Pepperl+Fuchs is the world’s leading manufacturer of intrinsically safe explosion protection and electronic sensors, supplying a wide range of products and solutions for use in hazardous areas and harsh environment applications.
Pepperl+Fuchs have over 60 years of experience as a global supplier to a wide range of industries and applications. All products are certified to a variety of international standards including the latest ATEX and IECEX guidelines, being ideally suited to a variety of applications from oil platforms to pharmaceutical plants and everything else in between.
The Walsall branded Pepperl+Fuchs hazardous area installation products are based around high quality enclosures in the increased safety, intrinsic safety and flameproof protection classes. The range provides several different options of enclosure dependant upon the project application and specification required, with a variety of sizes and materials available including stainless and mild steel, as well as glass reinforced polyester (GRP). In addition, the product range also include a wide range of lighting, signalling and emergency shutdown alarm equipment, as well as various installation accessories.
Explosion proof lighting for hazardous areas.
Walsall manufacture a wide range of luminaires for use in hazardous areas where potentially explosive gas & dust may exist. Our lighting products are explosion protected also with high levels of ingress protection.
Our range of products includes those with certification in accordance with International (IEC Ex), European (ATEX) & Russian (GOST R) standards.. Ranges include Ex de Wellglasses, Ex de Floodlights, Ex n Floodlights, Ex d fluorescents, Ex d bulkheads, Ex de fluorescents, Handlamps & inspection lighting. Zone 1 & Zone 2 lighting is a core competency of Walsall.
Caterpillar cat 432 d backhoe loader (prefix bld) service repair manual (bld0...fujsjefskekm
This document provides instructions for disassembling the transmission of a 432D Backhoe Loader. It lists the required tools and begins by having the transmission removed per the specified procedure. The transmission is then disassembled into its major components which are further disassembled. Steps include removing the output shafts, bearings, gears, seals, springs and other internal parts. Precautions are given for cleaning parts and containing fluids during disassembly.
This document summarizes different types of fans and blowers used to move air or gas. It describes axial and centrifugal fans that move air parallel or perpendicular to the fan shaft. Common fan applications include ventilation, cooling towers, and industrial processes. The document also covers blower types, compression equations, efficiency calculations, performance relationships, and laws governing how fan characteristics change with speed, size, and density.
Siemens Water Technologies is a single source provider of laboratory water purification systems. They offer a wide range of water purification systems including point-of-use and central systems. This includes the Axius Direct system which can produce Type I ultrapure water and Type II pure water directly from unpurified tap water. The document provides specifications for the Axius Direct system and lists other water purification products and services offered by Siemens such as the PURELAB Option-Q system, central distribution systems, storage reservoirs, and accessories.
This document is a piping and instrumentation diagram (P&ID) for a solvent extraction filtration system. It shows the piping and instrumentation for tanks, pumps, filters and other equipment involved in the pls filtration process. Lines are labeled with identifiers for the piping and instrumentation they connect. Notes provide general information and references to other drawings.
The document contains questions about error analysis and types of errors in experimental measurements. It asks about systematic errors, random errors, and mistakes. Systematic errors are errors that are consistently in the same direction due to issues like faulty instruments. Random errors are due to natural fluctuations and cannot be predicted. The document also contains questions about sampling methods, including probability and non-probability sampling. It asks about simple random sampling, stratified sampling, cluster sampling, and other techniques.
This diagnostic manual provides information on troubleshooting and repairing various components of CLAAS Arion 650-620 and 550-530 agricultural machines, organized by component group and numbered identification code. The document includes an introduction and overview of the CLAAS Component Number (CCN) system used to identify parts. CCNs utilize letters and numbers to classify electrical, hydraulic, and other system components by function to aid technicians in maintenance and repairs. Tables list the various CCN groups and sub-groups. The bulk of the manual then lists technical specifications and troubleshooting steps for engine, transmission, chassis, and other systems of the machines.
Caterpillar cat 432 d backhoe loader (prefix bld) service repair manual (bld0...fujsjefskekm
This document provides instructions for disassembling the transmission of a 432D Backhoe Loader. It lists the required tools and begins by having the transmission removed per the specified procedure. The transmission is then disassembled into its major components which are further disassembled. Steps include removing the output shafts, bearings, gears, seals, springs and other internal parts. Precautions are given for cleaning parts and containing fluids during disassembly.
This document summarizes different types of fans and blowers used to move air or gas. It describes axial and centrifugal fans that move air parallel or perpendicular to the fan shaft. Common fan applications include ventilation, cooling towers, and industrial processes. The document also covers blower types, compression equations, efficiency calculations, performance relationships, and laws governing how fan characteristics change with speed, size, and density.
Siemens Water Technologies is a single source provider of laboratory water purification systems. They offer a wide range of water purification systems including point-of-use and central systems. This includes the Axius Direct system which can produce Type I ultrapure water and Type II pure water directly from unpurified tap water. The document provides specifications for the Axius Direct system and lists other water purification products and services offered by Siemens such as the PURELAB Option-Q system, central distribution systems, storage reservoirs, and accessories.
This document is a piping and instrumentation diagram (P&ID) for a solvent extraction filtration system. It shows the piping and instrumentation for tanks, pumps, filters and other equipment involved in the pls filtration process. Lines are labeled with identifiers for the piping and instrumentation they connect. Notes provide general information and references to other drawings.
The document contains questions about error analysis and types of errors in experimental measurements. It asks about systematic errors, random errors, and mistakes. Systematic errors are errors that are consistently in the same direction due to issues like faulty instruments. Random errors are due to natural fluctuations and cannot be predicted. The document also contains questions about sampling methods, including probability and non-probability sampling. It asks about simple random sampling, stratified sampling, cluster sampling, and other techniques.
This diagnostic manual provides information on troubleshooting and repairing various components of CLAAS Arion 650-620 and 550-530 agricultural machines, organized by component group and numbered identification code. The document includes an introduction and overview of the CLAAS Component Number (CCN) system used to identify parts. CCNs utilize letters and numbers to classify electrical, hydraulic, and other system components by function to aid technicians in maintenance and repairs. Tables list the various CCN groups and sub-groups. The bulk of the manual then lists technical specifications and troubleshooting steps for engine, transmission, chassis, and other systems of the machines.
Management System 3.1 (Open Source Reference Model). An open source management system developed by management practitioners with coaching and support of former Toyota managers.
Elemental analysis does not just start by inserting the sample into the combustion tube! Sample preparation is an essential part of elemental analysis and influences analysis results directly. This webinar addresses all users of elemental analysis and communicates important basics of sample preparation – from homogenization of the sample to wrapping it.
Manual de bombas hidráulicas seções 1.3.4 e 1.3.5Grundfos Brasil
Este documento apresenta um manual técnico sobre bombas. Ele começa descrevendo os principais tipos de bombas centrífugas, como sua construção, características e curvas de desempenho. Também apresenta os diferentes tipos de bombas de acordo com sua aplicação e construção, como bombas padrão, bi-partidas, hermeticamente seladas, sanitárias, de efluentes, imersíveis e submersas. Por fim, discute aspectos importantes como materiais, motores, vedações de eixos, sistemas hidráulicos e
Thermal power plants produce various air, water, and solid pollutants that harm both the environment and human health. The main air pollutants are SO2, NOx, CO2, and particulate matter which can cause respiratory issues. Water used for cooling is discharged at high temperatures, reducing oxygen levels and disturbing ecosystems. Ash and other wastes contaminate water and soil. Various methods can control these pollutants, such as scrubbers for SO2 removal, low-temperature combustion to reduce NOx, and wastewater treatment before discharge. If uncontrolled, pollution from thermal plants poses serious risks.
Everpure Catalogo De Pentair FoodserviceFilterPure
Este documento es un catálogo de productos de filtración de agua de la marca Everpure para la industria de servicios alimenticios. Presenta una variedad de sistemas de filtración para aplicaciones como café, espresso, máquinas de bebidas, hielo, vapor y agua potable. Los sistemas de Everpure ofrecen uniformidad, seguridad y satisfacción al eliminar contaminantes indeseables del agua. El agua afecta la satisfacción del cliente y las ganancias de un negocio, por lo que la filtración adec
The document discusses impressed current cathodic protection systems which use an external DC power source to provide corrosion protection for large structures like pipelines and storage tanks. It describes the system components including anodes, cables, rectifiers and how they work together. Factors that influence design include current requirements, soil resistivity testing and anode placement. Graphs show representative resistance values for different anode types.
O documento descreve conceitos sobre classificação de áreas em locais com risco de explosão, incluindo definições de zonas 0, 1 e 2, tipos de proteção de equipamentos elétricos e grupos de gases. Também apresenta tabelas comparando a classificação brasileira e internacional com a americana.
We have made a wide standard of Test Probes devices to provide the best solution for in accordance with the requirements. Visit our site http://equip-test.com to get to know more about it.
A slide presentation from Bryan Evans presented at the April 8, 2013 NACE/Pipeliners Joint Meeting in Atlanta, GA. The presentation dealt with the phenomenon of AC electricity running through high voltage lines potentially corroding nearby underground pipelines--and how to mitigate potential problems.
Este documento fornece especificações técnicas de uma série de rolamentos radiais de esferas da série UCR-200, incluindo seu diâmetro nominal, dimensões, capacidade de carga dinâmica e estática e RPM máxima. Os rolamentos variam em tamanho de 20 a 100 mm de diâmetro e são projetados para suportar cargas de 5,7 a 126 kgf e rodar a até 11.000 RPM.
Corrosion is the deterioration of materials, especially metals, due to chemical reactions with their environment. It can have significant economic and safety impacts by reducing strength, causing equipment downtime, and failures. Various examples are given that illustrate how corrosion is influenced by factors like flow, different materials in contact, exposure to water and salts, and stresses in materials. Proper design and use of protective coatings and materials is needed to prevent corrosion from occurring.
The YHC5150X is a simple, user friendly HART® communicator that allows all HART® field devices to be configured, polled, and trimmed utilizing a Windows Embedded CETM based system for faster processing and greater storage capacity.
The YHC5150X is a full function, DD Direct, HART® Communicator supporting Universal, Common Practice and Device Specific commands for commissioning, configuration, and maintenance operations.
This document discusses corrosion in cooling water systems. It outlines the corrosion process and the elements required for corrosion to occur. The rate and type of corrosion are determined by factors at the cathode and anode. Various types of corrosion in cooling water systems are described, including general etch, concentration cell corrosion, cracking, and mechanical damage. Finally, general methods for corrosion inhibition are presented, such as using corrosion resistant materials, coatings, cathodic protection, water chemistry adjustments, and corrosion inhibitors.
This document discusses cooling water problems such as corrosion, scale, fouling, and microbiological contamination. It explains the causes and factors that influence these problems, as well as methods to control and prevent each problem. Key topics covered include the corrosion process, scale formation mechanisms, types of fouling, factors influencing microbial growth, and chemical treatment options for control and prevention.
Vasthi Engineers are most popular Manufacturing industries in india. we are Supplying Dew Point Meters, Gas Analyzers and Gas Detectors for customer world wide.
For more details visit->http://www.vasthi.com/gas-analyzers/
New holland t4.75 lp tractor service repair manualfjsjekkdmmemm
This document is a service manual for various tractor models including the T4.75F, T4.85F, T4.95F, and T4.105F. It contains over 50 sections covering all major tractor systems from the engine and transmission to hydraulics, steering, electrical systems, and more. Each section provides information on components, operation, and repair/service procedures for the various subsystems that comprise the tractors.
Gigaset SL910A Digital Cordless Telephone User GuideTelephones Online
This document is the user guide for the Gigaset SL910/SL910A cordless phone. It contains instructions on setting up the base station and charger cradle, operating the phone's touchscreen and keys, making calls, changing settings, using the phone's apps and features, and connecting additional handsets or Bluetooth devices. It also provides customer service contact information and safety precautions.
Power flex series 750 installation instructionKhoi Nguyen
This document provides installation instructions for PowerFlex 750-Series AC drives in 5 basic steps: 1) Read general precautions, 2) Prepare for installation, 3) Lift and mount the drive, 4) Connect power wiring, and 5) Connect motor and I/O wiring. It includes information on safety, specifications, clearances, mounting, wiring, and references additional Rockwell Automation resources for more detailed information. The instructions are available in multiple languages on Rockwell Automation's website.
Hella 2014 Product Overview Caravans and MotorhomesRimsky Cheng
This document provides an overview of lighting and electronic products from Hella for caravans and motorhomes. It discusses Hella's offerings for front, side, rear, and interior lighting as well as electronic components. The company aims to provide high quality, innovative, and sustainable lighting solutions that improve safety and efficiency while meeting industry standards.
The document discusses Carlon's Circuit Safe NEMA enclosures product line. It provides details on the different styles of enclosures including screw-on cover, external hinge cover, and hidden hinge cover. It lists the various sizes available, materials used, certifications and standards met, as well as applications and benefits of the enclosures. Installation accessories are also mentioned.
This document provides an overview and specifications for Thomson's profile rail linear guides, including the 500 Series ball profile rail, 500 Series roller profile rail, 400 Series profile rail, AccuMini, MicroGuide, and T-Series guides. It describes the product lines, part numbering systems, datasheets, options and accessories, accuracy and preload information for each profile rail series. The document is intended to help users identify the optimal Thomson linear motion solution for their application.
Management System 3.1 (Open Source Reference Model). An open source management system developed by management practitioners with coaching and support of former Toyota managers.
Elemental analysis does not just start by inserting the sample into the combustion tube! Sample preparation is an essential part of elemental analysis and influences analysis results directly. This webinar addresses all users of elemental analysis and communicates important basics of sample preparation – from homogenization of the sample to wrapping it.
Manual de bombas hidráulicas seções 1.3.4 e 1.3.5Grundfos Brasil
Este documento apresenta um manual técnico sobre bombas. Ele começa descrevendo os principais tipos de bombas centrífugas, como sua construção, características e curvas de desempenho. Também apresenta os diferentes tipos de bombas de acordo com sua aplicação e construção, como bombas padrão, bi-partidas, hermeticamente seladas, sanitárias, de efluentes, imersíveis e submersas. Por fim, discute aspectos importantes como materiais, motores, vedações de eixos, sistemas hidráulicos e
Thermal power plants produce various air, water, and solid pollutants that harm both the environment and human health. The main air pollutants are SO2, NOx, CO2, and particulate matter which can cause respiratory issues. Water used for cooling is discharged at high temperatures, reducing oxygen levels and disturbing ecosystems. Ash and other wastes contaminate water and soil. Various methods can control these pollutants, such as scrubbers for SO2 removal, low-temperature combustion to reduce NOx, and wastewater treatment before discharge. If uncontrolled, pollution from thermal plants poses serious risks.
Everpure Catalogo De Pentair FoodserviceFilterPure
Este documento es un catálogo de productos de filtración de agua de la marca Everpure para la industria de servicios alimenticios. Presenta una variedad de sistemas de filtración para aplicaciones como café, espresso, máquinas de bebidas, hielo, vapor y agua potable. Los sistemas de Everpure ofrecen uniformidad, seguridad y satisfacción al eliminar contaminantes indeseables del agua. El agua afecta la satisfacción del cliente y las ganancias de un negocio, por lo que la filtración adec
The document discusses impressed current cathodic protection systems which use an external DC power source to provide corrosion protection for large structures like pipelines and storage tanks. It describes the system components including anodes, cables, rectifiers and how they work together. Factors that influence design include current requirements, soil resistivity testing and anode placement. Graphs show representative resistance values for different anode types.
O documento descreve conceitos sobre classificação de áreas em locais com risco de explosão, incluindo definições de zonas 0, 1 e 2, tipos de proteção de equipamentos elétricos e grupos de gases. Também apresenta tabelas comparando a classificação brasileira e internacional com a americana.
We have made a wide standard of Test Probes devices to provide the best solution for in accordance with the requirements. Visit our site http://equip-test.com to get to know more about it.
A slide presentation from Bryan Evans presented at the April 8, 2013 NACE/Pipeliners Joint Meeting in Atlanta, GA. The presentation dealt with the phenomenon of AC electricity running through high voltage lines potentially corroding nearby underground pipelines--and how to mitigate potential problems.
Este documento fornece especificações técnicas de uma série de rolamentos radiais de esferas da série UCR-200, incluindo seu diâmetro nominal, dimensões, capacidade de carga dinâmica e estática e RPM máxima. Os rolamentos variam em tamanho de 20 a 100 mm de diâmetro e são projetados para suportar cargas de 5,7 a 126 kgf e rodar a até 11.000 RPM.
Corrosion is the deterioration of materials, especially metals, due to chemical reactions with their environment. It can have significant economic and safety impacts by reducing strength, causing equipment downtime, and failures. Various examples are given that illustrate how corrosion is influenced by factors like flow, different materials in contact, exposure to water and salts, and stresses in materials. Proper design and use of protective coatings and materials is needed to prevent corrosion from occurring.
The YHC5150X is a simple, user friendly HART® communicator that allows all HART® field devices to be configured, polled, and trimmed utilizing a Windows Embedded CETM based system for faster processing and greater storage capacity.
The YHC5150X is a full function, DD Direct, HART® Communicator supporting Universal, Common Practice and Device Specific commands for commissioning, configuration, and maintenance operations.
This document discusses corrosion in cooling water systems. It outlines the corrosion process and the elements required for corrosion to occur. The rate and type of corrosion are determined by factors at the cathode and anode. Various types of corrosion in cooling water systems are described, including general etch, concentration cell corrosion, cracking, and mechanical damage. Finally, general methods for corrosion inhibition are presented, such as using corrosion resistant materials, coatings, cathodic protection, water chemistry adjustments, and corrosion inhibitors.
This document discusses cooling water problems such as corrosion, scale, fouling, and microbiological contamination. It explains the causes and factors that influence these problems, as well as methods to control and prevent each problem. Key topics covered include the corrosion process, scale formation mechanisms, types of fouling, factors influencing microbial growth, and chemical treatment options for control and prevention.
Vasthi Engineers are most popular Manufacturing industries in india. we are Supplying Dew Point Meters, Gas Analyzers and Gas Detectors for customer world wide.
For more details visit->http://www.vasthi.com/gas-analyzers/
New holland t4.75 lp tractor service repair manualfjsjekkdmmemm
This document is a service manual for various tractor models including the T4.75F, T4.85F, T4.95F, and T4.105F. It contains over 50 sections covering all major tractor systems from the engine and transmission to hydraulics, steering, electrical systems, and more. Each section provides information on components, operation, and repair/service procedures for the various subsystems that comprise the tractors.
Gigaset SL910A Digital Cordless Telephone User GuideTelephones Online
This document is the user guide for the Gigaset SL910/SL910A cordless phone. It contains instructions on setting up the base station and charger cradle, operating the phone's touchscreen and keys, making calls, changing settings, using the phone's apps and features, and connecting additional handsets or Bluetooth devices. It also provides customer service contact information and safety precautions.
Power flex series 750 installation instructionKhoi Nguyen
This document provides installation instructions for PowerFlex 750-Series AC drives in 5 basic steps: 1) Read general precautions, 2) Prepare for installation, 3) Lift and mount the drive, 4) Connect power wiring, and 5) Connect motor and I/O wiring. It includes information on safety, specifications, clearances, mounting, wiring, and references additional Rockwell Automation resources for more detailed information. The instructions are available in multiple languages on Rockwell Automation's website.
Hella 2014 Product Overview Caravans and MotorhomesRimsky Cheng
This document provides an overview of lighting and electronic products from Hella for caravans and motorhomes. It discusses Hella's offerings for front, side, rear, and interior lighting as well as electronic components. The company aims to provide high quality, innovative, and sustainable lighting solutions that improve safety and efficiency while meeting industry standards.
The document discusses Carlon's Circuit Safe NEMA enclosures product line. It provides details on the different styles of enclosures including screw-on cover, external hinge cover, and hidden hinge cover. It lists the various sizes available, materials used, certifications and standards met, as well as applications and benefits of the enclosures. Installation accessories are also mentioned.
This document provides an overview and specifications for Thomson's profile rail linear guides, including the 500 Series ball profile rail, 500 Series roller profile rail, 400 Series profile rail, AccuMini, MicroGuide, and T-Series guides. It describes the product lines, part numbering systems, datasheets, options and accessories, accuracy and preload information for each profile rail series. The document is intended to help users identify the optimal Thomson linear motion solution for their application.
