Ujaas Energy - Rooftop PPT AURAIYA
•Download as PPTX, PDF•
0 likes•242 views
This presentation summarizes 30 rooftop solar PV projects totaling 60kW AC capacity that were allocated by NTPC to buildings in Auraiya, India. Key details include the multi-crystalline module and inverter specifications, layout drawings, expected annual energy production of 82,710 kWh when accounting for losses, and the project schedule. Shadow analysis diagrams are also included to assess solar access throughout the year.
Report
Share
Report
Share
Recommended
2014 PV Performance Modeling Workshop: PVSim Update: Mike Anderson, SunPower ...
2014 PV Performance Modeling Workshop: PVSim Update: Mike Anderson, SunPower ...Sandia National Laboratories: Energy & Climate: Renewables
The document summarizes recent updates to PVSim, a photovoltaic performance modeling software. It describes updates to the soiling and snow loss models. The soiling model now uses location-based classification instead of user-selected regions, considers system tilt, uses over 150 systems of validation data across 6 years instead of 46 systems over 1 year, and models soiling effects globally instead of just California. The new snow loss model accounts for snow accumulation and melting on PV modules based on weather data, models snow shedding effects based on panel tilt and coefficients of friction, and was validated using 3 years of data from 21 sites with 60 systems with different tilt angles.04 final - hobbs lave wvm solar portfolios - pvpmc
04 final - hobbs lave wvm solar portfolios - pvpmcSandia National Laboratories: Energy & Climate: Renewables
The document describes a MATLAB toolbox that simulates high-frequency solar PV generation profiles for large portfolios in the southeastern US. The toolbox models sub-hourly solar output using irradiance and cloud speed data from multiple years. It accounts for various locations, capacities, and panel types. The toolbox was developed for utility planning studies requiring frequent solar output variations. It uses a wavelet variability model to generate realistic high-frequency profiles while preserving important metrics like monthly energy and ramp rates.Spicy schematics facebook post collection 2012 13 (SWAN applications)
This document contains a collection of 37 Facebook posts from the page "Spicy Schematics - ischematics.com" from 2012-2013 showcasing circuit simulations and models created using the Spicy Schematics SWAN simulation software. The posts include simulations of transmission lines, cables, amplifiers, oscillators, and digital circuits along with comparisons between different simulation methods. Many of the posts provide simulation results, diagrams, and discussion of modeling techniques.
Project green buildings (be)
This document discusses the design of a green building with optimal solar energy generation and human comfort. It outlines the steps to size a solar photovoltaic system to meet the building's power needs. Computational fluid dynamics is used to model air flow and ventilation in the building. The modeling shows stagnation points and improved ventilation with the addition of solar chimneys and strategically placed vents and outlets.
8b80ade8 7b96-4114-9e36-76dcf21dc74d-150219134514-conversion-gate02 (1) (1) (...
Pragati Power Station in Delhi generates electricity using a combination of gas turbines and steam turbines with a total installed capacity of 330 MW. It uses treated sewage water and environmentally friendly technologies to minimize its environmental impact. Key performance metrics like availability, plant load factor and auxiliary power consumption are regularly monitored and have improved over time, with the station ranking among the top 3 in India for performance in 2011-2012. Ongoing initiatives help enhance the local environment through tree planting and use of non-river water. Monitoring operational data helps optimize power generation at the station.
55 reinders performance_modelling_of_pv_systems_in_a_virtual_environment
55 reinders performance_modelling_of_pv_systems_in_a_virtual_environmentSandia National Laboratories: Energy & Climate: Renewables
VR4PV is a virtual reality software that enables fast visualization and simulation of photovoltaic (PV) systems. It allows users to render shades on PV systems from surrounding objects or self-shading during the design process. VR4PV has been used for cases involving PV integration in the built environment, designing movable PV boats, shadow analysis of a PV-powered street lamp, and allocating PV and renewable energy technologies on small islands. Future work may involve extending VR4PV's capabilities and transitioning to more performant gaming engines like Unity to improve processing speed while separating animation from energy simulations.Modeling the Irradiance and Temperature Dependence of PV Modules in PVsyst
This document discusses modeling the irradiance and temperature dependence of PV modules in PVsyst software. It presents four modeling approaches: the PVsyst standard model, a "V6 tool" model, an "only G - then T" model, and a "G-T matrix" model. Results show the "only G - then T" and "G-T matrix" models more accurately predict maximum power (Pmax) over varying irradiance (G) and temperature (T) conditions compared to the standard and V6 tool models, with the "G-T matrix" model having the best fit to measurement data overall. Both new models also improve the accuracy of energy yield forecasts for different locations compared to
40 zhang bificial_module_overview
This document discusses bifacial photovoltaic modules and the challenges in modelling their performance and economics. It provides a brief history of bifacial modules and lists current suppliers of different bifacial module technologies. It identifies several key factors that impact the gross margin from bifacial systems, including module yield and capital expenditures, as well as the module design, installation environment, and electrical system architecture. Specific modelling challenges discussed include variables in bifacial flash testing, the impact of albedo from different ground covers, mechanical mounting designs, and electrical considerations like optimal inverter sizing and requirements for multi-input microinverters.
