1. The document outlines GPRS and UMTS architecture and protocols, including a discussion of 3GPP organizational structure and technical working groups.
2. It describes the evolution of mobile IP integration in UMTS through a staged 3-step approach, beginning with offering mobile IP service in UMTS Release 99, and progressing to using mobile IP for intra-system mobility.
3. An overview of the proposed all-IP architecture for UMTS Release 2000 is presented, including new entities like the home subscriber server and components for voice over IP infrastructure.
LTE mobile technology has changed our lifestyles significantly with high data rates and low latency. With the
diverse services and requirements demanded from today's mobile industry, however, LTE by itself is not capable
of handling the necessary throughput, latency and reliability. Compared to LTE, 5G enables much higher data
rates and ultra-low latency by using wide spectrum of high-frequency bands and advanced networking
technology. 5G targets twenty times higher data rates and much shorter latency than LTE. As a result, more
reliable transmissions and higher UE connection density will be possible in the 5G network.
LTE, LTE A, and LTE A Pro Migration to 5G Training : Tonex TrainingBryan Len
LTE, LTE-A, and LTE-A Pro Migration to 5G Training covers LTE, LTE-Advanced, LTE-Advanced Pro, features and enhancements and migration towards 5G. Other topics include: 5G NR, Air Interface Architecture, 5G Core (5GC) Architecture, Nodes, Interfaces, and Operation.
Topics Include:
5GC Overview
5G Technology Overview
5G System Survey
5G Architecture and Interfaces
5G Network Services
5G-NR Architecture, Interfaces, Protocols and Operations
5G-NR Signaling
5G Core (5GC) Architecture, Interfaces, Protocols and Operations
Multi-Access Edge Computing (MEC)
Advanced LPWA for IoT
5G Signaling and Operations
5G Protocol and Architecture
5GC Network Solutions
5G Network Design and Optimization
5G Network Roll-Out
5G Capacity Planning
5G For Non-Engineers and Managers
5G RAN Signaling
5G RF Engineering
5G RF Planning
Learning Objectives:
After completing this course, the student will be able to:
Describe the evolution from LTE/LTE-A and LTE-A Pro to 5G
Summarize LTE-A pro architecture enhancements towards 5G
Describe the fundamentals of 5G networks
Illustrate the architecture of the 5G network including 5G NR,5GC
Describe Enhanced Mobile Broadband (eMBB), Massive Machine Type (mMTC) Communications and Ultra-Reliable and Low Latency Communications (URLLC) features in 5G
Identify key 5G network functions, interfaces, protocols and interworking elements
Describe how the 5G NR works
Describe 5GC network functions and interfaces
Compare 5G Service Based Architecture vs. Reference Point Architecture
Describe ingratiation paths to 5G
Courses Material, Tools and Guides, Outlines:
Evolution from LTE/LTE-A Pro to 5G
Overview of 5G Network Services
5G Radio and Core Network Architecture
Network Slicing in 5G
Architecture Evolution from LTE/LTE-A and LTE-A Pro to 5G NR
Cloud and Open RAN Architectures
Control and User Plane Architecture and Bearer Types
Introduction 5G Core Network (5GC)
Overview of 5G Core Network (5GC) Network Entities
5G Network Deployment and Migration Paths
Case Studies
Request more information about LTE, LTE-A, and LTE-A Pro Migration to 5G Training. Visit Tonex.com link below
https://www.tonex.com/training-courses/lte-lte-a-and-lte-a-pro-migration-to-5g-training/
Description and comparison of 3G, 4G and 5G Core Networks. You can find my detailed report in https://medium.com/@sarpkoksal/core-network-evolution-3g-vs-4g-vs-5g-7738267503c7
CNCF TUG (Telecom User Group) Ike Alisson 5G New Service Capabilities Rev pa10Ike Alisson
5G New Service Capabilities (with an overview on the synergy between 5G CN and RAN (O-RAN Specifications) via CUPS and some of the Enhancements for URLLC UCs enhancements
Beginners: Different Types of RAN Architectures - Distributed, Centralized & ...3G4G
In this basic tutorial we look at different types of RAN architectures that are always being discussed. We start with the Distributed RAN (D-RAN) and then look at Centralized and Cloud RAN (both referred to as C-RAN) architectures. We also quickly look at RAN functional splits for 5G and then tie this all together.
