WATERGUARD COOL COOL is a high build flexible, elastomeric aqueous based waterproofing coating. containing special polymer and fillers. WATERGUARD COOL COOL provides extremely long lasting protective coating that creates a thermal barrier which stands severe temperature and changes and provides long lasting protection against wind and rain. It protects concrete against attack from atmospheric carbon dioxide, airborne, chlorides, acid, rain, weathering etc. WATERGUARD COOL COOL is a ready to use, ensuring waterproofing. It also provides extremely tough decorative waterproof coating, which allows breathing the surface.
WATERGUARD EASY COOL is a high build flexible, elastomeric aqueous based waterproofing coating, Containing special polymer and fillers. WATERGUARD EASY COOL provides extremely long lasting protective coating that creates a reflective thermal barrier which stands severe temperature and changes and provides long lasting protection against wind and rain. It protects concrete against attack from atmospheric carbon dioxide, airborne, chlorides, acid, rain, weathering etc. WATERGUARD EASY COOL is a ready to use, ensuring waterproofing. It also provides extremely tough decorative waterproof coating, which allows breathing the surface.
WATERGUARD EASY COOL is a high build flexible, elastomeric aqueous based waterproofing coating, Containing special polymer and fillers. WATERGUARD EASY COOL provides extremely long lasting protective coating that creates a reflective thermal barrier which stands severe temperature and changes and provides long lasting protection against wind and rain. It protects concrete against attack from atmospheric carbon dioxide, airborne, chlorides, acid, rain, weathering etc. WATERGUARD EASY COOL is a ready to use, ensuring waterproofing. It also provides extremely tough decorative waterproof coating, which allows breathing the surface.
WATERGUARD is a prepacked single component powder based on processed cements and special fillers that can be brush applied to well prepared sound substrates to provide extremely tough durable waterproof coating. It is to be applied @ 2-3 mm thickness for water tanks, basements etc., where water under hydrostatic pressure exists WATERGUARD must be used in conjunction with WATERGUARD T.
WATERGUARD EASY COOL is a high build flexible, elastomeric aqueous based waterproofing coating, Containing special polymer and fillers. WATERGUARD EASY COOL provides extremely long lasting protective coating that creates a reflective thermal barrier which stands severe temperature and changes and provides long lasting protection against wind and rain. It protects concrete against attack from atmospheric carbon dioxide, airborne, chlorides, acid, rain, weathering etc. WATERGUARD EASY COOL is a ready to use, ensuring waterproofing. It also provides extremely tough decorative waterproof coating, which allows breathing the surface.
WATERGUARD EASY COOL is a high build flexible, elastomeric aqueous based waterproofing coating, Containing special polymer and fillers. WATERGUARD EASY COOL provides extremely long lasting protective coating that creates a reflective thermal barrier which stands severe temperature and changes and provides long lasting protection against wind and rain. It protects concrete against attack from atmospheric carbon dioxide, airborne, chlorides, acid, rain, weathering etc. WATERGUARD EASY COOL is a ready to use, ensuring waterproofing. It also provides extremely tough decorative waterproof coating, which allows breathing the surface.
WATERGUARD is a prepacked single component powder based on processed cements and special fillers that can be brush applied to well prepared sound substrates to provide extremely tough durable waterproof coating. It is to be applied @ 2-3 mm thickness for water tanks, basements etc., where water under hydrostatic pressure exists WATERGUARD must be used in conjunction with WATERGUARD T.
WATERGUARD C is a high build flexible, ready to use, waterproofing coating which contains special waterproofing filler to ensure waterproofing. It also provides extremely tough decorative waterproof coating, which allows to breathe the surface.
WATERGUARD C is a high build flexible, ready to use, waterproofing coating which contains special waterproofing filler to ensure waterproofing. It also provides extremely tough decorative waterproof coating, which allows to breathe the surface.
WATERGUARD S is a single pack colourless acrylic based waterproof coating which can be applied by brush or roller. Two coats of WATERGUARD S will ensure 80-100 micron film thickness. WATERGUARD S should be applied without any dilution. The product starts curing immediately on exposure to air due to the in-built catalyst and curing will completed within 24 hrs of application, WATERGUARD S gives a totally dry elastic film within 24 hrs. WATERGUARD S when used as recommended two coats to form an impermeable coating by blocking the capillaries and pores.