Recommended
2014 PV Performance Modeling Workshop: PVSim Update: Mike Anderson, SunPower ...
2014 PV Performance Modeling Workshop: PVSim Update: Mike Anderson, SunPower ...Sandia National Laboratories: Energy & Climate: Renewables
The document summarizes recent updates to PVSim, a photovoltaic performance modeling software. It describes updates to the soiling and snow loss models. The soiling model now uses location-based classification instead of user-selected regions, considers system tilt, uses over 150 systems of validation data across 6 years instead of 46 systems over 1 year, and models soiling effects globally instead of just California. The new snow loss model accounts for snow accumulation and melting on PV modules based on weather data, models snow shedding effects based on panel tilt and coefficients of friction, and was validated using 3 years of data from 21 sites with 60 systems with different tilt angles.04 final - hobbs lave wvm solar portfolios - pvpmc
04 final - hobbs lave wvm solar portfolios - pvpmcSandia National Laboratories: Energy & Climate: Renewables
The document describes a MATLAB toolbox that simulates high-frequency solar PV generation profiles for large portfolios in the southeastern US. The toolbox models sub-hourly solar output using irradiance and cloud speed data from multiple years. It accounts for various locations, capacities, and panel types. The toolbox was developed for utility planning studies requiring frequent solar output variations. It uses a wavelet variability model to generate realistic high-frequency profiles while preserving important metrics like monthly energy and ramp rates.Spicy schematics facebook post collection 2012 13 (SWAN applications)
This document contains a collection of 37 Facebook posts from the page "Spicy Schematics - ischematics.com" from 2012-2013 showcasing circuit simulations and models created using the Spicy Schematics SWAN simulation software. The posts include simulations of transmission lines, cables, amplifiers, oscillators, and digital circuits along with comparisons between different simulation methods. Many of the posts provide simulation results, diagrams, and discussion of modeling techniques.
Project green buildings (be)
This document discusses the design of a green building with optimal solar energy generation and human comfort. It outlines the steps to size a solar photovoltaic system to meet the building's power needs. Computational fluid dynamics is used to model air flow and ventilation in the building. The modeling shows stagnation points and improved ventilation with the addition of solar chimneys and strategically placed vents and outlets.
8b80ade8 7b96-4114-9e36-76dcf21dc74d-150219134514-conversion-gate02 (1) (1) (...
Pragati Power Station in Delhi generates electricity using a combination of gas turbines and steam turbines with a total installed capacity of 330 MW. It uses treated sewage water and environmentally friendly technologies to minimize its environmental impact. Key performance metrics like availability, plant load factor and auxiliary power consumption are regularly monitored and have improved over time, with the station ranking among the top 3 in India for performance in 2011-2012. Ongoing initiatives help enhance the local environment through tree planting and use of non-river water. Monitoring operational data helps optimize power generation at the station.
55 reinders performance_modelling_of_pv_systems_in_a_virtual_environment
55 reinders performance_modelling_of_pv_systems_in_a_virtual_environmentSandia National Laboratories: Energy & Climate: Renewables
VR4PV is a virtual reality software that enables fast visualization and simulation of photovoltaic (PV) systems. It allows users to render shades on PV systems from surrounding objects or self-shading during the design process. VR4PV has been used for cases involving PV integration in the built environment, designing movable PV boats, shadow analysis of a PV-powered street lamp, and allocating PV and renewable energy technologies on small islands. Future work may involve extending VR4PV's capabilities and transitioning to more performant gaming engines like Unity to improve processing speed while separating animation from energy simulations.Modeling the Irradiance and Temperature Dependence of PV Modules in PVsyst
This document discusses modeling the irradiance and temperature dependence of PV modules in PVsyst software. It presents four modeling approaches: the PVsyst standard model, a "V6 tool" model, an "only G - then T" model, and a "G-T matrix" model. Results show the "only G - then T" and "G-T matrix" models more accurately predict maximum power (Pmax) over varying irradiance (G) and temperature (T) conditions compared to the standard and V6 tool models, with the "G-T matrix" model having the best fit to measurement data overall. Both new models also improve the accuracy of energy yield forecasts for different locations compared to
40 zhang bificial_module_overview
This document discusses bifacial photovoltaic modules and the challenges in modelling their performance and economics. It provides a brief history of bifacial modules and lists current suppliers of different bifacial module technologies. It identifies several key factors that impact the gross margin from bifacial systems, including module yield and capital expenditures, as well as the module design, installation environment, and electrical system architecture. Specific modelling challenges discussed include variables in bifacial flash testing, the impact of albedo from different ground covers, mechanical mounting designs, and electrical considerations like optimal inverter sizing and requirements for multi-input microinverters.
