Unit -1 Units & Dimensions.pptx
•Download as PPTX, PDF•
0 likes•1 view
The document provides an overview of key concepts in engineering mechanics including: - Statics versus dynamics and rigid bodies versus particles - Definitions of force and types of forces including concurrent, collinear, and non-concurrent forces - Components of forces in planes and spaces - Couples formed by two equal and opposite forces acting at a distance - Free body diagrams that isolate bodies to show all acting and reaction forces - Laws of mechanics including the parallelogram law, triangle law, Lami's theorem, and polygon law of forces
Report
Share
Report
Share
Recommended
16 April 2021 - Introduction to Engg Mechanics.pptx
This document provides an overview of engineering mechanics as a core subject for mechanical engineering. It discusses the importance and scope of mechanics, including its applications in machine design, strength of materials, and kinematics. The key topics covered in mechanics are then introduced, such as statics, dynamics, and the mechanics of rigid and deformable bodies. Fundamental concepts like forces, components of forces, and free body diagrams are explained. Laws for analyzing forces like the parallelogram law, triangle law, and polygon law are also covered.
1.Introduction to DOM and Static Force Analysis.pdf
This document discusses static force analysis of machinery. It provides reference textbooks on the theory of machines and mechanics. The topics covered include static force analysis, governors, inertia forces, gyroscopic forces and balancing of machinery. It also discusses the basic concepts of force, torque, and couple. The document provides examples of static force analysis for slider crank mechanisms, four-bar mechanisms, and an Atkinson cycle engine. It describes the conditions for static equilibrium and solving static force analysis problems for different loading schemes.
EM-(ME)-LECTURE NOTES-R18_08-08-2019Final_compressed.pdf
This document provides lecture notes on engineering mechanics for a third semester bachelor of technology course. It covers key topics in statics including force systems, equilibrium of rigid bodies, friction, structural analysis, centroids, moments of inertia, and virtual work. It also introduces dynamics concepts such as particle kinematics, Newton's laws, work-energy, impulse-momentum, and vibrations. The course aims to develop students' abilities to analyze static structures and prepare them for more advanced mechanics courses. It consists of 5 modules that cover the fundamental principles and problem-solving techniques of engineering mechanics.
123456789Chapter 11a_Static Force Analysis.pptx
1) The document discusses static force analysis of machinery. Static force analysis is conducted when inertia forces are negligible compared to external loads and the system is in static equilibrium.
2) Free body diagrams are used to represent all known and unknown forces acting on a body. Equations of equilibrium are then applied to analyze the forces.
3) For static equilibrium, the sum of all external forces and moments on a body must equal zero. Static force analysis procedures involve drawing free body diagrams and applying equations of equilibrium to solve for unknown forces.
Introduction to Engineering Mechanics
The document provides an overview of applied mechanics, including definitions of mechanics, engineering, applied mechanics, and their various branches and topics. It also covers fundamental concepts such as units, scalars, vectors, and trigonometry functions that are important to mechanics. Examples of static force analysis using vector operations like resolution and resultant are presented.
L01 03
This document provides information about the ME 101 Engineering Mechanics course offered by the Department of Civil Engineering at Indian Institute of Technology Guwahati. It includes the lecture and tutorial schedule, syllabus, textbook references, assessment details, and tutorial group assignments. The course covers fundamental concepts of mechanics including forces, equilibrium, structures, friction, moments of inertia, kinematics, and kinetics applied to both particles and rigid bodies using Newton's laws of motion and the law of universal gravitation.
1- Chapter 1-Introduction.pdf
1. This chapter introduces the prerequisites for structural analysis, including statics and mechanics of materials.
2. In statics, students learn about equilibrium, free body diagrams, types of supports and reactions, and drawing FBDs to determine internal and external forces.
3. Mechanics of materials teaches how structures deform and change shape under loads, including stress equations, displacement, and strain.
engineering mechanics
definition, classification and units used in engineering mechanics classification of mechanics units used in machanics
Recommended
16 April 2021 - Introduction to Engg Mechanics.pptx
This document provides an overview of engineering mechanics as a core subject for mechanical engineering. It discusses the importance and scope of mechanics, including its applications in machine design, strength of materials, and kinematics. The key topics covered in mechanics are then introduced, such as statics, dynamics, and the mechanics of rigid and deformable bodies. Fundamental concepts like forces, components of forces, and free body diagrams are explained. Laws for analyzing forces like the parallelogram law, triangle law, and polygon law are also covered.
1.Introduction to DOM and Static Force Analysis.pdf
This document discusses static force analysis of machinery. It provides reference textbooks on the theory of machines and mechanics. The topics covered include static force analysis, governors, inertia forces, gyroscopic forces and balancing of machinery. It also discusses the basic concepts of force, torque, and couple. The document provides examples of static force analysis for slider crank mechanisms, four-bar mechanisms, and an Atkinson cycle engine. It describes the conditions for static equilibrium and solving static force analysis problems for different loading schemes.