We also look at how Samsung and Nokia discuss these architectures in the context of 5G.
All our #3G4G5G slides and videos are available at:
Videos: https://www.youtube.com/3G4G5G
Slides: https://www.slideshare.net/3G4GLtd
Open RAN Page: https://www.3g4g.co.uk/OpenRAN/
5G Page: https://www.3g4g.co.uk/5G/
Free Training Videos: https://www.3g4g.co.uk/Training/
3GPP SON Series: SON in 3GPP Release-8 – Self-configuration3G4G
This SON tutorial is part of the 3GPP Self-Organizing Networks series (#3GPPSONSeries). In this part we will look at what features were defined as part of 3GPP Release-8
The most basic functionality where SON helps is when a new eNodeB is switched on. This functionality is known as self-configuration which helps eNodeB decide on its parameters, codes, power levels, etc.
All our #3G4G5G slides and videos are available at:
Videos: https://www.youtube.com/3G4G5G
Slides: https://www.slideshare.net/3G4GLtd
5G Page: https://www.3g4g.co.uk/5G/
Free Training Videos: https://www.3g4g.co.uk/Training/
This video / presentation looks at how RRC states have changed from 3G to 4G and not to 5G NR. Why was the new RRC_INACTIVE state introduced; how will it reduce the latency which will help URLLC; what are the different NAS states in 4G EPC and 5G Core and how do they map to RRC and UE states. Finally we look at some basic signalling example to understand the RRC Resume and Inactive state.
All our #3G4G5G slides and videos are available at:
Videos: https://www.youtube.com/3G4G5G
Slides: https://www.slideshare.net/3G4GLtd
5G Page: https://www.3g4g.co.uk/5G/
Free Training Videos: https://www.3g4g.co.uk/Training/
Objective is to include the brief insight on 5G network architecture and standard progress, Accumulated it from different paper/journal, vendor’s white paper and different blog.
Technology Manager Andreas Roessler covers 5G basics in this keynote presentation at the RF Lumination 2019 conference in February 2019.
RF Lumination 2019
"Meet 158+ years of RF design & test expertise at one event. If they can't answer your question, it must be a really good question!"
Watch all the presentations here:
https://www.rohde-schwarz-usa.com/RFLuminationContent.html
Andreas Roessler is the Rohde & Schwarz Technology Manager focused on UMTS Long Term Evolution (LTE) and LTE-Advanced. With responsibility for the strategic marketing and product portfolio development for LTE/LTE-Advanced, Andreas follows the standardization process in 3GPP very closely, particularly on core specifications as well as protocol conformance, RRM and RF conformance specifications for device and base stations testing. He graduated from Otto-von-Guericke University in Magdeburg, Germany, and received a Master's Degree in communication engineering.
Beginners: 5G Terminology (Updated - Feb 2019)3G4G
An updated short presentation and video looking at 5G terminology that is being used in 3GPP standards and specifications.
Terms such as NG-RAN, NR, ng-eNB, en-gNB, RIT, SRIT, Option 3, etc. will be discussed
Describes key network elements and interfaces of LTE architecture. The steps of LTE/EPC Attach procedure are also illustrated.
Video at: https://www.youtube.com/playlist?list=PLgQvzsPaZX_bimBc5Wu4m6-cVD4bZDav9
LTE mobile technology has changed our lifestyles significantly with high data rates and low latency. With the
diverse services and requirements demanded from today's mobile industry, however, LTE by itself is not capable
of handling the necessary throughput, latency and reliability. Compared to LTE, 5G enables much higher data
rates and ultra-low latency by using wide spectrum of high-frequency bands and advanced networking
technology. 5G targets twenty times higher data rates and much shorter latency than LTE. As a result, more
reliable transmissions and higher UE connection density will be possible in the 5G network.
