Habeeb Ishaq has over 11 years of experience as a mechanical engineer in sustainable building services and design, MEP coordination, and project management. He has managed projects including hotels, shopping malls, apartments, and villas. Currently he works as a mechanical engineer for KEO International Consultants in Doha, Qatar where his responsibilities include reviewing drawings, inspection test plans, and ensuring projects comply with codes and standards. Previously he has held mechanical engineering and inspection roles in India, Dubai, and Qatar.

1. Habeeb Ishaq -1 of 3
Habeeb Ishaq
Mechanical Engineer
KEO PM-CM INTERNATIONAL
SUMMARY OF QUALIFICATIONS
Mechanical Engineer with more than 11 years of experience in the areas of
Sustainable Building Services & Design & Project Management, MEP
Coordination, Site Operations. Significant experience in managing projects of
wide spectrum constructionincludingHotels, ShoppingMalls,Apartments,Villas
etc. Proficiency in Sustainability, Installing, Testing & Commissioning of HVAC
Systems , Plumbing & Drainage Systems, Fire Fighting
PROFESSIONAL EXPERIENCE
KEO International Consultants, Doha, Qatar
Mechanical Engineer,January 2013 – Present
Project: Katara projects, South plaza,Commerical plaza,childrensmall, Fitness
Centre,Lusail multipurpose hall ( stadium ) Burj Marina Tower and NewDoha
International Airport.
Review Drawing & project specification. Inspection test plan (ITP), method of
statement, testing and commissioning plans/procedures and ensure that it
complieswith NFPA code andotherrelatedstandards. Follow the inspection as
per the conformance with the provision of contract document.Check all the
approval drawing related for the inspection. Review all IRF raised by the
contractor. Discussingall the technicallyissuewiththe superiors. Providingof all
necessary actionstoachieve coordinated erection works in accordance with all
drawings and specification for the project in all respect. Reviewing all the
inspection report and resolving the entire relevant problems in construction.
Reviewing test procedures for Mechanical systems. Test run Mechanical
equipments and ensure normal operating parameter.
Responsible for conducting site inspections in relation to Fire Protection on
behalf of the client and Qatar Civil Defense Department (QCDD). Preparing of
InspectionRecords,Non-Compliance Reports and Quality Action Notice (QAN)
whenevernoncompliantinstallationsare inspected. Control of the execution of
all contracted mechanical works in accordance with the approved shop
drawings to meet the required technical quality and safety.
EDUCATION
Bachelor of Mechanical
Engineer, Osmania University
PROFESSION
Mechanical Engineer
NATIONALITY
Indian
LANGUAGES
English, Urdu, Telugu & Hindi
COMPUTER SKILLS
MS Word, Excel, PowerPoint,
Windows XP & Windows7 and
Internet Applications,
AutoCAD2010

