This document discusses different types of data and variables that are used in statistical analysis. It describes three main types of data: qualitative data which uses words, letters or codes to represent categories; ranked data which uses numbers to represent relative standing; and quantitative data which uses numbers to represent amounts or counts. Variables can be independent, dependent, discrete, continuous or confounding. The document also provides guidelines for describing data using tables, graphs, frequencies, relative frequencies and percentiles.
types of variables in research, Dependent independent, moderator,quantitative qualitative,continuous discontinuous,demographic,extraneous, confounding,intervening, control
types of variables in research, Dependent independent, moderator,quantitative qualitative,continuous discontinuous,demographic,extraneous, confounding,intervening, control
An Approach to Detecting Writing Styles Based on Clustering Techniquesambekarshweta25
An Approach to Detecting Writing Styles Based on Clustering Techniques
Authors:
-Devkinandan Jagtap
-Shweta Ambekar
-Harshit Singh
-Nakul Sharma (Assistant Professor)
Institution:
VIIT Pune, India
Abstract:
This paper proposes a system to differentiate between human-generated and AI-generated texts using stylometric analysis. The system analyzes text files and classifies writing styles by employing various clustering algorithms, such as k-means, k-means++, hierarchical, and DBSCAN. The effectiveness of these algorithms is measured using silhouette scores. The system successfully identifies distinct writing styles within documents, demonstrating its potential for plagiarism detection.
Introduction:
Stylometry, the study of linguistic and structural features in texts, is used for tasks like plagiarism detection, genre separation, and author verification. This paper leverages stylometric analysis to identify different writing styles and improve plagiarism detection methods.
Methodology:
The system includes data collection, preprocessing, feature extraction, dimensional reduction, machine learning models for clustering, and performance comparison using silhouette scores. Feature extraction focuses on lexical features, vocabulary richness, and readability scores. The study uses a small dataset of texts from various authors and employs algorithms like k-means, k-means++, hierarchical clustering, and DBSCAN for clustering.
Results:
Experiments show that the system effectively identifies writing styles, with silhouette scores indicating reasonable to strong clustering when k=2. As the number of clusters increases, the silhouette scores decrease, indicating a drop in accuracy. K-means and k-means++ perform similarly, while hierarchical clustering is less optimized.
Conclusion and Future Work:
The system works well for distinguishing writing styles with two clusters but becomes less accurate as the number of clusters increases. Future research could focus on adding more parameters and optimizing the methodology to improve accuracy with higher cluster values. This system can enhance existing plagiarism detection tools, especially in academic settings.
Hierarchical Digital Twin of a Naval Power SystemKerry Sado
A hierarchical digital twin of a Naval DC power system has been developed and experimentally verified. Similar to other state-of-the-art digital twins, this technology creates a digital replica of the physical system executed in real-time or faster, which can modify hardware controls. However, its advantage stems from distributing computational efforts by utilizing a hierarchical structure composed of lower-level digital twin blocks and a higher-level system digital twin. Each digital twin block is associated with a physical subsystem of the hardware and communicates with a singular system digital twin, which creates a system-level response. By extracting information from each level of the hierarchy, power system controls of the hardware were reconfigured autonomously. This hierarchical digital twin development offers several advantages over other digital twins, particularly in the field of naval power systems. The hierarchical structure allows for greater computational efficiency and scalability while the ability to autonomously reconfigure hardware controls offers increased flexibility and responsiveness. The hierarchical decomposition and models utilized were well aligned with the physical twin, as indicated by the maximum deviations between the developed digital twin hierarchy and the hardware.
Sachpazis:Terzaghi Bearing Capacity Estimation in simple terms with Calculati...Dr.Costas Sachpazis
Terzaghi's soil bearing capacity theory, developed by Karl Terzaghi, is a fundamental principle in geotechnical engineering used to determine the bearing capacity of shallow foundations. This theory provides a method to calculate the ultimate bearing capacity of soil, which is the maximum load per unit area that the soil can support without undergoing shear failure. The Calculation HTML Code included.
Harnessing WebAssembly for Real-time Stateless Streaming PipelinesChristina Lin
Traditionally, dealing with real-time data pipelines has involved significant overhead, even for straightforward tasks like data transformation or masking. However, in this talk, we’ll venture into the dynamic realm of WebAssembly (WASM) and discover how it can revolutionize the creation of stateless streaming pipelines within a Kafka (Redpanda) broker. These pipelines are adept at managing low-latency, high-data-volume scenarios.
6th International Conference on Machine Learning & Applications (CMLA 2024)ClaraZara1
6th International Conference on Machine Learning & Applications (CMLA 2024) will provide an excellent international forum for sharing knowledge and results in theory, methodology and applications of on Machine Learning & Applications.
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressionsVictor Morales
K8sGPT is a tool that analyzes and diagnoses Kubernetes clusters. This presentation was used to share the requirements and dependencies to deploy K8sGPT in a local environment.
Saudi Arabia stands as a titan in the global energy landscape, renowned for its abundant oil and gas resources. It's the largest exporter of petroleum and holds some of the world's most significant reserves. Let's delve into the top 10 oil and gas projects shaping Saudi Arabia's energy future in 2024.
Welcome to WIPAC Monthly the magazine brought to you by the LinkedIn Group Water Industry Process Automation & Control.
In this month's edition, along with this month's industry news to celebrate the 13 years since the group was created we have articles including
A case study of the used of Advanced Process Control at the Wastewater Treatment works at Lleida in Spain
A look back on an article on smart wastewater networks in order to see how the industry has measured up in the interim around the adoption of Digital Transformation in the Water Industry.