WATERGUARD VR is a single pack vapour resistance waterproof coating, specially designed polymer to ensure perfect water tightness and ensures the flexibility to cover thermal stresses. WATERGUARD VR has an excellent vage resistance & can be used on vertical and horizontal surfaces.
WATERGUARD BITUCOAT is dark low volatile petroleum residue modified by oxidation process with grade 85/25 conforming to IS:702. Besides being a water proof, elastic and adhesive, Waterguard Bitucoat ( 85/25 grade) is corrosion proof and acid alkali resistant. WATERGUARD BITUCOAT is highly resistant to aggressive soils and soluble salts providing an effective continuous barrier and protection against water bourne damage. WATERGUARD BITUCOAT is also ideally suited as a vapour/salt barrier to building facades behind granite, marble, stone cladding, and curtain wall elements.
WATERGUARD FLEXIBLE comprises of a single part acrylic polymer based flexible waterproofing coating, which contains special filler to ensure waterproofing. It also provides extremely tough decorative waterproof coating that allows to breath the surface.
WATERGUARD FLEXIBLE comprises of a single part acrylic polymer based flexible waterproofing coating, which contains special filler to ensure waterproofing. It also provides extremely tough decorative waterproof coating that allows to breath the surface.
WATERGUARD A SUPER is a prepacked two component powder and liquid polymer, consisting of processed cements and special fillers that can be applied over well prepared sound substrates to provide extremely tough durable waterproof rendering, 2-3 mm thickness for water tanks, basements etc.
WATERGUARD A - IMPROVED PERFORMANCE is used to all structures that are required to be waterproofed and protected against the ingress of moisture like Basements, Water tanks, Swimming Pools, Retaining Walls, Bridge Walls, Tunnels, Lift Shafts, Sewage Tanks, Reservoirs, Dams, Dock gates etc. WATERGUARD A - IMPROVED PERFORMANCE provides a tough and durable coating and it cannot be easily damaged or worn out.
DryWall Thermotek repels rain penetration and is scientifically proven to reduce heat loss in single skin masonry, with an energy saving of up to 29%. One single coat application is all it takes.
WATERGUARD LP is a two part polysulphide based waterproofing coating which provides a chemically resistant coating for walls, terrace, balconies, roof slabs, storage tanks and portable water tank. The cured film is extremely tough, flexible and has a smooth, hard, semi glossy surface with good slip resistant property. WATERGUARD LP has excellent adhesion property & ensures flexibility to take care of thermal expansion contraction.
Waterproofing describes making an object waterproof or water-resistant.
Building water-proofing is a process which is designed to prevent water from penetrating a building.
Usually extensive waterproofing measures are added to a building at the time of construction, to provide moisture control from the start
Waterproofing may also be done after a building is built, to address problems as they emerge or as part of a building retrofit
Internal areas that are waterproofed include :
bathrooms,
shower recesses,
laundries
toilets.
WATERGUARD BRICKSEAL is a single component, cementitious prepacked powder based on processed cements and special fillers that can be applied by brush to well prepared sound substrates to provide extremely tough durable waterproof coating of 1-2 mm thickness for brick masonry or plastered surface.
WATERGUARD PUD SPECIAL is water thinable, PUD (Polyurethane dispersion) based wall coating recommended for interior and exteriors concrete substrate.
The coating curing forms a tough elastomeric which offers the most advanced waterproofing technology and provides long term performance.
WATERGUARD PUD SPECIAL is water thinable, PUD (Polyurethane dispersion) based wall coating recommended for interior and exteriors concrete substrate.
The coating curing forms a tough elastomeric which offers the most advanced waterproofing technology and provides long term performance.
WATERGUARD EP is a two part, solvent free, epoxy resin based waterproofing coating for terrace, balconies, roof slabs & potable water tanks. The cured film is extremely tough & has a smooth, hard, semiglossy surface with good slip resistant property. WATERGUARD EP has excellent adhesion property & ensures flexibility to take care of thermal expansion contraction.