This document provides an overview and specifications for Thomson's profile rail linear guides, including the 500 Series ball profile rail, 500 Series roller profile rail, 400 Series profile rail, AccuMini, MicroGuide, and T-Series. It describes the product lines, part numbering systems, datasheets, options and accessories, accuracy and preload information for each profile rail series. The document is intended to help users identify the optimal Thomson linear motion solution for their application.
This document is a catalogue for duct systems and related products produced by Emtelle UK Limited. It includes sections covering telecom duct systems, power duct systems, building products, CCTV and street lighting products, and appendices. Contact information and terms and conditions are provided at the end. The document provides an overview and specifications for Emtelle's various ducting, cabling, and ancillary products.
This document provides a table of contents for a catalog that showcases various optics, accessories, gear, and other products from Leapers, including scopes, red dot sights, mounts, bipods, stocks, magazines, lights, tools, and cases. The table of contents lists each product section or category and the page numbers associated with them. Some highlighted new products are also called out.
This document provides an operation manual for the SYSMAC CS Series CS1D Duplex System, which includes:
1. CS1D-CPU@@H CPU Units, CS1D-DPL01 Duplex Unit, and CS1D-PA/PD@@@ Power Supply Unit.
2. The system allows for duplex operation to improve reliability through redundant processing and power supply units.
3. The document covers specifications, configuration, installation, wiring, programming, and operation of the CS1D Duplex System components.
Lista provides today’s most complete selection of workbenches, cabinets, workspace furniture, accessories, and more. We help you create work environments that:
• Improve productivity
• Benefit the user through smart ergonomic design
• Offer unmatched flexibility
• Are attractive and comfortable
The result of high-quality construction, and innovative engineering and design, Lista products are built to provide functionality, flexibility, and ease of use in the most demanding working environments.
Visit our website to order your Lista product - https://listacabinets.com
Here, at the Trailer Parts Superstore, we often get calls from frustrated customers who have found out that their trailer has been outfitted with a suspension salvaged from a mobile home transport. A little history: when mobile homes were first being introduced, some of the builders asked the Dexter Axle Co. to develop a low cost suspension system for limited use only for the transport of the mobile homes of the day. Dexter developed a suspension that was accepted and was in wide use during the heyday of the mobile home. This system was not approved by DOT, but approved by HUD (Housing and Urban Development). It was called the MHA (Mobile Home Axle) and was supposed to be disposable. Unfortunately, opportunists would salvage these suspensions and re-use them on old trailers and even new trailers.
Here, at the Trailer Parts Superstore, we often get calls from frustrated customers who have found out that their trailer has been outfitted with a suspension salvaged from a mobile home transport. A little history: when mobile homes were first being introduced, some of the builders asked the Dexter Axle Co. to develop a low cost suspension system for limited use only for the transport of the mobile homes of the day. Dexter developed a suspension that was accepted and was in wide use during the heyday of the mobile home. This system was not approved by DOT, but approved by HUD (Housing and Urban Development). It was called the MHA (Mobile Home Axle) and was supposed to be disposable. Unfortunately, opportunists would salvage these suspensions and re-use them on old trailers and even new trailers.
This suspension consisted of an axle with drum brakes and springs. Even though the axle could be rated at 6000lb, the spindle, bearings and hub de-rated it to 4500 lb. The brake assembly backing plates were welded to the spindle and they could be rebuilt but not replaced. Brake rebuild parts can still be ordered directly from Dexter. The springs were a low quality mono-leaf and can be replaced with a 25.25” double eye leaf spring.
This document provides an introduction and overview of clutches and brakes from Thomson. It includes:
- Descriptions of the operation and design principles of wrap spring and friction clutches and brakes.
- Selection charts to help users choose the appropriate product based on the required motion type or capability.
- Product listings and specifications for a range of wrap spring clutches/brake packages and engineered friction clutches and brakes.
- Guidelines for selecting, applying, and servicing Thomson clutches and brakes.
Thomson is a leading provider of linear motion technologies including clutches and brakes. The document discusses Thomson's broad portfolio of standard and custom mechanical motion solutions, and their ability to help customers identify optimal solutions balancing performance, life, and cost. It encourages contacting Thomson early in the design process to leverage their application experience and integrated control and motion technologies.
Blackburns Metals is a leading UK supplier of aluminium, stainless steel, and thermoplastic sheet products. It has a reputation for high quality products and innovative supply solutions. Blackburns has a large central facility with over 10,000 tonnes of material available daily to its nationwide network of service centers. It offers fabrication capabilities to supply materials closer to final form, providing a one-stop shop for customers.
Case ih farmall 45 tractor service repair manualjjskefkskemik
This document is a repair manual for Case IH Farmall 40, 45, and 50 tractors. It contains sections covering the engine, transmission, axles, brakes, hydraulics, steering, climate control, electrical systems, and platform. Safety precautions are provided regarding servicing and operating the tractors. Technical information includes specifications, dimensions, torque values, recommended fluids, and adjustments. Safety decals and their placements on the tractors are also defined.
Case ih farmall 50 tractor service repair manualjjskefkskemik
This document is a repair manual for Case IH Farmall 40, 45, and 50 tractors. It contains sections covering the engine, transmission, axles, brakes, hydraulics, steering, climate control, electrical systems, and platform. Safety precautions are provided regarding servicing and operating the tractors. Technical information includes specifications, dimensions, torque values, recommended fluids, and adjustments. Safety decals and their placements on the tractors are also defined.
Case ih farmall 40 tractor service repair manualfjsjekksemm
This document is a repair manual for Case IH Farmall 40, 45, and 50 tractors. It contains sections covering the engine, transmission, axles, brakes, hydraulics, steering, climate control, electrical systems, and platform. Safety precautions are provided regarding servicing and operating the tractors. Technical information includes specifications, dimensions, torque values, recommended fluids, and adjustments. Safety decals and their placements on the tractors are also defined.
Case ih farmall 40 tractor service repair manualfjskekmsemmwe
This document is a repair manual for Case IH Farmall 40, 45, and 50 tractors. It contains sections covering the engine, transmission, axles, brakes, hydraulics, steering, climate control, electrical systems, and platform. Safety information is provided, including precautions regarding servicing the tractor, operating it, and driving safely. Technical information such as specifications, dimensions, torque values, special tools, and recommended lubricants are also included.
Similar to Walsall - Hazardous Area Electrical & Explosion Proof Electrical Equipment (20)
Isolation Procedures for Safe Working on Electrical Systems and Equipment by the JIB | solation Procedures for Safe Working on Electrical Systems and Equipment
This chart shows the safe isolation procedure that you should use when working on electrical systems and equipment.
You'll receive a printed copy of this from your Training Provider, but it's also here as a handy reference to keep electronically.
THE RULES OF SAFE ISOLATION ARE:
Obtain permission to start work (a Permit may be required in some situations)
Identify the source(s) of supply using an approved voltage indicator or test lamp
Prove that the approved voltage indicator or test lamp is functioning correctly
Isolate the supply(s)
Secure the isolation
Prove the system/equipment is DEAD using an approved voltage indicator or test lamp
Prove that the approved voltage indicator or test lamp is functioning correctly
Put up warning signs to tell other people that the electrical installation has been isolated
Once the system/equipment is proved DEAD, work can begin
Uploaded by THORNE & DERRICK LV HV Jointing, Earthing, Substation & Electrical Eqpt | Explosive Atmosphere Experts & ATEX IECEx.
Thorne & Derrick International are specialist distributors of low, medium, and high voltage cable installation, jointing, substation, and electrical equipment. They have over 30 years of experience and stock over 100,000 products from over 100 brands. Their product range includes cable joints, terminations, tools, accessories, distribution equipment, and safety products for voltages up to 132kV.
The document advertises the Children North East Annual Golf Day fundraising event to be held on May 9th, 2018 at Close House golf course in Northumberland. The event will include a shotgun start at 2pm for teams of four playing in a Stableford scoring competition. The £490 entry fee per team includes breakfast, a two course meal after play, and goodie bags. Proceeds will benefit Children North East, a charity supporting children in the Newcastle region.
This document provides information on 3M's electrical products, including electrical connectors, wire connectors, splice kits, wire markers, and protective coatings. It highlights key features and applications of 3M's Scotchlok electrical insulation displacement connectors, Performance Plus wire connectors, direct bury splice kits, ScotchCode wire markers, insulating and anti-corrosion sprays, and Scotchkote electrical coating. The document is intended to showcase 3M's quality solutions for electrical connections, identification, and corrosion protection.
This document provides a catalogue of products from SICAME GROUP for electrical safety. It begins by emphasizing the importance of electrical safety for professionals working in the electrical industry. The catalogue then outlines the company's commitment to supporting customers through new products designed by their teams, an updated catalogue focusing on product functions and uses, and new educational tools like guidance documents. The bulk of the document consists of the catalogue content organized into sections covering personal protective equipment, locking, signaling, low voltage test and measurement, low voltage earthing systems, low voltage live working tools, medium voltage substation equipment, medium voltage equipment, high voltage lines and switchgear equipment, and earthing connections. Each section lists and provides brief descriptions of the various safety products
1) The document provides installation instructions for heatshrink termination of 3 core polymeric cables with voltages ranging from 7.2kV to 36kV. It describes the steps for preparing the cable, installing stress control tapes and tubes, cable lugs, and rain sheds.
2) Key steps include removing the cable sheath and screens, applying stress control tape, installing cable lugs and boots, and shrinking tubes onto the assembly. Proper distances must be maintained for phase clearance and bending radii.
3) Outdoor terminations require additional rain sheds installed from the bottom up at specified distances between the anti-track tube and shed edges. Indoor distances between phases and grounds are also outlined.
THORNE & DERRICK based in the UK are international distributors of LV, MV & HV Cable Installation, Jointing, Substation & Electrical Equipment.
Since 1985, T&D have established an international reputation based on SERVICE | INTEGRITY | TRUST.
Contact us for 3M, ABB, Alroc, AN Wallis, CATU, Cembre, Centriforce, CMP, CSD, Elastimold, Ellis Patents, Emtelle, Euromold, Filoform , Furse, Lucy Electric & Zodion, Nexans, Pfisterer, Polypipe, Prysmian, Roxtec, Sicame, WT Henley.
The document provides technical specifications for EJB series explosion proof enclosures made of galvanized carbon steel. The enclosures have an IP rating of IP65, IP66, or IP67 and an operating temperature range of -50°C to +60°C. They offer explosion protection of Ex d IIB or IIB+H2 and are suitable for indoor and outdoor use in hazardous industrial areas. The enclosures can house various electrical and electronic components and accessories.
This certificate of attendance awards Adam Rowe and Michael Wenglorz for successfully completing a SIL (Safety Integrity Level) training seminar held by PEPPERL+FUCHS GB LTD on November 7th, 2016.
Thorne & Derrick were established in 1985 and are now one of the largest specialist distributors and worldwide exporters of equipment for explosive atmospheres. They stock over 100,000 products from over 100 brands for industries such as oil & gas, mining, manufacturing, and more. Thorne & Derrick provide hazardous area lighting, heating, sensors, detectors, valves, cables, and other equipment certified for explosive atmospheres. They also offer technical support, international delivery, and over 30 years of experience in serving hazardous area applications.
This document is an application datasheet for flow measurement devices. It requests contact and process information from customers. It asks for details about the application environment and pipe parameters. It also requests information on process parameters like temperature, pressure, and flow rates. Finally, it inquires about desired measurement configuration including units of measurement, data logging, power supply, and electrical and communication interfaces.
This document provides information on Emtelle fibre optic cables, including:
- An overview of Emtelle as a leading global manufacturer of blown fibre and ducted network solutions.
- Descriptions of different cable types including Direct Install, Direct Buried, Aerial, and more.
- Specifications for various cable models including fibre count options, dimensions, tensile strength and other test standards.
Thorne & Derrick provide electrical heating solutions for industrial and hazardous area applications. They have over 30 years of experience in process heating and specialize in frost protection and winterization packages. They offer a wide range of electrical heating equipment for hazardous areas, including portable air heaters certified for use in explosive atmospheres. Their product range and engineering expertise help customers solve heating challenges across various industries.
The document provides information on tools for preparing electric utility distribution and transmission cables. It includes tools for stripping insulation from secondary distribution cables, mid-span stripping of overhead primary distribution cables, insulation stripping and jacket stripping for underground cables, removing insulation shields from underground and transmission cables, pencilling transmission cables, and other specialty distribution tools. Tables provide part numbers and specifications for various cable end strippers and other tools to prepare different cable types.
The document describes the RIDGID micro CD-100 combustible gas leak detector. It can quickly identify the presence of combustible gases with a flexible 41 cm probe. It is designed to detect gases like methane, propane, and more. The micro CD-100 has adjustable sensitivity settings and Tri-Mode Detection that provides alerts through visual, audible or vibration signals. It is listed as catalog number 36163 and weighs 0.45 kg.
Itron is a leading technology company dedicated to measuring, managing, and analyzing energy and water resources. It provides comprehensive solutions including meters, communication systems, software, and consulting services to over 8,000 customers in more than 100 countries. Itron employs thousands of people globally and invests over 8.5% of its $1.9 billion annual revenue in research and development.
The FiloSeal+HD is a duct sealing system that uses hexagonal tubes and a flexible silicon-based sealant to seal cable configurations and pipes within conduits. It provides resistance to up to 2 bars of pressure and can withstand pulling forces of 100kg on sealed cables. The sealant is easily applied and cures with air, providing high levels of gas and water tightness. The system allows for easy addition or removal of cables or pipes as needed.
Enchancing adoption of Open Source Libraries. A case study on Albumentations.AIVladimir Iglovikov, Ph.D.
Presented by Vladimir Iglovikov:
- https://www.linkedin.com/in/iglovikov/
- https://x.com/viglovikov
- https://www.instagram.com/ternaus/
This presentation delves into the journey of Albumentations.ai, a highly successful open-source library for data augmentation.
Created out of a necessity for superior performance in Kaggle competitions, Albumentations has grown to become a widely used tool among data scientists and machine learning practitioners.
This case study covers various aspects, including:
People: The contributors and community that have supported Albumentations.
Metrics: The success indicators such as downloads, daily active users, GitHub stars, and financial contributions.
Challenges: The hurdles in monetizing open-source projects and measuring user engagement.
Development Practices: Best practices for creating, maintaining, and scaling open-source libraries, including code hygiene, CI/CD, and fast iteration.
Community Building: Strategies for making adoption easy, iterating quickly, and fostering a vibrant, engaged community.
Marketing: Both online and offline marketing tactics, focusing on real, impactful interactions and collaborations.
Mental Health: Maintaining balance and not feeling pressured by user demands.
Key insights include the importance of automation, making the adoption process seamless, and leveraging offline interactions for marketing. The presentation also emphasizes the need for continuous small improvements and building a friendly, inclusive community that contributes to the project's growth.
Vladimir Iglovikov brings his extensive experience as a Kaggle Grandmaster, ex-Staff ML Engineer at Lyft, sharing valuable lessons and practical advice for anyone looking to enhance the adoption of their open-source projects.
Explore more about Albumentations and join the community at:
GitHub: https://github.com/albumentations-team/albumentations
Website: https://albumentations.ai/
LinkedIn: https://www.linkedin.com/company/100504475
Twitter: https://x.com/albumentations
Securing your Kubernetes cluster_ a step-by-step guide to success !KatiaHIMEUR1
Today, after several years of existence, an extremely active community and an ultra-dynamic ecosystem, Kubernetes has established itself as the de facto standard in container orchestration. Thanks to a wide range of managed services, it has never been so easy to set up a ready-to-use Kubernetes cluster.
However, this ease of use means that the subject of security in Kubernetes is often left for later, or even neglected. This exposes companies to significant risks.
In this talk, I'll show you step-by-step how to secure your Kubernetes cluster for greater peace of mind and reliability.
A tale of scale & speed: How the US Navy is enabling software delivery from l...sonjaschweigert1
Rapid and secure feature delivery is a goal across every application team and every branch of the DoD. The Navy’s DevSecOps platform, Party Barge, has achieved:
- Reduction in onboarding time from 5 weeks to 1 day
- Improved developer experience and productivity through actionable findings and reduction of false positives
- Maintenance of superior security standards and inherent policy enforcement with Authorization to Operate (ATO)
Development teams can ship efficiently and ensure applications are cyber ready for Navy Authorizing Officials (AOs). In this webinar, Sigma Defense and Anchore will give attendees a look behind the scenes and demo secure pipeline automation and security artifacts that speed up application ATO and time to production.
We will cover:
- How to remove silos in DevSecOps
- How to build efficient development pipeline roles and component templates
- How to deliver security artifacts that matter for ATO’s (SBOMs, vulnerability reports, and policy evidence)
- How to streamline operations with automated policy checks on container images
UiPath Test Automation using UiPath Test Suite series, part 6DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 6. In this session, we will cover Test Automation with generative AI and Open AI.
UiPath Test Automation with generative AI and Open AI webinar offers an in-depth exploration of leveraging cutting-edge technologies for test automation within the UiPath platform. Attendees will delve into the integration of generative AI, a test automation solution, with Open AI advanced natural language processing capabilities.
Throughout the session, participants will discover how this synergy empowers testers to automate repetitive tasks, enhance testing accuracy, and expedite the software testing life cycle. Topics covered include the seamless integration process, practical use cases, and the benefits of harnessing AI-driven automation for UiPath testing initiatives. By attending this webinar, testers, and automation professionals can gain valuable insights into harnessing the power of AI to optimize their test automation workflows within the UiPath ecosystem, ultimately driving efficiency and quality in software development processes.
What will you get from this session?
1. Insights into integrating generative AI.
2. Understanding how this integration enhances test automation within the UiPath platform
3. Practical demonstrations
4. Exploration of real-world use cases illustrating the benefits of AI-driven test automation for UiPath
Topics covered:
What is generative AI
Test Automation with generative AI and Open AI.
UiPath integration with generative AI
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
Unlocking Productivity: Leveraging the Potential of Copilot in Microsoft 365, a presentation by Christoforos Vlachos, Senior Solutions Manager – Modern Workplace, Uni Systems
In the rapidly evolving landscape of technologies, XML continues to play a vital role in structuring, storing, and transporting data across diverse systems. The recent advancements in artificial intelligence (AI) present new methodologies for enhancing XML development workflows, introducing efficiency, automation, and intelligent capabilities. This presentation will outline the scope and perspective of utilizing AI in XML development. The potential benefits and the possible pitfalls will be highlighted, providing a balanced view of the subject.
We will explore the capabilities of AI in understanding XML markup languages and autonomously creating structured XML content. Additionally, we will examine the capacity of AI to enrich plain text with appropriate XML markup. Practical examples and methodological guidelines will be provided to elucidate how AI can be effectively prompted to interpret and generate accurate XML markup.
Further emphasis will be placed on the role of AI in developing XSLT, or schemas such as XSD and Schematron. We will address the techniques and strategies adopted to create prompts for generating code, explaining code, or refactoring the code, and the results achieved.
The discussion will extend to how AI can be used to transform XML content. In particular, the focus will be on the use of AI XPath extension functions in XSLT, Schematron, Schematron Quick Fixes, or for XML content refactoring.
The presentation aims to deliver a comprehensive overview of AI usage in XML development, providing attendees with the necessary knowledge to make informed decisions. Whether you’re at the early stages of adopting AI or considering integrating it in advanced XML development, this presentation will cover all levels of expertise.
By highlighting the potential advantages and challenges of integrating AI with XML development tools and languages, the presentation seeks to inspire thoughtful conversation around the future of XML development. We’ll not only delve into the technical aspects of AI-powered XML development but also discuss practical implications and possible future directions.
LF Energy Webinar: Electrical Grid Modelling and Simulation Through PowSyBl -...DanBrown980551
Do you want to learn how to model and simulate an electrical network from scratch in under an hour?
Then welcome to this PowSyBl workshop, hosted by Rte, the French Transmission System Operator (TSO)!
During the webinar, you will discover the PowSyBl ecosystem as well as handle and study an electrical network through an interactive Python notebook.
PowSyBl is an open source project hosted by LF Energy, which offers a comprehensive set of features for electrical grid modelling and simulation. Among other advanced features, PowSyBl provides:
- A fully editable and extendable library for grid component modelling;
- Visualization tools to display your network;
- Grid simulation tools, such as power flows, security analyses (with or without remedial actions) and sensitivity analyses;
The framework is mostly written in Java, with a Python binding so that Python developers can access PowSyBl functionalities as well.
What you will learn during the webinar:
- For beginners: discover PowSyBl's functionalities through a quick general presentation and the notebook, without needing any expert coding skills;
- For advanced developers: master the skills to efficiently apply PowSyBl functionalities to your real-world scenarios.