EM-(ME)-LECTURE NOTES-R18_08-08-2019Final_compressed.pdf
This document provides lecture notes on engineering mechanics for a third semester bachelor of technology course. It covers key topics in statics including force systems, equilibrium of rigid bodies, friction, structural analysis, centroids, moments of inertia, and virtual work. It also introduces dynamics concepts such as particle kinematics, Newton's laws, work-energy, impulse-momentum, and vibrations. The course aims to develop students' abilities to analyze static structures and prepare them for more advanced mechanics courses. It consists of 5 modules that cover the fundamental principles and problem-solving techniques of engineering mechanics.
123456789Chapter 11a_Static Force Analysis.pptx
1) The document discusses static force analysis of machinery. Static force analysis is conducted when inertia forces are negligible compared to external loads and the system is in static equilibrium.
2) Free body diagrams are used to represent all known and unknown forces acting on a body. Equations of equilibrium are then applied to analyze the forces.
3) For static equilibrium, the sum of all external forces and moments on a body must equal zero. Static force analysis procedures involve drawing free body diagrams and applying equations of equilibrium to solve for unknown forces.
Introduction to Engineering Mechanics
The document provides an overview of applied mechanics, including definitions of mechanics, engineering, applied mechanics, and their various branches and topics. It also covers fundamental concepts such as units, scalars, vectors, and trigonometry functions that are important to mechanics. Examples of static force analysis using vector operations like resolution and resultant are presented.
L01 03
This document provides information about the ME 101 Engineering Mechanics course offered by the Department of Civil Engineering at Indian Institute of Technology Guwahati. It includes the lecture and tutorial schedule, syllabus, textbook references, assessment details, and tutorial group assignments. The course covers fundamental concepts of mechanics including forces, equilibrium, structures, friction, moments of inertia, kinematics, and kinetics applied to both particles and rigid bodies using Newton's laws of motion and the law of universal gravitation.
1- Chapter 1-Introduction.pdf
1. This chapter introduces the prerequisites for structural analysis, including statics and mechanics of materials.
2. In statics, students learn about equilibrium, free body diagrams, types of supports and reactions, and drawing FBDs to determine internal and external forces.
3. Mechanics of materials teaches how structures deform and change shape under loads, including stress equations, displacement, and strain.
engineering mechanics
definition, classification and units used in engineering mechanics classification of mechanics units used in machanics
Engg-Mechanics-ppt-by-ujjval.pptx
1. Engineering mechanics deals with the behavior of physical bodies under the action of forces or displacements. It examines topics such as statics, dynamics, solid and fluid mechanics using principles from Newtonian physics.
2. Statics analyzes bodies at rest or in constant motion, while dynamics considers bodies in motion and the forces involved in causing and changing that motion. Rigid body mechanics examines both topics for systems that do not deform under loading.
3. Fundamental concepts in mechanics include length, time, mass, and force. Newton's laws of motion describe how forces affect motion. Moments represent the tendency of forces to cause rotation and are important in mechanics of rigid bodies.
ME2201_Unit 2.pdf
This document discusses equilibrium of rigid particles and includes the following key points:
1. It defines a free body diagram as a diagram representing all applied forces, moments, and reactions acting on a body.
2. It describes different types of loads such as concentrated, uniformly distributed, gradually increasing/decreasing, and combinations of loads.
3. It explains stable, neutral, and unstable equilibrium conditions for systems based on their potential energy when disturbed.
4. Fundamental concepts discussed include moments, couples, and Varignon's theorem relating the sum of individual force moments to the moment of the resultant force.
ME2201_Unit 2.pdf
This document discusses equilibrium of rigid particles and includes the following key points:
1. It defines a free body diagram as a diagram representing all applied forces, moments, and reactions acting on a body.
2. It describes different types of loads such as concentrated, uniformly distributed, gradually increasing/decreasing, and combinations of loads.
3. It explains stable, neutral, and unstable equilibrium conditions for systems based on their potential energy when disturbed.
4. Fundamental concepts discussed include moments, couples, and Varignon's theorem relating the sum of individual force moments to the moment of the resultant force.
DOM-1A.pptx .
1. The document discusses the analysis of forces and torques acting on mechanisms and machines. It covers topics like static force analysis, equilibrium of two and three force members, and determination of reaction forces and torques.
2. Key concepts discussed include Newton's laws of motion, types of common forces like applied, reaction and friction forces, and the use of free body diagrams and vector methods to analyze mechanisms.
3. The goal of force analysis is to determine the forces transmitted through a machine to enable proper strength design of components. Both graphical and analytical methods are described.
em ppt.pdf
This document provides information about the ME 101 Engineering Mechanics course offered by the Department of Civil Engineering at IIT Guwahati. It includes the course schedule, syllabus, textbook information, tutorial groups, and grading policy. The course covers topics in statics and dynamics including equilibrium of rigid bodies, structures, friction, virtual work, kinematics and kinetics of particles and rigid bodies. The document also provides background on fundamental concepts in mechanics such as Newton's laws of motion and gravitational attraction.
