali-resistant mesh for embedment with waterproofing and crack-isolation membranes, residential and commercial floors, walls and ceilings.
WATERGUARD FIBERGLASS MESH reinforces and improves the performance of FAIRMATE’s waterproofing membranes when applied over cracks, coves and corners and around drains on residential and commercial applications. WATERGUARD FIBERGLASS MESH can be cut to size with scissors or a razor knife, and has excellent compatibility with all cement- or epoxy-based mortars.
WATERGUARD EASY COOL is a high build flexible, elastomeric aqueous based waterproofing coating, Containing special polymer and fillers. WATERGUARD EASY COOL provides extremely long lasting protective coating that creates a reflective thermal barrier which stands severe temperature and changes and provides long lasting protection against wind and rain. It protects concrete against attack from atmospheric carbon dioxide, airborne, chlorides, acid, rain, weathering etc. WATERGUARD EASY COOL is a ready to use, ensuring waterproofing. It also provides extremely tough decorative waterproof coating, which allows breathing the surface.
WATERGUARD EASY COOL is a high build flexible, elastomeric aqueous based waterproofing coating, Containing special polymer and fillers. WATERGUARD EASY COOL provides extremely long lasting protective coating that creates a reflective thermal barrier which stands severe temperature and changes and provides long lasting protection against wind and rain. It protects concrete against attack from atmospheric carbon dioxide, airborne, chlorides, acid, rain, weathering etc. WATERGUARD EASY COOL is a ready to use, ensuring waterproofing. It also provides extremely tough decorative waterproof coating, which allows breathing the surface.
WATERGUARD PUD SPECIAL is water thinable, PUD (Polyurethane dispersion) based wall coating recommended for interior and exteriors concrete substrate.
The coating curing forms a tough elastomeric which offers the most advanced waterproofing technology and provides long term performance.
WATERGUARD FIBERGLASS MESH is a ready-to-use, thin, strong yet flexible, alkali-resistant mesh for embedment with waterproofing and crack-isolation membranes, residential and commercial floors, walls and ceilings.
WATERGUARD FIBERGLASS MESH reinforces and improves the performance of FAIRMATE’s waterproofing membranes when applied over cracks, coves and corners and around drains on residential and commercial applications. WATERGUARD FIBERGLASS MESH can be cut to size with scissors or a razor knife, and has excellent compatibility with all cement- or epoxy-based mortars.
WATERGUARD CL is a brush applied coal tar based high performance waterproof coating for cementitious surfaces.
Single pack
Economical
Easy to apply
Excellent Chemical Resistance
Good water proofing Characteristics
Good adhesion on cementitious substrate.
Flexible
All structures that are required to be waterproofed and protected against the ingress of moisture like Basements, Water tanks, Swimming Pools, Retaining Walls, Bridge Walls, Tunnels, Lift Shafts, Sewage Tanks, Reservoirs, Dams, Dock gates etc.
WATERGUARD FLEXIBLE comprises of a single part acrylic polymer based flexible waterproofing coating, which contains special filler to ensure waterproofing. It also provides extremely tough decorative waterproof coating that allows to breath the surface.
WATERGUARD COOL COOL is a high build flexible, elastomeric aqueous based waterproofing coating. containing special polymer and fillers. WATERGUARD COOL COOL provides extremely long lasting protective coating that creates a thermal barrier which stands severe temperature and changes and provides long lasting protection against wind and rain. It protects concrete against attack from atmospheric carbon dioxide, airborne, chlorides, acid, rain, weathering etc. WATERGUARD COOL COOL is a ready to use, ensuring waterproofing. It also provides extremely tough decorative waterproof coating, which allows breathing the surface.
WATERGUARD DAMPPROOF is a silicone based ready to use injection damp proof when injected into masonary forms a chemical damp proof course. WATERGUARD DAMPPROOF provides an invisible barrier to dampness and remains effective for many years. WATERGUARD DAMPPROOF utilizes novel silane technology, which results in a high performance, low odour injection material. It also breaths capilary and develops intial waterrepellancy quickly, and gives complete protection against dampness.