WATERGUARD EP is a two part, solvent free, epoxy resin based waterproofing coating for terrace, balconies, roof slabs & potable water tanks. The cured film is extremely tough & has a smooth, hard, semiglossy surface with good slip resistant property. WATERGUARD EP has excellent adhesion property & ensures flexibility to take care of thermal expansion contraction.
FLOWGROUT 60 (M) is a single pack, ultra high strength, free flowing, non-shrink grout. FLOWGROUT 60 (M) is a blend of specially processed cement and special fillers, free from corrosive substances and additives. FLOWGROUT 60 (M) is supplied as ready to use grout requiring addition of precise quantity of water at site (3.750 to 4 Litre/25 Kg Grout). FLOWGROUT 60 (M) is suitable for gap widths between 10mm - 50mm. For width less than 10mm FLOWGROUT 60 (M) resin grout can be used (see separate data sheet for more information) for thickness in excess of 50mm.
FLOWGROUT 60 (S) is based on specially processed cement containing fillers and additives. FLOWGROUT 60 (S) is supplied as ready to use grout requiring addition of precise quantity of water at site (3.750 to 4 Litre/25 Kg Grout). FLOWGROUT 60 (S) is suitable for gap widths of between 10mm - 50mm. For width less than 10mm FLOWGROUT 60 (S) can be used (see separate data sheet for more information) for thickness in excess fo 50mm. (say 75-100), cleaned washed 10mm aggregates can be incorporated at the rate of 50% - 100% of the quantity of grout used.
WATERGUARD C is a high build flexible, ready to use, waterproofing coating which contains special waterproofing filler to ensure waterproofing. It also provides extremely tough decorative waterproof coating, which allows to breathe the surface.
WATERGUARD C is a high build flexible, ready to use, waterproofing coating which contains special waterproofing filler to ensure waterproofing. It also provides extremely tough decorative waterproof coating, which allows to breathe the surface.
WATERGUARD S is a single pack colourless acrylic based waterproof coating which can be applied by brush or roller. Two coats of WATERGUARD S will ensure 80-100 micron film thickness. WATERGUARD S should be applied without any dilution. The product starts curing immediately on exposure to air due to the in-built catalyst and curing will completed within 24 hrs of application, WATERGUARD S gives a totally dry elastic film within 24 hrs. WATERGUARD S when used as recommended two coats to form an impermeable coating by blocking the capillaries and pores.
WATERGUARD VR is a single pack vapour resistance waterproof coating, specially designed polymer to ensure perfect water tightness and ensures the flexibility to cover thermal stresses. WATERGUARD VR has an excellent vage resistance & can be used on vertical and horizontal surfaces.
WATERGUARD BITUCOAT is dark low volatile petroleum residue modified by oxidation process with grade 85/25 conforming to IS:702. Besides being a water proof, elastic and adhesive, Waterguard Bitucoat ( 85/25 grade) is corrosion proof and acid alkali resistant. WATERGUARD BITUCOAT is highly resistant to aggressive soils and soluble salts providing an effective continuous barrier and protection against water bourne damage. WATERGUARD BITUCOAT is also ideally suited as a vapour/salt barrier to building facades behind granite, marble, stone cladding, and curtain wall elements.
WATERGUARD FLEXIBLE comprises of a single part acrylic polymer based flexible waterproofing coating, which contains special filler to ensure waterproofing. It also provides extremely tough decorative waterproof coating that allows to breath the surface.
WATERGUARD FLEXIBLE comprises of a single part acrylic polymer based flexible waterproofing coating, which contains special filler to ensure waterproofing. It also provides extremely tough decorative waterproof coating that allows to breath the surface.
WATERGUARD A SUPER is a prepacked two component powder and liquid polymer, consisting of processed cements and special fillers that can be applied over well prepared sound substrates to provide extremely tough durable waterproof rendering, 2-3 mm thickness for water tanks, basements etc.