A stand-alone, solar powered commercial bank with EV for public transport
This document proposes a stand-alone solar-powered commercial bank and electric vehicle transport system in Lekki, Lagos, Nigeria. The system is designed to meet the bank's daily energy demand of 288 kWh using 70 kW of solar PV panels and a 400 Ah battery storage system. Simulation results show the system can meet 90-100% of daily demand during dry seasons and 75-90% during wet seasons. An economic analysis estimates a payback period of less than 10 years, making the project economically feasible.
Solar Panel System Design
Solar energy is one of the renewable energies and it is designed for house is an important part of integration of solar panels to a house.
3 1 wittmer_p_vsyst_pvpmc_2016
PVsyst has introduced several new features including the ability to model module degradation over time, simulate battery-based standalone systems using state of charge, and improved 3D modeling capabilities. Upcoming versions will allow modeling of bifacial modules, improved 3D editing tools, support for additional battery technologies, and importing from other CAD formats.
9.2 notes
This document contains notes from a math class on the topic of matrices. It defines a matrix as an arrangement of numbers in rows and columns, with each individual number called an element. The dimensions of a matrix refer to the number of rows and columns. The notes explain that matrices can be added or subtracted if they have the same dimensions, and multiplied if the number of columns in the first matrix equals the number of rows in the second. Homework problems assigned include problems 8 through 24 of page 584, excluding the odd problems, as well as problem 28.
41 corbellini analysis_and_modelling_of_bifacial_pv_modules
41 corbellini analysis_and_modelling_of_bifacial_pv_modulesSandia National Laboratories: Energy & Climate: Renewables
This document summarizes the results of multiple outdoor measurements and modeling of bifacial PV module performance. Outdoor measurements were taken of 12 PV modules in Lugano, Switzerland between 2014-2015. Models were developed and validated to predict cell temperature, irradiation, and power output. The best-fit models estimated bifacial module performance using two parameters for ground-reflected irradiance and could predict power within 4-5 Watts. Further work is needed to improve cell temperature modeling and optimize models for different tilt/azimuth conditions.12 pvpmc
Cell String-Level Energy Production Simulation with Aurora is powerful software used to create over 10k solar projects per week. It provides the most granular submodule-level modeling to capture partial shading, bypass diodes, and cell string-level power electronics in PV systems. The simulation initializes site and panel configurations in 3D space, computes irradiance and temperature for each cell string, and models each string as an electrical circuit to solve for maximum power point at each hour. Results show cell string-level simulation can improve energy production and lifetime energy bill savings accuracy by 1-4% compared to module-level simulation due to its ability to account for unique string configurations, bypass diodes, and cell string optimizers.
Putting quantum to work
This document discusses using quantum mechanics principles to design energy-based products. It describes how work and foil can be used to distribute energy and force differentially. Work exerts an upward force like an hydrofoil on a watercraft, increasing its speed. The foil requirement can distribute the workload according to Euler equations. Mechanical work, like an Archimedes spiral wind turbine, uses both lift and drag forces. Climbing a golden spiral represents iterative work that can create differences. Pencils and dads can also be means to distribute force over time. The overall message is how quantum principles like work and foil can be applied to product design and engineering.
combinepdf (18).pdf
The document provides a single line diagram for Tusuka Processing Ltd. Unit-02. It includes 16 diagrams covering the electrical distribution from the main incoming supply down to individual equipment. Key information shown on the diagrams includes the main incoming feeder from another Tusuka facility, distribution switchgear and busbars, sub-distribution boards, and individual circuit breakers feeding equipment loads. Engineering staff who designed and approved the diagram are also listed.
FYP Structure.pdf
Final Year Project Report on Structural Analysis and Design of Multistorey RCC Building for Earthquake Resistant Design as per IS Codes. - Khwopa College of Engineering - IOE, Tribhuvan university - Civil Engineering Final Report - Bachelor Level Project
Presentation Fatehpur Substation TL Final 22.09.2021.pptx
The document provides information about the 765/400/220kV Fatehpur Substation located in Uttar Pradesh. Key details include:
- The substation has 50 bays total with 13 220kV bays, 26 400kV bays, and 11 765kV bays.
- There are 10 transformers and 20 reactors installed, with a total transformation capacity of 4130MVA.
- The substation is responsible for 1150.12km of transmission lines across 28 lines with 3045 total towers.
- Major ongoing work includes the construction of residential quarters and two new 220kV line bays.