Professional gun foam with even structure and low post expansion for demanding users. Packed in an aerosol can, can be used with a foam gun, moisture curing. cured foam is good temperature and sound insulator. The foam has a very good adhesion properties. Adheres well to most construction materials, Expert Teflon, polyethylene and silicone surface. After curing does not resist uv- radiation and needs to be covered.
WATERGUARD DAMPPROOF is a silicone based ready to use injection damp proof when injected into masonary forms a chemical damp proof course. WATERGUARD DAMPPROOF provides an invisible barrier to dampness and remains effective for many years. WATERGUARD DAMPPROOF utilizes novel silane technology, which results in a high performance, low odour injection material. It also breaths capilary and develops intial waterrepellancy quickly, and gives complete protection against dampness.
WATERGUARD EP is a two part, solvent free, epoxy resin based waterproofing coating for terrace, balconies, roof slabs & potable water tanks. The cured film is extremely tough & has a smooth, hard, semiglossy surface with good slip resistant property. WATERGUARD EP has excellent adhesion property & ensures flexibility to take care of thermal expansion contraction.
WATERGUARD PU MEMBRANE is a pitch extended polyurethane based elastomeric coating, formulated to give long lasting, maintenance free, and superior waterproofing protection for concrete and steel structures. The coating curing forms a tough elastomeric membrane which offers the most advanced waterproofing technology and provides long term performance and security of the waterproof environment.
WATERGUARD I is two part polymer based waterproofing coating, specially designed polymer to ensure perfect water tightness, with insulating property to cool down temperatures and ensures the flexibility to cover the thermal stresses. WATERGUARD I has an excellent frost resistance and can be used on vertical and horizontal surfaces.
WATERGUARD LIQUID MEMBRANE PR is a three component polyester based system that forms a permanent seamless, high permeable membrane. Extremely durable and tear resistance.
WATERGUARD ROOFCOAT is a highly specialized co-acrylic polymeric waterproofing compound designed for use with cement compositions. It is used in mortar and concrete as an admixture to increase resistance to ingress of moisture/water , wear resistance and durable material.
It is used with cement as a reliable water-resistant bonding agent.
Professional fire protection foam with low post expansion for demanding users. Packed in an aerosol can, can be used with a foam gun, moisture curing. Good resistance to moisture and mould. Fast curing. Great results at low temperatures. Cured foam is a good temperature and sound insulator. The foam has very good adhesion properties. Adheres well to most construction materials, except Teflon, polyethylene and silicone surfaces. After curing does not resist UV-radiation and needs to be covered.
WATERGUARD-PVC WATER STOPS are manufactured from a high quality virgin PVC compound which has been formulated to give excellent flexibility and durability to offer long life performance in concrete structures against water leakages. They are extruded in a range of profiles.
WATERGUARD-PVC WATER STOPS is designed to stop any possible leakage from construction, Contraction and Expansion joints in concrete elements. WATERGUARD-PVC WATER STOPS is used for internal fixing and external fixing. Internal fixing profiles have brass eyelets at about 300mm spacing enabling the water stop to be tied to the reinforcement for support during concreting. External fixing profiles can be fixed by using nails. WATERGUARD-PVC WATER STOPS are manufactured to meet the most stringent specifications and are resistant to abrasion and chemicals. STANDARDS : CRD - C572 - 74 BS 6920
WATERGUARD MEMBRANE EPDM (Ethylene Propylene Diene Terpolymer) membrane is a 100% cured unreinforced single ply elastomeric compound (synthetic rubber membrane) manufactured from ethylene, propylene and a small amount of diene monomer. WATERGUARD MEMBRANE EPDM membrane is available in black colour. The EPDM membrane is a vulcanized / thermo set membrane that has been fully cured in the manufacturing process. EPDM membrane has stable physical properties, which makes repairs easier in the unlikely event of cuts or tears.