WATERGUARD A - IMPROVED PERFORMANCE is used to all structures that are required to be waterproofed and protected against the ingress of moisture like Basements, Water tanks, Swimming Pools, Retaining Walls, Bridge Walls, Tunnels, Lift Shafts, Sewage Tanks, Reservoirs, Dams, Dock gates etc. WATERGUARD A - IMPROVED PERFORMANCE provides a tough and durable coating and it cannot be easily damaged or worn out.
DryWall Thermotek repels rain penetration and is scientifically proven to reduce heat loss in single skin masonry, with an energy saving of up to 29%. One single coat application is all it takes.
WATERGUARD LP is a two part polysulphide based waterproofing coating which provides a chemically resistant coating for walls, terrace, balconies, roof slabs, storage tanks and portable water tank. The cured film is extremely tough, flexible and has a smooth, hard, semi glossy surface with good slip resistant property. WATERGUARD LP has excellent adhesion property & ensures flexibility to take care of thermal expansion contraction.
Waterproofing describes making an object waterproof or water-resistant.
Building water-proofing is a process which is designed to prevent water from penetrating a building.
Usually extensive waterproofing measures are added to a building at the time of construction, to provide moisture control from the start
Waterproofing may also be done after a building is built, to address problems as they emerge or as part of a building retrofit
Internal areas that are waterproofed include :
bathrooms,
shower recesses,
laundries
toilets.
WATERGUARD BRICKSEAL is a single component, cementitious prepacked powder based on processed cements and special fillers that can be applied by brush to well prepared sound substrates to provide extremely tough durable waterproof coating of 1-2 mm thickness for brick masonry or plastered surface.
WATERGUARD PUD SPECIAL is water thinable, PUD (Polyurethane dispersion) based wall coating recommended for interior and exteriors concrete substrate.
The coating curing forms a tough elastomeric which offers the most advanced waterproofing technology and provides long term performance.
WATERGUARD PUD SPECIAL is water thinable, PUD (Polyurethane dispersion) based wall coating recommended for interior and exteriors concrete substrate.
The coating curing forms a tough elastomeric which offers the most advanced waterproofing technology and provides long term performance.
WATERGUARD EP is a two part, solvent free, epoxy resin based waterproofing coating for terrace, balconies, roof slabs & potable water tanks. The cured film is extremely tough & has a smooth, hard, semiglossy surface with good slip resistant property. WATERGUARD EP has excellent adhesion property & ensures flexibility to take care of thermal expansion contraction.
WATERGUARD EP is a two part, solvent free, epoxy resin based waterproofing coating for terrace, balconies, roof slabs & potable water tanks. The cured film is extremely tough & has a smooth, hard, semiglossy surface with good slip resistant property. WATERGUARD EP has excellent adhesion property & ensures flexibility to take care of thermal expansion contraction.
FLOWGROUT 60 (M) is a single pack, ultra high strength, free flowing, non-shrink grout. FLOWGROUT 60 (M) is a blend of specially processed cement and special fillers, free from corrosive substances and additives. FLOWGROUT 60 (M) is supplied as ready to use grout requiring addition of precise quantity of water at site (3.750 to 4 Litre/25 Kg Grout). FLOWGROUT 60 (M) is suitable for gap widths between 10mm - 50mm. For width less than 10mm FLOWGROUT 60 (M) resin grout can be used (see separate data sheet for more information) for thickness in excess of 50mm.
FLOWGROUT 60 (S) is based on specially processed cement containing fillers and additives. FLOWGROUT 60 (S) is supplied as ready to use grout requiring addition of precise quantity of water at site (3.750 to 4 Litre/25 Kg Grout). FLOWGROUT 60 (S) is suitable for gap widths of between 10mm - 50mm. For width less than 10mm FLOWGROUT 60 (S) can be used (see separate data sheet for more information) for thickness in excess fo 50mm. (say 75-100), cleaned washed 10mm aggregates can be incorporated at the rate of 50% - 100% of the quantity of grout used.
FLOWGROUT 60 is a single pack ready to use, ultra high strength, free flowing, non shrink grout. FLOWGROUT 60 is a blend of specially processed cement and special fillers, free from corrosive substances and additives. It confirming to BS:1881 Part-116, 1983, BS:4551, 1980 and ASTM C 469-83, ASTM C 940.