Ais 3 g_2100m_hz_ne_b1 udn11 overshoot analysis
This document summarizes the drive test results and proposed solutions for several sites in the UDN11 cluster. It found overshooting sectors at multiple sites and recommends reducing the E-tilt, P-CPICH power, or adjusting the tilt settings for the affected sectors to address the issues. It also provides the SHO ratio calculation method using Uu_ActiveSet_Count statistics for the UDN11 cluster.
A Report on solar power plant installation
This document summarizes a site visit to a 10kWp solar power plant installed at the National Buildings Construction Corporation Ltd. (NBCC) in New Delhi. The plant uses 60 photovoltaic modules arranged in 20 series strings of 3 parallel combinations each, for a total capacity of 10kWp. Electrical and performance data is provided from the inverter display. Details are given on the solar modules, inverter, mounting structure, installation, and technical specifications of the plant.
NNP Shutdown 2014 Plans - Scurve and npt graph
This document outlines the planned work for the 2014 shutdown of the Ninian North drilling rig and platform. It details over 80 individual work activities across various areas including the derrick, drill floor, BOP deck, and drilling services switchroom. The work is scheduled to take place between September 8 and October 14, 2014 and includes inspections, maintenance, and equipment testing. Several critical path activities are identified, including crown block inspections, BOP maintenance, and drawworks testing. The goal is to complete required workscopes and ensure all drilling equipment is ready when production resumes on October 14.
anti islanding technology(passive)
This document summarizes anti-islanding detection techniques for grid-connected solar photovoltaic systems. It discusses unintentional and intentional islanding, standards for detection within 2 seconds, and detection methods including passive over/under voltage detection. Case studies show voltage and current responses with loads above and below PV power output. While over/under voltage detection fails when load matches output, detection is more likely under voltage as voltage change is greater during islanding. References on IEEE standards, UL standards, and anti-islanding algorithms are provided.
Three phase BLDC motor
Project report on design and fabrication of three phase bldc motor and the control circuit associated with it.
Solar Energy Assessment Report for 100 kWp of Chandigarh, Punjab created by E...
Solar Energy Assessment Report for 100 kWp of Chandigarh, Punjab created by Ezysolare. For more SEAR Reports, Visit http://solardesign.ezysolare.com/
PG Thesis Presentation
This document summarizes a student project to improve productivity in the manufacturing division of a sheet metal company. The objectives are to reduce material movement distance by 20% and increase resource utilization. The current layout and processes are analyzed. A proposed layout is developed with changes like relocating drilling and painting stations. Simulation software is used to compare the current and proposed layouts. The expected results are a reduction in total distance traveled by materials from 207 to 165 feet. The proposed layout is expected to save $500 per month and pay for itself within 10 months.
Projects Department Weekly Report - SVC AlJouf-2, Dynamic and Static Rea... d...
This weekly progress report provides an update on the Dynamic Reactive Power Compensation project at the Hail-2 and Al-Jouf-2 380kV substations in Saudi Arabia. The project involves installing +/-450MVAr Static VAR Compensators (SVCs) to improve voltage support. The report summarizes that commissioning is 99.2% complete at the Al-Jouf-2 site, with energization expected by October 15th. It also provides an overview of the contract details and timelines.
Dana Martin/Daniel Zalkind - 50 MW Segmented Ultralight Morphing Rotor (SUMR)...
Dana Martin/Daniel Zalkind - 50 MW Segmented Ultralight Morphing Rotor (SUMR)...Sandia National Laboratories: Energy & Climate: Renewables
The document describes a segmented ultralight morphing rotor (SUMR) concept for extreme-scale wind turbines between 13-50 MW. The SUMR aims to reduce rotor mass by up to 50% through segmentation and morphing capabilities. This would enable lighter and larger turbines to reduce costs. The project involves design of the morphing hinges, aerodynamic modeling, structural analysis, and development of advanced control strategies to regulate loads and optimize performance under changing wind conditions. Field testing of a 13 MW prototype is planned to validate the SUMR concept.Design of Ku-band power divider using Substrate Integrated Waveguide technique
A Ku-band Substrate Integrated Waveguide power divider is proposed. In this work, the SIW power divider is designed with T-junction configuration. The SIW technique enables the power divider to have low insertion loss, low cost and features uniplanar circuit. An additional of metallic via hole is added in the center of the junction to improve the return loss performance of the Tjunction SIW power divider. The simulated input return losses at port 1 are better than 27 dB, and features equal power division of about -3.1 dB ±0.4 dB at both output ports across frequency range of 13.5-18 GHz. The SIW power divider is fabricated, and the measurement results show acceptable performances. Since there are some losses contributed by the SMA connector of the fabricated SIW power divider prototype, an additional SIW transmission line is simulated and fabricated to analyze the connector loss.
