VS-245 Data Sheet.pdf
•
0 likes•145 views
The document summarizes the features and specifications of the VS-245 screen model. It has continuous blade assembly and good sight-proofing characteristics. The screen comprises 2-inch deep reverse slope aluminum or stainless steel blades with a thickness of 0.081 inch. It can be finished in powder coat or anodized colors. The screen provides wind load resistance and is supplied semi-knocked down for field assembly. It comes with a 2-year warranty on materials and workmanship and a 20-year warranty on finishes.
Report
Share
Report
Share
Download to read offline
Recommended
VS-650R Data Sheet.pdf
The document summarizes the features and specifications of the VS-650R louver screen model. It has 6-inch deep reverse slope sight-proof blades made of aluminum or stainless steel. The blades are extruded with reinforcing bosses and snap-locked to blade braces for strength. The screen is designed to resist wind loads without damage and is supplied semi-knocked down for field assembly with mitered corners. It has a 55% free area and is classified as a Class 2 discharge loss coefficient for airflow performance.
ESR-4383.pdf
The document provides an evaluation report from ICC-ES regarding the CEMflex® VB waterstop manufactured by BPA-GmbH. The 3-sentence summary is:
The evaluation report assesses the CEMflex® VB waterstop for compliance with the IBC codes in preventing water penetration at concrete joints, finding it provides a watertight seal up to certain hydrostatic pressures when properly installed. The metal-based waterstop has a cement coating that forms crystals to fill cracks when wet, and it must be embedded in concrete with specified coverage and overlap at joints according to the report holder's instructions. Special inspections are required to ensure proper installation and coating integrity of the waterstop prior to concrete placement.
2.5.4 Mez Rip Pin Isol With Disc 30
This document describes MEZ-RIP-PIN ISOL welding pins and the CDW-45-3 welding gun. The pins are made of galvanized and insulated special steel and are used to fasten insulation material to metal surfaces in a single step. The pins come in various lengths from 15mm to 100mm. The welding gun is powered by 230V and is used to insert and weld the pins through insulation and into metal surfaces. It has a 10m gun cable, 5m earth cable, and weighs 18kg without cables.
IBS Factory Report Assignment
This document provides details about a factory visit assignment to Swissma Building Technologies Sdn. Bhd. and Sanko production sites by a group of quantity surveying students. It includes:
1) An introduction to Swissma's history and formation, services, and notable projects.
2) Descriptions of industrialized building system components produced by Swissma and Sanko, including standing seam roofing, metal tiles, and ribbed panels.
3) Explanations and photos of the installation processes for Swissma's Doppelwelt standing seam and Snapwelt roofing systems.
4) Overviews of the roll forming and crimping manufacturing processes used at Sanko's
Pin-Wedge Manufacturer and Supplier | Padmavati Engineering
Padmavati Engineering: Your trusted partner for Pin-Wedge manufacturing and supply, delivering quality solutions
Unibox safe vu - issue no. 07
The document describes the Safe-VuScreen protective screen system. It uses rubber fins to firmly hold acrylic or glass panels in place. The screens are made of precision-cut aluminum profiles and can be customized for desks and workspaces. Safe-Vu screens are designed to be flexible, hygienic, and cost-effective solutions that enable social distancing in the workplace. The document provides details on the Fin, Float, and Free screen systems including product codes, dimensions, and configurations.
SEPCO Steel Electric Conduit & Cable Fittings - EMT Fititngs
SEPCO Steel Electric Products Company was founded in 1938 as a metal fabricating and stamping company by Morris Reddock and his son Philip, and incorporated in 1952. SEPCO carried a product line which included EMT and rigid one-hole and two-hole pipe straps, reducing washers and switch box supports. Malleable iron, steel and die-cast fittings were added to the product line and SEPCO now currently carries approximately 2,000 SKU's with trade sizes 1/2" - 6" on most product groups and is a leading manufacturer in the elctrical industry. All SEPCO products carry the full UL listing.
12777 coastal single pages part52
The document discusses various window locking products from Coastal Group including espagnolette bolts, mushroom bolts, and the easyPilot Duplex locking system from Winkhaus. The espagnolette bolts and mushroom bolts are made from stainless steel and provide lifetime operation in coastal areas. The easyPilot Duplex locking system has up to 6 locking points, a robust central gearbox for smooth operation, and opposing steel mushrooms that lock into keeps on both sides for high security in casement windows.
Recommended
VS-650R Data Sheet.pdf
The document summarizes the features and specifications of the VS-650R louver screen model. It has 6-inch deep reverse slope sight-proof blades made of aluminum or stainless steel. The blades are extruded with reinforcing bosses and snap-locked to blade braces for strength. The screen is designed to resist wind loads without damage and is supplied semi-knocked down for field assembly with mitered corners. It has a 55% free area and is classified as a Class 2 discharge loss coefficient for airflow performance.