WATERGUARD is a prepacked single component powder based on processed cements and special fillers that can be brush applied to well prepared sound substrates to provide extremely tough durable waterproof coating. It is to be applied @ 2-3 mm thickness for water tanks, basements etc., where water under hydrostatic pressure exists WATERGUARD must be used in conjunction with WATERGUARD T.
WATERGUARD C is a high build flexible, ready to use, waterproofing coating which contains special waterproofing filler to ensure waterproofing. It also provides extremely tough decorative waterproof coating, which allows to breathe the surface.
WATERGUARD C is a high build flexible, ready to use, waterproofing coating which contains special waterproofing filler to ensure waterproofing. It also provides extremely tough decorative waterproof coating, which allows to breathe the surface.
WATERGUARD S is a single pack colourless acrylic based waterproof coating which can be applied by brush or roller. Two coats of WATERGUARD S will ensure 80-100 micron film thickness. WATERGUARD S should be applied without any dilution. The product starts curing immediately on exposure to air due to the in-built catalyst and curing will completed within 24 hrs of application, WATERGUARD S gives a totally dry elastic film within 24 hrs. WATERGUARD S when used as recommended two coats to form an impermeable coating by blocking the capillaries and pores.
WATERGUARD VR is a single pack vapour resistance waterproof coating, specially designed polymer to ensure perfect water tightness and ensures the flexibility to cover thermal stresses. WATERGUARD VR has an excellent vage resistance & can be used on vertical and horizontal surfaces.
WATERGUARD CL is a brush applied coal tar based high performance waterproof coating for cementitious surfaces.
Single pack
Economical
Easy to apply
Excellent Chemical Resistance
Good water proofing Characteristics
Good adhesion on cementitious substrate.
Flexible
All structures that are required to be waterproofed and protected against the ingress of moisture like Basements, Water tanks, Swimming Pools, Retaining Walls, Bridge Walls, Tunnels, Lift Shafts, Sewage Tanks, Reservoirs, Dams, Dock gates etc.
WATERGUARD FLEXIBLE comprises of a single part acrylic polymer based flexible waterproofing coating, which contains special filler to ensure waterproofing. It also provides extremely tough decorative waterproof coating that allows to breath the surface.
WATERGUARD COOL COOL is a high build flexible, elastomeric aqueous based waterproofing coating. containing special polymer and fillers. WATERGUARD COOL COOL provides extremely long lasting protective coating that creates a thermal barrier which stands severe temperature and changes and provides long lasting protection against wind and rain. It protects concrete against attack from atmospheric carbon dioxide, airborne, chlorides, acid, rain, weathering etc. WATERGUARD COOL COOL is a ready to use, ensuring waterproofing. It also provides extremely tough decorative waterproof coating, which allows breathing the surface.
WATERGUARD DAMPPROOF is a silicone based ready to use injection damp proof when injected into masonary forms a chemical damp proof course. WATERGUARD DAMPPROOF provides an invisible barrier to dampness and remains effective for many years. WATERGUARD DAMPPROOF utilizes novel silane technology, which results in a high performance, low odour injection material. It also breaths capilary and develops intial waterrepellancy quickly, and gives complete protection against dampness.
Professional gun foam with even structure and low post expansion for demanding users. Packed in an aerosol can, can be used with a foam gun, moisture curing. cured foam is good temperature and sound insulator. The foam has a very good adhesion properties. Adheres well to most construction materials, Expert Teflon, polyethylene and silicone surface. After curing does not resist uv- radiation and needs to be covered.
WATERGUARD DAMPPROOF is a silicone based ready to use injection damp proof when injected into masonary forms a chemical damp proof course. WATERGUARD DAMPPROOF provides an invisible barrier to dampness and remains effective for many years. WATERGUARD DAMPPROOF utilizes novel silane technology, which results in a high performance, low odour injection material. It also breaths capilary and develops intial waterrepellancy quickly, and gives complete protection against dampness.