Presentation1.pptx
The document describes a rain sensor circuit that uses an IC 555 timer, transistors, capacitors, resistors, and a rain sensor. The rain sensor works as a switch, allowing current to pass when water is present and discontinuing current flow when dry. The circuit diagram, PCB design, and lab work including drilling and soldering are discussed. Potential applications of the rain sensor include use in automatic windshield wipers, home automation systems, and detecting water levels.
More Related Content
What's hot
A stand-alone, solar powered commercial bank with EV for public transport
This document proposes a stand-alone solar-powered commercial bank and electric vehicle transport system in Lekki, Lagos, Nigeria. The system is designed to meet the bank's daily energy demand of 288 kWh using 70 kW of solar PV panels and a 400 Ah battery storage system. Simulation results show the system can meet 90-100% of daily demand during dry seasons and 75-90% during wet seasons. An economic analysis estimates a payback period of less than 10 years, making the project economically feasible.
Solar Panel System Design
Solar energy is one of the renewable energies and it is designed for house is an important part of integration of solar panels to a house.
3 1 wittmer_p_vsyst_pvpmc_2016
PVsyst has introduced several new features including the ability to model module degradation over time, simulate battery-based standalone systems using state of charge, and improved 3D modeling capabilities. Upcoming versions will allow modeling of bifacial modules, improved 3D editing tools, support for additional battery technologies, and importing from other CAD formats.
9.2 notes
This document contains notes from a math class on the topic of matrices. It defines a matrix as an arrangement of numbers in rows and columns, with each individual number called an element. The dimensions of a matrix refer to the number of rows and columns. The notes explain that matrices can be added or subtracted if they have the same dimensions, and multiplied if the number of columns in the first matrix equals the number of rows in the second. Homework problems assigned include problems 8 through 24 of page 584, excluding the odd problems, as well as problem 28.
41 corbellini analysis_and_modelling_of_bifacial_pv_modules
41 corbellini analysis_and_modelling_of_bifacial_pv_modulesSandia National Laboratories: Energy & Climate: Renewables
This document summarizes the results of multiple outdoor measurements and modeling of bifacial PV module performance. Outdoor measurements were taken of 12 PV modules in Lugano, Switzerland between 2014-2015. Models were developed and validated to predict cell temperature, irradiation, and power output. The best-fit models estimated bifacial module performance using two parameters for ground-reflected irradiance and could predict power within 4-5 Watts. Further work is needed to improve cell temperature modeling and optimize models for different tilt/azimuth conditions.12 pvpmc
Cell String-Level Energy Production Simulation with Aurora is powerful software used to create over 10k solar projects per week. It provides the most granular submodule-level modeling to capture partial shading, bypass diodes, and cell string-level power electronics in PV systems. The simulation initializes site and panel configurations in 3D space, computes irradiance and temperature for each cell string, and models each string as an electrical circuit to solve for maximum power point at each hour. Results show cell string-level simulation can improve energy production and lifetime energy bill savings accuracy by 1-4% compared to module-level simulation due to its ability to account for unique string configurations, bypass diodes, and cell string optimizers.
Putting quantum to work
This document discusses using quantum mechanics principles to design energy-based products. It describes how work and foil can be used to distribute energy and force differentially. Work exerts an upward force like an hydrofoil on a watercraft, increasing its speed. The foil requirement can distribute the workload according to Euler equations. Mechanical work, like an Archimedes spiral wind turbine, uses both lift and drag forces. Climbing a golden spiral represents iterative work that can create differences. Pencils and dads can also be means to distribute force over time. The overall message is how quantum principles like work and foil can be applied to product design and engineering.
What's hot (8)
A stand-alone, solar powered commercial bank with EV for public transport
A stand-alone, solar powered commercial bank with EV for public transport
41 corbellini analysis_and_modelling_of_bifacial_pv_modules
41 corbellini analysis_and_modelling_of_bifacial_pv_modules
Similar to Ujaas Energy - Rooftop PPT AURAIYA
combinepdf (18).pdf
The document provides a single line diagram for Tusuka Processing Ltd. Unit-02. It includes 16 diagrams covering the electrical distribution from the main incoming supply down to individual equipment. Key information shown on the diagrams includes the main incoming feeder from another Tusuka facility, distribution switchgear and busbars, sub-distribution boards, and individual circuit breakers feeding equipment loads. Engineering staff who designed and approved the diagram are also listed.
FYP Structure.pdf
Final Year Project Report on Structural Analysis and Design of Multistorey RCC Building for Earthquake Resistant Design as per IS Codes. - Khwopa College of Engineering - IOE, Tribhuvan university - Civil Engineering Final Report - Bachelor Level Project
Presentation Fatehpur Substation TL Final 22.09.2021.pptx
The document provides information about the 765/400/220kV Fatehpur Substation located in Uttar Pradesh. Key details include:
- The substation has 50 bays total with 13 220kV bays, 26 400kV bays, and 11 765kV bays.
