PUTTING QUANTUM TO WORK
Potential in Design and Delivery of the Ark Product
Jean A. Marshall, Brij Consulting, LLC
The difference between work and foil
• The Archimedes Screw was a mechanical
device invented by the Greeks as a
predicable means of exerting force
• Foil on the other hand is a mechanic of
force that redistributes energy
• The difference between Work and Foil is
important in Quantum in terms of Power
distribution and Intelligent Applications
• Our Model of the Ark Design in Quantum
Based Systems employs both due to the
potential within the design of energy based
products
A Foil increases speed
by distributing force
• As a hydrofoil-equipped
watercraft increases in speed,
the hydrofoil elements below
the hull(s) ... following the
Euler equations, exerts an
upward force on the foil.
Foil Mechanics deploy the differential
• The Foil requirement distributes the work load of 28420 (71.05
progression) – 71.208 =-.142 cube dynamic/.002 = 71 or another
way to view it is to take 71.05/71.208 = .9977 Theta conversion
Theta 996/3 distributes the work product
Mechanical Work of
golden spiral
Unlike traditional Horizontal Axis Wind
Turbines (HAWTs), which use the lift force
to take power from wind energy, the
Archimedes spiral wind turbine uses
both the lift and drag force for the same.
Climbing the Spiral is Work
In this small exercise we climbed the golden spiral to work with a cube
pushing from the field gaining an iterative ark rate and speed to arrive
at Z (post.) This is an assembler activity of time and motion.
Work itself can create a difference of 1
Pencils are another means to
distribute force
1930+68.6=1998.6 work
68.6-58.1=10.5 foil
1988.1 spiral at post
Euler equation
Just Add Work
150.74+1.112
1.1115-1.112
.001354
Don’t give up on Dad just yet…
Father’s may know best when it comes to
good work, value and saving for the future.
From our 1963 economy to 2018 and
beyond, the same tradition holds true…
PAINT THE HOUSE GREEN
This is Green Engineering

Putting quantum to work

  • 1.
    PUTTING QUANTUM TOWORK Potential in Design and Delivery of the Ark Product Jean A. Marshall, Brij Consulting, LLC
  • 2.
    The difference betweenwork and foil • The Archimedes Screw was a mechanical device invented by the Greeks as a predicable means of exerting force • Foil on the other hand is a mechanic of force that redistributes energy • The difference between Work and Foil is important in Quantum in terms of Power distribution and Intelligent Applications • Our Model of the Ark Design in Quantum Based Systems employs both due to the potential within the design of energy based products
  • 3.
    A Foil increasesspeed by distributing force • As a hydrofoil-equipped watercraft increases in speed, the hydrofoil elements below the hull(s) ... following the Euler equations, exerts an upward force on the foil.
  • 4.
    Foil Mechanics deploythe differential • The Foil requirement distributes the work load of 28420 (71.05 progression) – 71.208 =-.142 cube dynamic/.002 = 71 or another way to view it is to take 71.05/71.208 = .9977 Theta conversion Theta 996/3 distributes the work product
  • 5.
    Mechanical Work of goldenspiral Unlike traditional Horizontal Axis Wind Turbines (HAWTs), which use the lift force to take power from wind energy, the Archimedes spiral wind turbine uses both the lift and drag force for the same.
  • 6.
    Climbing the Spiralis Work In this small exercise we climbed the golden spiral to work with a cube pushing from the field gaining an iterative ark rate and speed to arrive at Z (post.) This is an assembler activity of time and motion. Work itself can create a difference of 1
  • 7.
    Pencils are anothermeans to distribute force 1930+68.6=1998.6 work 68.6-58.1=10.5 foil 1988.1 spiral at post Euler equation
  • 8.
  • 9.
    Don’t give upon Dad just yet… Father’s may know best when it comes to good work, value and saving for the future. From our 1963 economy to 2018 and beyond, the same tradition holds true…
  • 10.
    PAINT THE HOUSEGREEN This is Green Engineering