WATERGUARD EP is a two part, solvent free, epoxy resin based waterproofing coating for terrace, balconies, roof slabs & potable water tanks. The cured film is extremely tough & has a smooth, hard, semiglossy surface with good slip resistant property. WATERGUARD EP has excellent adhesion property & ensures flexibility to take care of thermal expansion contraction.
WATERGUARD PU MEMBRANE is a pitch extended polyurethane based elastomeric coating, formulated to give long lasting, maintenance free, and superior waterproofing protection for concrete and steel structures. The coating curing forms a tough elastomeric membrane which offers the most advanced waterproofing technology and provides long term performance and security of the waterproof environment.
WATERGUARD I is two part polymer based waterproofing coating, specially designed polymer to ensure perfect water tightness, with insulating property to cool down temperatures and ensures the flexibility to cover the thermal stresses. WATERGUARD I has an excellent frost resistance and can be used on vertical and horizontal surfaces.
WATERGUARD LIQUID MEMBRANE PR is a three component polyester based system that forms a permanent seamless, high permeable membrane. Extremely durable and tear resistance.
WATERGUARD ROOFCOAT is a highly specialized co-acrylic polymeric waterproofing compound designed for use with cement compositions. It is used in mortar and concrete as an admixture to increase resistance to ingress of moisture/water , wear resistance and durable material.
It is used with cement as a reliable water-resistant bonding agent.
Professional fire protection foam with low post expansion for demanding users. Packed in an aerosol can, can be used with a foam gun, moisture curing. Good resistance to moisture and mould. Fast curing. Great results at low temperatures. Cured foam is a good temperature and sound insulator. The foam has very good adhesion properties. Adheres well to most construction materials, except Teflon, polyethylene and silicone surfaces. After curing does not resist UV-radiation and needs to be covered.
WATERGUARD-PVC WATER STOPS are manufactured from a high quality virgin PVC compound which has been formulated to give excellent flexibility and durability to offer long life performance in concrete structures against water leakages. They are extruded in a range of profiles.
WATERGUARD-PVC WATER STOPS is designed to stop any possible leakage from construction, Contraction and Expansion joints in concrete elements. WATERGUARD-PVC WATER STOPS is used for internal fixing and external fixing. Internal fixing profiles have brass eyelets at about 300mm spacing enabling the water stop to be tied to the reinforcement for support during concreting. External fixing profiles can be fixed by using nails. WATERGUARD-PVC WATER STOPS are manufactured to meet the most stringent specifications and are resistant to abrasion and chemicals. STANDARDS : CRD - C572 - 74 BS 6920
WATERGUARD MEMBRANE EPDM (Ethylene Propylene Diene Terpolymer) membrane is a 100% cured unreinforced single ply elastomeric compound (synthetic rubber membrane) manufactured from ethylene, propylene and a small amount of diene monomer. WATERGUARD MEMBRANE EPDM membrane is available in black colour. The EPDM membrane is a vulcanized / thermo set membrane that has been fully cured in the manufacturing process. EPDM membrane has stable physical properties, which makes repairs easier in the unlikely event of cuts or tears.
WATERGUARD is a prepacked single component powder based on processed cements and special fillers that can be brush applied to well prepared sound substrates to provide extremely tough durable waterproof coating. It is to be applied @ 2-3 mm thickness for water tanks, basements etc., where water under hydrostatic pressure exists WATERGUARD must be used in conjunction with WATERGUARD T.
WATERGUARD C is a high build flexible, ready to use, waterproofing coating which contains special waterproofing filler to ensure waterproofing. It also provides extremely tough decorative waterproof coating, which allows to breathe the surface.
WATERGUARD C is a high build flexible, ready to use, waterproofing coating which contains special waterproofing filler to ensure waterproofing. It also provides extremely tough decorative waterproof coating, which allows to breathe the surface.
WATERGUARD S is a single pack colourless acrylic based waterproof coating which can be applied by brush or roller. Two coats of WATERGUARD S will ensure 80-100 micron film thickness. WATERGUARD S should be applied without any dilution. The product starts curing immediately on exposure to air due to the in-built catalyst and curing will completed within 24 hrs of application, WATERGUARD S gives a totally dry elastic film within 24 hrs. WATERGUARD S when used as recommended two coats to form an impermeable coating by blocking the capillaries and pores.