GraphSummit Singapore | The Art of the Possible with Graph - Q2 2024Neo4j
Neha Bajwa, Vice President of Product Marketing, Neo4j
Join us as we explore breakthrough innovations enabled by interconnected data and AI. Discover firsthand how organizations use relationships in data to uncover contextual insights and solve our most pressing challenges – from optimizing supply chains, detecting fraud, and improving customer experiences to accelerating drug discoveries.
DevOps and Testing slides at DASA ConnectKari Kakkonen
My and Rik Marselis slides at 30.5.2024 DASA Connect conference. We discuss about what is testing, then what is agile testing and finally what is Testing in DevOps. Finally we had lovely workshop with the participants trying to find out different ways to think about quality and testing in different parts of the DevOps infinity loop.
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...Neo4j
Leonard Jayamohan, Partner & Generative AI Lead, Deloitte
This keynote will reveal how Deloitte leverages Neo4j’s graph power for groundbreaking digital twin solutions, achieving a staggering 100x performance boost. Discover the essential role knowledge graphs play in successful generative AI implementations. Plus, get an exclusive look at an innovative Neo4j + Generative AI solution Deloitte is developing in-house.
zkStudyClub - Reef: Fast Succinct Non-Interactive Zero-Knowledge Regex ProofsAlex Pruden
This paper presents Reef, a system for generating publicly verifiable succinct non-interactive zero-knowledge proofs that a committed document matches or does not match a regular expression. We describe applications such as proving the strength of passwords, the provenance of email despite redactions, the validity of oblivious DNS queries, and the existence of mutations in DNA. Reef supports the Perl Compatible Regular Expression syntax, including wildcards, alternation, ranges, capture groups, Kleene star, negations, and lookarounds. Reef introduces a new type of automata, Skipping Alternating Finite Automata (SAFA), that skips irrelevant parts of a document when producing proofs without undermining soundness, and instantiates SAFA with a lookup argument. Our experimental evaluation confirms that Reef can generate proofs for documents with 32M characters; the proofs are small and cheap to verify (under a second).
Paper: https://eprint.iacr.org/2023/1886
How to Get CNIC Information System with Paksim Ga.pptxdanishmna97
Pakdata Cf is a groundbreaking system designed to streamline and facilitate access to CNIC information. This innovative platform leverages advanced technology to provide users with efficient and secure access to their CNIC details.
Threats to mobile devices are more prevalent and increasing in scope and complexity. Users of mobile devices desire to take full advantage of the features
available on those devices, but many of the features provide convenience and capability but sacrifice security. This best practices guide outlines steps the users can take to better protect personal devices and information.
Epistemic Interaction - tuning interfaces to provide information for AI supportAlan Dix
Paper presented at SYNERGY workshop at AVI 2024, Genoa, Italy. 3rd June 2024
https://alandix.com/academic/papers/synergy2024-epistemic/
As machine learning integrates deeper into human-computer interactions, the concept of epistemic interaction emerges, aiming to refine these interactions to enhance system adaptability. This approach encourages minor, intentional adjustments in user behaviour to enrich the data available for system learning. This paper introduces epistemic interaction within the context of human-system communication, illustrating how deliberate interaction design can improve system understanding and adaptation. Through concrete examples, we demonstrate the potential of epistemic interaction to significantly advance human-computer interaction by leveraging intuitive human communication strategies to inform system design and functionality, offering a novel pathway for enriching user-system engagements.
GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using Deplo...James Anderson
Effective Application Security in Software Delivery lifecycle using Deployment Firewall and DBOM
The modern software delivery process (or the CI/CD process) includes many tools, distributed teams, open-source code, and cloud platforms. Constant focus on speed to release software to market, along with the traditional slow and manual security checks has caused gaps in continuous security as an important piece in the software supply chain. Today organizations feel more susceptible to external and internal cyber threats due to the vast attack surface in their applications supply chain and the lack of end-to-end governance and risk management.
The software team must secure its software delivery process to avoid vulnerability and security breaches. This needs to be achieved with existing tool chains and without extensive rework of the delivery processes. This talk will present strategies and techniques for providing visibility into the true risk of the existing vulnerabilities, preventing the introduction of security issues in the software, resolving vulnerabilities in production environments quickly, and capturing the deployment bill of materials (DBOM).
Speakers:
Bob Boule
Robert Boule is a technology enthusiast with PASSION for technology and making things work along with a knack for helping others understand how things work. He comes with around 20 years of solution engineering experience in application security, software continuous delivery, and SaaS platforms. He is known for his dynamic presentations in CI/CD and application security integrated in software delivery lifecycle.
Gopinath Rebala
Gopinath Rebala is the CTO of OpsMx, where he has overall responsibility for the machine learning and data processing architectures for Secure Software Delivery. Gopi also has a strong connection with our customers, leading design and architecture for strategic implementations. Gopi is a frequent speaker and well-known leader in continuous delivery and integrating security into software delivery.
2. Pepperl+Fuchs is a leading developer and manufacturer of electronic sensors and components for the
global automation market. For more than 60 years, our continuous innovation, high quality products,
and steady growth has guaranteed us continued success.
One Company – Two Divisions
PEPPERL+FUCHS – Protecting your Process
The Process Automation Division is a market leader in intrinsically safe explosion protection. We offer
comprehensive, application-oriented system solutions, including customer-specific control cabinet
solutions for the process industry. A large portfolio of components is available from our various product
lines: isolated barriers, fieldbus infrastructure solutions, remote I/O systems, HART interface solutions,
level measurement devices, purge and pressurization systems, industrial monitors and HMI solutions,
power supplies, separator alarm systems for oil and petrol separators, signaling equipment, lighting as
well as emergency shutdown equipment and accessories.
PEPPERL+FUCHS – SENSING YOUR NEEDS
The main target markets of the Factory Automation Division are machine and plant construction, the
automotive industry, storage and material handling, printing and paper industry, packaging technology,
process equipment, door, gate and elevator construction, mobile equipment, renewable energies.
With the invention of the inductive proximity sensor in 1958, the company set an important milestone in
the development of automation technology. Under the motto “Sensing your needs”, customers benefit
from tailor-made sensor solutions for factory automation. The division offers a wide product range of
industrial sensors whether it’s inductive, photoelectric or ultrasonic sensors, rotary encoders,
identification systems, barcodes, code readers for data-matrix-codes and vision sensors.
About Pepperl+Fuchs
3. Explosion protection for electromechanical equipment
Walsall Limited has been a member of the Pepperl+Fuchs Group since December 2009, and
is incorporated in the United Kingdom. With a 115 year heritage, Walsall is a respected
leader and global supplier in the field of explosion proof electrical equipment. The company
is specialized in the development, certification and production of electromechanical products
for use in hazardous areas. With its knowledge and expertise, Walsall complements
Pepperl+fuchs Process Automation Division perfectly.
Walsall’s main products are based around enclosures in the increased safety, intrinsic safety
and flameproof protection classes with approvals for the integration of a wide range of
electrical apparatus. Enclosures are available in a variety of materials, such as stainless and
mild steel, glass reinforced polyester, aluminium, and cast iron. All product ranges are
certified for use as a combination if more complex system solutions are required. In addition
to the enclosures other product ranges include lighting, signalling equipment and emergency
shutdown equipment. To compliment the core products, the ThreadEx brand offers a range of
certified installation accessories which include thread conversion adaptors, stopping plugs
and breather drain devices, which can all be used in hazardous areas.
7. Ex e and Ex ia Terminal Boxes - Stainless and Mild Steel
Subject to modifications without notice
Pepperl+Fuchs Group
www.pepperl-fuchs.com
USA: +1 330 486 0002
pa-info@us.pepperl-fuchs.com pa-info@de.pepperl-fuchs.com
Singapore: +65 6779 9091
pa-info@sg.pepperl-fuchs.com
Copyright Pepperl+Fuchs
Germany: +49 621 776 22226
Material Ex e Terminal Box Ex e U Component Approved Ex ia Terminal Box
Stainless SLS11 SLS12 SLS13
Mild Steel SLM11 SLM12 SLM13
ORDERING INFORMATION
Optional Extras
6mm earthing stud welded to cover, same material as box CES6
Equipment mounting plate, Stainless Steel SL1MPS
Equipment mounting plate, mild Steel powdercoated SL1MP
10mm internal/external Stainless Steel earth stud SSET
135
55
110
110
86
A
C D
B
57
86
155Ø10.365
74
Ø3.2
All Dimensions in mm.
A GUIDE TO ENTRY CAPACITY
Enclosure Size SL1
Gland Size mm 20 25 32
Side A + B 2 0 0
Side C + D 2 0 0
A GUIDE TO PHYSICAL TERMINAL CAPACITY
Note: This is a guide to Physical Terminal Capacity only. Installers must ensure that the
maximum power dissipation given above is not exceeded
WDU 2.5 WDU 4 WDU 6 WDU 10
Verticle Rail 1 x 13 1 x 10 1 x 7 1 x 6
Horizontal Rail 1 x 13 1 x10 1 x 7 1 x 6
Material Box 1.5mm 316L, (1.4404) Stainless Steel
or Mild Steel (CR4)
Finish Stainless Steel – electropolished
Mild Steel – Powder coated RAL 7032
Weight Empty 1.2Kg
Cover Fixing M6 Stainless Steel hexagon head screws
Gasket One piece fire resistant closed cell Neoprene for Ta
-40°C. One piece silicone rubber for Ta -50°C
Earthing 6mm brass internal/external earth stud as standard.
Optional Stainless Steel earth stud welded to cover
Entries Direct through body
Internal Mounting DIN rail or mounting plate to suit
ENCLOSURE SPECIFICATION
SL1 - 110mm x 110mm x 65mm
HAZARDOUS AREA SPECIFICATION
Marking to 94/9/EC II 2 GD II 1 GD
Type of Protection Ex e IIC T* Gb
Ex tb IIIC T**°C Db
Ex ia IIC T* Ga
Ex tb IIIC T**°C Da
Ambient Temp.°C
Gas
Temperature
Class (T*C)
Dust
Temperature
Class (T**)(°C)
Max Dissipation
(W)
Min Max II 1 G
II 2 G
II 2 GD
II 1 D
II 1 GDSilicone
Gasket
Neoprene
Gasket
-50 -40 +40 T6 80
9 4.5
-50 -40 +55 T5 95
-50 -40 +85 T4 130
-50 N/A +120 T3 160
Ingress Protection IP66 to EN60529:1992
Area Classification Zones 0,1,2,20,21,22
Certification No. SIRA99ATEX3199, SIRA00ATEX3027U
IECExSIR06.0073U, IECExSIR06.0074
GOST-R POCC GB.Mл14.B00224
8. Ex e and Ex ia Terminal Boxes - Stainless and Mild Steel
Subject to modifications without notice
Pepperl+Fuchs Group
www.pepperl-fuchs.com
USA: +1 330 486 0002
pa-info@us.pepperl-fuchs.com pa-info@de.pepperl-fuchs.com
Singapore: +65 6779 9091
pa-info@sg.pepperl-fuchs.com
Copyright Pepperl+Fuchs
Germany: +49 621 776 2222 7
60
145
120
120
96
96
165
Ø10.380
89
A
C D
B
60
Ø3.2
All Dimensions in mm.
A GUIDE TO ENTRY CAPACITY
Enclosure Size SL2
Gland Size mm 20 25 32
Side A + B 2 2 0
Side C + D 2 2 2
A GUIDE TO PHYSICAL TERMINAL CAPACITY
Note: This is a guide to Physical Terminal Capacity only. Installers must ensure that the
maximum power dissipation given above is not exceeded
WDU 2.5 WDU 4 WDU 6 WDU 10
Verticle Rail 1 x 16 1 x 13 1 x 8 1 x 6
Horizontal Rail 1 x 16 1 x 13 1 x 8 1 x 6
SL2 - 120mm x 120mm x 80mm
Material Box 1.5mm 316L, (1.4404) Stainless Steel
or Mild Steel (CR4)
Finish Stainless Steel – electropolished
Mild Steel – Powder coated RAL 7032
Weight Empty 1.4Kg
Cover Fixing M6 Stainless Steel hexagon head screws
Gasket One piece fire resistant closed cell Neoprene for Ta
-40°C. One piece silicone rubber for Ta -50°C
Earthing 6mm brass internal/external earth stud as standard.
Optional Stainless Steel earth stud welded to cover
Entries Direct through body
Internal Mounting DIN rail or mounting plate to suit
ENCLOSURE SPECIFICATION
Material Ex e Terminal Box Ex e U Component Approved Ex ia Terminal Box
Stainless SLS21 SLS22 SLS23
Mild Steel SLM21 SLM22 SLM23
ORDERING INFORMATION
Optional Extras
6mm earthing stud welded to cover, same material as box CES6
Equipment mounting plate, Stainless Steel SL2MPS
Equipment mounting plate, mild Steel powdercoated SL2MP
10mm internal/external Stainless Steel earth stud SSET
HAZARDOUS AREA SPECIFICATION
Marking to 94/9/EC II 2 GD II 1 GD
Type of Protection Ex e IIC T* Gb
Ex tb IIIC T**°C Db
Ex ia IIC T* Ga
Ex tb IIIC T**°C Da
Ambient Temp.°C
Gas
Temperature
Class (T*C)
Dust
Temperature
Class (T**)(°C)
Max Dissipation
(W)
Min Max II 1 G
II 2 G
II 2 GD
II 1 D
II 1 GDSilicone
Gasket
Neoprene
Gasket
-50 -40 +40 T6 80
9 4.5
-50 -40 +55 T5 95
-50 -40 +85 T4 130
-50 N/A +120 T3 160
Ingress Protection IP66 to EN60529:1992
Area Classification Zones 0,1,2,20,21,22
Certification No. SIRA99ATEX3199, SIRA00ATEX3027U
IECExSIR06.0073U, IECExSIR06.0074
GOST-R POCC GB.Mл14.B00224
9. Ex e and Ex ia Terminal Boxes - Stainless and Mild Steel
Subject to modifications without notice
Pepperl+Fuchs Group
www.pepperl-fuchs.com
USA: +1 330 486 0002
pa-info@us.pepperl-fuchs.com pa-info@de.pepperl-fuchs.com
Singapore: +65 6779 9091
pa-info@sg.pepperl-fuchs.com
Copyright Pepperl+Fuchs
Germany: +49 621 776 22228
A GUIDE TO ENTRY CAPACITY
Enclosure Size SL3
Gland Size mm 20 25 32
Side A + B 2 3 0
Side C + D 3 3 0
A GUIDE TO PHYSICAL TERMINAL CAPACITY
Note: This is a guide to Physical Terminal Capacity only. Installers must ensure that the
maximum power dissipation given above is not exceeded
WDU 2.5 WDU 4 WDU 6 WDU 10
Verticle Rail 1 x 20 1 x 17 1 x 12 1 x 9
Horizontal Rail 1 x 15 1 x 12 1 x 8 1 x 6
SL3 - 150mm x 120mm x 80mm
Material Box 1.5mm 316L, (1.4404) Stainless Steel
or Mild Steel (CR4)
Finish Stainless Steel – electropolished
Mild Steel – Powder coated RAL 7032
Weight Empty 1.6Kg
Cover Fixing M6 Stainless Steel hexagon head screws
Gasket One piece fire resistant closed cell Neoprene for Ta
-40°C. One piece silicone rubber for Ta -50°C
Earthing 6mm brass internal/external earth stud as standard.
Optional Stainless Steel earth stud welded to cover
Entries Direct through body
Internal Mounting DIN rail or mounting plate to suit
ENCLOSURE SPECIFICATION
Material Ex e Terminal Box Ex e U Component Approved Ex ia Terminal Box
Stainless SLS31 SLS32 SLS33
Mild Steel SLM31 SLM32 SLM33
ORDERING INFORMATION
Optional Extras
6mm earthing stud welded to cover, same material as box CES6
Equipment mounting plate, Stainless Steel SL3MPS
Equipment mounting plate, mild Steel powdercoated SL3MP
10mm internal/external Stainless Steel earth stud SSET
145
75
120
96
126
150
165
Ø10.3
89
80
A
C D
B
60
Ø3.2
All Dimensions in mm.
HAZARDOUS AREA SPECIFICATION
Marking to 94/9/EC II 2 GD II 1 GD
Type of Protection Ex e IIC T* Gb
Ex tb IIIC T**°C Db
Ex ia IIC T* Ga
Ex tb IIIC T**°C Da
Ambient Temp.°C
Gas
Temperature
Class (T*C)
Dust
Temperature
Class (T**)(°C)
Max Dissipation
(W)
Min Max II 1 G
II 2 G
II 2 GD
II 1 D
II 1 GDSilicone
Gasket
Neoprene
Gasket
-50 -40 +40 T6 80
9 4.5
-50 -40 +55 T5 95
-50 -40 +85 T4 130
-50 N/A +120 T3 160
Ingress Protection IP66 to EN60529:1992
Area Classification Zones 0,1,2,20,21,22
Certification No. SIRA99ATEX3199, SIRA00ATEX3027U
IECExSIR06.0073U, IECExSIR06.0074
GOST-R POCC GB.Mл14.B00224
10. Ex e and Ex ia Terminal Boxes - Stainless and Mild Steel
Subject to modifications without notice
Pepperl+Fuchs Group
www.pepperl-fuchs.com
USA: +1 330 486 0002
pa-info@us.pepperl-fuchs.com pa-info@de.pepperl-fuchs.com
Singapore: +65 6779 9091
pa-info@sg.pepperl-fuchs.com
Copyright Pepperl+Fuchs
Germany: +49 621 776 2222 9
A GUIDE TO ENTRY CAPACITY
Enclosure Size SL4
Gland Size mm 20 25 32
Side A + B 4 3 2
Side C + D 4 3 2
A GUIDE TO PHYSICAL TERMINAL CAPACITY
Note: This is a guide to Physical Terminal Capacity only. Installers must ensure that the
maximum power dissipation given above is not exceeded
WDU 2.5 WDU 4 WDU 6 WDU 10
Verticle Rail 1 x 20 1 x 17 1 x 12 1 x 9
Horizontal Rail 1 x 20 1 x 17 1 x 12 1 x 9
Material Box 1.5mm 316L, (1.4404) Stainless Steel
or Mild Steel (CR4)
Finish Stainless Steel – electropolished
Mild Steel – Powder coated RAL 7032
Weight Empty 1.9Kg
Cover Fixing M6 Stainless Steel hexagon head screws
Gasket One piece fire resistant closed cell Neoprene for Ta
-40°C. One piece silicone rubber for Ta -50°C
Earthing 6mm brass internal/external earth stud as standard.
Optional Stainless Steel earth stud welded to cover
Entries Direct through body
Internal Mounting DIN rail or mounting plate to suit
ENCLOSURE SPECIFICATION
Material Ex e Terminal Box Ex e U Component Approved Ex ia Terminal Box
Stainless SLS41 SLS42 SLS43
Mild Steel SLM41 SLM42 SLM43
ORDERING INFORMATION
Optional Extras
6mm earthing stud welded to cover, same material as box CES6
Equipment mounting plate, Stainless Steel SL4MPS
Equipment mounting plate, mild Steel powdercoated SL4MP
10mm internal/external Stainless Steel earth stud SSET
SL4 - 150mm x 150mm x 90mm
175
75
150
126
150
126
195Ø10.3
99
90
A
C D
B
75
Ø3.2
All Dimensions in mm.