- There are 10 transformers and 20 reactors installed, with a total transformation capacity of 4130MVA.
- The substation is responsible for 1150.12km of transmission lines across 28 lines with 3045 total towers.
- Major ongoing work includes the construction of residential quarters and two new 220kV line bays.
Ais 3 g_2100m_hz_ne_b1 udn11 overshoot analysis
This document summarizes the drive test results and proposed solutions for several sites in the UDN11 cluster. It found overshooting sectors at multiple sites and recommends reducing the E-tilt, P-CPICH power, or adjusting the tilt settings for the affected sectors to address the issues. It also provides the SHO ratio calculation method using Uu_ActiveSet_Count statistics for the UDN11 cluster.
A Report on solar power plant installation
This document summarizes a site visit to a 10kWp solar power plant installed at the National Buildings Construction Corporation Ltd. (NBCC) in New Delhi. The plant uses 60 photovoltaic modules arranged in 20 series strings of 3 parallel combinations each, for a total capacity of 10kWp. Electrical and performance data is provided from the inverter display. Details are given on the solar modules, inverter, mounting structure, installation, and technical specifications of the plant.
NNP Shutdown 2014 Plans - Scurve and npt graph
This document outlines the planned work for the 2014 shutdown of the Ninian North drilling rig and platform. It details over 80 individual work activities across various areas including the derrick, drill floor, BOP deck, and drilling services switchroom. The work is scheduled to take place between September 8 and October 14, 2014 and includes inspections, maintenance, and equipment testing. Several critical path activities are identified, including crown block inspections, BOP maintenance, and drawworks testing. The goal is to complete required workscopes and ensure all drilling equipment is ready when production resumes on October 14.
anti islanding technology(passive)
This document summarizes anti-islanding detection techniques for grid-connected solar photovoltaic systems. It discusses unintentional and intentional islanding, standards for detection within 2 seconds, and detection methods including passive over/under voltage detection. Case studies show voltage and current responses with loads above and below PV power output. While over/under voltage detection fails when load matches output, detection is more likely under voltage as voltage change is greater during islanding. References on IEEE standards, UL standards, and anti-islanding algorithms are provided.
Three phase BLDC motor
Project report on design and fabrication of three phase bldc motor and the control circuit associated with it.
Solar Energy Assessment Report for 100 kWp of Chandigarh, Punjab created by E...
Solar Energy Assessment Report for 100 kWp of Chandigarh, Punjab created by Ezysolare. For more SEAR Reports, Visit http://solardesign.ezysolare.com/
PG Thesis Presentation
This document summarizes a student project to improve productivity in the manufacturing division of a sheet metal company. The objectives are to reduce material movement distance by 20% and increase resource utilization. The current layout and processes are analyzed. A proposed layout is developed with changes like relocating drilling and painting stations. Simulation software is used to compare the current and proposed layouts. The expected results are a reduction in total distance traveled by materials from 207 to 165 feet. The proposed layout is expected to save $500 per month and pay for itself within 10 months.
Projects Department Weekly Report - SVC AlJouf-2, Dynamic and Static Rea... d...
This weekly progress report provides an update on the Dynamic Reactive Power Compensation project at the Hail-2 and Al-Jouf-2 380kV substations in Saudi Arabia. The project involves installing +/-450MVAr Static VAR Compensators (SVCs) to improve voltage support. The report summarizes that commissioning is 99.2% complete at the Al-Jouf-2 site, with energization expected by October 15th. It also provides an overview of the contract details and timelines.
Dana Martin/Daniel Zalkind - 50 MW Segmented Ultralight Morphing Rotor (SUMR)...
Dana Martin/Daniel Zalkind - 50 MW Segmented Ultralight Morphing Rotor (SUMR)...Sandia National Laboratories: Energy & Climate: Renewables
The document describes a segmented ultralight morphing rotor (SUMR) concept for extreme-scale wind turbines between 13-50 MW. The SUMR aims to reduce rotor mass by up to 50% through segmentation and morphing capabilities. This would enable lighter and larger turbines to reduce costs. The project involves design of the morphing hinges, aerodynamic modeling, structural analysis, and development of advanced control strategies to regulate loads and optimize performance under changing wind conditions. Field testing of a 13 MW prototype is planned to validate the SUMR concept.Design of Ku-band power divider using Substrate Integrated Waveguide technique
A Ku-band Substrate Integrated Waveguide power divider is proposed. In this work, the SIW power divider is designed with T-junction configuration. The SIW technique enables the power divider to have low insertion loss, low cost and features uniplanar circuit. An additional of metallic via hole is added in the center of the junction to improve the return loss performance of the Tjunction SIW power divider. The simulated input return losses at port 1 are better than 27 dB, and features equal power division of about -3.1 dB ±0.4 dB at both output ports across frequency range of 13.5-18 GHz. The SIW power divider is fabricated, and the measurement results show acceptable performances. Since there are some losses contributed by the SMA connector of the fabricated SIW power divider prototype, an additional SIW transmission line is simulated and fabricated to analyze the connector loss.