WATERGUARD VR is a single pack vapour resistance waterproof coating, specially designed polymer to ensure perfect water tightness and ensures the flexibility to cover thermal stresses. WATERGUARD VR has an excellent vage resistance & can be used on vertical and horizontal surfaces.
WATERGUARD BITUCOAT is dark low volatile petroleum residue modified by oxidation process with grade 85/25 conforming to IS:702. Besides being a water proof, elastic and adhesive, Waterguard Bitucoat ( 85/25 grade) is corrosion proof and acid alkali resistant. WATERGUARD BITUCOAT is highly resistant to aggressive soils and soluble salts providing an effective continuous barrier and protection against water bourne damage. WATERGUARD BITUCOAT is also ideally suited as a vapour/salt barrier to building facades behind granite, marble, stone cladding, and curtain wall elements.
WATERGUARD FLEXIBLE comprises of a single part acrylic polymer based flexible waterproofing coating, which contains special filler to ensure waterproofing. It also provides extremely tough decorative waterproof coating that allows to breath the surface.
WATERGUARD A SUPER is a prepacked two component powder and liquid polymer, consisting of processed cements and special fillers that can be applied over well prepared sound substrates to provide extremely tough durable waterproof rendering, 2-3 mm thickness for water tanks, basements etc.
WATERGUARD A - IMPROVED PERFORMANCE is used to all structures that are required to be waterproofed and protected against the ingress of moisture like Basements, Water tanks, Swimming Pools, Retaining Walls, Bridge Walls, Tunnels, Lift Shafts, Sewage Tanks, Reservoirs, Dams, Dock gates etc. WATERGUARD A - IMPROVED PERFORMANCE provides a tough and durable coating and it cannot be easily damaged or worn out.
DryWall Thermotek repels rain penetration and is scientifically proven to reduce heat loss in single skin masonry, with an energy saving of up to 29%. One single coat application is all it takes.
WATERGUARD LP is a two part polysulphide based waterproofing coating which provides a chemically resistant coating for walls, terrace, balconies, roof slabs, storage tanks and portable water tank. The cured film is extremely tough, flexible and has a smooth, hard, semi glossy surface with good slip resistant property. WATERGUARD LP has excellent adhesion property & ensures flexibility to take care of thermal expansion contraction.
Waterproofing describes making an object waterproof or water-resistant.
Building water-proofing is a process which is designed to prevent water from penetrating a building.
Usually extensive waterproofing measures are added to a building at the time of construction, to provide moisture control from the start
Waterproofing may also be done after a building is built, to address problems as they emerge or as part of a building retrofit
Internal areas that are waterproofed include :
bathrooms,
shower recesses,
laundries
toilets.
WATERGUARD BRICKSEAL is a single component, cementitious prepacked powder based on processed cements and special fillers that can be applied by brush to well prepared sound substrates to provide extremely tough durable waterproof coating of 1-2 mm thickness for brick masonry or plastered surface.
WATERGUARD PUD SPECIAL is water thinable, PUD (Polyurethane dispersion) based wall coating recommended for interior and exteriors concrete substrate.
The coating curing forms a tough elastomeric which offers the most advanced waterproofing technology and provides long term performance.
WATERGUARD EP is a two part, solvent free, epoxy resin based waterproofing coating for terrace, balconies, roof slabs & potable water tanks. The cured film is extremely tough & has a smooth, hard, semiglossy surface with good slip resistant property. WATERGUARD EP has excellent adhesion property & ensures flexibility to take care of thermal expansion contraction.
WATERGUARD A (WHITE) is a prepacked two component Powder and Liquid polymer, processed white cement and special fillers that can be applied by brush to well prepared sound substrates to provide extremely tough durable waterproof which renders 2-3mm thick for water tanks, basements etc.
