Sahadevan Pillai has over 25 years of experience managing construction projects in various industries. He is currently the Deputy General Manager of Erection and Commissioning at Danieli India Ltd, overseeing the installation of 6000 metric tons of piping. Prior to this, he held senior project management roles at several major companies, overseeing projects such as gas cracker units, power plants, sewage treatment facilities, and more. He has extensive experience managing all aspects of complex construction projects, including budgeting, scheduling, procurement, and health and safety compliance.

1. COVER PAGE
Dear Sir/ Madam
I Would like to introduce myself with vast and wide Experience for more than
25 years in projects’ construction activities in major EPC Type Projects of oil and gas/
refinery / Petrochemical / Thermal Power / Fertilizer / Metal Industries, Etc.
I have also wide gulf experience. I am employed in M/s. DANIELI India Ltd;
from April 16, 2013 to Present. At Present I am stationed in India as a Site Manager
for LRF Plant in Neelachal Ispat in Orissa.
I have worked for reputed companies like M/S Poonglim, Fluor
International, Fluor Danieli, NESMA Alfadl, Saudi Aramco, Technip, SnamProgetti,
Chiyoda Corp, Technimount, World Italia Services, LG& C, QGPC, NODCO, GPIC,
Hyundai, CCC, Kharafi National, Qatar Gas, etc.. in Middle east& Danieli& C in Egypt.
Also worked for Larsen and Tubro, Reliance Industries, UB Engineering, Petron
Engineering, Danieli India etc.. in India
The key plants in which I was engaged in senior level with proven successful Track
Records were: Gas Cracker Unit (GCU Composite works) in Petrochemical; 3X660
MW, Power; Sulfur Recovery unit (SRU) and Acid Gas removal (AGR);
SEQUENTIAL BIO REACTOR (SBR) Sewage Water Treatment Plant; Aromatic
Complex Project; Ethylene Glycol Plant; LNG Project, Duba Bulk Plant; Diesel
Hydro Treatment Plant; New Steam and power Generation; Gas & Oil
Separation Project; Olefin Complex project; Natural Gas Liquefying Plant;
Refinery-Kerosene unit; Equate Infrastructure Project, MEG Plant and POY
Unit; Cross Country water carrier. Electric Arc Furnace; Ladle Refining
Furnace; CCM(cont. casting); TSC(Thin Slab); Blast Furnace BOF(Basic
Oxygen); PCM(Pig Iron);DRP(Direct Reduced Iron); Air Separation Plant
Software used:
SAP/ERP (Enterprises Resources Planning); MS-Project (Planning
Scheduling), Auto CAD, Auto Desk (True view), Nevis Work, SNIS (NCR
Management), SIM (Material Management), BOMDEL, MS Office, TNSJ,
Here by, I am enclosing my detailed Curriculum Vitae and hope the same will
satisfy your requirement. I remained Awaiting for the response.
With Best Regards.
Sahadevan Pillai
Email: savinash2000@yahoo.in
Skype: sahadevan.pillai1
Contact: +91 4742492060/+919961790920

2. SAHADEVAN PILLAI
Contact: +919961790920
+914742492060
Email: savinash2000@yahoo.in
Skype: sahadevan.pillai1
Objective: Looking for challenging senior positions in Project
Management / Site Management / construction Manager in an organization of high
repute.
SKILL SET
MANAGERIAL
 Developing project base lines; monitoring and controlling projects with
respect to cost, resource deployment, time over-runs and quality compliance
to ensure satisfactory execution of projects.
 Supervising construction process from the conceptual development stage
through final construction, making sure that the project gets done on time
and within budget.
 Leading a team of professionals; ensuring suitable deployment and timely
availability of manpower.
 Managing with the project department for planning & assigning the
schedules for all arrangements including the materials, manpower, tools,
plants& heavy equipments, prepare P/L accounting etc…
 Overseeing the selection contractors, consultants to complete specific pieces
of the project.
TECHNICAL
 Evaluating & determining appropriate construction delivery systems and the
most cost-effective plan and schedule for completing the project.
 Anchoring on-site construction activities to ensure completion of project within
the time & cost parameters and effective resource utilization to maximize the
output.
 Inspecting field sites to observe and evaluate condition and operability of
facilities and structures, and to collect field survey data and measurements.
 Designing and implementing stringent inspection systems and quality and test
plans to ensure high quality standards during all the stages of project.
TECHNO-COMECIAL
 Preparing project estimate & tender, finalizing contractors, checking the bills
with estimated quantities and purchasing the material for site.
 Making arrangement for all requirements, technical documentations for projects
with drawings. Deft in establishing industrial town ships & estate management.
 Liaising with consultants, contractors, sub contractors & external agencies for
determining technical specifications, approvals and obtaining statutory
clearances.