LTE, LTE A, and LTE A Pro Migration to 5G Training : Tonex TrainingBryan Len
LTE, LTE-A, and LTE-A Pro Migration to 5G Training covers LTE, LTE-Advanced, LTE-Advanced Pro, features and enhancements and migration towards 5G. Other topics include: 5G NR, Air Interface Architecture, 5G Core (5GC) Architecture, Nodes, Interfaces, and Operation.
Topics Include:
5GC Overview
5G Technology Overview
5G System Survey
5G Architecture and Interfaces
5G Network Services
5G-NR Architecture, Interfaces, Protocols and Operations
5G-NR Signaling
5G Core (5GC) Architecture, Interfaces, Protocols and Operations
Multi-Access Edge Computing (MEC)
Advanced LPWA for IoT
5G Signaling and Operations
5G Protocol and Architecture
5GC Network Solutions
5G Network Design and Optimization
5G Network Roll-Out
5G Capacity Planning
5G For Non-Engineers and Managers
5G RAN Signaling
5G RF Engineering
5G RF Planning
Learning Objectives:
After completing this course, the student will be able to:
Describe the evolution from LTE/LTE-A and LTE-A Pro to 5G
Summarize LTE-A pro architecture enhancements towards 5G
Describe the fundamentals of 5G networks
Illustrate the architecture of the 5G network including 5G NR,5GC
Describe Enhanced Mobile Broadband (eMBB), Massive Machine Type (mMTC) Communications and Ultra-Reliable and Low Latency Communications (URLLC) features in 5G
Identify key 5G network functions, interfaces, protocols and interworking elements
Describe how the 5G NR works
Describe 5GC network functions and interfaces
Compare 5G Service Based Architecture vs. Reference Point Architecture
Describe ingratiation paths to 5G
Courses Material, Tools and Guides, Outlines:
Evolution from LTE/LTE-A Pro to 5G
Overview of 5G Network Services
5G Radio and Core Network Architecture
Network Slicing in 5G
Architecture Evolution from LTE/LTE-A and LTE-A Pro to 5G NR
Cloud and Open RAN Architectures
Control and User Plane Architecture and Bearer Types
Introduction 5G Core Network (5GC)
Overview of 5G Core Network (5GC) Network Entities
5G Network Deployment and Migration Paths
Case Studies
Request more information about LTE, LTE-A, and LTE-A Pro Migration to 5G Training. Visit Tonex.com link below
https://www.tonex.com/training-courses/lte-lte-a-and-lte-a-pro-migration-to-5g-training/
Description and comparison of 3G, 4G and 5G Core Networks. You can find my detailed report in https://medium.com/@sarpkoksal/core-network-evolution-3g-vs-4g-vs-5g-7738267503c7
CNCF TUG (Telecom User Group) Ike Alisson 5G New Service Capabilities Rev pa10Ike Alisson
5G New Service Capabilities (with an overview on the synergy between 5G CN and RAN (O-RAN Specifications) via CUPS and some of the Enhancements for URLLC UCs enhancements
Beginners: Different Types of RAN Architectures - Distributed, Centralized & ...3G4G
In this basic tutorial we look at different types of RAN architectures that are always being discussed. We start with the Distributed RAN (D-RAN) and then look at Centralized and Cloud RAN (both referred to as C-RAN) architectures. We also quickly look at RAN functional splits for 5G and then tie this all together.
We also look at how Samsung and Nokia discuss these architectures in the context of 5G.