HAZARDOUS AREA SPECIFICATION
Marking to 94/9/EC II 2 GD II 1 GD
Type of Protection Ex e IIC T* Gb
Ex tb IIIC T**°C Db
Ex ia IIC T* Ga
Ex tb IIIC T**°C Da
Ambient Temp.°C
Gas
Temperature
Class (T*C)
Dust
Temperature
Class (T**)(°C)
Max Dissipation
(W)
Min Max II 1 G
II 2 G
II 2 GD
II 1 D
II 1 GDSilicone
Gasket
Neoprene
Gasket
-50 -40 +40 T6 80
11 5.5
-50 -40 +55 T5 95
-50 -40 +85 T4 130
-50 N/A +120 T3 160
Ingress Protection IP66 to EN60529:1992
Area Classification Zones 0,1,2,20,21,22
Certification No. SIRA99ATEX3199, SIRA00ATEX3027U
IECExSIR06.0073U, IECExSIR06.0074
GOST-R POCC GB.Mл14.B00224
11. Ex e and Ex ia Terminal Boxes - Stainless and Mild Steel
Subject to modifications without notice
Pepperl+Fuchs Group
www.pepperl-fuchs.com
USA: +1 330 486 0002
pa-info@us.pepperl-fuchs.com pa-info@de.pepperl-fuchs.com
Singapore: +65 6779 9091
pa-info@sg.pepperl-fuchs.com
Copyright Pepperl+Fuchs
Germany: +49 621 776 222210
A GUIDE TO ENTRY CAPACITY
Enclosure Size SL5
Gland Size mm 20 25 32
Side A + B 4 3 2
Side C + D 5 3 3
A GUIDE TO PHYSICAL TERMINAL CAPACITY
Note: This is a guide to Physical Terminal Capacity only. Installers must ensure that the
maximum power dissipation given above is not exceeded
WDU 2.5 WDU 4 WDU 6 WDU 10
Verticle Rail 1 x 28 1 x 22 1 x 16 1 x 13
Horizontal Rail 1 x 20 1 x 16 1 x 12 1 x 9
SL5 - 190mm x 150mm x 90mm
Material Box 1.5mm 316L, (1.4404) Stainless Steel
or Mild Steel (CR4)
Finish Stainless Steel – electropolished
Mild Steel – Powder coated RAL 7032
Weight Empty 2Kg
Cover Fixing M6 Stainless Steel hexagon head screws
Gasket One piece fire resistant closed cell Neoprene for Ta
-40°C. One piece silicone rubber for Ta -50°C
Earthing 6mm brass internal/external earth stud as standard.
Optional Stainless Steel earth stud welded to cover
Entries Direct through body
Internal Mounting DIN rail or mounting plate to suit
ENCLOSURE SPECIFICATION
Material Ex e Terminal Box Ex e U Component Approved Ex ia Terminal Box
Stainless SLS51 SLS52 SLS53
Mild Steel SLM51 SLM52 SLM53
ORDERING INFORMATION
Optional Extras
6mm earthing stud welded to cover, same material as box CES6
Equipment mounting plate, Stainless Steel SL5MPS
Equipment mounting plate, mild Steel powdercoated SL5MP
10mm internal/external Stainless Steel earth stud SSET
175
95
126
150
190
166
195Ø10.3
99
90
A
C D
B
125
Ø3.2
All Dimensions in mm.
HAZARDOUS AREA SPECIFICATION
Marking to 94/9/EC II 2 GD II 1 GD
Type of Protection Ex e IIC T* Gb
Ex tb IIIC T**°C Db
Ex ia IIC T* Ga
Ex tb IIIC T**°C Da
Ambient Temp.°C
Gas
Temperature
Class (T*C)
Dust
Temperature
Class (T**)(°C)
Max Dissipation
(W)
Min Max II 1 G
II 2 G
II 2 GD
II 1 D
II 1 GDSilicone
Gasket
Neoprene
Gasket
-50 -40 +40 T6 80
11 5.5
-50 -40 +55 T5 95
-50 -40 +85 T4 130
-50 N/A +120 T3 160
Ingress Protection IP66 to EN60529:1992
Area Classification Zones 0,1,2,20,21,22
Certification No. SIRA99ATEX3199, SIRA00ATEX3027U
IECExSIR06.0073U, IECExSIR06.0074
GOST-R POCC GB.Mл14.B00224
12. Ex e and Ex ia Terminal Boxes - Stainless and Mild Steel
Subject to modifications without notice
Pepperl+Fuchs Group
www.pepperl-fuchs.com
USA: +1 330 486 0002
pa-info@us.pepperl-fuchs.com pa-info@de.pepperl-fuchs.com
Singapore: +65 6779 9091
pa-info@sg.pepperl-fuchs.com
Copyright Pepperl+Fuchs
Germany: +49 621 776 2222 11
A GUIDE TO ENTRY CAPACITY
Enclosure Size SL6
Gland Size mm 20 25 32
Side A + B 6 4 3
Side C + D 6 4 3
A GUIDE TO PHYSICAL TERMINAL CAPACITY
Note: This is a guide to Physical Terminal Capacity only. Installers must ensure that the
maximum power dissipation given above is not exceeded
WDU 2.5 WDU 4 WDU 6 WDU 10
Verticle Rail 1 x 28 1 x 22 1 x 17 1 x 13
Horizontal Rail 1 x 28 1 x 22 1 x 17 1 x 13
Material Ex e Terminal Box Ex e U Component Approved Ex ia Terminal Box
Stainless SLS61 SLS62 SLS63
Mild Steel SLM61 SLM62 SLM63
ORDERING INFORMATION
Optional Extras
6mm earthing stud welded to cover, same material as box CES6
Equipment mounting plate, Stainless Steel SL6MPS
Equipment mounting plate, mild Steel powdercoated SL6MP
10mm internal/external Stainless Steel earth stud SSET
Material Box 1.5mm 316L, (1.4404) Stainless Steel
or Mild Steel (CR4)
Finish Stainless Steel – electropolished
Mild Steel – Powder coated RAL 7032
Weight Empty 3Kg
Cover Fixing M6 Stainless Steel hexagon head screws
Gasket One piece fire resistant closed cell Neoprene for Ta
-40°C. One piece silicone rubber for Ta -50°C
Earthing 6mm brass internal/external earth stud as standard.
Optional Stainless Steel earth stud welded to cover
Entries Direct through body
Internal Mounting DIN rail or mounting plate to suit
ENCLOSURE SPECIFICATION
SL6 - 190mm x 190mm x 100mm
215
95
166
190
235
190
166
Ø10.3
109
100
A
C D
B
125
Ø3.2
All Dimensions in mm.
HAZARDOUS AREA SPECIFICATION
Marking to 94/9/EC II 2 GD II 1 GD
Type of Protection Ex e IIC T* Gb
Ex tb IIIC T**°C Db
Ex ia IIC T* Ga
Ex tb IIIC T**°C Da
Ambient Temp.°C
Gas
Temperature
Class (T*C)
Dust
Temperature
Class (T**)(°C)
Max Dissipation
(W)
Min Max II 1 G
II 2 G
II 2 GD
II 1 D
II 1 GDSilicone
Gasket
Neoprene
Gasket
-50 -40 +40 T6 80
13 6.5
-50 -40 +55 T5 95
-50 -40 +85 T4 130
-50 N/A +120 T3 160
Ingress Protection IP66 to EN60529:1992
Area Classification Zones 0,1,2,20,21,22
Certification No. SIRA99ATEX3199, SIRA00ATEX3027U
IECExSIR06.0073U, IECExSIR06.0074
GOST-R POCC GB.Mл14.B00224
13. Subject to modifications without notice
Pepperl+Fuchs Group
www.pepperl-fuchs.com
USA: +1 330 486 0002
pa-info@us.pepperl-fuchs.com pa-info@de.pepperl-fuchs.com
Singapore: +65 6779 9091
pa-info@sg.pepperl-fuchs.com
Copyright Pepperl+Fuchs
Germany: +49 621 776 222212
Notes
15. 1.2
RX1 - 100mm x 150mm x 60mm
Horizontal Rail MK2.5/12 or MK6/8
A GUIDE TO PHYSICAL TERMINAL CAPACITY
Note: This is a guide to Physical Terminal Capacity only. Installers must ensure that the
maximum power dissipation given above is not exceeded
Gland Size mm 20 25 32
Side A + B 3 0 0
Side C + D 2 0 0
A GUIDE TO ENTRY CAPACITY
201
185
150
112.80
52
81.60
100
60
45
68.60
A
C D
B
Ø10.3
All Dimensions in mm.
Material Product Codes
Ex e Terminal Box Ex e U Component Approved
Stainless RX110 RX120
ORDERING INFORMATION
Optional Extras
6mm earthing stud welded to cover CES6
Equipment mounting plate, same material as box RX1MP
10mm internal/external Stainless Steel earth stud SSET
Rain canopy RX1RC
Material Box 1.5mm 316L, (1.4404) Stainless Steel
Finish Stainless Steel – electropolished
Weight Empty 0.86Kg
Cover Fixing M6 Stainless Steel hexagon head slotted screws
Gasket One piece fire resistant closed cell Neoprene for Ta
-40°C. One piece silicone rubber for Ta -50°C
Earthing 6mm brass internal/external earth stud as standard.
Optional earth stud welded to cover
Entries Direct through body
ENCLOSURE SPECIFICATION
HAZARDOUS AREA SPECIFICATION
Marking to 94/9/EC II 2 GD II 1 GD
Type of Protection Ex e IIC T* Gb
Ex tb IIIC T**°C Db
Ex ia IIC T* Ga
Ex tb IIIC T**°C Da
Ambient Temp.°C
Gas
Temperature
Class (T*C)
Dust
Temperature
Class (T**)(°C)
Max Dissipation
(W)
Min Max II 1 G
II 2 G
II 2 GD
II 1 D
II 1 GDSilicone
Gasket
Neoprene
Gasket
-50 -40 +40 T6 80
10 5
-50 -40 +55 T5 95
-50 -40 +85 T4 130
-50 N/A +120 T3 160
Ingress Protection IP66/67 to EN60529:1992
Area Classification Zones 0,1,2,20,21,22
Certification No. SIRA99ATEX3199, SIRA00ATEX3027U
IECExSIR06.0073U, IECExSIR06.0074
GOST-R POCC GB.Mл14.B00224
Ex e and Ex ia Terminal Boxes - Stainless Steel
Subject to modifications without notice
Pepperl+Fuchs Group
www.pepperl-fuchs.com
USA: +1 330 486 0002
pa-info@us.pepperl-fuchs.com pa-info@de.pepperl-fuchs.com
Singapore: +65 6779 9091
pa-info@sg.pepperl-fuchs.com
Copyright Pepperl+Fuchs
Germany: +49 621 776 222214
16. 1.2
RX2 - 150mm x 150mm x 80mm
WDU 2.5 WDU 4 WDU 6 WDU 10
Horizontal Rail 1x18 1x14 1x9 1x7
A GUIDE TO PHYSICAL TERMINAL CAPACITY
Note: This is a guide to Physical Terminal Capacity only. Installers must ensure that the
maximum power dissipation given above is not exceeded
Gland Size mm 20 25 32
Side A + B 3 2 2
Side C + D 3 2 2
A GUIDE TO ENTRY CAPACITY
201
185
150
112.80
52
131.60
150
80
65
88.60
A
C D
B
Ø10.3
All Dimensions in mm.
Material Product Codes
Ex e Terminal Box
Ex e U Component
Approved
Ex ia Terminal Box
Stainless RX210 RX220 RX230
ORDERING INFORMATION
Optional Extras
6mm earthing stud welded to cover CES6
Equipment mounting plate, same material as box RX2MP
10mm internal/external Stainless Steel earth stud SSET
Rain canopy RX2RC
Material Box 1.5mm 316L, (1.4404) Stainless Steel
Finish Stainless Steel – electropolished
Weight Empty 1.2Kg
Cover Fixing M6 Stainless Steel hexagon head slotted screws
Gasket One piece fire resistant closed cell Neoprene for Ta
-40°C. One piece silicone rubber for Ta -50°C
Earthing 6mm brass internal/external earth stud as standard.
Optional earth stud welded to cover
Entries Direct through body
ENCLOSURE SPECIFICATION
HAZARDOUS AREA SPECIFICATION
Marking to 94/9/EC II 2 GD II 1 GD
Type of Protection Ex e IIC T* Gb
Ex tb IIIC T**°C Db
Ex ia IIC T* Ga
Ex tb IIIC T**°C Da
Ambient Temp.°C
Gas
Temperature
Class (T*C)
Dust
Temperature
Class (T**)(°C)
Max Dissipation
(W)
Min Max II 1 G
II 2 G
II 2 GD
II 1 D
II 1 GDSilicone
Gasket
Neoprene
Gasket
-50 -40 +40 T6 80
11 5.5
-50 -40 +55 T5 95
-50 -40 +85 T4 130
-50 N/A +120 T3 160
Ingress Protection IP66/67 to EN60529:1992
Area Classification Zones 0,1,2,20,21,22
Certification No. SIRA99ATEX3199, SIRA00ATEX3027U
IECExSIR06.0073U, IECExSIR06.0074
GOST-R POCC GB.Mл14.B00224
Ex e and Ex ia Terminal Boxes - Stainless Steel
Subject to modifications without notice
Pepperl+Fuchs Group
www.pepperl-fuchs.com
USA: +1 330 486 0002
pa-info@us.pepperl-fuchs.com pa-info@de.pepperl-fuchs.com
Singapore: +65 6779 9091
pa-info@sg.pepperl-fuchs.com
Copyright Pepperl+Fuchs
Germany: +49 621 776 2222 15
17. 1.2
RX3 - 150mm x 200mm x 60mm
WDU 2.5 WDU 4 WDU 6 WDU 10
Horizontal Rail 1x28 1x22 1x16 1x12
A GUIDE TO PHYSICAL TERMINAL CAPACITY
Note: This is a guide to Physical Terminal Capacity only. Installers must ensure that the
maximum power dissipation given above is not exceeded
Gland Size mm 20 25 32
Side A + B 4 0 0
Side C + D 2 0 0
A GUIDE TO ENTRY CAPACITY
251
235
200
162.80
126
131.60
150
60
68.60
45
A
C D
B
Ø10.3
All Dimensions in mm.
Material Product Codes
Ex e Terminal Box
Ex e U Component
Approved
Ex ia Terminal Box
Stainless RX310 RX320 RX330
ORDERING INFORMATION
Optional Extras
6mm earthing stud welded to cover CES6
Equipment mounting plate, same material as box RX3MP
10mm internal/external Stainless Steel earth stud SSET
Rain canopy RX3RC
Material Box 1.5mm 316L, (1.4404) Stainless Steel
Finish Stainless Steel – electropolished
Weight Empty 1.1Kg
Cover Fixing M6 Stainless Steel hexagon head slotted screws
Gasket One piece fire resistant closed cell Neoprene for Ta
-40°C. One piece silicone rubber for Ta -50°C
Earthing 6mm brass internal/external earth stud as standard.
Optional earth stud welded to cover
Entries Direct through body
ENCLOSURE SPECIFICATION
HAZARDOUS AREA SPECIFICATION
Marking to 94/9/EC II 2 GD II 1 GD
Type of Protection Ex e IIC T* Gb
Ex tb IIIC T**°C Db
Ex ia IIC T* Ga
Ex tb IIIC T**°C Da
Ambient Temp.°C
Gas
Temperature
Class (T*C)
Dust
Temperature
Class (T**)(°C)
Max Dissipation
(W)
Min Max II 1 G
II 2 G
II 2 GD
II 1 D
II 1 GDSilicone
Gasket
Neoprene
Gasket
-50 -40 +40 T6 80
11 5.5
-50 -40 +55 T5 95
-50 -40 +85 T4 130
-50 N/A +120 T3 160
Ingress Protection IP66/67 to EN60529:1992
Area Classification Zones 0,1,2,20,21,22
Certification No. SIRA99ATEX3199, SIRA00ATEX3027U
IECExSIR06.0073U, IECExSIR06.0074
GOST-R POCC GB.Mл14.B00224
Ex e and Ex ia Terminal Boxes - Stainless Steel
Subject to modifications without notice
Pepperl+Fuchs Group
www.pepperl-fuchs.com
USA: +1 330 486 0002
pa-info@us.pepperl-fuchs.com pa-info@de.pepperl-fuchs.com
Singapore: +65 6779 9091
pa-info@sg.pepperl-fuchs.com
Copyright Pepperl+Fuchs
Germany: +49 621 776 222216
18. 1.2
RX4 - 200mm x 200mm x 80mm, RX5 - 200mm x 200mm x 120mm, RX6 - 200mm x 200mm x 160mm
WDU 2.5 WDU 4 WDU 6 WDU 10
RX4 Hori. Rail 1x28 1x22 1x16 1x12
RX5 Hori. Rail 1x28 1x22 1x16 1x12
RX6 Hori. Rail 1x28 1x22 1x16 1x12
A GUIDE TO PHYSICAL TERMINAL CAPACITY
Note: This is a guide to Physical Terminal Capacity only. Installers must ensure that the
maximum power dissipation given above is not exceeded
200
163
126
235
260
182
200
115
D3
D1
D2
122
A
C D
B
Gland Size mm 20 25 32
RX4 Side A + B 4 4 3
RX4 Side C + D 4 4 3
RX5 Side A + B 11 8 4
RX5 Side C + D 11 8 4
RX6 Side A + B 16 10 6
RX6 Side C + D 16 10 6
A GUIDE TO ENTRY CAPACITY
All Dimensions in mm.
Material Product Codes
Ex e Terminal Box
Ex e U Component
Approved
Ex ia Terminal Box
Stainless RX410 RX420 RX430
Stainless RX510 RX520 RX530
Stainless RX610 RX620 RX630
ORDERING INFORMATION
Optional Extras
6mm earthing stud welded to cover CES6
Equipment mounting plate, same material as box RX4MP / RX5MP / RX6MP
10mm internal/external Stainless Steel earth stud SSET
Rain canopy RX4RC / RX5RC / RX6RC
Material Box 1.5mm 316L, (1.4404) Stainless Steel
Finish Stainless Steel – electropolished
Weight Empty RX4 - 1.5Kg, RX5 - 2.1Kg, RX6 - 2.4Kg
Cover Fixing M6 Stainless Steel hexagon head slotted screws
Gasket One piece fire resistant closed cell Neoprene for Ta
-40°C. One piece silicone rubber for Ta -50°C
Earthing 6mm brass internal/external earth stud as standard.
Optional earth stud welded to cover
Entries Direct through body
ENCLOSURE SPECIFICATION
Model D1 D2 D3
RX4 88.6 80 64.7
RX5 128.6 120 104.7
RX6 168.6 160 144.7
HAZARDOUS AREA SPECIFICATION
Marking to 94/9/EC II 2 GD II 1 GD
Type of Protection Ex e IIC T* Gb
Ex tb IIIC T**°C Db
Ex ia IIC T* Ga
Ex tb IIIC T**°C Da
Ambient Temp.°C
Gas
Temperature
Class (T*C)
Dust
Temperature
Class (T**)(°C)
Max Dissipation
(W)
Min Max II 1 G
II 2 G
II 2 GD
II 1 D
II 1 GDSilicone
Gasket
Neoprene
Gasket
-50 -40 +40 T6 80
13/14/15 6.5/7/7.5
-50 -40 +55 T5 95
-50 -40 +85 T4 130
-50 N/A +120 T3 160
Ingress Protection IP66/67 to EN60529:1992
Area Classification Zones 0,1,2,20,21,22
Certification No. SIRA99ATEX3199, SIRA00ATEX3027U
IECExSIR06.0073U, IECExSIR06.0074
GOST-R POCC GB.Mл14.B00224
Ex e and Ex ia Terminal Boxes - Stainless Steel
Subject to modifications without notice
Pepperl+Fuchs Group
www.pepperl-fuchs.com
USA: +1 330 486 0002
pa-info@us.pepperl-fuchs.com pa-info@de.pepperl-fuchs.com
Singapore: +65 6779 9091
pa-info@sg.pepperl-fuchs.com
Copyright Pepperl+Fuchs
Germany: +49 621 776 2222 17
19. 1.2
300
263
132
150
335
360
226
65
80
88.60
A
C D
B
RX7 - 150mm x 300mm x 80mm
WDU 2.5 WDU 4 WDU 6 WDU 10
Horizontal Rail 1x48 1x39 1x28 1x22
A GUIDE TO PHYSICAL TERMINAL CAPACITY
Note: This is a guide to Physical Terminal Capacity only. Installers must ensure that the
maximum power dissipation given above is not exceeded
Gland Size mm 20 25 32
Side A + B 7 6 5
Side C + D 3 2 2
A GUIDE TO ENTRY CAPACITY
All Dimensions in mm.
Material Product Codes
Ex e Terminal Box
Ex e U Component
Approved
Ex ia Terminal Box
Stainless RX710 RX720 RX730
ORDERING INFORMATION
Optional Extras
6mm earthing stud welded to cover CES6
Equipment mounting plate, same material as box RX7MP
10mm internal/external Stainless Steel earth stud SSET
Rain canopy RX7RC
Material Box 1.5mm 316L, (1.4404) Stainless Steel
Finish Stainless Steel – electropolished
Weight Empty 1.9Kg
Cover Fixing M6 Stainless Steel hexagon head slotted screws
Gasket One piece fire resistant closed cell Neoprene for Ta
-40°C. One piece silicone rubber for Ta -50°C
Earthing 6mm brass internal/external earth stud as standard.