ESR-4383.pdf
The document provides an evaluation report from ICC-ES regarding the CEMflex® VB waterstop manufactured by BPA-GmbH. The 3-sentence summary is:
The evaluation report assesses the CEMflex® VB waterstop for compliance with the IBC codes in preventing water penetration at concrete joints, finding it provides a watertight seal up to certain hydrostatic pressures when properly installed. The metal-based waterstop has a cement coating that forms crystals to fill cracks when wet, and it must be embedded in concrete with specified coverage and overlap at joints according to the report holder's instructions. Special inspections are required to ensure proper installation and coating integrity of the waterstop prior to concrete placement.
2.5.4 Mez Rip Pin Isol With Disc 30
This document describes MEZ-RIP-PIN ISOL welding pins and the CDW-45-3 welding gun. The pins are made of galvanized and insulated special steel and are used to fasten insulation material to metal surfaces in a single step. The pins come in various lengths from 15mm to 100mm. The welding gun is powered by 230V and is used to insert and weld the pins through insulation and into metal surfaces. It has a 10m gun cable, 5m earth cable, and weighs 18kg without cables.
IBS Factory Report Assignment
This document provides details about a factory visit assignment to Swissma Building Technologies Sdn. Bhd. and Sanko production sites by a group of quantity surveying students. It includes:
1) An introduction to Swissma's history and formation, services, and notable projects.
2) Descriptions of industrialized building system components produced by Swissma and Sanko, including standing seam roofing, metal tiles, and ribbed panels.
3) Explanations and photos of the installation processes for Swissma's Doppelwelt standing seam and Snapwelt roofing systems.
4) Overviews of the roll forming and crimping manufacturing processes used at Sanko's
Pin-Wedge Manufacturer and Supplier | Padmavati Engineering
Padmavati Engineering: Your trusted partner for Pin-Wedge manufacturing and supply, delivering quality solutions
Unibox safe vu - issue no. 07
The document describes the Safe-VuScreen protective screen system. It uses rubber fins to firmly hold acrylic or glass panels in place. The screens are made of precision-cut aluminum profiles and can be customized for desks and workspaces. Safe-Vu screens are designed to be flexible, hygienic, and cost-effective solutions that enable social distancing in the workplace. The document provides details on the Fin, Float, and Free screen systems including product codes, dimensions, and configurations.
SEPCO Steel Electric Conduit & Cable Fittings - EMT Fititngs
SEPCO Steel Electric Products Company was founded in 1938 as a metal fabricating and stamping company by Morris Reddock and his son Philip, and incorporated in 1952. SEPCO carried a product line which included EMT and rigid one-hole and two-hole pipe straps, reducing washers and switch box supports. Malleable iron, steel and die-cast fittings were added to the product line and SEPCO now currently carries approximately 2,000 SKU's with trade sizes 1/2" - 6" on most product groups and is a leading manufacturer in the elctrical industry. All SEPCO products carry the full UL listing.
12777 coastal single pages part52
The document discusses various window locking products from Coastal Group including espagnolette bolts, mushroom bolts, and the easyPilot Duplex locking system from Winkhaus. The espagnolette bolts and mushroom bolts are made from stainless steel and provide lifetime operation in coastal areas. The easyPilot Duplex locking system has up to 6 locking points, a robust central gearbox for smooth operation, and opposing steel mushrooms that lock into keeps on both sides for high security in casement windows.
181015 muna-fichas nebulizada-email
This document provides specifications for metal pipe clamps and accessories made by BIS. It includes details on materials, coatings, certifications, applications, and specifications for different clamp and accessory sizes. Performance characteristics include corrosion resistance up to 1000 hours in salt spray testing, noise insulation according to DIN 4109, and fire safety certification starting at M10 sizes. Technical data and specifications are provided for each product, including dimensions, material, load ratings, and other details.
All drawings
This document contains construction drawings for a new regional headquarters and showroom including a ceiling plan, external wall section details, and an eaves detail. The drawings show materials, components, and specifications for the proposed building including insulation, fire protection, ventilation, structure, roofing, and facade. The drawings were produced by Dan Palmer for the Bagstock Brick Company project and include a legend, scale, and revisions.
Primasteel Roofs - Everest Industries Limited
Everest has been pioneering roofing solutions in India since 1934. The document introduces Everest Primasteel Roofs, which offer exceptional aesthetics, superior durability, and a 15-year warranty due to their four-layer protective coating. Everest Primasteel Roofs are manufactured using high precision machinery and come in various profiles, thicknesses, and colors to suit different applications. Major clients in various industries have trusted Everest for their roofing and cladding needs due to the product's strength, quality, and reliability.