All our #3G4G5G slides and videos are available at:
Videos: https://www.youtube.com/3G4G5G
Slides: https://www.slideshare.net/3G4GLtd
Open RAN Page: https://www.3g4g.co.uk/OpenRAN/
5G Page: https://www.3g4g.co.uk/5G/
Free Training Videos: https://www.3g4g.co.uk/Training/
3GPP SON Series: SON in 3GPP Release-8 – Self-configuration3G4G
This SON tutorial is part of the 3GPP Self-Organizing Networks series (#3GPPSONSeries). In this part we will look at what features were defined as part of 3GPP Release-8
The most basic functionality where SON helps is when a new eNodeB is switched on. This functionality is known as self-configuration which helps eNodeB decide on its parameters, codes, power levels, etc.
All our #3G4G5G slides and videos are available at:
Videos: https://www.youtube.com/3G4G5G
Slides: https://www.slideshare.net/3G4GLtd
5G Page: https://www.3g4g.co.uk/5G/
Free Training Videos: https://www.3g4g.co.uk/Training/
This video / presentation looks at how RRC states have changed from 3G to 4G and not to 5G NR. Why was the new RRC_INACTIVE state introduced; how will it reduce the latency which will help URLLC; what are the different NAS states in 4G EPC and 5G Core and how do they map to RRC and UE states. Finally we look at some basic signalling example to understand the RRC Resume and Inactive state.
All our #3G4G5G slides and videos are available at:
Videos: https://www.youtube.com/3G4G5G
Slides: https://www.slideshare.net/3G4GLtd
5G Page: https://www.3g4g.co.uk/5G/
Free Training Videos: https://www.3g4g.co.uk/Training/
Objective is to include the brief insight on 5G network architecture and standard progress, Accumulated it from different paper/journal, vendor’s white paper and different blog.
Technology Manager Andreas Roessler covers 5G basics in this keynote presentation at the RF Lumination 2019 conference in February 2019.
RF Lumination 2019
"Meet 158+ years of RF design & test expertise at one event. If they can't answer your question, it must be a really good question!"
Watch all the presentations here:
https://www.rohde-schwarz-usa.com/RFLuminationContent.html
Andreas Roessler is the Rohde & Schwarz Technology Manager focused on UMTS Long Term Evolution (LTE) and LTE-Advanced. With responsibility for the strategic marketing and product portfolio development for LTE/LTE-Advanced, Andreas follows the standardization process in 3GPP very closely, particularly on core specifications as well as protocol conformance, RRM and RF conformance specifications for device and base stations testing. He graduated from Otto-von-Guericke University in Magdeburg, Germany, and received a Master's Degree in communication engineering.
Beginners: 5G Terminology (Updated - Feb 2019)3G4G
An updated short presentation and video looking at 5G terminology that is being used in 3GPP standards and specifications.
Terms such as NG-RAN, NR, ng-eNB, en-gNB, RIT, SRIT, Option 3, etc. will be discussed
Describes key network elements and interfaces of LTE architecture. The steps of LTE/EPC Attach procedure are also illustrated.
Video at: https://www.youtube.com/playlist?list=PLgQvzsPaZX_bimBc5Wu4m6-cVD4bZDav9
Presentation on 1G/2G/3G/4G/5G/Cellular & Wireless TechnologiesKaushal Kaith
This Presentation is explaining all about the Generations of Mobile or Cellular Technology (1G/2G/2.5/ 3G/4g/5G). This explain the invented details ,features,drawbacks,look of wireless models and comparison and evolution of technology from 1G to 5G and also explaining about wireless application and their services.
In three short webinars, on the morning of April 9, 3GPP presented some conclusions and highlights of the 3GPP Technical Specification Group (TSG) Plenary meetings, held as e-meetings during the week – March 16-20. At 12:00 CET – Georg Mayer, TSG SA Chair, shared his thoughts on the progress of the last Plenary of the week, SA87-E. Video could be watched here: https://vimeo.com/407214100
*** SHARED WITH PERMISSION ***
Essentials of Automations: Optimizing FME Workflows with ParametersSafe Software
Are you looking to streamline your workflows and boost your projects’ efficiency? Do you find yourself searching for ways to add flexibility and control over your FME workflows? If so, you’re in the right place.