FLOWGROUT AG is a high strength, super flowing, large section cementitious grout. It is a blend of specially selected cement, silica, aggregates and additives, when mixed with water. It produces a consistent, reliable, non-shrink, ultra high strength large section grout.
FLOWGROUT AG complies to BS 6319 : Part-2 and ASTM C 157-93.
A Single pack ready to use, high strength, free flowing, non shrink grout. FLOWGROUT 40 is a blend of specially processed cement and special fillers, free from corrosive substances and additives. It confirming to BS : 1881 Part-116, 1983, BS : 4551 : 1980 and ASTM C 469-83, ASTM C 940.
FAIRGROUT is a two pack high strength, non-shrink polymer cementitious grout with both high early and ultimate strengths. FAIRGROUT has excellent flow properties and will not shrink after placing. FAIRGROUT is free from corrosive substances. FAIRGROUT is suitable for use in gap width of between 10-50 mm. In order to achieve optimum quality exposed FAIRGROUT and the outer surface of any shuttering should be protected from weather conditions for at least 12 hours. Sacks, matting, plastic sheets etc. should be placed as protection immediately after placing the grout.
FAIRADD is a plasticising, shrinkage compensating grout additive. FAIRADD is a single pack powdered admixture which when added to cement (cement : sand) produces an easy flow, high strength, shrinkage compensating grout. It is ideally suited for grouting and in-filling where a non-shrink, free-flowing product is required. FAIRADD imparts super-plasticising / high water reducing properties as well as positive expansion.
FAIRADD S is a combination of an expanding and plasticising agent. The expanding agent, generates gas during the hydration process before the initial set takes place, counteracts the natural settlement and shrinkage of the grout. The plasticising agent enables high workability mixes to be produced with relatively low water/cement ratio. Stability and cohesion of the grout is greatly increased. The expansion is controlled to avoid excess built up that is sufficient to provide high bonding of the grout to the contact surfaces with the absence of voids.
It confirming to BS 8110 Part-1 : 1985, Section 8.9.4.6.
FAIRADD CG is supplied as a dry powder requiring only the addition of a controlled amount of clean water and cement to produce a free flowing non shrink grout. FAIRADD CG is an all fines admixture containing expansive cement which impart controlled expansion in the plastic state whilst minimizing water demand. The material is designed to allow uniform mixing, and eliminates unwanted segregation and bleeding.
FAIRADD CG complies to BS 1881 : Part-116, 1983 and ASTM C 827-87, ASTM C 1107 Grade C.
ANCHORGROUT can be used for high strength corrosion resistant, anchoring of bolts and a permanent installation of reinforcement doweling and starter bars, foundation bolts, base plates, hand rails, safety fences, wall tiles, railway tracks, tie back anchors and grout for tower cranes.
Due to its thixotropic nature, ANCHORGROUT can be used in vertical, horizontal and overhead situations where the hole diameter exceeds the bar diameter by not less than 4 mm and not more than 25 mm.
Where it is necessary to obtain a quick high strength fixing into concrete, brick, masonry, block-work, rock or other material of sufficient strength to take the load required of the fixing. ANCHORFIX CAPSULE can be fixed into horizontal and vertical surfaces, or overhead.
FAIRSCREED R is used to repair spalled columns, soffits, gutters, lintels etc.
It is also used for repairing of damaged concrete floors, spalled concrete roads and runways.
Used to repair damaged concrete kerbs, pipes and precast units, as a bedding mortar for tiles on uneven floors or under corrosive conditions.
FAIRSCREED PR is the name given to a range of polyester based products which will fulfill many specialist applications in the jointing, patching and repair fields of the building and civil engineering industries.
The mixing of resin and hardener starts a polymerisation process resulting in excellent mechanical properties like high compressive strength, high flexural strength, high tensile strength, corrosion resistance of cured material. The unique hardner system in the FAIRSCREED PR range enables the mix to be varied from a pourable consistency to a trowelable mortar without significantly affecting the setting times or strengths achieved. Being polyester-based, selected grades of FAIRSCREED PR will harden and cure at temperatures down to freezing point.