Optional earth stud welded to cover
Entries Direct through body
ENCLOSURE SPECIFICATION
HAZARDOUS AREA SPECIFICATION
Marking to 94/9/EC II 2 GD II 1 GD
Type of Protection Ex e IIC T* Gb
Ex tb IIIC T**°C Db
Ex ia IIC T* Ga
Ex tb IIIC T**°C Da
Ambient Temp.°C
Gas
Temperature
Class (T*C)
Dust
Temperature
Class (T**)(°C)
Max Dissipation
(W)
Min Max II 1 G
II 2 G
II 2 GD
II 1 D
II 1 GDSilicone
Gasket
Neoprene
Gasket
-50 -40 +40 T6 80
13 6.5
-50 -40 +55 T5 95
-50 -40 +85 T4 130
-50 N/A +120 T3 160
Ingress Protection IP66/67 to EN60529:1992
Area Classification Zones 0,1,2,20,21,22
Certification No. SIRA99ATEX3199, SIRA00ATEX3027U
IECExSIR06.0073U, IECExSIR06.0074
GOST-R POCC GB.Mл14.B00224
Ex e and Ex ia Terminal Boxes - Stainless Steel
Subject to modifications without notice
Pepperl+Fuchs Group
www.pepperl-fuchs.com
USA: +1 330 486 0002
pa-info@us.pepperl-fuchs.com pa-info@de.pepperl-fuchs.com
Singapore: +65 6779 9091
pa-info@sg.pepperl-fuchs.com
Copyright Pepperl+Fuchs
Germany: +49 621 776 222218
20. 1.2
300
263
182
200
226
335
360
115
D3
D1
D2
122
A
C D
B
RX8 - 200mm x 300mm x 80mm, RX9 - 200mm x 300mm x 120mm, RX10 - 200mm x 300mm x 200mm
All Dimensions in mm.
Material Box 1.5mm 316L, (1.4404) Stainless Steel
Finish Stainless Steel – electropolished
Weight Empty RX8 - 2.4Kg, RX9 - 2.7Kg, RX10 - 3.5Kg
Cover Fixing M6 Stainless Steel hexagon head slotted screws
Gasket One piece fire resistant closed cell Neoprene for Ta
-40°C. One piece silicone rubber for Ta -50°C
Earthing 6mm brass internal/external earth stud as standard.
Optional earth stud welded to cover
Entries Direct through body
ENCLOSURE SPECIFICATION
WDU 2.5 WDU 4 WDU 6 WDU 10
RX8 Hori. Rail 1x48 1x39 1x28 1x22
RX9 Hori. Rail 1x48 1x39 1x28 1x22
RX10 Hori. Rail 1x48 1x39 1x28 1x22
A GUIDE TO PHYSICAL TERMINAL CAPACITY
Note: This is a guide to Physical Terminal Capacity only. Installers must ensure that the
maximum power dissipation given above is not exceeded
Gland Size mm 20 25 32
RX8 Side A + B 4 4 3
RX8 Side C + D 3 2 2
RX9 Side A + B 17 12 7
RX9 Side C + D 11 8 4
RX10 Side A + B 35 22 14
RX10 Side C + D 20 14 8
A GUIDE TO ENTRY CAPACITY
Material Product Codes
Ex e Terminal Box
Ex e U Component
Approved
Ex ia Terminal Box
Stainless RX810 RX820 RX830
Stainless RX910 RX920 RX930
Stainless RX1010 RX1020 RX1030
ORDERING INFORMATION
Optional Extras
6mm earthing stud welded to cover CES6
Equipment mounting plate, same material as box RX8MP / RX9MP / RX10MP
10mm internal/external Stainless Steel earth stud SSET
Rain canopy RX8RC / RX9RC / RX10RC
Model D1 D2 D3
RX8 88.6 80 64.7
RX9 128.6 120 104.7
RX10 208.6 200 184.7
HAZARDOUS AREA SPECIFICATION
Marking to 94/9/EC II 2 GD II 1 GD
Type of Protection Ex e IIC T* Gb
Ex tb IIIC T**°C Db
Ex ia IIC T* Ga
Ex tb IIIC T**°C Da
Ambient Temp.°C
Gas
Temperature
Class (T*C)
Dust
Temperature
Class (T**)(°C)
Max Dissipation
(W)
Min Max II 1 G
II 2 G
II 2 GD
II 1 D
II 1 GDSilicone
Gasket
Neoprene
Gasket
-50 -40 +40 T6 80
14/16/18 7/8/9
-50 -40 +55 T5 95
-50 -40 +85 T4 130
-50 N/A +120 T3 160
Ingress Protection IP66/67 to EN60529:1992
Area Classification Zones 0,1,2,20,21,22
Certification No. SIRA99ATEX3199, SIRA00ATEX3027U
IECExSIR06.0073U, IECExSIR06.0074
GOST-R POCC GB.Mл14.B00224
Ex e and Ex ia Terminal Boxes - Stainless Steel
Subject to modifications without notice
Pepperl+Fuchs Group
www.pepperl-fuchs.com
USA: +1 330 486 0002
pa-info@us.pepperl-fuchs.com pa-info@de.pepperl-fuchs.com
Singapore: +65 6779 9091
pa-info@sg.pepperl-fuchs.com
Copyright Pepperl+Fuchs
Germany: +49 621 776 2222 19
21. 1.2
300
263
226
335
360
282
300
215
D3
D1
D2
222
A
C D
B
RX11 - 300mm x 300mm x 120mm, RX12 - 300mm x 300mm x 160mm, RX13 - 300mm x 300mm x 200mm
All Dimensions in mm.
Material Box 1.5mm 316L, (1.4404) Stainless Steel
Finish Stainless Steel – electropolished
Weight Empty RX11 - 3.5Kg, RX12 - 4Kg, RX13 - 4.5Kg
Cover Fixing M6 Stainless Steel hexagon head slotted screws
Gasket One piece fire resistant closed cell Neoprene for Ta
-40°C. One piece silicone rubber for Ta -50°C
Earthing 6mm brass internal/external earth stud as standard.
Optional earth stud welded to cover
Entries Direct through body
ENCLOSURE SPECIFICATION
WDU 2.5 WDU 4 WDU 6 WDU 10
RX11 Hori. Rail 2x48 2x39 2x28 2x22
RX12 Hori. Rail 2x48 2x39 2x28 2x22
RX13 Hori. Rail 2x48 2x39 2x28 2x22
A GUIDE TO PHYSICAL TERMINAL CAPACITY
Note: This is a guide to Physical Terminal Capacity only. Installers must ensure that the
maximum power dissipation given above is not exceeded
Gland Size mm 20 25 32
RX11 Side A + B 11 8 4
RX11 Side C + D 11 8 4
RX12 Side A + B 28 16 10
RX12 Side C + D 28 16 10
RX13 Side A + B 35 22 14
RX13 Side C + D 35 22 14
A GUIDE TO ENTRY CAPACITY
Material Product Codes
Ex e Terminal Box
Ex e U Component
Approved
Ex ia Terminal Box
Stainless RX1110 RX1120 RX1130
Stainless RX1210 RX1220 RX1230
Stainless RX1310 RX1320 RX1330
ORDERING INFORMATION
Optional Extras
6mm earthing stud welded to cover CES6
Equipment mounting plate, same material as box RX11MP / RX12MP / RX13MP
10mm internal/external Stainless Steel earth stud SSET
Rain canopy RX11RC / RX12RC / RX13RC
Model D1 D2 D3
RX11 126.8 120 104.7
RX12 168.6 160 144.7
RX13 208.6 200 184.7
HAZARDOUS AREA SPECIFICATION
Marking to 94/9/EC II 2 GD II 1 GD
Type of Protection Ex e IIC T* Gb
Ex tb IIIC T**°C Db
Ex ia IIC T* Ga
Ex tb IIIC T**°C Da
Ambient Temp.°C
Gas
Temperature
Class (T*C)
Dust
Temperature
Class (T**)(°C)
Max Dissipation
(W)
Min Max II 1 G
II 2 G
II 2 GD
II 1 D
II 1 GDSilicone
Gasket
Neoprene
Gasket
-50 -40 +40 T6 80
18/20/22 9.5/10/11
-50 -40 +55 T5 95
-50 -40 +85 T4 130
-50 N/A +120 T3 160
Ingress Protection IP66/67 to EN60529:1992
Area Classification Zones 0,1,2,20,21,22
Certification No. SIRA99ATEX3199, SIRA00ATEX3027U
IECExSIR06.0073U, IECExSIR06.0074
GOST-R POCC GB.Mл14.B00224
Ex e and Ex ia Terminal Boxes - Stainless Steel
Subject to modifications without notice
Pepperl+Fuchs Group
www.pepperl-fuchs.com
USA: +1 330 486 0002
pa-info@us.pepperl-fuchs.com pa-info@de.pepperl-fuchs.com
Singapore: +65 6779 9091
pa-info@sg.pepperl-fuchs.com
Copyright Pepperl+Fuchs
Germany: +49 621 776 222220
22. 1.2
380
343
306
415
440
362
380
295
D3
D1
D2
302
A
C D
B
RX14 - 380mm x 380mm x 160mm, RX15 - 380mm x 380mm x 200mm
All Dimensions in mm.
Material Box 1.5mm 316L, (1.4404) Stainless Steel
Finish Stainless Steel – electropolished
Weight Empty RX14 - 5.6Kg, RX15 - 6.2Kg
Cover Fixing M6 Stainless Steel hexagon head slotted screws
Gasket One piece fire resistant closed cell Neoprene for Ta
-40°C. One piece silicone rubber for Ta -50°C
Earthing 6mm brass internal/external earth stud as standard.
Optional earth stud welded to cover
Entries Direct through body
ENCLOSURE SPECIFICATION
WDU 2.5 WDU 4 WDU 6 WDU 10
RX14 Hori. Rail 3x64 3x52 3x38 3x30
RX15 Hori. Rail 3x64 3x52 3x38 3x30
A GUIDE TO PHYSICAL TERMINAL CAPACITY
Note: This is a guide to Physical Terminal Capacity only. Installers must ensure that the
maximum power dissipation given above is not exceeded
Gland Size mm 20 25 32
RX14 Side A + B 38 22 12
RX14 Side C + D 38 22 12
RX15 Side A + B 48 30 18
RX15 Side C + D 48 30 18
A GUIDE TO ENTRY CAPACITY
Material Product Codes
Ex e Terminal Box
Ex e U Component
Approved
Ex ia Terminal Box
Stainless RX1410 RX1420 RX1430
Stainless RX1510 RX1520 RX1530
ORDERING INFORMATION
Optional Extras
6mm earthing stud welded to cover CES6
Equipment mounting plate, same material as box RX14MP / RX15MP
10mm internal/external Stainless Steel earth stud SSET
Rain canopy RX14RC / RX15RC
Model D1 D2 D3
RX14 168.6 160 144.7
RX15 208.6 200 184.7
HAZARDOUS AREA SPECIFICATION
Marking to 94/9/EC II 2 GD II 1 GD
Type of Protection Ex e IIC T* Gb
Ex tb IIIC T**°C Db
Ex ia IIC T* Ga
Ex tb IIIC T**°C Da
Ambient Temp.°C
Gas
Temperature
Class (T*C)
Dust
Temperature
Class (T**)(°C)
Max Dissipation
(W)
Min Max II 1 G
II 2 G
II 2 GD
II 1 D
II 1 GDSilicone
Gasket
Neoprene
Gasket
-50 -40 +40 T6 80
25/27 12.5/13.5
-50 -40 +55 T5 95
-50 -40 +85 T4 130
-50 N/A +120 T3 160
Ingress Protection IP66/67 to EN60529:1992
Area Classification Zones 0,1,2,20,21,22
Certification No. SIRA99ATEX3199, SIRA00ATEX3027U
IECExSIR06.0073U, IECExSIR06.0074
GOST-R POCC GB.Mл14.B00224
Ex e and Ex ia Terminal Boxes - Stainless Steel
Subject to modifications without notice
Pepperl+Fuchs Group
www.pepperl-fuchs.com
USA: +1 330 486 0002
pa-info@us.pepperl-fuchs.com pa-info@de.pepperl-fuchs.com
Singapore: +65 6779 9091
pa-info@sg.pepperl-fuchs.com
Copyright Pepperl+Fuchs
Germany: +49 621 776 2222 21
23. 1.2
RX16 - 150mm x 400mm x 80mm
WDU 2.5 WDU 4 WDU 6 WDU 10
Horizontal Rail 1x68 1x56 1x41 1x32
A GUIDE TO PHYSICAL TERMINAL CAPACITY
Note: This is a guide to Physical Terminal Capacity only. Installers must ensure that the
maximum power dissipation given above is not exceeded
Gland Size mm 20 25 32
Side A + B 40 22 14
Side C + D 3 2 2
A GUIDE TO ENTRY CAPACITY
Material Product Codes
Ex e Terminal Box
Ex e U Component
Approved
Ex ia Terminal Box
Stainless RX1610 RX1620 RX1630
ORDERING INFORMATION
Optional Extras
6mm earthing stud welded to cover CES6
Equipment mounting plate, same material as box RX16MP
10mm internal/external Stainless Steel earth stud SSET
Rain canopy RX16RC
Material Box 1.5mm 316L, (1.4404) Stainless Steel
Finish Stainless Steel – electropolished
Weight Empty 2.4Kg
Cover Fixing M6 Stainless Steel hexagon head slotted screws
Gasket One piece fire resistant closed cell Neoprene for Ta
-40°C. One piece silicone rubber for Ta -50°C
Earthing 6mm brass internal/external earth stud as standard.
Optional earth stud welded to cover
Entries Direct through body
ENCLOSURE SPECIFICATION
400
363
435
460
326
132
150
65
80
88.60
A
C D
B
All Dimensions in mm.
HAZARDOUS AREA SPECIFICATION
Marking to 94/9/EC II 2 GD II 1 GD
Type of Protection Ex e IIC T* Gb
Ex tb IIIC T**°C Db
Ex ia IIC T* Ga
Ex tb IIIC T**°C Da
Ambient Temp.°C
Gas
Temperature
Class (T*C)
Dust
Temperature
Class (T**)(°C)
Max Dissipation
(W)
Min Max II 1 G
II 2 G
II 2 GD
II 1 D
II 1 GDSilicone
Gasket
Neoprene
Gasket
-50 -40 +40 T6 80
15 7.5
-50 -40 +55 T5 95
-50 -40 +85 T4 130
-50 N/A +120 T3 160
Ingress Protection IP66/67 to EN60529:1992
Area Classification Zones 0,1,2,20,21,22
Certification No. SIRA99ATEX3199, SIRA00ATEX3027U
IECExSIR06.0073U, IECExSIR06.0074
GOST-R POCC GB.Mл14.B00224
Ex e and Ex ia Terminal Boxes - Stainless Steel
Subject to modifications without notice
Pepperl+Fuchs Group
www.pepperl-fuchs.com
USA: +1 330 486 0002
pa-info@us.pepperl-fuchs.com pa-info@de.pepperl-fuchs.com
Singapore: +65 6779 9091
pa-info@sg.pepperl-fuchs.com
Copyright Pepperl+Fuchs
Germany: +49 621 776 222222
24. 1.2
400
363
182
200
326
435
460
115
122
D3
D1
D2
A
C D
B
RX17 - 200mm x 400mm x 120mm, RX18 - 200mm x 400mm x 160mm, RX19 - 200mm x 400mm x 200mm
All Dimensions in mm.
Material Box 1.5mm 316L, (1.4404) Stainless Steel
Finish Stainless Steel – electropolished
Weight Empty RX17 - 3.4Kg, RX18 - 3.9Kg, RX19 - 4.3Kg
Cover Fixing M6 Stainless Steel hexagon head slotted screws
Gasket One piece fire resistant closed cell Neoprene for Ta
-40°C. One piece silicone rubber for Ta -50°C
Earthing 6mm brass internal/external earth stud as standard.
Optional earth stud welded to cover
Entries Direct through body
ENCLOSURE SPECIFICATION
WDU 2.5 WDU 4 WDU 6 WDU 10
RX17 Hori. Rail 1x68 1x56 1x41 1x32
RX18 Hori. Rail 1x68 1x56 1x41 1x32
RX19 Hori. Rail 1x68 1x56 1x41 1x32
A GUIDE TO PHYSICAL TERMINAL CAPACITY
Note: This is a guide to Physical Terminal Capacity only. Installers must ensure that the
maximum power dissipation given above is not exceeded
Gland Size mm 20 25 32
RX17 Side A + B 24 16 9
RX17 Side C + D 11 8 4
RX18 Side A + B 40 22 14
RX18 Side C + D 16 10 6
RX19 Side A + B 50 32 20
RX19 Side C + D 20 14 8
A GUIDE TO ENTRY CAPACITY
Material Product Codes
Ex e Terminal Box
Ex e U Component
Approved
Ex ia Terminal Box
Stainless RX1710 RX1720 RX1730
Stainless RX1810 RX1820 RX1830
Stainless RX1910 RX1920 RX1930
ORDERING INFORMATION
Optional Extras
6mm earthing stud welded to cover CES6
Equipment mounting plate, same material as box RX17MP / RX18MP / RX19MP
10mm internal/external Stainless Steel earth stud SSET
Rain canopy RX17RC / RX18RC / RX19RC
Model D1 D2 D3
RX17 128.6 120 104.7
RX18 168.6 160 144.7
RX19 208.6 200 184.7
HAZARDOUS AREA SPECIFICATION
Marking to 94/9/EC II 2 GD II 1 GD
Type of Protection Ex e IIC T* Gb
Ex tb IIIC T**°C Db
Ex ia IIC T* Ga
Ex tb IIIC T**°C Da
Ambient Temp.°C
Gas
Temperature
Class (T*C)
Dust
Temperature
Class (T**)(°C)
Max Dissipation
(W)
Min Max II 1 G
II 2 G
II 2 GD
II 1 D
II 1 GDSilicone
Gasket
Neoprene
Gasket
-50 -40 +40 T6 80
18/20/22 9.5/10/11
-50 -40 +55 T5 95
-50 -40 +85 T4 130
-50 N/A +120 T3 160
Ingress Protection IP66/67 to EN60529:1992
Area Classification Zones 0,1,2,20,21,22
Certification No. SIRA99ATEX3199, SIRA00ATEX3027U
IECExSIR06.0073U, IECExSIR06.0074
GOST-R POCC GB.Mл14.B00224
Ex e and Ex ia Terminal Boxes - Stainless Steel
Subject to modifications without notice
Pepperl+Fuchs Group
www.pepperl-fuchs.com
USA: +1 330 486 0002
pa-info@us.pepperl-fuchs.com pa-info@de.pepperl-fuchs.com
Singapore: +65 6779 9091
pa-info@sg.pepperl-fuchs.com
Copyright Pepperl+Fuchs
Germany: +49 621 776 2222 23
25. 1.2
400
363
326
435
460
282
300
215
222
D3
D1
D2
A
C D
B
RX20 - 300mm x 400mm x 160mm, RX21 - 300mm x 400mm x 200mm
All Dimensions in mm.
Material Box 1.5mm 316L, (1.4404) Stainless Steel
Finish Stainless Steel – electropolished
Weight Empty RX20 - 5Kg, RX21 - 5.5Kg
Cover Fixing M6 Stainless Steel hexagon head slotted screws
Gasket One piece fire resistant closed cell Neoprene for Ta
-40°C. One piece silicone rubber for Ta -50°C
Earthing 6mm brass internal/external earth stud as standard.