L01 03
Here are the steps to solve this problem:
1) Resolve each force into x and y components:
F1x = 40 cos 30° = 40(0.866) = 34.64 N
F1y = 40 sin 30° = 40(0.5) = 20 N
F2x = 30 cos 45° = 30(0.707) = 21.21 N
F2y = 30 sin 45° = 30(0.707) = 21.21 N
2) Sum the x and y components:
Rx = F1x + F2x = 34.64 + 21.21 = 55.85 N
Ry = F1y + F2y = 20 +
2. statics.pdf
This document provides an overview of engineering mechanics as taught in the course ME101:
1) Engineering mechanics deals with the motion and equilibrium of rigid bodies under the action of forces, and includes statics, dynamics, and rigid body mechanics. 2) Rigid body mechanics assumes bodies do not deform under loading and is a prerequisite for more advanced topics. 3) Statics analyzes equilibrium of bodies under constant forces, while dynamics analyzes accelerated motion of bodies.
Em notes
This document contains lecture notes for an Engineering Mechanics course. It lists the course code, instructor details, and a lesson plan with 30 lectures covering topics like forces, equilibrium, friction, moments of inertia, kinematics, dynamics, and motion. The lectures will discuss concepts, theories, and include example problems for each topic. Diagrams and free body diagrams are emphasized. The course appears to provide a comprehensive overview of engineering mechanics principles and their applications.
R18 b.tech.eee syllabus1
This document outlines the syllabus for the Engineering Mechanics course EE301ES for the B.Tech. II Year I Sem program at JNTU Hyderabad. The course objectives are to explain concepts related to force systems, centroids, moments of inertia, and kinetics and kinematics of particles and rigid bodies. The course is divided into 5 units covering topics such as equilibrium of rigid bodies, friction, centroids, moments of inertia, particle and rigid body motion, and kinetics of rigid bodies. At the end of the course students should be able to solve problems related to force systems, friction, centroids, moments of inertia, and kinetics.
Ekeeda - Mechanical Engineering - Strength of Materials
Mechanical Engineering is the Branch of Engineering. The mechanical engineering field requires an understanding of core areas including mechanics, dynamics, thermodynamics, materials science and structural analysis, Fluid Mechanics, Metrology and Instrumentation, Dynamics of Machinery- II, Manufacturing Processes II, Industrial Drafting and Machine Design, Engineering Graphics, Power Plant Engineering. Ekeeda offers Online Mechanical Engineering Courses for all the Subjects as per the Syllabus.
engineeringmechanics.pdf
This document provides an introduction to a course on Engineering Mechanics taught by Dr. Vela Murali. It discusses the key concepts to be covered in the course, including:
- The fundamental laws of mechanics established by Newton that form the basis for analyzing static and dynamic problems.
- An overview of the different topics to be covered, such as statics, dynamics, particle mechanics, rigid body mechanics, strength of materials, vibrations, fluid mechanics and thermodynamics.
- Examples of static and dynamic physical phenomena that can be described by engineering mechanics.
- Descriptions of different types of forces and motions, and methods for analyzing them, including free body diagrams, force resolution techniques, and
Introduction
This document provides an overview of engineering mechanics. It begins with guidelines for student behavior in lectures. It then defines mechanics as a branch of physics dealing with motion and equilibrium of bodies under forces. The document outlines the main topics in mechanics including statics, dynamics, and materials. It introduces key concepts such as particles, rigid bodies, mass, and vectors. It explains scalars, vectors, and principles of mechanics including Newton's laws of motion and the law of universal gravitation. It provides examples and diagrams to illustrate mechanical concepts and principles.
Presentation1.pdf
1. Solid mechanics deals with the behavior of solid bodies subjected to various types of loading. It is subdivided into mechanics of rigid bodies and mechanics of deformable solids.
2. Mechanics of rigid bodies is concerned with static and dynamic behavior under external forces, while mechanics of deformable solids determines internal forces and associated changes in geometry from applied loads.
3. Stresses, strains, and deflections in solids are analyzed using concepts such as stress which defines force intensity, strain which defines deformation, elasticity defined by Hooke's Law, and Poisson's ratio which relates longitudinal and lateral strains.
Engineering Mechanics.pptx
Here are the key steps to solve this problem:
1. Resolve each force into horizontal and vertical components.
2. Take the algebraic sum of the horizontal components to get the horizontal component (Fx) of the resultant.
3. Take the algebraic sum of the vertical components to get the vertical component (Fy) of the resultant.
4. Use the equations:
Resultant (R) = √(Fx)2 + (Fy)2
tan(θ) = Fy/Fx
to find the magnitude and direction of the resultant.
5. Use Varignon's theorem to locate the position of the resultant from point O.
By going through these steps, we find
Civil engineering - strength of materials
Civil Engineering is an oldest stream in engineering course. It is a professional discipline that deals with the construction and maintenance of both natural and artificial establishments. This is a professional stream with a lot of popularity. It has been broken into various other sub-streams providing specific knowledge about the topics. When it comes to a career after Civil engineering there are so many opportunities out there that civil engineers can opt for.
Mechanics is a branch of physics which deals with the state of rest
This document provides an overview of mechanical engineering and engineering mechanics. It discusses key topics including statics, dynamics, rigid bodies, Newton's laws of motion, and vector analysis. Specifically, it defines statics as the study of bodies at rest or in constant motion, while dynamics examines bodies in motion. It also outlines fundamental concepts such as mass, force, and rigid bodies. Vector quantities like force are defined, and vector operations including component resolution and force combination are demonstrated through examples.