Design of Snow Shovel for Jeep Cherokee
Removing snow from driveways during Chicago winters can be one of the most frustrating jobs given the long winters the city experiences. There are readily available hydraulic shovels and engine operated blowers in the market but given the cost of these devices, it is not affordable to the common man. As a team, I worked on a simple and affordable system which can be mounted onto the Jeep ANYTIME and doesn’t require any external source to run the shovel. The final design of the shovel is a retro-fitment and can be DE-attached from the car when not in use.
Design of snow shovel for jeep cherokee (1)
The document outlines the design of a snow shovel attachment for a Jeep Cherokee by a group called ASPIRE. It includes an introduction describing the need for an affordable snow removal solution. It then discusses the project scope and constraints, design intent, decision matrix, patent research, collaboration on CAD models, estimated timelines, functionality of the device and its parts, bill of materials, assembly process, manufacturing techniques, CAD strategy, cost and weight analysis, task distribution, and timeline. References are also provided.
Design of snow shovel for jeep cherokee
Removing snow from drive ways during Chicago winters can be one of the most frustrating job given the long winters the city experiences. There are readily available hydraulic shovels and engine operated blowers in the market but given the cost of these devices, it is not affordable to the common man. As a group, ASPIRE worked on a simple and affordable system which can be mounted onto the Jeep ANYTIME and doesn’t require any external source to run the shovel. The final design of the shovel is a retro-fitment and can be deattached from the car when not in use.
Standard specifications
This document provides specifications for pre-engineered metal buildings manufactured by MESCO Metal Buildings. It covers materials, structural framing, and roof/wall covering. The structural steel is designed according to AISC and AISI standards. Framing includes tapered or straight columns, tapered rafters, and cold-formed girts and purlins. Roof panels are available in standing seam or rib profiles in 26 or 24 gauge steel. Wall panels can be rib or architectural profiles.
New Life Steel Structures, Mumbai, Sheds and Steel Structures
We are an eminent Partnership Firm engaged in manufacturing, supplying and exporting a vast range of Industrial Sheds and Steel Structures. These are known for their unique designs, self adhesive nature, and thermal insulation properties.
Cl newlifesteel
New Life Steel Structures is an ISO 9001:2008 certified company that manufactures pre-engineered steel buildings for various applications like factories, warehouses, power plants, hangars, and community halls. Their buildings provide speed of construction, flexibility for expansion, and withstand severe weather conditions. They offer a full range of building components and have over 19 years of experience in meeting client needs. Their manufacturing process includes shop drawing preparation, fabrication, quality control testing, and on-site assembly using cranes.
ASHSCREEN
This document provides information on Ashscreen, a perforated and expanded screen system for enclosing car parks and other open spaces. It discusses the product's aesthetic and engineered design options for materials, patterns, and finishes. Installation details are also included showing how the screen attaches to supporting structures using brackets, joints, and fixings. The document emphasizes Ashscreen's flexibility and the technical support provided by Ash & Lacy, the manufacturer.
Sika Waterbars®.pdf من شركه سيكا السعوديه
This document provides product information on Sika Waterbars®, which are flexible PVC profiles used to seal construction and expansion joints in concrete structures. It describes the various sizes and types available, their intended uses, advantages, standards/approvals, installation instructions, and welding procedures. The profiles are available in rolls up to 30 meters long and are designed to seal joints and keep water out of structures like reservoirs, tanks, dams, pools, and basements.
Analysis of Cold Formed Steel Connections using FEM
1. The document analyzes cold formed steel connections using finite element modeling (FEM). Four different beam-column connection configurations are modeled and tested, including connections with single or double rows of screws with or without angle plates.
2. Experimental results for each connection are compared to FEM analysis results from ANSYS. The connections are modeled in CATIA and meshed in Hypermesh before analysis in ANSYS to determine load-carrying capacity, displacement, stress, and strain.
3. Preliminary results show that connections using double rows of screws and angle plates have higher load capacities than those with single rows or without plates. Further comparison of experimental and FEM results will provide insight into optimizing cold formed steel
2.5.1 Mez Sah Pin
Self-adhesive insulation pins are used to affix insulation material to steel surfaces without tools. They have a galvanized steel pin and base plate with adhesive foam backing. The pins come in various lengths and are installed by cleaning the surface, removing the pin's protective film, and pressing it into place. Lock washers and nylon caps are available as accessories. Proper installation requires a minimum temperature of 10°C and the adhesive reaches full strength within 24 hours.