3.  Reviewing designs, drawings, specifications, BOQ & modifications required to
suit to prevailing site conditions, checking survey works with modern
equipments.
 Directing the development and implementation of key procurement strategies/
contingency plans and ensuring that strategies & plans are aligned with project
requirements.
Employment & Job Profile
Present Employer: DANIELI INDIA LTD; Technopolis, 5th
Floor, B- wing, Plot No.’ 4,
sector- 5, Salt Lake, Kolkata- 700091, West Bengal, India from April 2013 to Present.
Position: Dy. General Manager- Erection and Commissioning
Previous Employer: PETRON ENGINEERING CONSTRUCTION LTD; 6th
floor, Swastic
Chambers Chembur, Mumbai, India from May, 2012 to March, 2013.
Position: Dy. General Manager (Projects)
Employer: KHARAFI NATIONAL, PO Box 26831, Abu Dhabi, UAE, from 08 December
2007 to 15 October, 2011.
Position: Construction Superintendent
Employer: Consolidated Contractors Company (CCC)from 25 November, 2006 to 06
December, 2007
Position: Site Engineer
Employer: NESMA & Partners Contracting Co., Ltd. AL-KHOBAR 31952, Kingdom
of Saudi Arabia., from November, 2002 to October, 2006
Position: Site Engineer (Piping)
Employer: NASSER S. Al- HAJRI Corporation PO Box. 5221, Doha, Qatar
Position: Field Engineer
Employer: MANNAI Engineering Co; AL- Khobar- 31952, Saudi Arabia From January
18, 1998 to December, 1999
Position: Field Engineer
Employer: POONGLIM Industrial Co; Safat, Kuwait from February, 1996 to August
1997
Position: Site Engineer
Employer: GOPINATH ENGINEERING CO. PVT. LTD, at Hazira, Surat, Gujarat from
10/3/ 1994 to 10/1./1996
Position: Site Engineer
Employer: RAMAMOHANARAO & COMPANY;
Position: Site in charge
KEY PROJECTS & AUTHENTICITY
1) Current site NMDC-fTSR-Scope of work 6000 Metric Ton piping execution
for M/S DANIELI India Ltd;

4. 2) For PETRON, handled the Composite package of GCU (Gas Cracker Unit)
Mechanical- 25000 MT Equipment erection, 1million Inch Dia Piping
Fabrication & Erection, 2500 MT Structure Steels, also monitored a
competent team of Electrical and Instrumentation.
3) For KHARAFI, in charge of 2 million heavy wall and large bore piping
Fabrication shop.
4) For KHARAFI, a complete mechanical installation of SEQUENTIAL BIO
REACTOR (SBR) Sewage Water Treatment Plant with a capacity of
80,000M3
Per Day for ADWEA
5) For KHARAFI, Re boiler (Heater) Piping execution and Tank farm piping
erection with testing, box- up and pre commissioning in Aromatic Complex
Project
6) For KHARAFI, Overall In charge of piping erection, Hydro testing, NDT
activities, welding, housekeeping and etc…in Ethylene Glycol Plant (EG-2
7) For CCIC, a complete piping execution Sulfur Recovery Unit (SRU) LNG
Project.
8) For NESMA, Piping and structural execution at Riyadh refinery, and NGL
project
9) For NESMA, Hot tapping of flare lines and tie in works of high pressure
steams and diesel lines with tees
10) For NESMA, High pressure hydro test with a
pressure of 5500 PSI in (Gas & Oil
Separation Project) For CB&I Ltd
11) For NASSER AL-HAZRI, Kerosene unit
revamping works at QGPC.
12) For UB Engineering, a 3000 ton structural
fabrication and erection in RIL at Hazira
Familiarity
Manage Mechanical, Piping, Structural, Electrical; blasting & Painting, Quality
Control, Instrumentation, Automation etc….
 Attending Meeting with Client along with presentations. Organizing internal
meeting with Safety, Planning and all other discipline’s heads and engineers.
 Forecasting monthly, Quarterly budget for running the site.
 Control the work forces’ timing of their duty starts and intervals
 Arrange and forecast the resources for the task
 Coordination with client, consultant, Vendors, suppliers and sub agencies.
 Mobilization of manpower, machine and equipment under industrial safety
precautions
 Preparation of daily weekly monthly programs and progress report.
 Testing and pre commissioning and coordination with clients for the
commissioning activities
 Supervision of fabrication and erection of various types of jobs
 Coordination with client and consultant for site modification and execution
 Interpretation of GADs, P&IDs, Support Drawings and preparation of
Isometrics.
 Inspection and witnessing raw materials and relevant documents.
 Preparation of as built drawings.
 Preparation of punch list and punch clearance..
 Measurement checkup as per specified drawings and site conditions.

5.  Monitoring and supervision of revamping/ shut down piping activities
including hot tapping of tees and nozzles.
 Testing and box up of piping loop and system.
 Final check up of piping system by using GAD and P&ID.
 Familiar with various piping materials such as Carbon steel, Alloy steel,
Stainless steel, GI, Copper Nickel, RTR, PVC GRP, GRE HDPE etc…, as well as
various piping codes such as ASME/ ANSI B31.1, B31.3, B31.4, B31.8, API,
ASTM Standards and SAES, SAMSS, SAEP and certain knowledge in welding
metallurgy and welding inspection technology.
Professional Details
Qualification: Diploma in Mech. Engineering (Polytechnic)
(Board of Technical Education, Kerala, India)
Computer Proficiency: D C A. MS Office. MS Access.
Software Used: SAP/ERP (Enterprises Resources Planning);
Microsoft Project (Planning Scheduling), Auto
CAD, Auto Nevis Work, SNIS (NCR Management),
Auto Desk (True view), MS Outlook, SIM
(Material Management), BOMDEL, MS Office,
TNSJ.
Other Qualification: Safety Leadership Skill Path Training
First- Aid and Adult CPR Training
Total Experience: Twenty five (25) Years
Abroad Experience: ` Seventeen (17) Years
Languages: Fluent in English, Hindi, Malayalam, and Tamil
Pass Port Details:
Number- K3400790/ Issue: 23/05/2012/ Expiry: 22/05/2022/Issued at: Trivandrum
Date of birth-11 May, 1968/ Male/ Indian/ Hindu/ Married
Permanent Address
SAHADEVAN PILLAI
Karickathil veedu, Panayara, Ummannoor-PO
Kottarakara, Kollam- Dist, Kerala (India) PIN-691520
Home: +914742492060