Free body diagram
Free body diagrams are used to visualize forces acting on an object. They show the magnitude and direction of all forces using vectors. To make a free body diagram:
1. Identify the object of interest
2. Identify all direct forces on the object
3. Draw the object as a dot
4. Draw vectors for each force labeled with the force type and objects
5. Vectors should sum to zero for stationary objects or the acceleration vector for moving objects.
Resultant of forces
This document provides an overview of the content covered in the Basic Civil Engineering course. It discusses the following topics:
1. Mechanics of Rigid Bodies and Mechanics of Deformable Bodies, which make up Parts I and II of the course.
2. Concepts in mechanics of solids including resultant and equilibrium of coplanar forces, centroids, moments of inertia, kinetics principles, stresses and strains.
3. Five textbooks recommended as references for the course.
4. Definitions of terms like particle, force, scalar, vector, and rigid body.
5. Methods for resolving forces into components, obtaining the resultant of coplanar forces, and solving mechanics problems
MOM_2022_23_combined.pdf
This document contains lecture notes on mechanics of materials. It begins by defining mechanics as the branch of physics dealing with forces and motion. It then discusses the different types of mechanics, including rigid body mechanics, deformable body mechanics, and fluid mechanics. It also defines various terms related to forces, such as stress, strain, elastic constants, and modulus of elasticity. The document provides formulas for stress, strain, Hooke's law, and relationships between different elastic constants. It concludes by introducing concepts of bending moment and shear force in beams and defining shear force.
Ctm 154[1]
This document outlines the course CM 154 Statics of Rigid Bodies taught by Dr. Kofi Agyekum. It will cover topics related to engineering mechanics including types of force systems, resolution of forces, and determining the resultant of concurrent coplanar forces using various methods like the triangle law and parallelogram law. Students will learn to analyze rigid bodies that are either at rest or in static equilibrium by applying the principles of static equilibrium. Recommended textbooks are also listed.
20CS313 basics-of-english-grammar.pptx
The document discusses English grammar concepts including:
1. The present tense of the verb "to be" and its forms of am, is, are.
2. Affirmative, negative, and yes/no questions in the present tense.
3. Possessive adjectives, present continuous tense, can/can't, and prepositions of place.
It provides examples and explanations of these essential grammar topics.
ETD - Revision Class - Units 1 to 5.pptx
This document provides an overview of an engineering thermodynamics presentation by Mr. R.L. Sankarlal. It outlines 5 units that will be covered: 1) basic concepts and the first law of thermodynamics, 2) the second law and entropy, 3) steam generation and properties, 4) thermodynamic relations, and 5) psychrometry and gas mixtures. Key concepts from each unit are listed, including closed and open systems, the first and second laws, entropy, steam properties, the Rankine cycle, real gases, psychrometric processes, and gas mixtures. Diagrams are provided on the Carnot cycle, steam formation, Mollier diagrams, and the psychrometric chart. The presentation aims
More Related Content
Similar to Unit -1 Units & Dimensions.pptx
Engg-Mechanics-ppt-by-ujjval.pptx
1. Engineering mechanics deals with the behavior of physical bodies under the action of forces or displacements. It examines topics such as statics, dynamics, solid and fluid mechanics using principles from Newtonian physics.
2. Statics analyzes bodies at rest or in constant motion, while dynamics considers bodies in motion and the forces involved in causing and changing that motion. Rigid body mechanics examines both topics for systems that do not deform under loading.
3. Fundamental concepts in mechanics include length, time, mass, and force. Newton's laws of motion describe how forces affect motion. Moments represent the tendency of forces to cause rotation and are important in mechanics of rigid bodies.
ME2201_Unit 2.pdf
This document discusses equilibrium of rigid particles and includes the following key points:
1. It defines a free body diagram as a diagram representing all applied forces, moments, and reactions acting on a body.
2. It describes different types of loads such as concentrated, uniformly distributed, gradually increasing/decreasing, and combinations of loads.
3. It explains stable, neutral, and unstable equilibrium conditions for systems based on their potential energy when disturbed.
4. Fundamental concepts discussed include moments, couples, and Varignon's theorem relating the sum of individual force moments to the moment of the resultant force.
ME2201_Unit 2.pdf
This document discusses equilibrium of rigid particles and includes the following key points:
1. It defines a free body diagram as a diagram representing all applied forces, moments, and reactions acting on a body.
2. It describes different types of loads such as concentrated, uniformly distributed, gradually increasing/decreasing, and combinations of loads.
3. It explains stable, neutral, and unstable equilibrium conditions for systems based on their potential energy when disturbed.
4. Fundamental concepts discussed include moments, couples, and Varignon's theorem relating the sum of individual force moments to the moment of the resultant force.
DOM-1A.pptx .
1. The document discusses the analysis of forces and torques acting on mechanisms and machines. It covers topics like static force analysis, equilibrium of two and three force members, and determination of reaction forces and torques.
2. Key concepts discussed include Newton's laws of motion, types of common forces like applied, reaction and friction forces, and the use of free body diagrams and vector methods to analyze mechanisms.