2.5.2 Mez Rip Pin
This document discusses welding studs and accessories for fastening insulation material to metal surfaces. It describes MEZ-RIP-PIN welding studs made of galvanized steel with spherical heads and diamond tips in various lengths and packaging. Lock washers and nylon protective caps are also described. Guidelines are provided for inserting the studs using a welding gun, fastening insulation material, and suggested assembly based on insulation thickness and temperature.
Universal Aluminum Side-of-Pole Mount
This document describes a universal aluminum solar panel bracket mounting system for mounting solar panels to poles. The bracket is designed for quick and secure installation of PV modules to a single pole. It uses high strength aluminum and corrosion resistant hardware. The bracket can be adjusted to various tilt angles for maximizing solar production and can be adjusted by one person. It is suitable for mounting most common solar panels ranging from 60W to 330W.
Total cost of plant
This document is a performance appraisal certificate issued by the Building Materials & Technology Promotion Council (BMTPC) to M/s Jindal Mectec Pvt. Ltd. for their continuous sandwich (PUF) panel system with steel structure. The 3-page summary includes:
1) Details of the certificate holder and description of the PUF panel system which uses an insulating polyurethane foam core sandwiched between two layers of pre-coated galvanized steel sheets.
2) Profiles, sizes, applications and handling precautions of the different panel types - Coldwell walls, Strupan roofs, and Isoclad panels.
3) Basis of
WT Henley Pole Mounted Cut-outs
This document summarizes two pole-mounted fused cutout models for providing low voltage power supply to rural dwellings. The standard model is robust, designed for ease of use with a slide-fit front cover and accepts fuselinks up to 400A. The compact model can be pole, wall, or cross arm mounted, has mechanical terminals that don't require additional lugs, and accepts conductors between 70-300mm2. Both are designed to meet IP43 rating and BS7656:1993 compliance standards.
Thomson fineline catalog
This document provides information about BS&A FineLine ball screws. It discusses BS&A's proprietary Precision Screw Forming (PSF) Technology, which enables the production of highly accurate ball screws through a rolling process rather than grinding. The technology results in ball screws that achieve accuracies comparable to ground screws but at a lower cost and faster production time. The document also outlines the accuracy and precision classes, preload options, and features of BS&A FineLine ball screws.
Thomson BSA Fineline Ball Screws
This document provides product specifications for BS&A FineLine ball screws in metric unit sizes. It includes tables listing metric part numbers, available assembly configurations, and details on standard ball nut types including flanged, threaded, and end journal options. Engineering specifications are also covered, such as efficiency, torque, life, speed, buckling, and materials.
6276
This document specifies requirements for flexible shafts used in concrete vibrators. It defines terminology such as inner shaft, outer casing, and end fittings. It outlines two types of flexible shafts based on end fitting form. Dimension requirements include diameters of 10-15 mm and lengths of 4-6 meters for the inner shaft. Material requirements specify spring steel for the inner shaft and rubber with a steel liner for the outer casing. Tests are described to check for flaws, flexibility, and locking diameter. Markings must include the designation and manufacturer. Figures provide examples of assembly configurations and end fitting dimensions.
Unit-III-ELECTROCHEMICAL STORAGE DEVICES.ppt
Batteries -Introduction – Types of Batteries – discharging and charging of battery - characteristics of battery –battery rating- various tests on battery- – Primary battery: silver button cell- Secondary battery :Ni-Cd battery-modern battery: lithium ion battery-maintenance of batteries-choices of batteries for electric vehicle applications.
Fuel Cells: Introduction- importance and classification of fuel cells - description, principle, components, applications of fuel cells: H2-O2 fuel cell, alkaline fuel cell, molten carbonate fuel cell and direct methanol fuel cells.
AI assisted telemedicine KIOSK for Rural India.pptx
It gives the overall description of SIH problem statement " AI assisted telemedicine KIOSK for Rural India".
More Related Content
Similar to VS-245 Data Sheet.pdf
181015 muna-fichas nebulizada-email
This document provides specifications for metal pipe clamps and accessories made by BIS. It includes details on materials, coatings, certifications, applications, and specifications for different clamp and accessory sizes. Performance characteristics include corrosion resistance up to 1000 hours in salt spray testing, noise insulation according to DIN 4109, and fire safety certification starting at M10 sizes. Technical data and specifications are provided for each product, including dimensions, material, load ratings, and other details.
All drawings
This document contains construction drawings for a new regional headquarters and showroom including a ceiling plan, external wall section details, and an eaves detail. The drawings show materials, components, and specifications for the proposed building including insulation, fire protection, ventilation, structure, roofing, and facade. The drawings were produced by Dan Palmer for the Bagstock Brick Company project and include a legend, scale, and revisions.