2. Habeeb Ishaq -2 of 3
Habeeb Ishaq
Mechanical Inspector
KEO PM-CM INTERNATIONAL
Superior Technologies, India
Mechanical Site Engineer, February 2011 – February 2012
B+G+3 Story Building.Verificationof contractorsworkas per approveddrawingsandspecifications.Checking
/ reviewingof MEP shopdrawings(HVAC,sewerage/Drainage, Water supply). Checking / reviewing of shop
drawingof sprinkler,fire alarm,smoke detectionandotherlife safety systems. Verification of Civil Defense
drawings submittal for authorities’ approval. Preparation of drawings for HVAC, Water, Drainage and Fire
Fighting system.
Able toperform the selectionof machinesforall kindsof buildings efficient in cost and good in performance
like these cover FCU’S, AHU’S, Chillers, etc. from the respective makers like Carrier, York, Trane etc.
Preparation of documents for Local authority submission.
Prepare co-ordination drawings with all services and coordinate with architects & structural team. Attend
weekly progress meetings contractors & coordination meetings.
Able todesign Ventilationandpipingsystems basedonASHRAE,CIBSE;uniformplumbingcode,NFPA & LEED
& sustainability.
Able to do the quality checking before the submission. Able to do the coordinate with structural team to
avoid the problem of clashes of beam with ducts pipes and opening of shear wall which is lead to site
problem.
Diar Consult, Dubai, UAE
Mechanical Inspector May 2009 – January 2010
Estella Villas, Esmeralda Villas, Carman Novella Villas, Victory Heights Dubai.
To conduct full responsibilities of site supervision including mechanical works related to the residential
componentof the project in a professional and competent manner and including full coordination of these
workswiththe architectural andstructural designanddocumentationandtorecordprogressbeingachieved.
Coordinate withall membersof staff atsite and to subscribe tothe overall office proceduresforcoordination
with the Head office and the management. Familiarize with the contract documents and check the
conformity and standards of execution with respect to the mechanical discipline to ensure adherence oref
work at site to all contract documents and the technical criteria prescribed there including checking
quantities of executed mechanical works, attending to all necessary test and verifying the results and
ensuringthatall appliedmaterialsare withinthe acceptableparametersspecified in the contracts and as per
manufactures technical data and literature as and where applicable. A copy of all approved materials and
shopdrawingto followinyourdailyinspection. Reporttoimmediatesuperiorsatsite,all the matters of non-
conformity and irregularities of works executed to record such matters consistently and systematically in
properfilingsystems.All NCRs ( non-conformance reports )are to be given to your immediate superiors on
site forreview and approval prior to issuing the same to the contractors. Witness and record all testing and
commissioning procedure and record results. Prepare a detailed list of snags at the substantial completion
stage of the project and submit to your immediate superior at site for their review and further action.

3. Habeeb Ishaq -3 of 3
Habeeb Ishaq
Mechanical Inspector
KEO PM-CM INTERNATIONAL
Kinden Corporation, Dubai, UAE
Mechanical Engineer, August 2005 – May 2008
Palm Jumeirah Vehicular Tunnel, Al Reem Island, Symphony Tower, Jumeirah & Rashidiya Car Parking, Reef
Mall. Kinden is a multinational engineering and design consultancy, providing expertise to help resolve
complex challenges presented by the built and natural environment. Kinden has been ranked top of the
Japan consultancy firms active in the Middle East with offices in Dubai, Abu Dhabi.
Design Accountabilities: Working with the team of Engineers for studying Architectural Design, preparing
HVACConceptDesigns, Preliminary Designs and Detail Designs. Designing suitable Ventilation Systems for
different applications like residential buildings, commercial buildings, industrial purpose, car parking
basementsetcas per ASHREA Standards. Designing suitable Stair Case Pressurization System as per NFPA &
local regulations. Developing Smoke Management System as per NFPA- 2001 Standards. Selecting AC
Machines(DXand chilled water systems) like Chillers, Fan Coil Units, Air Handling Units, Fresh Air handling
Units(UsingSPC Software),CoolingTowers,HeatExchangers,Package UnitsandExtract Fans. Managing Duct
Size Calculations,ChilledWaterCalculations,ChilledWaterPipe Sizing,PumpHeadCalculationsandselecting
Suitable Chilled Water Pumps. Finalizing A.C Accessories like Heat Recovery System, Thermal Wheel VAV,
Heat ExchangersforDistrictCoolingApplications, Jet Fan Selection in Car Park Ventilation Systems, VFD for
Chilled Water Pumps, Chilled Water Control Valve, Sound Attenuator, Dampers, Diffusers, Grills, Jet
Diffusers, etc. Attending meetings with Dubai Municipality Engineers and getting approvals for A.C &
Drainage Drawings
Site supervision Accountabilities: Review the Mechanical Material submittals prepared by contractors.
Checkingthe workprogressand quality of work as per the consultant design and quality plan. Attaining the
onsite meetingsfromthe contratorside with consultant. Attaining to the Inspection Requests submitted to
the consultant. Helpingthe contractorstoprepare the as build drawings. Providing the Technical Support at
the site to Site Supervisors. Preparing the work progress reports for office information.