3. The goal of force analysis is to determine the forces transmitted through a machine to enable proper strength design of components. Both graphical and analytical methods are described.
em ppt.pdf
This document provides information about the ME 101 Engineering Mechanics course offered by the Department of Civil Engineering at IIT Guwahati. It includes the course schedule, syllabus, textbook information, tutorial groups, and grading policy. The course covers topics in statics and dynamics including equilibrium of rigid bodies, structures, friction, virtual work, kinematics and kinetics of particles and rigid bodies. The document also provides background on fundamental concepts in mechanics such as Newton's laws of motion and gravitational attraction.
L01 03
Here are the steps to solve this problem:
1) Resolve each force into x and y components:
F1x = 40 cos 30° = 40(0.866) = 34.64 N
F1y = 40 sin 30° = 40(0.5) = 20 N
F2x = 30 cos 45° = 30(0.707) = 21.21 N
F2y = 30 sin 45° = 30(0.707) = 21.21 N
2) Sum the x and y components:
Rx = F1x + F2x = 34.64 + 21.21 = 55.85 N
Ry = F1y + F2y = 20 +
2. statics.pdf
This document provides an overview of engineering mechanics as taught in the course ME101:
1) Engineering mechanics deals with the motion and equilibrium of rigid bodies under the action of forces, and includes statics, dynamics, and rigid body mechanics. 2) Rigid body mechanics assumes bodies do not deform under loading and is a prerequisite for more advanced topics. 3) Statics analyzes equilibrium of bodies under constant forces, while dynamics analyzes accelerated motion of bodies.
Em notes
This document contains lecture notes for an Engineering Mechanics course. It lists the course code, instructor details, and a lesson plan with 30 lectures covering topics like forces, equilibrium, friction, moments of inertia, kinematics, dynamics, and motion. The lectures will discuss concepts, theories, and include example problems for each topic. Diagrams and free body diagrams are emphasized. The course appears to provide a comprehensive overview of engineering mechanics principles and their applications.
R18 b.tech.eee syllabus1
This document outlines the syllabus for the Engineering Mechanics course EE301ES for the B.Tech. II Year I Sem program at JNTU Hyderabad. The course objectives are to explain concepts related to force systems, centroids, moments of inertia, and kinetics and kinematics of particles and rigid bodies. The course is divided into 5 units covering topics such as equilibrium of rigid bodies, friction, centroids, moments of inertia, particle and rigid body motion, and kinetics of rigid bodies. At the end of the course students should be able to solve problems related to force systems, friction, centroids, moments of inertia, and kinetics.
Ekeeda - Mechanical Engineering - Strength of Materials
Mechanical Engineering is the Branch of Engineering. The mechanical engineering field requires an understanding of core areas including mechanics, dynamics, thermodynamics, materials science and structural analysis, Fluid Mechanics, Metrology and Instrumentation, Dynamics of Machinery- II, Manufacturing Processes II, Industrial Drafting and Machine Design, Engineering Graphics, Power Plant Engineering. Ekeeda offers Online Mechanical Engineering Courses for all the Subjects as per the Syllabus.
engineeringmechanics.pdf
This document provides an introduction to a course on Engineering Mechanics taught by Dr. Vela Murali. It discusses the key concepts to be covered in the course, including:
- The fundamental laws of mechanics established by Newton that form the basis for analyzing static and dynamic problems.
- An overview of the different topics to be covered, such as statics, dynamics, particle mechanics, rigid body mechanics, strength of materials, vibrations, fluid mechanics and thermodynamics.
- Examples of static and dynamic physical phenomena that can be described by engineering mechanics.
- Descriptions of different types of forces and motions, and methods for analyzing them, including free body diagrams, force resolution techniques, and
Introduction
This document provides an overview of engineering mechanics. It begins with guidelines for student behavior in lectures. It then defines mechanics as a branch of physics dealing with motion and equilibrium of bodies under forces. The document outlines the main topics in mechanics including statics, dynamics, and materials. It introduces key concepts such as particles, rigid bodies, mass, and vectors. It explains scalars, vectors, and principles of mechanics including Newton's laws of motion and the law of universal gravitation. It provides examples and diagrams to illustrate mechanical concepts and principles.
Presentation1.pdf
1. Solid mechanics deals with the behavior of solid bodies subjected to various types of loading. It is subdivided into mechanics of rigid bodies and mechanics of deformable solids.
2. Mechanics of rigid bodies is concerned with static and dynamic behavior under external forces, while mechanics of deformable solids determines internal forces and associated changes in geometry from applied loads.
3. Stresses, strains, and deflections in solids are analyzed using concepts such as stress which defines force intensity, strain which defines deformation, elasticity defined by Hooke's Law, and Poisson's ratio which relates longitudinal and lateral strains.
Engineering Mechanics.pptx
Here are the key steps to solve this problem:
1. Resolve each force into horizontal and vertical components.
2. Take the algebraic sum of the horizontal components to get the horizontal component (Fx) of the resultant.
3. Take the algebraic sum of the vertical components to get the vertical component (Fy) of the resultant.
4. Use the equations:
Resultant (R) = √(Fx)2 + (Fy)2
tan(θ) = Fy/Fx
to find the magnitude and direction of the resultant.