Join us for an insightful dive into the world of FME parameters, a critical element in optimizing workflow efficiency. This webinar marks the beginning of our three-part “Essentials of Automation” series. This first webinar is designed to equip you with the knowledge and skills to utilize parameters effectively: enhancing the flexibility, maintainability, and user control of your FME projects.
Here’s what you’ll gain:
- Essentials of FME Parameters: Understand the pivotal role of parameters, including Reader/Writer, Transformer, User, and FME Flow categories. Discover how they are the key to unlocking automation and optimization within your workflows.
- Practical Applications in FME Form: Delve into key user parameter types including choice, connections, and file URLs. Allow users to control how a workflow runs, making your workflows more reusable. Learn to import values and deliver the best user experience for your workflows while enhancing accuracy.
- Optimization Strategies in FME Flow: Explore the creation and strategic deployment of parameters in FME Flow, including the use of deployment and geometry parameters, to maximize workflow efficiency.
- Pro Tips for Success: Gain insights on parameterizing connections and leveraging new features like Conditional Visibility for clarity and simplicity.
We’ll wrap up with a glimpse into future webinars, followed by a Q&A session to address your specific questions surrounding this topic.
Don’t miss this opportunity to elevate your FME expertise and drive your projects to new heights of efficiency.
GraphRAG is All You need? LLM & Knowledge GraphGuy Korland
Guy Korland, CEO and Co-founder of FalkorDB, will review two articles on the integration of language models with knowledge graphs.
1. Unifying Large Language Models and Knowledge Graphs: A Roadmap.
https://arxiv.org/abs/2306.08302
2. Microsoft Research's GraphRAG paper and a review paper on various uses of knowledge graphs:
https://www.microsoft.com/en-us/research/blog/graphrag-unlocking-llm-discovery-on-narrative-private-data/
PHP Frameworks: I want to break free (IPC Berlin 2024)Ralf Eggert
In this presentation, we examine the challenges and limitations of relying too heavily on PHP frameworks in web development. We discuss the history of PHP and its frameworks to understand how this dependence has evolved. The focus will be on providing concrete tips and strategies to reduce reliance on these frameworks, based on real-world examples and practical considerations. The goal is to equip developers with the skills and knowledge to create more flexible and future-proof web applications. We'll explore the importance of maintaining autonomy in a rapidly changing tech landscape and how to make informed decisions in PHP development.
This talk is aimed at encouraging a more independent approach to using PHP frameworks, moving towards a more flexible and future-proof approach to PHP development.
Accelerate your Kubernetes clusters with Varnish CachingThijs Feryn
A presentation about the usage and availability of Varnish on Kubernetes. This talk explores the capabilities of Varnish caching and shows how to use the Varnish Helm chart to deploy it to Kubernetes.
This presentation was delivered at K8SUG Singapore. See https://feryn.eu/presentations/accelerate-your-kubernetes-clusters-with-varnish-caching-k8sug-singapore-28-2024 for more details.
UiPath Test Automation using UiPath Test Suite series, part 3DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 3. In this session, we will cover desktop automation along with UI automation.
Topics covered:
UI automation Introduction,
UI automation Sample
Desktop automation flow
Pradeep Chinnala, Senior Consultant Automation Developer @WonderBotz and UiPath MVP
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
UiPath Test Automation using UiPath Test Suite series, part 4DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 4. In this session, we will cover Test Manager overview along with SAP heatmap.
The UiPath Test Manager overview with SAP heatmap webinar offers a concise yet comprehensive exploration of the role of a Test Manager within SAP environments, coupled with the utilization of heatmaps for effective testing strategies.
Participants will gain insights into the responsibilities, challenges, and best practices associated with test management in SAP projects. Additionally, the webinar delves into the significance of heatmaps as a visual aid for identifying testing priorities, areas of risk, and resource allocation within SAP landscapes. Through this session, attendees can expect to enhance their understanding of test management principles while learning practical approaches to optimize testing processes in SAP environments using heatmap visualization techniques
What will you get from this session?