Optional earth stud welded to cover
Entries Direct through body
ENCLOSURE SPECIFICATION
WDU 2.5 WDU 4 WDU 6 WDU 10
RX20 Hori. Rail 2x68 2x56 2x41 2x32
RX21 Hori. Rail 2x68 2x56 2x41 2x32
A GUIDE TO PHYSICAL TERMINAL CAPACITY
Note: This is a guide to Physical Terminal Capacity only. Installers must ensure that the
maximum power dissipation given above is not exceeded
Gland Size mm 20 25 32
RX20 Side A + B 40 22 14
RX20 Side C + D 28 16 10
RX21 Side A + B 50 32 20
RX21 Side C + D 35 22 14
A GUIDE TO ENTRY CAPACITY
Material Product Codes
Ex e Terminal Box
Ex e U Component
Approved
Ex ia Terminal Box
Stainless RX2010 RX2020 RX2030
Stainless RX2110 RX2120 RX2130
ORDERING INFORMATION
Optional Extras
6mm earthing stud welded to cover CES6
Equipment mounting plate, same material as box RX20MP / RX21MP
10mm internal/external Stainless Steel earth stud SSET
Rain canopy RX20RC / RX21RC
Model D1 D2 D3
RX20 168.6 160 144.7
RX21 208.6 200 184.7
HAZARDOUS AREA SPECIFICATION
Marking to 94/9/EC II 2 GD II 1 GD
Type of Protection Ex e IIC T* Gb
Ex tb IIIC T**°C Db
Ex ia IIC T* Ga
Ex tb IIIC T**°C Da
Ambient Temp.°C
Gas
Temperature
Class (T*C)
Dust
Temperature
Class (T**)(°C)
Max Dissipation
(W)
Min Max II 1 G
II 2 G
II 2 GD
II 1 D
II 1 GDSilicone
Gasket
Neoprene
Gasket
-50 -40 +40 T6 80
23/25 11.5/12.5
-50 -40 +55 T5 95
-50 -40 +85 T4 130
-50 N/A +120 T3 160
Ingress Protection IP66/67 to EN60529:1992
Area Classification Zones 0,1,2,20,21,22
Certification No. SIRA99ATEX3199, SIRA00ATEX3027U
IECExSIR06.0073U, IECExSIR06.0074
GOST-R POCC GB.Mл14.B00224
Ex e and Ex ia Terminal Boxes - Stainless Steel
Subject to modifications without notice
Pepperl+Fuchs Group
www.pepperl-fuchs.com
USA: +1 330 486 0002
pa-info@us.pepperl-fuchs.com pa-info@de.pepperl-fuchs.com
Singapore: +65 6779 9091
pa-info@sg.pepperl-fuchs.com
Copyright Pepperl+Fuchs
Germany: +49 621 776 222224
26. 1.2
500
463
426
535
560
282
300
215
222
D3
D1
D2
A
C D
B
RX22 - 300mm x 500mm x 160mm, RX23 - 300mm x 500mm x 200mm
All Dimensions in mm.
Material Box 1.5mm 316L, (1.4404) Stainless Steel
Finish Stainless Steel – electropolished
Weight Empty RX22 - 5.9Kg, RX23 - 6.5Kg
Cover Fixing M6 Stainless Steel hexagon head slotted screws
Gasket One piece fire resistant closed cell Neoprene for Ta
-40°C. One piece silicone rubber for Ta -50°C
Earthing 6mm brass internal/external earth stud as standard.
Optional earth stud welded to cover
Entries Direct through body
ENCLOSURE SPECIFICATION
WDU 2.5 WDU 4 WDU 6 WDU 10
RX22 Hori. Rail 2x88 2x72 2x53 2x42
RX23 Hori. Rail 2x88 2x72 2x53 2x42
A GUIDE TO PHYSICAL TERMINAL CAPACITY
Note: This is a guide to Physical Terminal Capacity only. Installers must ensure that the
maximum power dissipation given above is not exceeded
Gland Size mm 20 25 32
RX22 Side A + B 50 30 18
RX22 Side C + D 28 16 10
RX23 Side A + B 63 42 25
RX23 Side C + D 35 22 14
A GUIDE TO ENTRY CAPACITY
Material Product Codes
Ex e Terminal Box
Ex e U Component
Approved
Ex ia Terminal Box
Stainless RX2210 RX2220 RX2230
Stainless RX2310 RX2320 RX2330
ORDERING INFORMATION
Optional Extras
6mm earthing stud welded to cover CES6
Equipment mounting plate, same material as box RX22MP / RX23MP
10mm internal/external Stainless Steel earth stud SSET
Rain canopy RX22RC / RX23RC
Model D1 D2 D3
RX22 168.6 160 144.7
RX23 208.6 200 184.7
HAZARDOUS AREA SPECIFICATION
Marking to 94/9/EC II 2 GD II 1 GD
Type of Protection Ex e IIC T* Gb
Ex tb IIIC T**°C Db
Ex ia IIC T* Ga
Ex tb IIIC T**°C Da
Ambient Temp.°C
Gas
Temperature
Class (T*C)
Dust
Temperature
Class (T**)(°C)
Max Dissipation
(W)
Min Max II 1 G
II 2 G
II 2 GD
II 1 D
II 1 GDSilicone
Gasket
Neoprene
Gasket
-50 -40 +40 T6 80
26/28 13/14
-50 -40 +55 T5 95
-50 -40 +85 T4 130
-50 N/A +120 T3 160
Ingress Protection IP66/67 to EN60529:1992
Area Classification Zones 0,1,2,20,21,22
Certification No. SIRA99ATEX3199, SIRA00ATEX3027U
IECExSIR06.0073U, IECExSIR06.0074
GOST-R POCC GB.Mл14.B00224
Ex e and Ex ia Terminal Boxes - Stainless Steel
Subject to modifications without notice
Pepperl+Fuchs Group
www.pepperl-fuchs.com
USA: +1 330 486 0002
pa-info@us.pepperl-fuchs.com pa-info@de.pepperl-fuchs.com
Singapore: +65 6779 9091
pa-info@sg.pepperl-fuchs.com
Copyright Pepperl+Fuchs
Germany: +49 621 776 2222 25
27. 1.2
500
463
382
400
426
535
560
315
161
D3
D1
D2
A
C D
B
RX24 - 400mm x 500mm x 160mm, RX25 - 400mm x 500mm x 200mm
All Dimensions in mm.
Material Box 1.5mm 316L, (1.4404) Stainless Steel
Finish Stainless Steel – electropolished
Weight Empty RX24 - 7.2Kg, RX25 - 7.9Kg
Cover Fixing M6 Stainless Steel hexagon head slotted screws
Gasket One piece fire resistant closed cell Neoprene for Ta
-40°C. One piece silicone rubber for Ta -50°C
Earthing 6mm brass internal/external earth stud as standard.
Optional earth stud welded to cover
Entries Direct through body
ENCLOSURE SPECIFICATION
WDU 2.5 WDU 4 WDU 6 WDU 10
RX24 Hori. Rail 3x88 3x72 3x53 3x42
RX25 Hori. Rail 3x88 3x72 3x53 3x42
A GUIDE TO PHYSICAL TERMINAL CAPACITY
Note: This is a guide to Physical Terminal Capacity only. Installers must ensure that the
maximum power dissipation given above is not exceeded
Gland Size mm 20 25 32
RX24 Side A + B 50 30 18
RX24 Side C + D 40 22 14
RX25 Side A + B 63 42 25
RX25 Side C + D 50 32 20
A GUIDE TO ENTRY CAPACITY
Material Product Codes
Ex e Terminal Box
Ex e U Component
Approved
Ex ia Terminal Box
Stainless RX2410 RX2420 RX2430
Stainless RX2510 RX2520 RX2530
ORDERING INFORMATION
Optional Extras
6mm earthing stud welded to cover CES6
Equipment mounting plate, same material as box RX24MP / RX25MP
10mm internal/external Stainless Steel earth stud SSET
Rain canopy RX24RC / RX25RC
Model D1 D2 D3
RX24 168.6 160 144.7
RX25 208.6 200 184.7
HAZARDOUS AREA SPECIFICATION
Marking to 94/9/EC II 2 GD II 1 GD
Type of Protection Ex e IIC T* Gb
Ex tb IIIC T**°C Db
Ex ia IIC T* Ga
Ex tb IIIC T**°C Da
Ambient Temp.°C
Gas
Temperature
Class (T*C)
Dust
Temperature
Class (T**)(°C)
Max Dissipation
(W)
Min Max II 1 G
II 2 G
II 2 GD
II 1 D
II 1 GDSilicone
Gasket
Neoprene
Gasket
-50 -40 +40 T6 80
30/33 15/16.5
-50 -40 +55 T5 95
-50 -40 +85 T4 130
-50 N/A +120 T3 160
Ingress Protection IP66/67 to EN60529:1992
Area Classification Zones 0,1,2,20,21,22
Certification No. SIRA99ATEX3199, SIRA00ATEX3027U
IECExSIR06.0073U, IECExSIR06.0074
GOST-R POCC GB.Mл14.B00224
Ex e and Ex ia Terminal Boxes - Stainless Steel
Subject to modifications without notice
Pepperl+Fuchs Group
www.pepperl-fuchs.com
USA: +1 330 486 0002
pa-info@us.pepperl-fuchs.com pa-info@de.pepperl-fuchs.com
Singapore: +65 6779 9091
pa-info@sg.pepperl-fuchs.com
Copyright Pepperl+Fuchs
Germany: +49 621 776 222226
28. 1.2
600
563
526
635
660
182
200
115
122
D3
D1
D2
A
C D
B
RX26 - 200mm x 600mm x 120mm, RX27 - 200mm x 600mm x 160mm, RX28 - 200mm x 600mm x 200mm
All Dimensions in mm.
Material Box 1.5mm 316L, (1.4404) Stainless Steel
Finish Stainless Steel – electropolished
Weight Empty RX26 - 4.7Kg, RX27 - 5.3Kg, RX28 - 5.9Kg
Cover Fixing M6 Stainless Steel hexagon head slotted screws
Gasket One piece fire resistant closed cell Neoprene for Ta
-40°C. One piece silicone rubber for Ta -50°C
Earthing 6mm brass internal/external earth stud as standard.
Optional earth stud welded to cover
Entries Direct through body
ENCLOSURE SPECIFICATION
WDU 2.5 WDU 4 WDU 6 WDU 10
RX26 Hori. Rail 1x108 1x89 1x66 1x52
RX27 Hori. Rail 1x108 1x89 1x66 1x52
RX28 Hori. Rail 1x108 1x89 1x66 1x52
A GUIDE TO PHYSICAL TERMINAL CAPACITY
Note: This is a guide to Physical Terminal Capacity only. Installers must ensure that the
maximum power dissipation given above is not exceeded
Gland Size mm 20 25 32
RX26 Side A + B 38 26 15
RX26 Side C + D 11 8 4
RX27 Side A + B 62 36 20
RX27 Side C + D 16 10 6
RX28 Side A + B 78 52 30
RX28 Side C + D 20 14 8
A GUIDE TO ENTRY CAPACITY
Material Product Codes
Ex e Terminal Box
Ex e U Component
Approved
Ex ia Terminal Box
Stainless RX2610 RX2620 RX2630
Stainless RX2710 RX2720 RX2730
Stainless RX2810 RX2820 RX2830
ORDERING INFORMATION
Optional Extras
6mm earthing stud welded to cover CES6
Equipment mounting plate, same material as box RX26MP / RX27MP / RX28MP
10mm internal/external Stainless Steel earth stud SSET
Rain canopy RX26RC / RX27RC / RX28RC
Model D1 D2 D3
RX26 128.6 120 104.7
RX27 168.6 160 144.7
RX28 208.6 200 184.7
HAZARDOUS AREA SPECIFICATION
Marking to 94/9/EC II 2 GD II 1 GD
Type of Protection Ex e IIC T* Gb
Ex tb IIIC T**°C Db
Ex ia IIC T* Ga
Ex tb IIIC T**°C Da
Ambient Temp.°C
Gas
Temperature
Class (T*C)
Dust
Temperature
Class (T**)(°C)
Max Dissipation
(W)
Min Max II 1 G
II 2 G
II 2 GD
II 1 D
II 1 GDSilicone
Gasket
Neoprene
Gasket
-50 -40 +40 T6 80
22/24/26 11/12/13
-50 -40 +55 T5 95
-50 -40 +85 T4 130
-50 N/A +120 T3 160
Ingress Protection IP66/67 to EN60529:1992
Area Classification Zones 0,1,2,20,21,22
Certification No. SIRA99ATEX3199, SIRA00ATEX3027U
IECExSIR06.0073U, IECExSIR06.0074
GOST-R POCC GB.Mл14.B00224
Ex e and Ex ia Terminal Boxes - Stainless Steel
Subject to modifications without notice
Pepperl+Fuchs Group
www.pepperl-fuchs.com
USA: +1 330 486 0002
pa-info@us.pepperl-fuchs.com pa-info@de.pepperl-fuchs.com
Singapore: +65 6779 9091
pa-info@sg.pepperl-fuchs.com
Copyright Pepperl+Fuchs
Germany: +49 621 776 2222 27
29. 1.2
600
563
382
400
526
635
660
315
185
208.60
200
161
A
C D
B
RX29 - 400mm x 600mm x 200mm
Gland Size mm 20 25 32
Side A + B 78 52 30
Side C + D 50 32 20
A GUIDE TO ENTRY CAPACITY
All Dimensions in mm.
Material Product Codes
Ex e Terminal Box
Ex e U Component
Approved
Ex ia Terminal Box
Stainless RX2910 RX2920 RX2930
ORDERING INFORMATION
Optional Extras
6mm earthing stud welded to cover CES6
Equipment mounting plate, same material as box RX29MP
10mm internal/external Stainless Steel earth stud SSET
Rain canopy RX29RC
Material Box 1.5mm 316L, (1.4404) Stainless Steel
Finish Stainless Steel – electropolished
Weight Empty 9.1Kg
Cover Fixing M6 Stainless Steel hexagon head slotted screws
Gasket One piece fire resistant closed cell Neoprene for Ta
-40°C. One piece silicone rubber for Ta -50°C
Earthing 6mm brass internal/external earth stud as standard.
Optional earth stud welded to cover
Entries Direct through body
ENCLOSURE SPECIFICATION
WDU 2.5 WDU 4 WDU 6 WDU 10
Horizontal Rail 5x108 5x89 5x66 5x52
A GUIDE TO PHYSICAL TERMINAL CAPACITY
Note: This is a guide to Physical Terminal Capacity only. Installers must ensure that the
maximum power dissipation given above is not exceeded
HAZARDOUS AREA SPECIFICATION
Marking to 94/9/EC II 2 GD II 1 GD
Type of Protection Ex e IIC T* Gb
Ex tb IIIC T**°C Db
Ex ia IIC T* Ga
Ex tb IIIC T**°C Da
Ambient Temp.°C
Gas
Temperature
Class (T*C)
Dust
Temperature
Class (T**)(°C)
Max Dissipation
(W)
Min Max II 1 G
II 2 G
II 2 GD
II 1 D
II 1 GDSilicone
Gasket
Neoprene
Gasket
-50 -40 +40 T6 80
37 18.5
-50 -40 +55 T5 95
-50 -40 +85 T4 130
-50 N/A +120 T3 160
Ingress Protection IP66/67 to EN60529:1992
Area Classification Zones 0,1,2,20,21,22
Certification No. SIRA99ATEX3199, SIRA00ATEX3027U
IECExSIR06.0073U, IECExSIR06.0074
GOST-R POCC GB.Mл14.B00224
Ex e and Ex ia Terminal Boxes - Stainless Steel
Subject to modifications without notice
Pepperl+Fuchs Group
www.pepperl-fuchs.com
USA: +1 330 486 0002
pa-info@us.pepperl-fuchs.com pa-info@de.pepperl-fuchs.com
Singapore: +65 6779 9091
pa-info@sg.pepperl-fuchs.com
Copyright Pepperl+Fuchs
Germany: +49 621 776 222228
30. 1.2
600
563
526
635
660
582
600
515
261
185
208.60
200
A
C D
B
RX30 - 600mm x 600mm x 200mm
WDU 2.5 WDU 4 WDU 6 WDU 10
Horizontal Rail 5x108 5x89 5x66 5x52
A GUIDE TO PHYSICAL TERMINAL CAPACITY
Note: This is a guide to Physical Terminal Capacity only. Installers must ensure that the
maximum power dissipation given above is not exceeded
Gland Size mm 20 25 32
Side A + B 78 52 30
Side C + D 78 52 30
A GUIDE TO ENTRY CAPACITY
All Dimensions in mm.
Material Product Codes
Ex e Terminal Box
Ex e U Component
Approved
Ex ia Terminal Box
Stainless RX3010 RX3020 RX3030
ORDERING INFORMATION
Optional Extras
6mm earthing stud welded to cover CES6
Equipment mounting plate, same material as box RX30MP
10mm internal/external Stainless Steel earth stud SSET
Rain canopy RX30RC
Material Box 1.5mm 316L, (1.4404) Stainless Steel
Finish Stainless Steel – electropolished
Weight Empty 12.2Kg
Cover Fixing M6 Stainless Steel hexagon head slotted screws
Gasket One piece fire resistant closed cell Neoprene for Ta
-40°C. One piece silicone rubber for Ta -50°C
Earthing 6mm brass internal/external earth stud as standard.
Optional earth stud welded to cover
Entries Direct through body
ENCLOSURE SPECIFICATION
HAZARDOUS AREA SPECIFICATION
Marking to 94/9/EC II 2 GD II 1 GD
Type of Protection Ex e IIC T* Gb
Ex tb IIIC T**°C Db
Ex ia IIC T* Ga
Ex tb IIIC T**°C Da
Ambient Temp.°C
Gas
Temperature
Class (T*C)
Dust
Temperature
Class (T**)(°C)
Max Dissipation
(W)
Min Max II 1 G
II 2 G
II 2 GD
II 1 D
II 1 GDSilicone
Gasket
Neoprene
Gasket
-50 -40 +40 T6 80
47 23.5
-50 -40 +55 T5 95
-50 -40 +85 T4 130
-50 N/A +120 T3 160
Ingress Protection IP66/67 to EN60529:1992
Area Classification Zones 0,1,2,20,21,22
Certification No. SIRA99ATEX3199, SIRA00ATEX3027U
IECExSIR06.0073U, IECExSIR06.0074
GOST-R POCC GB.Mл14.B00224
Ex e and Ex ia Terminal Boxes - Stainless Steel
Subject to modifications without notice
Pepperl+Fuchs Group
www.pepperl-fuchs.com
USA: +1 330 486 0002
pa-info@us.pepperl-fuchs.com pa-info@de.pepperl-fuchs.com
Singapore: +65 6779 9091
pa-info@sg.pepperl-fuchs.com
Copyright Pepperl+Fuchs
Germany: +49 621 776 2222 29
31. Subject to modifications without notice
Pepperl+Fuchs Group
www.pepperl-fuchs.com
USA: +1 330 486 0002
pa-info@us.pepperl-fuchs.com pa-info@de.pepperl-fuchs.com
Singapore: +65 6779 9091
pa-info@sg.pepperl-fuchs.com
Copyright Pepperl+Fuchs
Germany: +49 621 776 222230
Notes
33. Ex e and Ex ia Terminal Boxes - Stainless and Mild Steel
Subject to modifications without notice
Pepperl+Fuchs Group
www.pepperl-fuchs.com
USA: +1 330 486 0002
pa-info@us.pepperl-fuchs.com pa-info@de.pepperl-fuchs.com
Singapore: +65 6779 9091
pa-info@sg.pepperl-fuchs.com
Copyright Pepperl+Fuchs
Germany: +49 621 776 222232
FXL1 - 229mm x 152mm x 145mm
Material Box 1.5mm 316L, (1.4404) Stainless Steel
or Mild Steel (CR4)
Material gland plate 3mm 316L, (1.4404) Stainless Steel
or Mild Steel (CR4)
Finish Stainless Steel – electropolished
Mild Steel – Powder coated RAL 7032
Weight Empty 4.3Kg (4 Gland Plate Box)
Cover Fixing Fully detachable hinged cover with captive M6
Stainless Steel hexagon head slotted screws
Gasket One piece fire resistant closed cell Neoprene for Ta
-40°C. One piece silicone rubber for Ta -50°C
Earthing 10mm brass internal/external earth stud as
standard. Optional earth stud welded to cover.
Optional earth stud welded to gland plate
Entries Via gland plates 1- 4 or direct through body
ENCLOSURE SPECIFICATION
WDU 2.5 WDU 4 WDU 6 WDU 10
Verticle Rail 1x33 1x27 1x20 1x15
Horizontal Rail 1x19 1x15 1x11 1x8
A GUIDE TO PHYSICAL TERMINAL CAPACITY
Note: This is a guide to Physical Terminal Capacity only. Installers must ensure that the
maximum power dissipation given above is not exceeded
Gland Size mm 20 25 32
Side A + B 3 2 2
Side C + D 3 2 2
A GUIDE TO ENTRY CAPACITY FOR GLAND PLATES*
* More entries are available if direct entry is used
Return Flange
Sealing
202
86
152
227
62 58
182
154
229
12758
109
145
11
108
108
All Dimensions in mm.