This wide tolerance in use makes FAIRSCREED PR almost fullproof, and because part packs and extra aggregate can be used, the material is very economical.
FAIRSCREED FLOORPATCH is a fast curing, high strength, trowel applied, four component Methacrylate resin mortar, designed for rapid and permanent repairs to concrete and masonry surfaces.
FAIRMATE SILENT BREAK HSCA is a noncombustible and non-explosive material. It is safe and convenient in transportation, storage and operation. FAIRMATE SILENT BREAK HSCA is a silent demolition agent which does not cause any Vibration, noise, flying rocks, ash and hazardous gas during demolition. Demolition and cutting are allowed to be used according to working scheme. FAIRMATE SILENT BREAK HSCA can gain a high yield for mining of granite, marble etc. It is very easy to crush & remain reinforced concrete structures on demand during demolition.
FAIRMATE CARBON WRAP is based on new technology designed to completely guarantee the original structure's performance by increasing the strength, durability and vibration resistance. FAIRMATE CARBON WRAP is applied to deteriorated concrete areas on horizontally and vertically.
FAIRCRETE SBR is a single component white emulsion polymer specially designed for use as a bonding aid and for cementitious systems. It is resistant to hydrolysis and can therefore be used for external applications too.
FAIRCRETE SBR(S) is a single component white emulsion polymer specially designed for use as a bonding aid and for cementitious systems. It is resistant to hydrolysis and can therefore be used for external applications too.
FAIRCRETE FBR is a polymer specially formulated for use with cement formulation. It is design to improve the quality of site-batched cementitious mortars and slurries.
FAIRCRETE SB complies to BS 6319.
FAIRCRETE FBR is a polymer specially formulated for use with cement formulation. It is design to improve the quality of site-batched cementitious mortars and slurries.
Best steel industrial company LLC in UAEalafnanmetals
AL Afnan Steel Industrial Company LLC is a distinguished steel manufacturer and supplier, celebrated for its high-quality products and outstanding customer service. With a diverse portfolio that includes structural steel, and custom fabrications, AL Afnan meets a wide array of industrial demands. We are dedicated to using advanced technologies and sustainable methods to ensure excellence and reliability in every product, serving both local and international markets with efficiency.
Office Business Furnishings | Office EquipmentOFWD
OFWD is Edmonton’s Newest and most cost-effective source for Office Furnishings. Conveniently located on 170 street and 114 Avenue in Edmonton’s West End. We take pride in servicing a client base of over 500 corporations throughout the Edmonton and Alberta area. OFWD is in the business of satisfying the home or corporate office environment needs of our clients, from individual pieces of furniture for the home user to the implementation of complete turn-key projects on much larger scales. We supply only quality products from reputable manufacturers. It is our intention to continue to earn the trust of our clients by dealing with honesty and integrity and by providing service and after sales follow-up second to none.
Maximizing Efficiency with Integrated Water Management SystemsIrri Design Studio
Integrated water management systems are essential for improving irrigation design sustainability and efficiency. Irri Design Studio helps customers maximize water consumption, reduce waste, and encourage responsible stewardship of water resources by utilizing cutting-edge technology like drone-based construction updates and BIM modeling. The increasing issues of water shortage and environmental protection require an all-encompassing strategy to water management. Irrigation systems may be planned to optimize water consumption efficiency while guaranteeing the safety of people and the environment by putting new ideas and concepts into practice. Visit our website https://www.irridesignstudio.com/ for more information.
SMS2ORBIT | launched in 2022 in Mumbai's Andheri area, aims to be the most reliable Bulk SMS Service Provider in Mumbai.
If More Information About The SMS Service Provided By SMS2ORBIT Is Desired, Please Don’t Hesitate To Contact The Business Team. They Can Be Reached At
business@sms2orbit.com Or By Calling 97248 55877.