Aerogel is a type of solid material that is composed of a gel-like structure, in which the liquid component has been replaced with gas. This results in a material that is extremely lightweight, with a density that can be as low as three times that of air.
Aerogels are often referred to as "frozen smoke" or "solid smoke" due to their translucent, wispy appearance. They were first developed in the 1930s by Samuel Kistler, who used a process called supercritical drying to create the material.
Aerogels are highly insulating, with a thermal conductivity that is much lower than that of traditional insulating materials like fiberglass or foam. They are also highly absorbent, making them useful for applications such as oil spill cleanup or water filtration.
Aerogels can be made from a variety of materials, including silica, carbon, and metal oxides. They are used in a range of industries, including aerospace, energy, and electronics, due to their unique properties and versatility.
whatisaerogelusefor
carbnaerogel
Aerogel properties
Chemical properties of aerogel
aerogel come from natura lmaterials
aerogel change the future
Doped' nanoparticles can absorb more sunlight
Aerogels based on nanoparticles can be used as a photocatalyst, which enables or accelerates chemical reactions (when combined with sunlight) to produce extremely useful products in the modern world, including hydrogen.
NASA aerogel
Aerogel is 1,000 times less dense than glass, another silicon-based solid. This exotic material has many unusual properties, such as uniquely low thermal conductivity, refractive index, and sound speed, in addition to its exceptional ability to capture hypervelocity dust.
Is aerogel used by NASA?
NASA turned to the material to keep rocket fuel at cryogenic temperatures and worked with industry to create the world's first practical, flexible aerogel blankets in the 1990s.
In space, aerogels can be particularly useful for thermal insulation in extreme low-temperature and low pressure environments, such as Mars.
Aerogels: Thinner, Lighter, Stronger,
Picture preparing a bowl full of a sweet, gelatin dessert. The gelatin powder is mixed with hot water, and then the mixture is cooled in a refrigerator until it sets. It is now a gel. If that wiggly gel were placed in an oven and all of the moisture dried out of it, all that would be left would be a pile of powder.
But imagine if the dried gelatin maintained its shape, even after the liquid had been removed. The structure of the gel would remain, but it would be extremely light due to low density. This is precisely how aerogels are made.
Aerogels are among the lightest solid materials known to man. They are created by combining a polymer with a solvent to form a gel, and then removing the liquid from the gel and replacing it with air. Aerogels are extremely porous and very low in density. They are solid to the touch. This translucent material is considered one of the finest insulation materials available. Aerogel
FLOWGROUT 60 (M) is a single pack, ultra high strength, free flowing, non-shrink grout. FLOWGROUT 60 (M) is a blend of specially processed cement and special fillers, free from corrosive substances and additives. FLOWGROUT 60 (M) is supplied as ready to use grout requiring addition of precise quantity of water at site (3.750 to 4 Litre/25 Kg Grout). FLOWGROUT 60 (M) is suitable for gap widths between 10mm - 50mm. For width less than 10mm FLOWGROUT 60 (M) resin grout can be used (see separate data sheet for more information) for thickness in excess of 50mm.
FLOWGROUT 60 (S) is based on specially processed cement containing fillers and additives. FLOWGROUT 60 (S) is supplied as ready to use grout requiring addition of precise quantity of water at site (3.750 to 4 Litre/25 Kg Grout). FLOWGROUT 60 (S) is suitable for gap widths of between 10mm - 50mm. For width less than 10mm FLOWGROUT 60 (S) can be used (see separate data sheet for more information) for thickness in excess fo 50mm. (say 75-100), cleaned washed 10mm aggregates can be incorporated at the rate of 50% - 100% of the quantity of grout used.
FLOWGROUT 60 is a single pack ready to use, ultra high strength, free flowing, non shrink grout. FLOWGROUT 60 is a blend of specially processed cement and special fillers, free from corrosive substances and additives. It confirming to BS:1881 Part-116, 1983, BS:4551, 1980 and ASTM C 469-83, ASTM C 940.