ORDERING INFORMATION
Material Gland Plate Options Product Codes
Number Location Ex e Terminal Box
Ex e U Component
Approved
Ex ia Terminal Box
Stainless 0 - FXLS110 FXLS120 FXLS130
Mild Steel 0 - FXLM110 FXLM120 FXLM130
Stainless 1 B FXLS111 FXLS121 FXLS131
Mild Steel 1 B FXLM111 FXLM121 FXLM131
Stainless 2 AB FXLS112 FXLS122 FXLS132
Mild Steel 2 AB FXLM112 FXLM122 FXLM132
Stainless 3 BCD FXLS113 FXLS123 FXLS133
Mild Steel 3 BCD FXLM113 FXLM123 FXLM133
Stainless 4 ABCD FXLS114 FXLS124 FXLS134
Mild Steel 4 ABCD FXLM114 FXLM124 FXLM134
Optional Extras
6mm stainless steel earthing stud welded to cover CES6
Equipment mounting plate, same material as box FXL1MP
10mm internal/external Stainless Steel earth stud SSET
6mm earthing stud welded to gland plate, same material as box GPS6
Rain canopy, same material as box FXL1RC
Document wallet, same material as box FXL1DW
HAZARDOUS AREA SPECIFICATION
Marking to 94/9/EC II 2 GD II 1 GD
Type of Protection Ex e IIC T* Gb
Ex tb IIIC T**°C Db
Ex ia IIC T* Ga
Ex tb IIIC T**°C Da
Ambient Temp.°C
Gas
Temperature
Class (T*C)
Dust
Temperature
Class (T**)(°C)
Max Dissipation
(W)
Min Max II 1 G
II 2 G
II 2 GD
II 1 D
II 1 GDSilicone
Gasket
Neoprene
Gasket
-50 -40 +40 T6 80
15 7.5
-50 -40 +55 T5 95
-50 -40 +85 T4 130
-50 N/A +120 T3 160
Ingress Protection IP66 to EN60529:1992
Area Classification Zones 0,1,2,20,21,22
Certification No. SIRA99ATEX3199, SIRA00ATEX3027U
IECExSIR06.0073U, IECExSIR06.0074
GOST-R POCC GB.Mл14.B00224
34. Ex e and Ex ia Terminal Boxes - Stainless and Mild Steel
Subject to modifications without notice
Pepperl+Fuchs Group
www.pepperl-fuchs.com
USA: +1 330 486 0002
pa-info@us.pepperl-fuchs.com pa-info@de.pepperl-fuchs.com
Singapore: +65 6779 9091
pa-info@sg.pepperl-fuchs.com
Copyright Pepperl+Fuchs
Germany: +49 621 776 2222 33
Material Box 1.5mm 316L, (1.4404) Stainless Steel
or Mild Steel (CR4)
Material gland plate 3mm 316L, (1.4404) Stainless Steel
or Mild Steel (CR4)
Finish Stainless Steel – electropolished
Mild Steel – Powder coated RAL 7032
Weight Empty 6.9Kg (4 Gland Plate Box)
Cover Fixing Fully detachable hinged cover with captive M6
Stainless Steel hexagon head slotted screws
Gasket One piece fire resistant closed cell Neoprene for Ta
-40°C. One piece silicone rubber for Ta -50°C
Earthing 10mm brass internal/external earth stud as
standard. Optional earth stud welded to cover.
Optional earth stud welded to gland plate
Entries Via gland plates 1- 4 or direct through body
ENCLOSURE SPECIFICATION
Return Flange
Sealing
310
179
194
260
335
80/130
182
213
185
260
80/130
129/179
11
146
165/215
215
FXL2 - 260mm x 260mm x 165/215mm
WDU 2.5 WDU 4 WDU 6 WDU 10
Verticle Rail 2x48 2x39 2x29 2x22
Horizontal Rail 2x48 2x39 2x29 2x22
A GUIDE TO PHYSICAL TERMINAL CAPACITY
Note: This is a guide to Physical Terminal Capacity only. Installers must ensure that the
maximum power dissipation given above is not exceeded
A GUIDE TO ENTRY CAPACITY FOR GLAND PLATES*
Enclosure Size FXL2 FXL2D
Gland Size mm 20 25 32 20 25 32
Side A + B 12 9 4 22 15 8
Side C + D 8 6 3 14 9 5
* More entries are available if direct entry is used
All Dimensions in mm.
Material Gland Plate Options Product Codes (Standard) Product Codes (Deep)
Number Location Ex e Terminal Box
Ex e U Component
Approved
Ex ia Terminal Box Ex e Terminal Box
Ex e U Component
Approved
Ex ia Terminal Box
Stainless 0 - FXLS210 FXLS220 FXLS230 FXLS210D FXLS220D FXLS230D
Mild Steel 0 - FXLM210 FXLM220 FXLM230 FXLM210D FXLM220D FXLM230D
Stainless 1 B FXLS211 FXLS221 FXLS231 FXLS211D FXLS221D FXLS231D
Mild Steel 1 B FXLM211 FXLM221 FXLM231 FXLM211D FXLM221D FXLM231D
Stainless 2 AB FXLS212 FXLS222 FXLS232 FXLS212D FXLS222D FXLS232D
Mild Steel 2 AB FXLM212 FXLM222 FXLM232 FXLM212D FXLM222D FXLM232D
Stainless 3 BCD FXLS213 FXLS223 FXLS233 FXLS213D FXLS223D FXLS233D
Mild Steel 3 BCD FXLM213 FXLM223 FXLM233 FXLM213D FXLM223D FXLM233D
Stainless 4 ABCD FXLS214 FXLS224 FXLS234 FXLS214D FXLS224D FXLS234D
Mild Steel 4 ABCD FXLM214 FXLM224 FXLM234 FXLM214D FXLM224D FXLM234D
ORDERING INFORMATION
Optional Extras
6mm stainless steel earthing stud welded to cover CES6 6mm earthing stud welded to gland plate, same material as box GPS6
Equipment mounting plate, same material as box FXL2MP Rain canopy, same material as box FXL2RC
10mm internal/external Stainless Steel earth stud SSET Document wallet, same material as box FXL2DW
HAZARDOUS AREA SPECIFICATION
Marking to 94/9/EC II 2 GD II 1 GD
Type of Protection Ex e IIC T* Gb
Ex tb IIIC T**°C Db
Ex ia IIC T* Ga
Ex tb IIIC T**°C Da
Ambient Temp.°C
Gas
Temperature
Class (T*C)
Dust
Temperature
Class (T**)(°C)
Max Dissipation
(W)
Min Max II 1 G
II 2 G
II 2 GD
II 1 D
II 1 GDSilicone
Gasket
Neoprene
Gasket
-50 -40 +40 T6 80
15 7.5
-50 -40 +55 T5 95
-50 -40 +85 T4 130
-50 N/A +120 T3 160
Ingress Protection IP66 to EN60529:1992
Area Classification Zones 0,1,2,20,21,22
Certification No. SIRA99ATEX3199, SIRA00ATEX3027U
IECExSIR06.0073U, IECExSIR06.0074
GOST-R POCC GB.Mл14.B00224
35. Ex e and Ex ia Terminal Boxes - Stainless and Mild Steel
Subject to modifications without notice
Pepperl+Fuchs Group
www.pepperl-fuchs.com
USA: +1 330 486 0002
pa-info@us.pepperl-fuchs.com pa-info@de.pepperl-fuchs.com
Singapore: +65 6779 9091
pa-info@sg.pepperl-fuchs.com
Copyright Pepperl+Fuchs
Germany: +49 621 776 222234
FXL3 - 306mm x 306mm x 165/215mm
Material Gland Plate Options Product Codes (Standard) Product Codes (Deep)
Number Location Ex e Terminal Box
Ex e U Component
Approved
Ex ia Terminal Box Ex e Terminal Box
Ex e U Component
Approved
Ex ia Terminal Box
Stainless 0 - FXLS310 FXLS320 FXLS330 FXLS310D FXLS320D FXLS330D
Mild Steel 0 - FXLM310 FXLM320 FXLM330 FXLM310D FXLM320D FXLM330D
Stainless 1 B FXLS311 FXLS321 FXLS331 FXLS311D FXLS321D FXLS331D
Mild Steel 1 B FXLM311 FXLM321 FXLM331 FXLM311D FXLM321D FXLM331D
Stainless 2 AB FXLS312 FXLS322 FXLS332 FXLS312D FXLS322D FXLS332D
Mild Steel 2 AB FXLM312 FXLM322 FXLM332 FXLM312D FXLM322D FXLM332D
Stainless 3 BCD FXLS313 FXLS323 FXLS333 FXLS313D FXLS323D FXLS333D
Mild Steel 3 BCD FXLM313 FXLM323 FXLM333 FXLM313D FXLM323D FXLM333D
Stainless 4 ABCD FXLS314 FXLS324 FXLS334 FXLS314D FXLS324D FXLS334D
Mild Steel 4 ABCD FXLM314 FXLM324 FXLM334 FXLM314D FXLM324D FXLM334D
ORDERING INFORMATION
Optional Extras
6mm stainless steel earthing stud welded to cover CES6 6mm earthing stud welded to gland plate, same material as box GPS6
Equipment mounting plate, same material as box FXL3MP Rain canopy, same material as box FXL3RC
10mm internal/external Stainless Steel earth stud SSET Document wallet, same material as box FXL3DW
A GUIDE TO ENTRY CAPACITY FOR GLAND PLATES*
Enclosure Size FXL3 FXL3D
Gland Size mm 20 25 32 20 25 32
Side A + B 14 11 5 26 18 9
Side C + D 10 7 4 18 12 6
* More entries are available if direct entry is used
WDU 2.5 WDU 4 WDU 6 WDU 10
Verticle Rail 2x48 2x39 2x29 2x22
Horizontal Rail 2x48 2x39 2x29 2x22
A GUIDE TO PHYSICAL TERMINAL CAPACITY
Note: This is a guide to Physical Terminal Capacity only. Installers must ensure that the
maximum power dissipation given above is not exceeded
Material Box 1.5mm 316L, (1.4404) Stainless Steel
or Mild Steel (CR4)
Material gland plate 3mm 316L, (1.4404) Stainless Steel
or Mild Steel (CR4)
Finish Stainless Steel – electropolished
Mild Steel – Powder coated RAL 7032
Weight Empty 8.5Kg (4 Gland Plate Box)
Cover Fixing Fully detachable hinged cover with captive M6
Stainless Steel hexagon head slotted screws
Gasket One piece fire resistant closed cell Neoprene for Ta
-40°C. One piece silicone rubber for Ta -50°C
Earthing 10mm brass internal/external earth stud as
standard. Optional earth stud welded to cover.
Optional earth stud welded to gland plate
Entries Via gland plates 1- 4 or direct through body
ENCLOSURE SPECIFICATION
Return Flange
Sealing
356
225
240
306
381
80/130
228
259
231
306
80/130
129/179
185
11
165/215
261
All Dimensions in mm.
HAZARDOUS AREA SPECIFICATION
Marking to 94/9/EC II 2 GD II 1 GD
Type of Protection Ex e IIC T* Gb
Ex tb IIIC T**°C Db
Ex ia IIC T* Ga
Ex tb IIIC T**°C Da
Ambient Temp.°C
Gas
Temperature
Class (T*C)
Dust
Temperature
Class (T**)(°C)
Max Dissipation
(W)
Min Max II 1 G
II 2 G
II 2 GD
II 1 D
II 1 GDSilicone
Gasket
Neoprene
Gasket
-50 -40 +40 T6 80
21 10.5
-50 -40 +55 T5 95
-50 -40 +85 T4 130
-50 N/A +120 T3 160
Ingress Protection IP66 to EN60529:1992
Area Classification Zones 0,1,2,20,21,22
Certification No. SIRA99ATEX3199, SIRA00ATEX3027U
IECExSIR06.0073U, IECExSIR06.0074
GOST-R POCC GB.Mл14.B00224
36. Ex e and Ex ia Terminal Boxes - Stainless and Mild Steel
Subject to modifications without notice
Pepperl+Fuchs Group
www.pepperl-fuchs.com
USA: +1 330 486 0002
pa-info@us.pepperl-fuchs.com pa-info@de.pepperl-fuchs.com
Singapore: +65 6779 9091
pa-info@sg.pepperl-fuchs.com
Copyright Pepperl+Fuchs
Germany: +49 621 776 2222 35
Return Flange
Sealing
310
179
194
260
335
80/130
302
333
305
380
80/130
129/179
11
165/215
229
215
All Dimensions in mm.
FXL4 - 380mm x 260mm x 165/215mm
Material Box 1.5mm 316L, (1.4404) Stainless Steel
or Mild Steel (CR4)
Material gland plate 3mm 316L, (1.4404) Stainless Steel
or Mild Steel (CR4)
Finish Stainless Steel – electropolished
Mild Steel – Powder coated RAL 7032
Weight Empty 8.8Kg (4 Gland Plate Box)
Cover Fixing Fully detachable hinged cover with captive M6
Stainless Steel hexagon head slotted screws
Gasket One piece fire resistant closed cell Neoprene for Ta
-40°C. One piece silicone rubber for Ta -50°C
Earthing 10mm brass internal/external earth stud as
standard. Optional earth stud welded to cover.
Optional earth stud welded to gland plate
Entries Via gland plates 1- 4 or direct through body
ENCLOSURE SPECIFICATION
Optional Extras
6mm stainless steel earthing stud welded to cover CES6 6mm earthing stud welded to gland plate, same material as box GPS6
Equipment mounting plate, same material as box FXL4MP Rain canopy, same material as box FXL4RC
10mm internal/external Stainless Steel earth stud SSET Document wallet, same material as box FXL4DW
ORDERING INFORMATION
Material Gland Plate Options Product Codes (Standard) Product Codes (Deep)
Number Location Ex e Terminal Box
Ex e U Component
Approved
Ex ia Terminal Box Ex e Terminal Box
Ex e U Component
Approved
Ex ia Terminal Box
Stainless 0 - FXLS410 FXLS420 FXLS430 FXLS410D FXLS420D FXLS430D
Mild Steel 0 - FXLM410 FXLM420 FXLM430 FXLM410D FXLM420D FXLM430D
Stainless 1 B FXLS411 FXLS421 FXLS431 FXLS411D FXLS421D FXLS431D
Mild Steel 1 B FXLM411 FXLM421 FXLM431 FXLM411D FXLM421D FXLM431D
Stainless 2 AB FXLS412 FXLS422 FXLS432 FXLS412D FXLS422D FXLS432D
Mild Steel 2 AB FXLM412 FXLM422 FXLM432 FXLM412D FXLM422D FXLM432D
Stainless 3 BCD FXLS413 FXLS423 FXLS433 FXLS413D FXLS423D FXLS433D
Mild Steel 3 BCD FXLM413 FXLM423 FXLM433 FXLM413D FXLM423D FXLM433D
Stainless 4 ABCD FXLS414 FXLS424 FXLS434 FXLS414D FXLS424D FXLS434D
Mild Steel 4 ABCD FXLM414 FXLM424 FXLM434 FXLM414D FXLM424D FXLM434D
A GUIDE TO ENTRY CAPACITY FOR GLAND PLATES*
Enclosure Size FXL4 FXL4D
Gland Size mm 20 25 32 20 25 32
Side A + B 12 9 4 22 15 8
Side C + D 12 10 5 24 15 9
* More entries are available if direct entry is used
WDU 2.5 WDU 4 WDU 6 WDU 10
Verticle Rail 2x57 2x46 2x34 2x27
Horizontal Rail 2x40 2x33 2x24 2x19
A GUIDE TO PHYSICAL TERMINAL CAPACITY
Note: This is a guide to Physical Terminal Capacity only. Installers must ensure that the
maximum power dissipation given above is not exceeded
HAZARDOUS AREA SPECIFICATION
Marking to 94/9/EC II 2 GD II 1 GD
Type of Protection Ex e IIC T* Gb
Ex tb IIIC T**°C Db
Ex ia IIC T* Ga
Ex tb IIIC T**°C Da
Ambient Temp.°C
Gas
Temperature
Class (T*C)
Dust
Temperature
Class (T**)(°C)
Max Dissipation
(W)
Min Max II 1 G
II 2 G
II 2 GD
II 1 D
II 1 GDSilicone
Gasket
Neoprene
Gasket
-50 -40 +40 T6 80
21 10.5
-50 -40 +55 T5 95
-50 -40 +85 T4 130
-50 N/A +120 T3 160
Ingress Protection IP66 to EN60529:1992
Area Classification Zones 0,1,2,20,21,22
Certification No. SIRA99ATEX3199, SIRA00ATEX3027U
IECExSIR06.0073U, IECExSIR06.0074
GOST-R POCC GB.Mл14.B00224
37. Ex e and Ex ia Terminal Boxes - Stainless and Mild Steel
Subject to modifications without notice
Pepperl+Fuchs Group
www.pepperl-fuchs.com
USA: +1 330 486 0002
pa-info@us.pepperl-fuchs.com pa-info@de.pepperl-fuchs.com
Singapore: +65 6779 9091
pa-info@sg.pepperl-fuchs.com
Copyright Pepperl+Fuchs
Germany: +49 621 776 222236
Material Box 316L, (1.4404) Stainless Steel or Mild Steel (CR4).
1.5mm as standard or 2mm option
Material gland plate 3mm 316L, (1.4404) Stainless Steel
or Mild Steel (CR4)
Finish Stainless Steel – electropolished
Mild Steel – Powder coated RAL 7032
Weight Empty 13Kg (4 Gland Plate Box)
Cover Fixing Fully detachable hinged cover with captive M6
Stainless Steel hexagon head slotted screws
Gasket One piece fire resistant closed cell Neoprene for Ta
-40°C. One piece silicone rubber for Ta -50°C
Earthing 10mm brass internal/external earth stud as
standard. Optional earth stud welded to cover.
Optional earth stud welded to gland plate
Entries Via gland plates 1- 4 or direct through body
ENCLOSURE SPECIFICATION
Return Flange
Sealing
432
301
316
382
457
80/130
380
411
383
458
80/130
129/179
337
11
165/215
337
All Dimensions in mm.
FXL5 - 458mm x 382mm x 165/215mm
Optional Extras
6mm stainless steel earthing stud welded to cover CES6 6mm earthing stud welded to gland plate, same material as box GPS6
Equipment mounting plate, same material as box FXL5MP Rain canopy, same material as box FXL5RC
10mm internal/external Stainless Steel earth stud SSET Document wallet, same material as box FXL5DW
ORDERING INFORMATION
Material Gland Plate Options Product Codes (Standard) Product Codes (Deep)
Number Location Ex e Terminal Box
Ex e U Component
Approved
Ex ia Terminal Box Ex e Terminal Box
Ex e U Component
Approved
Ex ia Terminal Box
Stainless 0 - FXLS510 FXLS520 FXLS530 FXLS510D FXLS520D FXLS530D
Mild Steel 0 - FXLM510 FXLM520 FXLM530 FXLM510D FXLM520D FXLM530D
Stainless 1 B FXLS511 FXLS521 FXLS531 FXLS511D FXLS521D FXLS531D
Mild Steel 1 B FXLM511 FXLM521 FXLM531 FXLM511D FXLM521D FXLM531D
Stainless 2 AB FXLS512 FXLS522 FXLS532 FXLS512D FXLS522D FXLS532D
Mild Steel 2 AB FXLM512 FXLM522 FXLM532 FXLM512D FXLM522D FXLM532D
Stainless 3 BCD FXLS513 FXLS523 FXLS533 FXLS513D FXLS523D FXLS533D
Mild Steel 3 BCD FXLM513 FXLM523 FXLM533 FXLM513D FXLM523D FXLM533D
Stainless 4 ABCD FXLS514 FXLS524 FXLS534 FXLS514D FXLS524D FXLS534D
Mild Steel 4 ABCD FXLM514 FXLM524 FXLM534 FXLM514D FXLM524D FXLM534D
A GUIDE TO ENTRY CAPACITY FOR GLAND PLATES*
Enclosure Size FXL5 FXL5D
Gland Size mm 20 25 32 20 25 32
Side A + B 18 15 7 36 24 14
Side C + D 18 15 7 36 24 14
* More entries are available if direct entry is used
WDU 2.5 WDU 4 WDU 6 WDU 10
Verticle Rail 3x76 3x63 3x47 3x37
Horizontal Rail 3x62 3x52 3x38 3x31
A GUIDE TO PHYSICAL TERMINAL CAPACITY
Note: This is a guide to Physical Terminal Capacity only. Installers must ensure that the
maximum power dissipation given above is not exceeded
HAZARDOUS AREA SPECIFICATION
Marking to 94/9/EC II 2 GD II 1 GD
Type of Protection Ex e IIC T* Gb
Ex tb IIIC T**°C Db
Ex ia IIC T* Ga
Ex tb IIIC T**°C Da
Ambient Temp.°C
Gas
Temperature
Class (T*C)
Dust
Temperature
Class (T**)(°C)
Max Dissipation
(W)
Min Max II 1 G
II 2 G
II 2 GD
II 1 D
II 1 GDSilicone
Gasket
Neoprene
Gasket
-50 -40 +40 T6 80
29 14.5
-50 -40 +55 T5 95
-50 -40 +85 T4 130
-50 N/A +120 T3 160
Ingress Protection IP66 to EN60529:1992
Area Classification Zones 0,1,2,20,21,22
Certification No. SIRA99ATEX3199, SIRA00ATEX3027U
IECExSIR06.0073U, IECExSIR06.0074
GOST-R POCC GB.Mл14.B00224
38. Ex e and Ex ia Terminal Boxes - Stainless and Mild Steel
Subject to modifications without notice
Pepperl+Fuchs Group
www.pepperl-fuchs.com
USA: +1 330 486 0002
pa-info@us.pepperl-fuchs.com pa-info@de.pepperl-fuchs.com
Singapore: +65 6779 9091
pa-info@sg.pepperl-fuchs.com
Copyright Pepperl+Fuchs
Germany: +49 621 776 2222 37
Return Flange
Sealing
530
399
414
480
555
80/130
359
402
433
405
480
80/130
129/179
435
165/215
11
All Dimensions in mm.