DOJO Training Center - Empowering Workforce ExcellenceHimanshu
The document delves into DOJO training, an immersive offline training concept designed to educate both new hires and existing staff. This method follows an organized eight-step process within a simulated work setting. The steps encompass safety protocols, behavioral coaching, product familiarity, production guidelines, and procedural understanding. Trainees acquire skills through hands-on simulations and rehearsal prior to transitioning to actual shop floor duties under supervision. The primary aim is to minimize accidents and defects by ensuring employees undergo comprehensive training, preparing them effectively for their job roles.
Elevate Your Brand with Digital Marketing for Fashion IndustryMatebiz Pvt. Ltd
Matebiz Pvt. Ltd. specializes in providing cutting-edge digital marketing for Fashion Industry. Our comprehensive strategies ensure that your brand stands out in the competitive fashion landscape. From targeted social media campaigns to search engine optimization tailored for fashion keywords, we cover it all. With a deep understanding of industry trends and consumer behavior, we craft compelling content and engaging visuals to enhance your online presence. Trust Matebiz Pvt. Ltd. to elevate your fashion brand through strategic digital marketing initiatives.
All Trophies at Trophy-World Malaysia | Custom Trophies & Plaques Supplier. Come to our Trophy Shop today and check out all our variety of Trophies available. We have the widest range of Trophies in Malaysia. Our team is always ready to greet your needs and discuss with you on your custom Trophy for your event. Rest assured, you will be with the best Trophy Supplier in Malaysia. The official Trophy Malaysia. Thank you for your support.
Experience the breathtaking beauty of a Waikiki sunset aboard the MAITAI Catamaran. Sail along the stunning coastline as the sun dips below the horizon, casting vibrant hues across the sky. Enjoy the gentle ocean breeze, refreshing drinks, and a relaxed atmosphere. This unforgettable voyage offers panoramic views of Diamond Head and the Waikiki skyline, making it the perfect way to end your day in paradise. Join us for a memorable sunset cruise you won't forget. Please visit our website: https://www.maitaicatamaran.net/ and call us at 808-922-5665 for additional information.
BEst VASHIKARAN SPECIALIST 9463629203 in UK Baba ji Love Marriage problem sol...gitapress3
TOP No AsTro 1 black magic SpecialiSt UK baba ji +91-9463629203 VashIkaRan blaCk maGiC specialist in uSA Uk England Luxembourg CanAdA America BEst VASHIKARAN SPECIALIST 9463629203 in UK Baba ji Love Marriage problem solution Uk USA america england LonDon Divorce problem solution astroloGer
Unlocking Insights: AI-powered Enhanced Due Diligence Strategies for Increase...RNayak3
Explore how a risk-based approach to Enhanced Due Diligence can deliver effective Anti-Money Laundering (AML) compliance and monitoring in banking and financial services.
BesT panDit Ji LoVe problem solution 9463629203 UK uSA California New Zealand...gitapress3
love problem solution astrologer
best love problem solution astrologer
online love problem solution astrologer
love problem solution astrologer in india
love problem solution astrologer in kolkata
love problem solution astrologer near me
love problem solution astrologer in ludhiana
love problem solution astrologer acharya ji
love problem solution astrologer in delhi
love problem solution astrologer amritsar
astrologer love problem solution
astrologer for love problem
astrology love problem solution
love solution astrologer
love problem solution specialist astrologer
love problem solution by astrologer
astrology love problem solution baba ji
love problem solve astrologer
love problem solution usa
love problem solution expert astrologer
astrologer for love marriage problem solution
love problem solution astrologer in mumbai
love problem solution muslim astrologer
love marriage specialist astrologer problem solution
famous love astrologer
love problem solution astrologer specialist
love problem solution astrologer tantrikBesT panDit Ji LoVe problem solution 9463629203 UK uSA California New Zealand baba ji LoVe marriage specialist Uk USA LonDOn panDit ji
In the competitive realm of online business, visibility is key, and search engine optimization (SEO) serves as the cornerstone of digital prominence. As the demand for effective SEO solutions continues to soar, finding the best SEO company in Perth becomes imperative. Enter Simba Squad – a dynamic force dedicated to propelling your business to new heights of success.