Primasteel Roofs - Everest Industries Limited
Everest has been pioneering roofing solutions in India since 1934. The document introduces Everest Primasteel Roofs, which offer exceptional aesthetics, superior durability, and a 15-year warranty due to their four-layer protective coating. Everest Primasteel Roofs are manufactured using high precision machinery and come in various profiles, thicknesses, and colors to suit different applications. Major clients in various industries have trusted Everest for their roofing and cladding needs due to the product's strength, quality, and reliability.
Design of Snow Shovel for Jeep Cherokee
Removing snow from driveways during Chicago winters can be one of the most frustrating jobs given the long winters the city experiences. There are readily available hydraulic shovels and engine operated blowers in the market but given the cost of these devices, it is not affordable to the common man. As a team, I worked on a simple and affordable system which can be mounted onto the Jeep ANYTIME and doesn’t require any external source to run the shovel. The final design of the shovel is a retro-fitment and can be DE-attached from the car when not in use.
Design of snow shovel for jeep cherokee (1)
The document outlines the design of a snow shovel attachment for a Jeep Cherokee by a group called ASPIRE. It includes an introduction describing the need for an affordable snow removal solution. It then discusses the project scope and constraints, design intent, decision matrix, patent research, collaboration on CAD models, estimated timelines, functionality of the device and its parts, bill of materials, assembly process, manufacturing techniques, CAD strategy, cost and weight analysis, task distribution, and timeline. References are also provided.
Design of snow shovel for jeep cherokee
Removing snow from drive ways during Chicago winters can be one of the most frustrating job given the long winters the city experiences. There are readily available hydraulic shovels and engine operated blowers in the market but given the cost of these devices, it is not affordable to the common man. As a group, ASPIRE worked on a simple and affordable system which can be mounted onto the Jeep ANYTIME and doesn’t require any external source to run the shovel. The final design of the shovel is a retro-fitment and can be deattached from the car when not in use.
Standard specifications
This document provides specifications for pre-engineered metal buildings manufactured by MESCO Metal Buildings. It covers materials, structural framing, and roof/wall covering. The structural steel is designed according to AISC and AISI standards. Framing includes tapered or straight columns, tapered rafters, and cold-formed girts and purlins. Roof panels are available in standing seam or rib profiles in 26 or 24 gauge steel. Wall panels can be rib or architectural profiles.
New Life Steel Structures, Mumbai, Sheds and Steel Structures
We are an eminent Partnership Firm engaged in manufacturing, supplying and exporting a vast range of Industrial Sheds and Steel Structures. These are known for their unique designs, self adhesive nature, and thermal insulation properties.
Cl newlifesteel
New Life Steel Structures is an ISO 9001:2008 certified company that manufactures pre-engineered steel buildings for various applications like factories, warehouses, power plants, hangars, and community halls. Their buildings provide speed of construction, flexibility for expansion, and withstand severe weather conditions. They offer a full range of building components and have over 19 years of experience in meeting client needs. Their manufacturing process includes shop drawing preparation, fabrication, quality control testing, and on-site assembly using cranes.
ASHSCREEN
This document provides information on Ashscreen, a perforated and expanded screen system for enclosing car parks and other open spaces. It discusses the product's aesthetic and engineered design options for materials, patterns, and finishes. Installation details are also included showing how the screen attaches to supporting structures using brackets, joints, and fixings. The document emphasizes Ashscreen's flexibility and the technical support provided by Ash & Lacy, the manufacturer.
Sika Waterbars®.pdf من شركه سيكا السعوديه
This document provides product information on Sika Waterbars®, which are flexible PVC profiles used to seal construction and expansion joints in concrete structures. It describes the various sizes and types available, their intended uses, advantages, standards/approvals, installation instructions, and welding procedures. The profiles are available in rolls up to 30 meters long and are designed to seal joints and keep water out of structures like reservoirs, tanks, dams, pools, and basements.
Analysis of Cold Formed Steel Connections using FEM
1. The document analyzes cold formed steel connections using finite element modeling (FEM). Four different beam-column connection configurations are modeled and tested, including connections with single or double rows of screws with or without angle plates.
2. Experimental results for each connection are compared to FEM analysis results from ANSYS. The connections are modeled in CATIA and meshed in Hypermesh before analysis in ANSYS to determine load-carrying capacity, displacement, stress, and strain.
3. Preliminary results show that connections using double rows of screws and angle plates have higher load capacities than those with single rows or without plates. Further comparison of experimental and FEM results will provide insight into optimizing cold formed steel
2.5.1 Mez Sah Pin
Self-adhesive insulation pins are used to affix insulation material to steel surfaces without tools. They have a galvanized steel pin and base plate with adhesive foam backing. The pins come in various lengths and are installed by cleaning the surface, removing the pin's protective film, and pressing it into place. Lock washers and nylon caps are available as accessories. Proper installation requires a minimum temperature of 10°C and the adhesive reaches full strength within 24 hours.