Material Box 316L, (1.4404) Stainless Steel or Mild Steel (CR4).
1.5mm as standard or 2mm option
Material gland plate 3mm 316L, (1.4404) Stainless Steel
or Mild Steel (CR4)
Finish Stainless Steel – electropolished
Mild Steel – Powder coated RAL 7032
Weight Empty 15Kg (4 Gland Plate Box)
Cover Fixing Fully detachable hinged cover with captive M6
Stainless Steel hexagon head slotted screws
Gasket One piece fire resistant closed cell Neoprene for Ta
-40°C. One piece silicone rubber for Ta -50°C
Earthing 10mm brass internal/external earth stud as
standard. Optional earth stud welded to cover.
Optional earth stud welded to gland plate
Entries Via gland plates 1- 4 or direct through body
ENCLOSURE SPECIFICATION
FXL6 - 480mm x 480mm x 165/215mm
ORDERING INFORMATION
Material Gland Plate Options Product Codes (Standard) Product Codes (Deep)
Number Location Ex e Terminal Box
Ex e U Component
Approved
Ex ia Terminal Box Ex e Terminal Box
Ex e U Component
Approved
Ex ia Terminal Box
Stainless 0 - FXLS610 FXLS620 FXLS630 FXLS610D FXLS620D FXLS630D
Mild Steel 0 - FXLM610 FXLM620 FXLM630 FXLM610D FXLM620D FXLM630D
Stainless 1 B FXLS611 FXLS621 FXLS631 FXLS611D FXLS621D FXLS631D
Mild Steel 1 B FXLM611 FXLM621 FXLM631 FXLM611D FXLM621D FXLM631D
Stainless 2 AB FXLS612 FXLS622 FXLS632 FXLS612D FXLS622D FXLS632D
Mild Steel 2 AB FXLM612 FXLM622 FXLM632 FXLM612D FXLM622D FXLM632D
Stainless 3 BCD FXLS613 FXLS623 FXLS633 FXLS613D FXLS623D FXLS633D
Mild Steel 3 BCD FXLM613 FXLM623 FXLM633 FXLM613D FXLM623D FXLM633D
Stainless 4 ABCD FXLS614 FXLS624 FXLS634 FXLS614D FXLS624D FXLS634D
Mild Steel 4 ABCD FXLM614 FXLM624 FXLM634 FXLM614D FXLM624D FXLM634D
A GUIDE TO ENTRY CAPACITY FOR GLAND PLATES*
Enclosure Size FXL6 FXL6D
Gland Size mm 20 25 32 20 25 32
Side A + B 24 19 9 43 30 17
Side C + D 19 16 7 38 24 14
* More entries are available if direct entry is used
WDU 2.5 WDU 4 WDU 6 WDU 10
Verticle Rail 4x81 4x67 4x50 4x39
Horizontal Rail 4x81 4x67 4x50 4x39
A GUIDE TO PHYSICAL TERMINAL CAPACITY
Note: This is a guide to Physical Terminal Capacity only. Installers must ensure that the
maximum power dissipation given above is not exceeded
HAZARDOUS AREA SPECIFICATION
Marking to 94/9/EC II 2 GD II 1 GD
Type of Protection Ex e IIC T* Gb
Ex tb IIIC T**°C Db
Ex ia IIC T* Ga
Ex tb IIIC T**°C Da
Ambient Temp.°C
Gas
Temperature
Class (T*C)
Dust
Temperature
Class (T**)(°C)
Max Dissipation
(W)
Min Max II 1 G
II 2 G
II 2 GD
II 1 D
II 1 GDSilicone
Gasket
Neoprene
Gasket
-50 -40 +40 T6 80
30 15
-50 -40 +55 T5 95
-50 -40 +85 T4 130
-50 N/A +120 T3 160
Ingress Protection IP66 to EN60529:1992
Area Classification Zones 0,1,2,20,21,22
Certification No. SIRA99ATEX3199, SIRA00ATEX3027U
IECExSIR06.0073U, IECExSIR06.0074
GOST-R POCC GB.Mл14.B00224
Optional Extras
6mm stainless steel earthing stud welded to cover CES6 6mm earthing stud welded to gland plate, same material as box GPS6
Equipment mounting plate, same material as box FXL6MP Rain canopy, same material as box FXL6RC
10mm internal/external Stainless Steel earth stud SSET Document wallet, same material as box FXL6DW
39. Ex e and Ex ia Terminal Boxes - Stainless and Mild Steel
Subject to modifications without notice
Pepperl+Fuchs Group
www.pepperl-fuchs.com
USA: +1 330 486 0002
pa-info@us.pepperl-fuchs.com pa-info@de.pepperl-fuchs.com
Singapore: +65 6779 9091
pa-info@sg.pepperl-fuchs.com
Copyright Pepperl+Fuchs
Germany: +49 621 776 222238
Return Flange
Sealing
400
269
284
350
425
80/130
422
453
425
500
80/130
129/179
305
11
165/215
379
All Dimensions in mm.
Material Box 316L, (1.4404) Stainless Steel or Mild Steel (CR4).
1.5mm as standard or 2mm option
Material gland plate 3mm 316L, (1.4404) Stainless Steel
or Mild Steel (CR4)
Finish Stainless Steel – electropolished
Mild Steel – Powder coated RAL 7032
Weight Empty 13Kg (4 Gland Plate Box)
Cover Fixing Fully detachable hinged cover with captive M6
Stainless Steel hexagon head slotted screws
Gasket One piece fire resistant closed cell Neoprene for Ta
-40°C. One piece silicone rubber for Ta -50°C
Earthing 10mm brass internal/external earth stud as
standard. Optional earth stud welded to cover.
Optional earth stud welded to gland plate
Entries Via gland plates 1- 4 or direct through body
ENCLOSURE SPECIFICATION
FXL7 - 500mm x 350mm x 165/215mm
ORDERING INFORMATION
Material Gland Plate Options Product Codes (Standard) Product Codes (Deep)
Number Location Ex e Terminal Box
Ex e U Component
Approved
Ex ia Terminal Box Ex e Terminal Box
Ex e U Component
Approved
Ex ia Terminal Box
Stainless 0 - FXLS710 FXLS720 FXLS730 FXLS710D FXLS720D FXLS730D
Mild Steel 0 - FXLM710 FXLM720 FXLM730 FXLM710D FXLM720D FXLM730D
Stainless 1 B FXLS711 FXLS721 FXLS731 FXLS711D FXLS721D FXLS731D
Mild Steel 1 B FXLM711 FXLM721 FXLM731 FXLM711D FXLM721D FXLM731D
Stainless 2 AB FXLS712 FXLS722 FXLS732 FXLS712D FXLS722D FXLS732D
Mild Steel 2 AB FXLM712 FXLM722 FXLM732 FXLM712D FXLM722D FXLM732D
Stainless 3 BCD FXLS713 FXLS723 FXLS733 FXLS713D FXLS723D FXLS733D
Mild Steel 3 BCD FXLM713 FXLM723 FXLM733 FXLM713D FXLM723D FXLM733D
Stainless 4 ABCD FXLS714 FXLS724 FXLS734 FXLS714D FXLS724D FXLS734D
Mild Steel 4 ABCD FXLM714 FXLM724 FXLM734 FXLM714D FXLM724D FXLM734D
A GUIDE TO ENTRY CAPACITY FOR GLAND PLATES*
Enclosure Size FXL7 FXL7D
Gland Size mm 20 25 32 20 25 32
Side A + B 16 13 6 32 21 12
Side C + D 20 17 8 40 27 15
* More entries are available if direct entry is used
WDU 2.5 WDU 4 WDU 6 WDU 10
Verticle Rail 3x85 3x70 3x52 3x41
Horizontal Rail 4x57 4x46 4x34 4x27
A GUIDE TO PHYSICAL TERMINAL CAPACITY
Note: This is a guide to Physical Terminal Capacity only. Installers must ensure that the
maximum power dissipation given above is not exceeded
HAZARDOUS AREA SPECIFICATION
Marking to 94/9/EC II 2 GD II 1 GD
Type of Protection Ex e IIC T* Gb
Ex tb IIIC T**°C Db
Ex ia IIC T* Ga
Ex tb IIIC T**°C Da
Ambient Temp.°C
Gas
Temperature
Class (T*C)
Dust
Temperature
Class (T**)(°C)
Max Dissipation
(W)
Min Max II 1 G
II 2 G
II 2 GD
II 1 D
II 1 GDSilicone
Gasket
Neoprene
Gasket
-50 -40 +40 T6 80
21 10.5
-50 -40 +55 T5 95
-50 -40 +85 T4 130
-50 N/A +120 T3 160
Ingress Protection IP66 to EN60529:1992
Area Classification Zones 0,1,2,20,21,22
Certification No. SIRA99ATEX3199, SIRA00ATEX3027U
IECExSIR06.0073U, IECExSIR06.0074
GOST-R POCC GB.Mл14.B00224
Optional Extras
6mm stainless steel earthing stud welded to cover CES6 6mm earthing stud welded to gland plate, same material as box GPS6
Equipment mounting plate, same material as box FXL7MP Rain canopy, same material as box FXL7RC
10mm internal/external Stainless Steel earth stud SSET Document wallet, same material as box FXL7DW
40. Ex e and Ex ia Terminal Boxes - Stainless and Mild Steel
Subject to modifications without notice
Pepperl+Fuchs Group
www.pepperl-fuchs.com
USA: +1 330 486 0002
pa-info@us.pepperl-fuchs.com pa-info@de.pepperl-fuchs.com
Singapore: +65 6779 9091
pa-info@sg.pepperl-fuchs.com
Copyright Pepperl+Fuchs
Germany: +49 621 776 2222 39
Return Flange
Sealing
500
369
384
450
525
542
573
545
620
11
80/130
407
129/179
165/215
80/130
464
All Dimensions in mm.
Material Box 316L, (1.4404) Stainless Steel or Mild Steel (CR4).
1.5mm as standard or 2mm option
Material gland plate 3mm 316L, (1.4404) Stainless Steel
or Mild Steel (CR4)
Finish Stainless Steel – electropolished
Mild Steel – Powder coated RAL 7032
Weight Empty 17Kg (4 Gland Plate Box)
Cover Fixing Fully detachable hinged cover with captive M6
Stainless Steel hexagon head slotted screws
Gasket One piece fire resistant closed cell Neoprene for Ta
-40°C. One piece silicone rubber for Ta -50°C
Earthing 10mm brass internal/external earth stud as
standard. Optional earth stud welded to cover.
Optional earth stud welded to gland plate
Entries Via gland plates 1- 4 or direct through body
ENCLOSURE SPECIFICATION
FXL8 - 620mm x 450mm x 165/215mm
ORDERING INFORMATION
Material Gland Plate Options Product Codes (Standard) Product Codes (Deep)
Number Location Ex e Terminal Box
Ex e U Component
Approved
Ex ia Terminal Box Ex e Terminal Box
Ex e U Component
Approved
Ex ia Terminal Box
Stainless 0 - FXLS810 FXLS820 FXLS830 FXLS810D FXLS820D FXLS830D
Mild Steel 0 - FXLM810 FXLM820 FXLM830 FXLM810D FXLM820D FXLM830D
Stainless 1 B FXLS811 FXLS821 FXLS831 FXLS811D FXLS821D FXLS831D
Mild Steel 1 B FXLM811 FXLM821 FXLM831 FXLM811D FXLM821D FXLM831D
Stainless 2 AB FXLS812 FXLS822 FXLS832 FXLS812D FXLS822D FXLS832D
Mild Steel 2 AB FXLM812 FXLM822 FXLM832 FXLM812D FXLM822D FXLM832D
Stainless 3 BCD FXLS813 FXLS823 FXLS833 FXLS813D FXLS823D FXLS833D
Mild Steel 3 BCD FXLM813 FXLM823 FXLM833 FXLM813D FXLM823D FXLM833D
Stainless 4 ABCD FXLS814 FXLS824 FXLS834 FXLS814D FXLS824D FXLS834D
Mild Steel 4 ABCD FXLM814 FXLM824 FXLM834 FXLM814D FXLM824D FXLM834D
A GUIDE TO ENTRY CAPACITY FOR GLAND PLATES*
Enclosure Size FXL8 FXL8D
Gland Size mm 20 25 32 20 25 32
Side A + B 22 18 9 44 27 17
Side C + D 26 21 10 50 33 18
* More entries are available if direct entry is used
WDU 2.5 WDU 4 WDU 6 WDU 10
Verticle Rail 3x108 3x89 3x66 3x53
Horizontal Rail 5x76 5x62 5x46 5x37
A GUIDE TO PHYSICAL TERMINAL CAPACITY
Note: This is a guide to Physical Terminal Capacity only. Installers must ensure that the
maximum power dissipation given above is not exceeded
HAZARDOUS AREA SPECIFICATION
Marking to 94/9/EC II 2 GD II 1 GD
Type of Protection Ex e IIC T* Gb
Ex tb IIIC T**°C Db
Ex ia IIC T* Ga
Ex tb IIIC T**°C Da
Ambient Temp.°C
Gas
Temperature
Class (T*C)
Dust
Temperature
Class (T**)(°C)
Max Dissipation
(W)
Min Max II 1 G
II 2 G
II 2 GD
II 1 D
II 1 GDSilicone
Gasket
Neoprene
Gasket
-50 -40 +40 T6 80
41.7 20.5
-50 -40 +55 T5 95
-50 -40 +85 T4 130
-50 N/A +120 T3 160
Ingress Protection IP66 to EN60529:1992
Area Classification Zones 0,1,2,20,21,22
Certification No. SIRA99ATEX3199, SIRA00ATEX3027U
IECExSIR06.0073U, IECExSIR06.0074
GOST-R POCC GB.Mл14.B00224
Optional Extras
6mm stainless steel earthing stud welded to cover CES6 6mm earthing stud welded to gland plate, same material as box GPS6
Equipment mounting plate, same material as box FXL8MP Rain canopy, same material as box FXL8RC
10mm internal/external Stainless Steel earth stud SSET Document wallet, same material as box FXL8DW
41. Ex e and Ex ia Terminal Boxes - Stainless and Mild Steel
Subject to modifications without notice
Pepperl+Fuchs Group
www.pepperl-fuchs.com
USA: +1 330 486 0002
pa-info@us.pepperl-fuchs.com pa-info@de.pepperl-fuchs.com
Singapore: +65 6779 9091
pa-info@sg.pepperl-fuchs.com
Copyright Pepperl+Fuchs
Germany: +49 621 776 222240
Return Flange
Sealing
558
427
442
508
583
80/130
464
684
715
687
762
80/130
129/179
11
464
165/215
All Dimensions in mm.
Material Box 316L, (1.4404) Stainless Steel or Mild Steel (CR4).
1.5mm as standard or 2mm option
Material gland plate 3mm 316L, (1.4404) Stainless Steel
or Mild Steel (CR4)
Finish Stainless Steel – electropolished
Mild Steel – Powder coated RAL 7032
Weight Empty 21Kg (4 Gland Plate Box)
Cover Fixing Fully detachable hinged cover with captive M6
Stainless Steel hexagon head slotted screws
Gasket One piece fire resistant closed cell Neoprene for Ta
-40°C. One piece silicone rubber for Ta -50°C
Earthing 10mm brass internal/external earth stud as
standard. Optional earth stud welded to cover.
Optional earth stud welded to gland plate
Entries Via gland plates 1- 4 or direct through body
ENCLOSURE SPECIFICATION
FXL9 - 762mm x 508mm x 165/215mm
ORDERING INFORMATION
Material Gland Plate Options Product Codes (Standard) Product Codes (Deep)
Number Location Ex e Terminal Box
Ex e U Component
Approved
Ex ia Terminal Box Ex e Terminal Box
Ex e U Component
Approved
Ex ia Terminal Box
Stainless 0 - FXLS910 FXLS920 FXLS930 FXLS910D FXLS920D FXLS930D
Mild Steel 0 - FXLM910 FXLM920 FXLM930 FXLM910D FXLM920D FXLM930D
Stainless 1 B FXLS911 FXLS921 FXLS931 FXLS911D FXLS921D FXLS931D
Mild Steel 1 B FXLM911 FXLM921 FXLM931 FXLM911D FXLM921D FXLM931D
Stainless 2 AB FXLS912 FXLS922 FXLS932 FXLS912D FXLS922D FXLS932D
Mild Steel 2 AB FXLM912 FXLM922 FXLM932 FXLM912D FXLM922D FXLM932D
Stainless 3 BCD FXLS913 FXLS923 FXLS933 FXLS913D FXLS923D FXLS933D
Mild Steel 3 BCD FXLM913 FXLM923 FXLM933 FXLM913D FXLM923D FXLM933D
Stainless 4 ABCD FXLS914 FXLS924 FXLS934 FXLS914D FXLS924D FXLS934D
Mild Steel 4 ABCD FXLM914 FXLM924 FXLM934 FXLM914D FXLM924D FXLM934D
A GUIDE TO ENTRY CAPACITY FOR GLAND PLATES*
Enclosure Size FXL9 FXL9D
Gland Size mm 20 25 32 20 25 32
Side A + B 26 21 10 50 33 18
Side C + D 26 21 10 50 33 18
* More entries are available if direct entry is used
WDU 2.5 WDU 4 WDU 6 WDU 10
Verticle Rail 4x134 4x112 4x83 4x66
Horizontal Rail 6x86 6x72 6x53 6x41
A GUIDE TO PHYSICAL TERMINAL CAPACITY
Note: This is a guide to Physical Terminal Capacity only. Installers must ensure that the
maximum power dissipation given above is not exceeded
HAZARDOUS AREA SPECIFICATION
Marking to 94/9/EC II 2 GD II 1 GD
Type of Protection Ex e IIC T* Gb
Ex tb IIIC T**°C Db
Ex ia IIC T* Ga
Ex tb IIIC T**°C Da
Ambient Temp.°C
Gas
Temperature
Class (T*C)
Dust
Temperature
Class (T**)(°C)
Max Dissipation
(W)
Min Max II 1 G
II 2 G
II 2 GD
II 1 D
II 1 GDSilicone
Gasket
Neoprene
Gasket
-50 -40 +40 T6 80
41.7 20.5
-50 -40 +55 T5 95
-50 -40 +85 T4 130
-50 N/A +120 T3 160
Ingress Protection IP66 to EN60529:1992
Area Classification Zones 0,1,2,20,21,22
Certification No. SIRA99ATEX3199, SIRA00ATEX3027U
IECExSIR06.0073U, IECExSIR06.0074
GOST-R POCC GB.Mл14.B00224
Optional Extras
6mm stainless steel earthing stud welded to cover CES6 6mm earthing stud welded to gland plate, same material as box GPS6
Equipment mounting plate, same material as box FXL9MP Rain canopy, same material as box FXL9RC
10mm internal/external Stainless Steel earth stud SSET Document wallet, same material as box FXL9DW