5. Use Varignon's theorem to locate the position of the resultant from point O.
By going through these steps, we find
Civil engineering - strength of materials
Civil Engineering is an oldest stream in engineering course. It is a professional discipline that deals with the construction and maintenance of both natural and artificial establishments. This is a professional stream with a lot of popularity. It has been broken into various other sub-streams providing specific knowledge about the topics. When it comes to a career after Civil engineering there are so many opportunities out there that civil engineers can opt for.
Mechanics is a branch of physics which deals with the state of rest
This document provides an overview of mechanical engineering and engineering mechanics. It discusses key topics including statics, dynamics, rigid bodies, Newton's laws of motion, and vector analysis. Specifically, it defines statics as the study of bodies at rest or in constant motion, while dynamics examines bodies in motion. It also outlines fundamental concepts such as mass, force, and rigid bodies. Vector quantities like force are defined, and vector operations including component resolution and force combination are demonstrated through examples.
Free body diagram
Free body diagrams are used to visualize forces acting on an object. They show the magnitude and direction of all forces using vectors. To make a free body diagram:
1. Identify the object of interest
2. Identify all direct forces on the object
3. Draw the object as a dot
4. Draw vectors for each force labeled with the force type and objects
5. Vectors should sum to zero for stationary objects or the acceleration vector for moving objects.
Resultant of forces
This document provides an overview of the content covered in the Basic Civil Engineering course. It discusses the following topics:
1. Mechanics of Rigid Bodies and Mechanics of Deformable Bodies, which make up Parts I and II of the course.
2. Concepts in mechanics of solids including resultant and equilibrium of coplanar forces, centroids, moments of inertia, kinetics principles, stresses and strains.
3. Five textbooks recommended as references for the course.
4. Definitions of terms like particle, force, scalar, vector, and rigid body.
5. Methods for resolving forces into components, obtaining the resultant of coplanar forces, and solving mechanics problems
MOM_2022_23_combined.pdf
This document contains lecture notes on mechanics of materials. It begins by defining mechanics as the branch of physics dealing with forces and motion. It then discusses the different types of mechanics, including rigid body mechanics, deformable body mechanics, and fluid mechanics. It also defines various terms related to forces, such as stress, strain, elastic constants, and modulus of elasticity. The document provides formulas for stress, strain, Hooke's law, and relationships between different elastic constants. It concludes by introducing concepts of bending moment and shear force in beams and defining shear force.
Ctm 154[1]
This document outlines the course CM 154 Statics of Rigid Bodies taught by Dr. Kofi Agyekum. It will cover topics related to engineering mechanics including types of force systems, resolution of forces, and determining the resultant of concurrent coplanar forces using various methods like the triangle law and parallelogram law. Students will learn to analyze rigid bodies that are either at rest or in static equilibrium by applying the principles of static equilibrium. Recommended textbooks are also listed.
Similar to Unit -1 Units & Dimensions.pptx (20)
Ekeeda - Mechanical Engineering - Strength of Materials
Ekeeda - Mechanical Engineering - Strength of Materials
Mechanics is a branch of physics which deals with the state of rest
Mechanics is a branch of physics which deals with the state of rest
More from Sankar Lal
20CS313 basics-of-english-grammar.pptx
The document discusses English grammar concepts including:
1. The present tense of the verb "to be" and its forms of am, is, are.
2. Affirmative, negative, and yes/no questions in the present tense.
3. Possessive adjectives, present continuous tense, can/can't, and prepositions of place.
It provides examples and explanations of these essential grammar topics.
ETD - Revision Class - Units 1 to 5.pptx
This document provides an overview of an engineering thermodynamics presentation by Mr. R.L. Sankarlal. It outlines 5 units that will be covered: 1) basic concepts and the first law of thermodynamics, 2) the second law and entropy, 3) steam generation and properties, 4) thermodynamic relations, and 5) psychrometry and gas mixtures. Key concepts from each unit are listed, including closed and open systems, the first and second laws, entropy, steam properties, the Rankine cycle, real gases, psychrometric processes, and gas mixtures. Diagrams are provided on the Carnot cycle, steam formation, Mollier diagrams, and the psychrometric chart. The presentation aims
NPD.pptx
The document discusses the phases of engineering design process. It describes Phase I (Conceptual Design) which involves identifying customer needs, problem definition, concept generation and selection. It then describes Phase II (Embodiment Design) which involves determining product architecture, configuration design of parts and components, and parametric design. The phases lay the foundation for detailed design in Phase III.
ETD - GATE Coachiung Class - Units 1 to 5.pptx
This document provides an overview of an engineering thermodynamics presentation. It covers 7 units:
1. Basic concepts including the first law of thermodynamics for cyclic and non-cyclic processes.
2. The second law of thermodynamics and concepts of entropy.
3. Steam generation and properties including the Rankine cycle.
4. Thermodynamic relations involving ideal gases, Maxwell relations, and the Clausius-Clapeyron equation.
5. Psychrometry and gas mixtures, including psychrometric processes and properties.
Key concepts discussed include thermodynamic systems, properties, processes, cycles, the four laws of thermodynamics, important thermodynamic properties, sign convention
Day 5 Continuous Process Improvement Techniques
An overview on PDSA, 5S, Kaizen etc are discussed in this presentation. Some insights of Supplier Partnering also dealt with sample illustrations. Activities recommended in the slides helps to create additional learning experience.