2.5.2 Mez Rip Pin
This document discusses welding studs and accessories for fastening insulation material to metal surfaces. It describes MEZ-RIP-PIN welding studs made of galvanized steel with spherical heads and diamond tips in various lengths and packaging. Lock washers and nylon protective caps are also described. Guidelines are provided for inserting the studs using a welding gun, fastening insulation material, and suggested assembly based on insulation thickness and temperature.
Universal Aluminum Side-of-Pole Mount
This document describes a universal aluminum solar panel bracket mounting system for mounting solar panels to poles. The bracket is designed for quick and secure installation of PV modules to a single pole. It uses high strength aluminum and corrosion resistant hardware. The bracket can be adjusted to various tilt angles for maximizing solar production and can be adjusted by one person. It is suitable for mounting most common solar panels ranging from 60W to 330W.
Total cost of plant
This document is a performance appraisal certificate issued by the Building Materials & Technology Promotion Council (BMTPC) to M/s Jindal Mectec Pvt. Ltd. for their continuous sandwich (PUF) panel system with steel structure. The 3-page summary includes:
1) Details of the certificate holder and description of the PUF panel system which uses an insulating polyurethane foam core sandwiched between two layers of pre-coated galvanized steel sheets.
2) Profiles, sizes, applications and handling precautions of the different panel types - Coldwell walls, Strupan roofs, and Isoclad panels.
3) Basis of
WT Henley Pole Mounted Cut-outs
This document summarizes two pole-mounted fused cutout models for providing low voltage power supply to rural dwellings. The standard model is robust, designed for ease of use with a slide-fit front cover and accepts fuselinks up to 400A. The compact model can be pole, wall, or cross arm mounted, has mechanical terminals that don't require additional lugs, and accepts conductors between 70-300mm2. Both are designed to meet IP43 rating and BS7656:1993 compliance standards.
Thomson fineline catalog
This document provides information about BS&A FineLine ball screws. It discusses BS&A's proprietary Precision Screw Forming (PSF) Technology, which enables the production of highly accurate ball screws through a rolling process rather than grinding. The technology results in ball screws that achieve accuracies comparable to ground screws but at a lower cost and faster production time. The document also outlines the accuracy and precision classes, preload options, and features of BS&A FineLine ball screws.
Thomson BSA Fineline Ball Screws
This document provides product specifications for BS&A FineLine ball screws in metric unit sizes. It includes tables listing metric part numbers, available assembly configurations, and details on standard ball nut types including flanged, threaded, and end journal options. Engineering specifications are also covered, such as efficiency, torque, life, speed, buckling, and materials.
6276
This document specifies requirements for flexible shafts used in concrete vibrators. It defines terminology such as inner shaft, outer casing, and end fittings. It outlines two types of flexible shafts based on end fitting form. Dimension requirements include diameters of 10-15 mm and lengths of 4-6 meters for the inner shaft. Material requirements specify spring steel for the inner shaft and rubber with a steel liner for the outer casing. Tests are described to check for flaws, flexibility, and locking diameter. Markings must include the designation and manufacturer. Figures provide examples of assembly configurations and end fitting dimensions.
Similar to VS-245 Data Sheet.pdf (20)
New Life Steel Structures, Mumbai, Sheds and Steel Structures
New Life Steel Structures, Mumbai, Sheds and Steel Structures
Analysis of Cold Formed Steel Connections using FEM
Analysis of Cold Formed Steel Connections using FEM
Recently uploaded
Unit-III-ELECTROCHEMICAL STORAGE DEVICES.ppt
Batteries -Introduction – Types of Batteries – discharging and charging of battery - characteristics of battery –battery rating- various tests on battery- – Primary battery: silver button cell- Secondary battery :Ni-Cd battery-modern battery: lithium ion battery-maintenance of batteries-choices of batteries for electric vehicle applications.
Fuel Cells: Introduction- importance and classification of fuel cells - description, principle, components, applications of fuel cells: H2-O2 fuel cell, alkaline fuel cell, molten carbonate fuel cell and direct methanol fuel cells.
AI assisted telemedicine KIOSK for Rural India.pptx
It gives the overall description of SIH problem statement " AI assisted telemedicine KIOSK for Rural India".