Presentation1.pptx
The document describes a rain sensor circuit that uses an IC 555 timer, transistors, capacitors, resistors, and a rain sensor. The rain sensor works as a switch, allowing current to pass when water is present and discontinuing current flow when dry. The circuit diagram, PCB design, and lab work including drilling and soldering are discussed. Potential applications of the rain sensor include use in automatic windshield wipers, home automation systems, and detecting water levels.
CE Confr Presentation 08 Oct 2022.pptx
This document provides an introduction and progress update for runway works being conducted at Air Force Station Bagdogra. Some key details include:
- The project started in January 2019 with a target completion date of January 2023 after extensions. Physical progress is currently at 80% as of October 2022.
- The scope of work involves construction and improvements to the main runway, parallel taxi track, links, dispersal areas, drains, and other infrastructure.
- Monthly targets are outlined to complete the remaining work by the January 2023 deadline, focusing on tasks like paving, drainage installation, and finishing works.
- Challenges mentioned are non-availability of aggregates, inadequate drainage work, and needing
Optical Yagi-Uda Nanoantenna
Kartik Goyal presented his dissertation on the design and optimization of optical Yagi-Uda nantennas for beam steering applications. He discussed the need for optical nantennas in applications such as communication, photovoltaics, and medical imaging. Through his research, he analyzed different nantenna designs, materials, and substrates. His final optimized design was a 9-element circular loop optical Yagi-Uda nantenna made of gold with a gallium arsenide substrate that achieved high directivity for beam steering.
EFYP2 Presentation
This document summarizes a research project on optimizing a regional network pump station through the use of glass reinforced plastics (GRP) materials. The research aims to plan and design the low and medium voltage electrical systems for a pump station serving 650,000 people. It also calculates reductions in total head and power consumption by applying the Hazen-Williams equation and analyzing replacing ductile iron pipes with GRP. The results show potential energy cost savings of over RM500,000 per year and a simple payback period of 10 years by using GRP instead of ductile iron. The research also developed optimized switchgear designs for the electrical services.
1 145-143444129513-18
This document describes the design calculations and cost estimates for a 30 kW parabolic trough solar thermal electrification system for a model village in Myanmar. Key details include:
- The system would use 194 m2 of parabolic trough collectors to generate the required 30 kW of power.
- Calculations were done to determine the absorbed solar flux, useful heat gain, and exit temperature of the working fluid (molten salt) for the system in April and December.
- 9 collectors would be connected in series and 11 in parallel to meet the 30 kW capacity.
- Daily load consumption for the village was calculated to be 28 kW, with separate supply for day (14.7 kWh)
Convergent Wind Mill with Velocity and Acceleration Control
This document describes the design of a convergent wind mill that uses convergent nozzles to control air velocity and generate electricity. The wind mill aims to more efficiently utilize wind power and reduce costs compared to existing methods. It consists of horizontally rotating blades connected to a generator. Convergent nozzles placed in four directions control incoming air velocity before it reaches the blades. Experimental testing showed the design was able to generate voltages from 0.04 to 0.12 volts over the course of a day. The convergent wind mill aims to help reduce electricity shortage and reliance on fossil fuels.
The poster
poster on doubling project.. insights , result and discussion along with well maintained clear formatting
Similar to Ujaas Energy - Rooftop PPT AURAIYA (20)
Presentation Fatehpur Substation TL Final 22.09.2021.pptx
Presentation Fatehpur Substation TL Final 22.09.2021.pptx
Solar Energy Assessment Report for 100 kWp of Chandigarh, Punjab created by E...
Solar Energy Assessment Report for 100 kWp of Chandigarh, Punjab created by E...
Projects Department Weekly Report - SVC AlJouf-2, Dynamic and Static Rea... d...
Projects Department Weekly Report - SVC AlJouf-2, Dynamic and Static Rea... d...
Dana Martin/Daniel Zalkind - 50 MW Segmented Ultralight Morphing Rotor (SUMR)...
Dana Martin/Daniel Zalkind - 50 MW Segmented Ultralight Morphing Rotor (SUMR)...