FLOWGROUT AG is a high strength, super flowing, large section cementitious grout. It is a blend of specially selected cement, silica, aggregates and additives, when mixed with water. It produces a consistent, reliable, non-shrink, ultra high strength large section grout.
FLOWGROUT AG complies to BS 6319 : Part-2 and ASTM C 157-93.
A Single pack ready to use, high strength, free flowing, non shrink grout. FLOWGROUT 40 is a blend of specially processed cement and special fillers, free from corrosive substances and additives. It confirming to BS : 1881 Part-116, 1983, BS : 4551 : 1980 and ASTM C 469-83, ASTM C 940.
FAIRGROUT is a two pack high strength, non-shrink polymer cementitious grout with both high early and ultimate strengths. FAIRGROUT has excellent flow properties and will not shrink after placing. FAIRGROUT is free from corrosive substances. FAIRGROUT is suitable for use in gap width of between 10-50 mm. In order to achieve optimum quality exposed FAIRGROUT and the outer surface of any shuttering should be protected from weather conditions for at least 12 hours. Sacks, matting, plastic sheets etc. should be placed as protection immediately after placing the grout.
FAIRADD is a plasticising, shrinkage compensating grout additive. FAIRADD is a single pack powdered admixture which when added to cement (cement : sand) produces an easy flow, high strength, shrinkage compensating grout. It is ideally suited for grouting and in-filling where a non-shrink, free-flowing product is required. FAIRADD imparts super-plasticising / high water reducing properties as well as positive expansion.
FAIRADD S is a combination of an expanding and plasticising agent. The expanding agent, generates gas during the hydration process before the initial set takes place, counteracts the natural settlement and shrinkage of the grout. The plasticising agent enables high workability mixes to be produced with relatively low water/cement ratio. Stability and cohesion of the grout is greatly increased. The expansion is controlled to avoid excess built up that is sufficient to provide high bonding of the grout to the contact surfaces with the absence of voids.
It confirming to BS 8110 Part-1 : 1985, Section 8.9.4.6.
FAIRADD CG is supplied as a dry powder requiring only the addition of a controlled amount of clean water and cement to produce a free flowing non shrink grout. FAIRADD CG is an all fines admixture containing expansive cement which impart controlled expansion in the plastic state whilst minimizing water demand. The material is designed to allow uniform mixing, and eliminates unwanted segregation and bleeding.
FAIRADD CG complies to BS 1881 : Part-116, 1983 and ASTM C 827-87, ASTM C 1107 Grade C.
ANCHORGROUT can be used for high strength corrosion resistant, anchoring of bolts and a permanent installation of reinforcement doweling and starter bars, foundation bolts, base plates, hand rails, safety fences, wall tiles, railway tracks, tie back anchors and grout for tower cranes.
Due to its thixotropic nature, ANCHORGROUT can be used in vertical, horizontal and overhead situations where the hole diameter exceeds the bar diameter by not less than 4 mm and not more than 25 mm.
Where it is necessary to obtain a quick high strength fixing into concrete, brick, masonry, block-work, rock or other material of sufficient strength to take the load required of the fixing. ANCHORFIX CAPSULE can be fixed into horizontal and vertical surfaces, or overhead.
FAIRSCREED R is used to repair spalled columns, soffits, gutters, lintels etc.
It is also used for repairing of damaged concrete floors, spalled concrete roads and runways.
Used to repair damaged concrete kerbs, pipes and precast units, as a bedding mortar for tiles on uneven floors or under corrosive conditions.
FAIRSCREED PR is the name given to a range of polyester based products which will fulfill many specialist applications in the jointing, patching and repair fields of the building and civil engineering industries.
The mixing of resin and hardener starts a polymerisation process resulting in excellent mechanical properties like high compressive strength, high flexural strength, high tensile strength, corrosion resistance of cured material. The unique hardner system in the FAIRSCREED PR range enables the mix to be varied from a pourable consistency to a trowelable mortar without significantly affecting the setting times or strengths achieved. Being polyester-based, selected grades of FAIRSCREED PR will harden and cure at temperatures down to freezing point.