Delightful Finds: Unveiling the Power of Gifts Under 100JoyTree Global
Stretch your budget and spread joy! This guide explores the world of gifts under 100, proving thoughtful gestures don't require a hefty price tag. Discover unique and practical options for birthdays, holidays, or simply showing someone you care. Find inspiration for every occasion within your budget!
Are Gutters Necessary? Explore the details now!AmeliaLauren3
Gutters are typically installed at a slight downward slope to allow water to flow freely towards downspouts or drains – the downspout being the vertical pipe attached to the gutters. The water is subsequently transported by the downspout to either the ground or an underground drainage system. Maintaining a gutter system that is free of blockages and functional requires regular maintenance.
But, many wonder in what situations gutters are required and not required. In this ppt we will discuss in detail the matter, ‘Are Gutters Necessary?’
The Jamstack Revolution: Building Dynamic Websites with Static Site Generator...Softradix Technologies
In this infographic, the Jamstack architecture emphasizes pre-rendered content and decoupling the frontend from the backend. It leverages static site generators (SSGs) to create fast-loading HTML files and APIs for dynamic functionality. Benefits include improved performance, enhanced security, scalability, and ease of deployment. Real-world examples include Netlify, Gatsby, and Contentful. https://softradix.com/web-development/
Learn about Inspect Edge, the leading platform for efficient inspections, featuring the advanced NSPIRE Inspection Application for seamless property assessments. Discover how the NSPIRE Inspection Application by Inspect Edge revolutionizes property inspections with advanced features and seamless integration.
Best Catering Event Planner Miso-Hungry.pptxMiso Hungry
Miso-Hungry, led by Executive Chef Emilio Molina, is Islamorada's premier catering event planner. We specialize in sustainable, farm-fresh cuisine, using local ingredients to create unforgettable dishes. As a FollowTheFoodHMI branded company, we bring our culinary expertise across the U.S., connecting communities through exceptional food and personalized event planning. Let us showcase our family's passion and make your event extraordinary.
Islamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxamilabibi1
Islamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docx
2. Benefits
Ready to use.
Available in various colours.
Can be applied on vertical & horizontal surfaces.
Colours are stable.
Gives insulation properties.
Abrasion resistant.
Allows the surface to breathe.
Flexible.
Cost effective.
Easy to apply.
Excellent watertightness.
Thermal barrier that can enhance building climatic conditions.
Temperature reduction from 8% to 20%, protect against wind and rain.
Durable - high UV resistance.
3. Uses
WATERGUARD COOL COOL is used for waterproofing and protection in
all types of foundations, toilets, sunken slab, sub-soil structure, septic tank,
basement. WATERGUARD COOL COOL is applied on the following
substrates, concrete, Asbestos sheet, Waterproof and roofing materials.
4. Description
WATERGUARD COOL COOL is a high build flexible, elastomeric aqueous
based waterproofing coating. containing special polymer and fillers.
WATERGUARD COOL COOL provides extremely long lasting protective
coating that creates a thermal barrier which stands severe temperature and
changes and provides long lasting protection against wind and rain. It
protects concrete against attack from atmospheric carbon dioxide, airborne,
chlorides, acid, rain, weathering etc. WATERGUARD COOL COOL is a
ready to use, ensuring waterproofing. It also provides extremely tough
decorative waterproof coating, which allows breathing the surface.
5. Properties
Surface finish : Matt
Application Temperature : 3ºC to 40ºC
Dry Time : 30 minutes
Colour : 400 shades as per our shade card
Insulation : Two coats of WATERGUARD COOL
COOL will ensure 8ºC to 10 ºC less
temperature.
Over coating time : 3-4 hours
6. Packing & Coverage
WATERGUARD COOL COOL is supplied in 1, 5, 20 kgs. It has a coverage
of 4-5 m²/kg/two coats (200 microns WFT). Coverage of WATERGUARD
COOL COOL depends on the surface.
7. Packing & Coverage
WATERGUARD COOL COOL is supplied in 1, 5, 20 kgs. It has a coverage
of 4-5 m²/kg/two coats (200 microns WFT). Coverage of WATERGUARD
COOL COOL depends on the surface.