Embedded machine learning-based road conditions and driving behavior monitoring
Car accident rates have increased in recent years, resulting in losses in human lives, properties, and other financial costs. An embedded machine learning-based system is developed to address this critical issue. The system can monitor road conditions, detect driving patterns, and identify aggressive driving behaviors. The system is based on neural networks trained on a comprehensive dataset of driving events, driving styles, and road conditions. The system effectively detects potential risks and helps mitigate the frequency and impact of accidents. The primary goal is to ensure the safety of drivers and vehicles. Collecting data involved gathering information on three key road events: normal street and normal drive, speed bumps, circular yellow speed bumps, and three aggressive driving actions: sudden start, sudden stop, and sudden entry. The gathered data is processed and analyzed using a machine learning system designed for limited power and memory devices. The developed system resulted in 91.9% accuracy, 93.6% precision, and 92% recall. The achieved inference time on an Arduino Nano 33 BLE Sense with a 32-bit CPU running at 64 MHz is 34 ms and requires 2.6 kB peak RAM and 139.9 kB program flash memory, making it suitable for resource-constrained embedded systems.
Data Driven Maintenance | UReason Webinar
Discover the latest insights on Data Driven Maintenance with our comprehensive webinar presentation. Learn about traditional maintenance challenges, the right approach to utilizing data, and the benefits of adopting a Data Driven Maintenance strategy. Explore real-world examples, industry best practices, and innovative solutions like FMECA and the D3M model. This presentation, led by expert Jules Oudmans, is essential for asset owners looking to optimize their maintenance processes and leverage digital technologies for improved efficiency and performance. Download now to stay ahead in the evolving maintenance landscape.
cnn.pptx Convolutional neural network used for image classication
Convolutional Neural Network used for image classification
Applications of artificial Intelligence in Mechanical Engineering.pdf
Historically, mechanical engineering has relied heavily on human expertise and empirical methods to solve complex problems. With the introduction of computer-aided design (CAD) and finite element analysis (FEA), the field took its first steps towards digitization. These tools allowed engineers to simulate and analyze mechanical systems with greater accuracy and efficiency. However, the sheer volume of data generated by modern engineering systems and the increasing complexity of these systems have necessitated more advanced analytical tools, paving the way for AI.
AI offers the capability to process vast amounts of data, identify patterns, and make predictions with a level of speed and accuracy unattainable by traditional methods. This has profound implications for mechanical engineering, enabling more efficient design processes, predictive maintenance strategies, and optimized manufacturing operations. AI-driven tools can learn from historical data, adapt to new information, and continuously improve their performance, making them invaluable in tackling the multifaceted challenges of modern mechanical engineering.
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Medical image analysis has witnessed significant advancements with deep learning techniques. In the domain of brain tumor segmentation, the ability to
precisely delineate tumor boundaries from magnetic resonance imaging (MRI)
scans holds profound implications for diagnosis. This study presents an ensemble convolutional neural network (CNN) with transfer learning, integrating
the state-of-the-art Deeplabv3+ architecture with the ResNet18 backbone. The
model is rigorously trained and evaluated, exhibiting remarkable performance
metrics, including an impressive global accuracy of 99.286%, a high-class accuracy of 82.191%, a mean intersection over union (IoU) of 79.900%, a weighted
IoU of 98.620%, and a Boundary F1 (BF) score of 83.303%. Notably, a detailed comparative analysis with existing methods showcases the superiority of
our proposed model. These findings underscore the model’s competence in precise brain tumor localization, underscoring its potential to revolutionize medical
image analysis and enhance healthcare outcomes. This research paves the way
for future exploration and optimization of advanced CNN models in medical
imaging, emphasizing addressing false positives and resource efficiency.
artificial intelligence and data science contents.pptx
What is artificial intelligence? Artificial intelligence is the ability of a computer or computer-controlled robot to perform tasks that are commonly associated with the intellectual processes characteristic of humans, such as the ability to reason.
› ...
Artificial intelligence (AI) | Definitio
Use PyCharm for remote debugging of WSL on a Windo cf5c162d672e4e58b4dde5d797...
This document serves as a comprehensive step-by-step guide on how to effectively use PyCharm for remote debugging of the Windows Subsystem for Linux (WSL) on a local Windows machine. It meticulously outlines several critical steps in the process, starting with the crucial task of enabling permissions, followed by the installation and configuration of WSL.
The guide then proceeds to explain how to set up the SSH service within the WSL environment, an integral part of the process. Alongside this, it also provides detailed instructions on how to modify the inbound rules of the Windows firewall to facilitate the process, ensuring that there are no connectivity issues that could potentially hinder the debugging process.
The document further emphasizes on the importance of checking the connection between the Windows and WSL environments, providing instructions on how to ensure that the connection is optimal and ready for remote debugging.