Day 4 Employee Involvement & Teamwork Skills
The various factors that influences an employee to hold a strong grip with his duties and responsibilities in an organisation is well addresses in this presentation. The learners are advised to take up the task given in the presentation to enhance learning.
Day 3 Introduction to TQM Principles
This document discusses the key principles of Total Quality Management (TQM), including customer focus, leadership, employee involvement, team management, continuous process improvement, and supplier relations. It outlines Joseph Juran's three steps of quality planning, quality control, and quality improvement. The continuous improvement process and principles of leadership, quality statements, and strategic quality planning are also summarized. Examples are provided for quality statements, strategic planning, and leadership styles.
Day 2 Focusing TQM towards Customers End
This presentation addresses the TQM Fundamental concepts and a focus towards Customer on various perspectives.
Day 1 QUALITY EVOLUTION & ITS DIMENSIONS
This document discusses the concepts and principles of Total Quality Management. It begins by asking the audience to define quality in their own words. It then discusses various definitions of quality provided by quality gurus and experts. The document outlines the key dimensions of quality for both products and services. These dimensions include performance, features, conformance, reliability, durability, and more. It provides examples of how these dimensions apply to products like cars and services like airlines. Finally, the document traces the evolution of quality concepts from the 1950s with American and Japanese experts to the Western gurus who helped develop total quality management approaches.
More from Sankar Lal (9)
Recently uploaded
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressions
K8sGPT is a tool that analyzes and diagnoses Kubernetes clusters. This presentation was used to share the requirements and dependencies to deploy K8sGPT in a local environment.
Recycled Concrete Aggregate in Construction Part III
Using recycled concrete aggregates (RCA) for pavements is crucial to achieving sustainability. Implementing RCA for new pavement can minimize carbon footprint, conserve natural resources, reduce harmful emissions, and lower life cycle costs. Compared to natural aggregate (NA), RCA pavement has fewer comprehensive studies and sustainability assessments.
New techniques for characterising damage in rock slopes.pdf
rock mass characterization and New techniques for characterising damage in rock slopes
Eric Nizeyimana's document 2006 from gicumbi to ttc nyamata handball play
this notes have been created
by Eric36 at nyamata ttc
after readings
pe book for y2sme .
Understanding Inductive Bias in Machine Learning
This presentation explores the concept of inductive bias in machine learning. It explains how algorithms come with built-in assumptions and preferences that guide the learning process. You'll learn about the different types of inductive bias and how they can impact the performance and generalizability of machine learning models.
The presentation also covers the positive and negative aspects of inductive bias, along with strategies for mitigating potential drawbacks. We'll explore examples of how bias manifests in algorithms like neural networks and decision trees.
By understanding inductive bias, you can gain valuable insights into how machine learning models work and make informed decisions when building and deploying them.
ACEP Magazine edition 4th launched on 05.06.2024
This document provides information about the third edition of the magazine "Sthapatya" published by the Association of Civil Engineers (Practicing) Aurangabad. It includes messages from current and past presidents of ACEP, memories and photos from past ACEP events, information on life time achievement awards given by ACEP, and a technical article on concrete maintenance, repairs and strengthening. The document highlights activities of ACEP and provides a technical educational article for members.
Iron and Steel Technology Roadmap - Towards more sustainable steelmaking.pdf
Iron and Steel Technology towards Sustainable Steelmaking
哪里办理(csu毕业证书)查尔斯特大学毕业证硕士学历原版一模一样
原版一模一样【微信：741003700 】【(csu毕业证书)查尔斯特大学毕业证硕士学历】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Literature Review Basics and Understanding Reference Management.pptx
Three-day training on academic research focuses on analytical tools at United Technical College, supported by the University Grant Commission, Nepal. 24-26 May 2024
学校原版美国波士顿大学毕业证学历学位证书原版一模一样
原版一模一样【微信：741003700 】【美国波士顿大学毕业证学历学位证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...University of Maribor
Slides from talk presenting:
Aleš Zamuda: Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapter and Networking.
Presentation at IcETRAN 2024 session:
"Inter-Society Networking Panel GRSS/MTT-S/CIS
Panel Session: Promoting Connection and Cooperation"
IEEE Slovenia GRSS
IEEE Serbia and Montenegro MTT-S
IEEE Slovenia CIS
11TH INTERNATIONAL CONFERENCE ON ELECTRICAL, ELECTRONIC AND COMPUTING ENGINEERING
3-6 June 2024, Niš, SerbiaThe Python for beginners. This is an advance computer language.
Python language is very important language at this time. we can easily understand this language by these notes.
Computational Engineering IITH Presentation
This Presentation will give you a brief idea about what Computational Engineering at IIT Hyderabad has to offer.