This wide tolerance in use makes FAIRSCREED PR almost fullproof, and because part packs and extra aggregate can be used, the material is very economical.
FAIRSCREED FLOORPATCH is a fast curing, high strength, trowel applied, four component Methacrylate resin mortar, designed for rapid and permanent repairs to concrete and masonry surfaces.
FAIRMATE SILENT BREAK HSCA is a noncombustible and non-explosive material. It is safe and convenient in transportation, storage and operation. FAIRMATE SILENT BREAK HSCA is a silent demolition agent which does not cause any Vibration, noise, flying rocks, ash and hazardous gas during demolition. Demolition and cutting are allowed to be used according to working scheme. FAIRMATE SILENT BREAK HSCA can gain a high yield for mining of granite, marble etc. It is very easy to crush & remain reinforced concrete structures on demand during demolition.
FAIRMATE CARBON WRAP is based on new technology designed to completely guarantee the original structure's performance by increasing the strength, durability and vibration resistance. FAIRMATE CARBON WRAP is applied to deteriorated concrete areas on horizontally and vertically.
FAIRCRETE SBR is a single component white emulsion polymer specially designed for use as a bonding aid and for cementitious systems. It is resistant to hydrolysis and can therefore be used for external applications too.
FAIRCRETE SBR(S) is a single component white emulsion polymer specially designed for use as a bonding aid and for cementitious systems. It is resistant to hydrolysis and can therefore be used for external applications too.
FAIRCRETE FBR is a polymer specially formulated for use with cement formulation. It is design to improve the quality of site-batched cementitious mortars and slurries.
FAIRCRETE SB complies to BS 6319.
FAIRCRETE FBR is a polymer specially formulated for use with cement formulation. It is design to improve the quality of site-batched cementitious mortars and slurries.
2. Benefits
Ready to use.
Available in various colours.
Can be applied on vertical & horizontal surfaces.
Colours are stable.
Gives insulation properties.
Abrasion resistant.
Allows the surface to breathe.
Flexible.
Cost effective.
Easy to apply.
Excellent watertightness.
Thermal barrier that can enhance building climatic conditions.
Temperature reduction from 8% to 20%, protect against wind and rain.
Durable - high UV resistance.
3. Uses
WATERGUARD COOL COOL is used for waterproofing and protection in
all types of foundations, toilets, sunken slab, sub-soil structure, septic tank,
basement. WATERGUARD COOL COOL is applied on the following
substrates, concrete, Asbestos sheet, Waterproof and roofing materials.
4. Description
WATERGUARD COOL COOL is a high build flexible, elastomeric aqueous
based waterproofing coating. containing special polymer and fillers.
WATERGUARD COOL COOL provides extremely long lasting protective
coating that creates a thermal barrier which stands severe temperature and
changes and provides long lasting protection against wind and rain. It
protects concrete against attack from atmospheric carbon dioxide, airborne,
chlorides, acid, rain, weathering etc. WATERGUARD COOL COOL is a
ready to use, ensuring waterproofing. It also provides extremely tough
decorative waterproof coating, which allows breathing the surface.
5. Properties
Surface finish : Matt
Application Temperature : 3ºC to 40ºC
Dry Time : 30 minutes
Colour : 400 shades as per our shade card
Insulation : Two coats of WATERGUARD COOL
COOL will ensure 8ºC to 10 ºC less
temperature.
Over coating time : 3-4 hours
6. Packing & Coverage
WATERGUARD COOL COOL is supplied in 1, 5, 20 kgs. It has a coverage
of 4-5 m²/kg/two coats (200 microns WFT). Coverage of WATERGUARD
COOL COOL depends on the surface.
7. Packing & Coverage
WATERGUARD COOL COOL is supplied in 1, 5, 20 kgs. It has a coverage
of 4-5 m²/kg/two coats (200 microns WFT). Coverage of WATERGUARD
COOL COOL depends on the surface.