1. Insights into SAP testing best practices
2. Heatmap utilization for testing
3. Optimization of testing processes
4. Demo
Topics covered:
Execution from the test manager
Orchestrator execution result
Defect reporting
SAP heatmap example with demo
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
Dev Dives: Train smarter, not harder – active learning and UiPath LLMs for do...UiPathCommunity
💥 Speed, accuracy, and scaling – discover the superpowers of GenAI in action with UiPath Document Understanding and Communications Mining™:
See how to accelerate model training and optimize model performance with active learning
Learn about the latest enhancements to out-of-the-box document processing – with little to no training required
Get an exclusive demo of the new family of UiPath LLMs – GenAI models specialized for processing different types of documents and messages
This is a hands-on session specifically designed for automation developers and AI enthusiasts seeking to enhance their knowledge in leveraging the latest intelligent document processing capabilities offered by UiPath.
Speakers:
👨🏫 Andras Palfi, Senior Product Manager, UiPath
👩🏫 Lenka Dulovicova, Product Program Manager, UiPath
Securing your Kubernetes cluster_ a step-by-step guide to success !KatiaHIMEUR1
Today, after several years of existence, an extremely active community and an ultra-dynamic ecosystem, Kubernetes has established itself as the de facto standard in container orchestration. Thanks to a wide range of managed services, it has never been so easy to set up a ready-to-use Kubernetes cluster.
However, this ease of use means that the subject of security in Kubernetes is often left for later, or even neglected. This exposes companies to significant risks.
In this talk, I'll show you step-by-step how to secure your Kubernetes cluster for greater peace of mind and reliability.
GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using Deplo...James Anderson
Effective Application Security in Software Delivery lifecycle using Deployment Firewall and DBOM
The modern software delivery process (or the CI/CD process) includes many tools, distributed teams, open-source code, and cloud platforms. Constant focus on speed to release software to market, along with the traditional slow and manual security checks has caused gaps in continuous security as an important piece in the software supply chain. Today organizations feel more susceptible to external and internal cyber threats due to the vast attack surface in their applications supply chain and the lack of end-to-end governance and risk management.
The software team must secure its software delivery process to avoid vulnerability and security breaches. This needs to be achieved with existing tool chains and without extensive rework of the delivery processes. This talk will present strategies and techniques for providing visibility into the true risk of the existing vulnerabilities, preventing the introduction of security issues in the software, resolving vulnerabilities in production environments quickly, and capturing the deployment bill of materials (DBOM).
Speakers:
Bob Boule
Robert Boule is a technology enthusiast with PASSION for technology and making things work along with a knack for helping others understand how things work. He comes with around 20 years of solution engineering experience in application security, software continuous delivery, and SaaS platforms. He is known for his dynamic presentations in CI/CD and application security integrated in software delivery lifecycle.
Gopinath Rebala
Gopinath Rebala is the CTO of OpsMx, where he has overall responsibility for the machine learning and data processing architectures for Secure Software Delivery. Gopi also has a strong connection with our customers, leading design and architecture for strategic implementations. Gopi is a frequent speaker and well-known leader in continuous delivery and integrating security into software delivery.
Elevating Tactical DDD Patterns Through Object CalisthenicsDorra BARTAGUIZ
After immersing yourself in the blue book and its red counterpart, attending DDD-focused conferences, and applying tactical patterns, you're left with a crucial question: How do I ensure my design is effective? Tactical patterns within Domain-Driven Design (DDD) serve as guiding principles for creating clear and manageable domain models. However, achieving success with these patterns requires additional guidance. Interestingly, we've observed that a set of constraints initially designed for training purposes remarkably aligns with effective pattern implementation, offering a more ‘mechanical’ approach. Let's explore together how Object Calisthenics can elevate the design of your tactical DDD patterns, offering concrete help for those venturing into DDD for the first time!