Embedded machine learning-based road conditions and driving behavior monitoring
Car accident rates have increased in recent years, resulting in losses in human lives, properties, and other financial costs. An embedded machine learning-based system is developed to address this critical issue. The system can monitor road conditions, detect driving patterns, and identify aggressive driving behaviors. The system is based on neural networks trained on a comprehensive dataset of driving events, driving styles, and road conditions. The system effectively detects potential risks and helps mitigate the frequency and impact of accidents. The primary goal is to ensure the safety of drivers and vehicles. Collecting data involved gathering information on three key road events: normal street and normal drive, speed bumps, circular yellow speed bumps, and three aggressive driving actions: sudden start, sudden stop, and sudden entry. The gathered data is processed and analyzed using a machine learning system designed for limited power and memory devices. The developed system resulted in 91.9% accuracy, 93.6% precision, and 92% recall. The achieved inference time on an Arduino Nano 33 BLE Sense with a 32-bit CPU running at 64 MHz is 34 ms and requires 2.6 kB peak RAM and 139.9 kB program flash memory, making it suitable for resource-constrained embedded systems.
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Sinan from the Delivery Hero mobile infrastructure engineering team shares a deep dive into performance acceleration with Gradle build cache optimizations. Sinan shares their journey into solving complex build-cache problems that affect Gradle builds. By understanding the challenges and solutions found in our journey, we aim to demonstrate the possibilities for faster builds. The case study reveals how overlapping outputs and cache misconfigurations led to significant increases in build times, especially as the project scaled up with numerous modules using Paparazzi tests. The journey from diagnosing to defeating cache issues offers invaluable lessons on maintaining cache integrity without sacrificing functionality.
Advanced control scheme of doubly fed induction generator for wind turbine us...
This paper describes a speed control device for generating electrical energy on an electricity network based on the doubly fed induction generator (DFIG) used for wind power conversion systems. At first, a double-fed induction generator model was constructed. A control law is formulated to govern the flow of energy between the stator of a DFIG and the energy network using three types of controllers: proportional integral (PI), sliding mode controller (SMC) and second order sliding mode controller (SOSMC). Their different results in terms of power reference tracking, reaction to unexpected speed fluctuations, sensitivity to perturbations, and resilience against machine parameter alterations are compared. MATLAB/Simulink was used to conduct the simulations for the preceding study. Multiple simulations have shown very satisfying results, and the investigations demonstrate the efficacy and power-enhancing capabilities of the suggested control system.
Recently uploaded (20)
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressions
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressions
Recycled Concrete Aggregate in Construction Part III
Recycled Concrete Aggregate in Construction Part III
basic-wireline-operations-course-mahmoud-f-radwan.pdf
basic-wireline-operations-course-mahmoud-f-radwan.pdf
New techniques for characterising damage in rock slopes.pdf
New techniques for characterising damage in rock slopes.pdf
Eric Nizeyimana's document 2006 from gicumbi to ttc nyamata handball play
Eric Nizeyimana's document 2006 from gicumbi to ttc nyamata handball play
Iron and Steel Technology Roadmap - Towards more sustainable steelmaking.pdf
Iron and Steel Technology Roadmap - Towards more sustainable steelmaking.pdf
Literature Review Basics and Understanding Reference Management.pptx
Literature Review Basics and Understanding Reference Management.pptx
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...
The Python for beginners. This is an advance computer language.
The Python for beginners. This is an advance computer language.
Embedded machine learning-based road conditions and driving behavior monitoring
Embedded machine learning-based road conditions and driving behavior monitoring
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Advanced control scheme of doubly fed induction generator for wind turbine us...
Advanced control scheme of doubly fed induction generator for wind turbine us...
Unit -1 Units & Dimensions.pptx
- 1. 20ME205 – Engineering Mechanics ( Core – II Subject) Unit – I Units & Dimensions, Laws of Mechanics Date: 19 April 2021 A Presentation by: Mr. R.L. SANKARLAL, M.E., MISTE., MSAE., (Ph.D)., Asst. Professor (Gr-II) /Mech., R.M.K. Engineering College
- 2. Key Take Away points… • Statics Vs Dynamics • Rigid Body Vs Particle • Definition of Force, Types. • Components of Forces • Equilibrium • Resultant & Equilibrant • Couple & Moment
- 3. Types of Forces Concurrent coplanar forces Collinear forces Concurrent non-coplanar Non Concurrent coplanar (Parallel)
- 4. Components of a Force PlaneForce SpaceForce
- 5. Couple Two equal and opposite forces are acting at some distance forming a couple
- 6. How Rotational Effect will change with distance?
- 7. Free Body Diagram (FBD) Isolated body from the structure of machinery which shows all the forces and reaction forces acting on it.
- 8. Examples for free body diagram
- 14. Parallelogram law of Forces: Two forces acting on a particle can be replaced by a single force (RESULTANT) by drawing diagonal of the parallelogram which has the sides equal to the given forces.
- 16. Triangle Law of Forces: Triangle law states that if three concurrent coplanar forces are acting at a point be represented in magnitude and direction by the sides of a triangle, then they are in static equilibrium.
- 17. Lami’s Theorem: Lami’s Theorem states that if three concurrent coplanar forces are acting at a point, then each force is directly proportional to the sine of the angle between the other two forces.
- 18. Lami’s theorem considering only the equilibrium of three forces acting on a point not the stress acting through a ropes or strings The principle of transmissibility is applicable only for rigid bodies not for deformable bodies
- 19. F1 F2 F5 F4 F3 A B E D C Polygon Law of Forces “If many number of forces acting at a point can be represented as a sides of a polygon, then they are in equilibrium”