It also offers an in-depth guide on how to configure the WSL interpreter and files within the PyCharm environment. This is essential for ensuring that the debugging process is set up correctly and that the program can be run effectively within the WSL terminal.
Additionally, the document provides guidance on how to set up breakpoints for debugging, a fundamental aspect of the debugging process which allows the developer to stop the execution of their code at certain points and inspect their program at those stages.
Finally, the document concludes by providing a link to a reference blog. This blog offers additional information and guidance on configuring the remote Python interpreter in PyCharm, providing the reader with a well-rounded understanding of the process.
Software Engineering and Project Management - Introduction, Modeling Concepts...
Introduction, Modeling Concepts and Class Modeling: What is Object orientation? What is OO development? OO Themes; Evidence for usefulness of OO development; OO modeling history. Modeling
as Design technique: Modeling, abstraction, The Three models. Class Modeling: Object and Class Concept, Link and associations concepts, Generalization and Inheritance, A sample class model, Navigation of class models, and UML diagrams
Building the Analysis Models: Requirement Analysis, Analysis Model Approaches, Data modeling Concepts, Object Oriented Analysis, Scenario-Based Modeling, Flow-Oriented Modeling, class Based Modeling, Creating a Behavioral Model.
学校原版美国波士顿大学毕业证学历学位证书原版一模一样
原版一模一样【微信：741003700 】【美国波士顿大学毕业证学历学位证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Design and optimization of ion propulsion drone
Electric propulsion technology is widely used in many kinds of vehicles in recent years, and aircrafts are no exception. Technically, UAVs are electrically propelled but tend to produce a significant amount of noise and vibrations. Ion propulsion technology for drones is a potential solution to this problem. Ion propulsion technology is proven to be feasible in the earth’s atmosphere. The study presented in this article shows the design of EHD thrusters and power supply for ion propulsion drones along with performance optimization of high-voltage power supply for endurance in earth’s atmosphere.
官方认证美国密歇根州立大学毕业证学位证书原版一模一样
原版一模一样【微信：741003700 】【美国密歇根州立大学毕业证学位证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Recently uploaded (20)
AI assisted telemedicine KIOSK for Rural India.pptx
AI assisted telemedicine KIOSK for Rural India.pptx
Embedded machine learning-based road conditions and driving behavior monitoring
Embedded machine learning-based road conditions and driving behavior monitoring
cnn.pptx Convolutional neural network used for image classication
cnn.pptx Convolutional neural network used for image classication
Applications of artificial Intelligence in Mechanical Engineering.pdf
Applications of artificial Intelligence in Mechanical Engineering.pdf
4. Mosca vol I -Fisica-Tipler-5ta-Edicion-Vol-1.pdf
4. Mosca vol I -Fisica-Tipler-5ta-Edicion-Vol-1.pdf
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
artificial intelligence and data science contents.pptx
artificial intelligence and data science contents.pptx
Use PyCharm for remote debugging of WSL on a Windo cf5c162d672e4e58b4dde5d797...
Use PyCharm for remote debugging of WSL on a Windo cf5c162d672e4e58b4dde5d797...
Software Engineering and Project Management - Introduction, Modeling Concepts...
Software Engineering and Project Management - Introduction, Modeling Concepts...
Data Control Language.pptx Data Control Language.pptx
Data Control Language.pptx Data Control Language.pptx
VS-245 Data Sheet.pdf
- 1. Model—VS-245 50mm DEEP VISION SCREEN VS-245; March2015 FEATURES: Continuous blade assembly Good sight-proofing characteristics Material & Finishes: 1. VS-245 SCREEN comprises a. Blades: 2” deep reverse slope sight-proof 2. Metal Thickness: Mullion 0.081 inch (2.0 mm); blades 0.081 inch (2.0 mm). 3. Finish: PE-SDF / PVDF / Anodize after fabrication 4. Color: As scheduled. 5. Mullions: Concealed or Exposed. 6. Screens: Bird mesh / Insect mesh AVAILABLE AS OPTIONAL ACCESSORIES. 7. Screen location: Interior 8. Screening Material: Aluminium / Stainless Steel Louver Construction: 1. Wind Load Resistance: Design to resist +ve and –ve wind load of ___ psf (___kPa) without damage or permanent deformation. 2. Blades: One piece extrusion blades with reinforcing bosses snap-locked to heavy-gage extruded aluminum blade braces, attached to structural supports. Each blade brace is mechanically secured to structure using stainless steel fastenings. 3. Supplied semi-knocked down for field assembly. 4. Mitered corners 5. Exposed edges and ends of metal dressed smooth, free from sharp edges. Warranty: OSA louvers warranted for 2 years against defective material and workmanship, and 20 Years for Finishes.