Design of Ku-band power divider using Substrate Integrated Waveguide technique
Design of Ku-band power divider using Substrate Integrated Waveguide technique
Convergent Wind Mill with Velocity and Acceleration Control
Convergent Wind Mill with Velocity and Acceleration Control
Ujaas Energy - Rooftop PPT AURAIYA
- 1. OWN YOUR SUN Swapnil Kotwal | Design Engineer | Ujaas Energy Limited
- 2. A Presentation on NTPC AURAIYA 30 x 2 kW Rooftop Solar PV Projects Allocated by NTPC
- 3. PROJECT DETAIL NTPC (Auraiya) ( 30 x 2 KW ) PROJECT NOMENCLATURE S.No Description Values 1 LATITUDE & LONGITUDE 26.8242˚ N, & 75.8122˚ E 2 PLANT DC CAPACITY 62.10kWp 3 PLANT AC CAPACITY 60kW 4 MODULE TECHNOLOGY USED MULTI-CRYSTALLINE 5 MODULE WATT PEAK USED 345Wp 6 MODULE QUANTITY 180 No's 7 TOTAL NO. OF STRINGS 10 8 INVERTER CAPACITY USED 60Wp 9 INVERTER QUANTITY 2 10 MODULE TILT 26º 11 AZIMUTH NO 12 PITCH DISTANCE 6 Mtrs 13 DISTANCE BETWEEN ROWS 3 Mtrs 14 MMS MATRIX 3 x 1 (Row x Column) 15 MMS ORIENTATION LANDSCAPE 16 NO.OF MODULES IN 1 STRING 18 17 MODULE DIMENSIONS 1.960m x 0.990m 18 INVERTER DIMENSIONS (W/H/D) (625 x 612x 278 )mm 19 INVERTER WEIGHT 50kg/ INV.
- 4. NTPC AURAIYA CENTRAL SCHOOL
- 5. NTPC AURAIYA CENTRAL SCHOOL MARKING
- 6. NTPC AURIYA SJS SCHOOL
- 7. NTPC AURIYA SJS SCHOOL
- 8. Activity Updates NTPC AURAIYA 30kW x 2 PROJECT NTPC AURIYA CENTRAL SCHOOL S.No DWG No Name 1 UEL-2016-NTPC -(Auraiya)-CEN-DWG-001 Single Line Diagram 2 UEL-2016-NTPC -(Auraiya)-CEN-DWG-002 PV Plant Roof Layout 3 UEL-2016-NTPC -(Auraiya)-CEN-DWG-003 PV Plant String Plan 4 UEL-2016-NTPC -(Auraiya)-CEN-DWG-005 PV Plant Earthing Detail Layout NTPC AURIYA ST. JOSEPH SCHOOL S.No DWG No Name 1 UEL-2016-NTPC -(Auraiya)- SJS -DWG-001 Single Line Diagram 2 UEL-2016-NTPC -(Auraiya)- SJS -DWG-002 PV Plant Roof Layout 3 UEL-2016-NTPC -(Auraiya)- SJS -DWG-003 PV Plant String Plan 4 UEL-2016-NTPC -(Auraiya)- SJS -DWG-005 PV Plant Earthing Detail Layout NTPC AURIYA CIVIL STRUCTURE S.No DWG No Name 1 UEL-2016-NTPC -(Auraiya)- CVL -DWG-001 STRUCTURE DRAWING
- 18. SHADOW ANALIYSIS 21 JUNE MORNING
- 19. SHADOW ANALIYSIS 21 JUNE EVENING
- 20. SHADOW ANALIYSIS 21 DEC MORNING
- 21. SHADOW ANALIYSIS 21 DEC EVENING
- 22. ENERGY ESTIMATION Month Global Irradiation on inclined plane (Glnc) KWh/Sqm/day Days in the month Irradiation on Inclined Plane (GInc) KWh/Sqm/mont h Energy Production without Loses into consideration (KWh) Energy Production with Losses into consideration (KWh) January 3.62 31 112.22 6,968.86 5,226.65 February 4.63 28 129.64 8,050.64 6,037.98 March 5.68 31 176.08 10,934.57 8,200.93 April 6.19 30 185.7 11,531.97 8,648.98 May 6.5 31 201.5 12,513.15 9,384.86 June 5.88 30 176.4 10,954.44 8,215.83 July 4.78 31 148.18 9,201.98 6,901.48 August 4.45 31 137.95 8,566.70 6,425.02 September 4.45 30 133.5 8,290.35 6,217.76 October 4.83 31 149.73 9,298.23 6,973.67 November 4.14 30 124.2 7,712.82 5,784.62 December 3.25 31 100.75 6,256.58 4,692.43 Total (For 1 Year) 58.4 365.0 1775.9 110,280.29 82,710.21
- 23. ENERGY CHART 0.00 1,000.00 2,000.00 3,000.00 4,000.00 5,000.00 6,000.00 7,000.00 8,000.00 9,000.00 10,000.00 Chart Title Energy Production with Losses into consideration (KWh)
- 24. Project Schedule
- 25. Thanks and Open for Questions
Editor's Notes
- May require more than one slide