Water billing management system project report.pdfKamal Acharya
Our project entitled “Water Billing Management System” aims is to generate Water bill with all the charges and penalty. Manual system that is employed is extremely laborious and quite inadequate. It only makes the process more difficult and hard.
The aim of our project is to develop a system that is meant to partially computerize the work performed in the Water Board like generating monthly Water bill, record of consuming unit of water, store record of the customer and previous unpaid record.
We used HTML/PHP as front end and MYSQL as back end for developing our project. HTML is primarily a visual design environment. We can create a android application by designing the form and that make up the user interface. Adding android application code to the form and the objects such as buttons and text boxes on them and adding any required support code in additional modular.
MySQL is free open source database that facilitates the effective management of the databases by connecting them to the software. It is a stable ,reliable and the powerful solution with the advanced features and advantages which are as follows: Data Security.MySQL is free open source database that facilitates the effective management of the databases by connecting them to the software.
2. Introduction
• Any statistical analysis is performed on data, a
collection of actual observations or scores in a
survey or an experiment.
• The precise form of a statistical analysis often
depends on whether data are qualitative,
ranked, or quantitative.
3. THREE TYPES OF DATA
• Qualitative data consist of words (Yes or No), letters (Y
or N), or numerical codes (0 or 1) that represent a
class or category.
• Ranked data consist of numbers (1st, 2nd, . . . 40th
place) that represent relative standing within a group.
• Quantitative data consist of numbers (weights of 238,
170, . . . 185 lbs) that represent an amount or a count.
To determine the type of data, focus on a single
observation in any collection of observations.
4. TYPES OF VARIABLES
• A variable is a characteristic or property that can
take on different values.
The weights can be described not only as quantitative
data but also as observations for a quantitative
variable, since the various weights take on different
numerical values.
By the same token, the replies can be described as
observations for a qualitative variable, since the replies
to the Facebook profile question take on different
values of either Yes or No.
Given this perspective, any single observation can be
described as a constant, since it takes on only one
value.
5. Contd.,
• A discrete variable consists of isolated numbers separated by
gaps.
• Discrete variables can only assume specific values that you
cannot subdivide. Typically, you count discrete values, and the
results are integers.
• Examples
Counts- such as the number of children in a family. (1, 2, 3,
etc., but never 1.5)
These variables cannot have fractional or decimal values.
You can have 20 or 21 cats, but not 20.5
The number of heads in a sequence of coin tosses.
The result of rolling a die.
The number of patients in a hospital.
The population of a country.
6. Contd.,
• While discrete variables have no decimal
places, the average of these values can be
fractional.
• For example, families can have only a discrete
number of children: 1, 2, 3, etc. However, the
average number of children per family can be
2.2.
7. Contd.,
• A continuous variable consists of numbers
whose values, at least in theory, have no
restrictions.
• Continuous variables can assume any numeric
value and can be meaningfully split into
smaller parts. Consequently, they have valid
fractional and decimal values.
8. Contd.,
• In fact, continuous variables have an infinite number
of potential values between any two points.
Generally, you measure them using a scale.
Examples of continuous variables include weight,
height, length, time, and temperature.
• Durations, such as the reaction times of grade school
children to a fire alarm; and standardized test scores,
such as those on the Scholastic Aptitude Test (SAT).
9. Contd.,
• Independent Variable
• In an experiment, an independent variable is
the treatment manipulated by the investigator.
– Independent variables (IVs) are the ones that you
include in the model to explain or predict changes in
the dependent variable.
– Independent indicates that they stand alone and
other variables in the model do not influence them.
10. Contd.,
– Independent variables are also known as
predictors, factors, treatment variables,
explanatory variables, input variables, x-variables,
and right-hand variables—because they appear on
the right side of the equals sign in a regression
equation.
– It is a variable that stands alone and isn't changed
by the other variables you are trying to measure.
11. Contd.,
• For example, someone's age might
be an independent variable. Other
factors (such as what they eat, how
much they go to school, how much
television they watch)
12. Contd.,
Dependent Variable
• When a variable is believed to have been
influenced by the independent variable, it is
called a dependent variable. In an
experimental setting, the dependent variable
is measured, counted, or recorded by the
investigator.
– The dependent variable (DV) is what you want to use
the model to explain or predict. The values of this
variable depend on other variables.
– It’s also known as the response variable, outcome
variable, and left-hand variable. Graphs place
dependent variables on the vertical, or Y, axis.
– a dependent variable is exactly what it sounds like. It is
something that depends on other factors.
13. Contd.,
• For example the blood sugar test depends on
what food you ate, at which time you ate etc.
• Unlike the independent variable, the
dependent variable isn’t manipulated by the
investigator.
• Instead, it represents an outcome: the data
produced by the experiment.
14. Confounding Variable
• An uncontrolled variable that compromises
the interpretation of a study is known as a
confounding variable.
• Sometimes a confounding variable occurs
because it’s impossible to assign subjects
randomly to different conditions.
17. Describing Data with Tables and Graphs
• Frequency Distributions for Quantitative Data
• A frequency distribution is a collection of
observations produced by sorting observations into
classes and showing their frequency (f) of occurrence
in each class.
• When observations are sorted into classes of single
values, as in Table 2.1, the result is referred to as a
frequency distribution for ungrouped data.
• Frequency distribution table is much more informative if
possible observed values is less than 20. If more entry is
observed then grouped data is used.
18.
19. Grouped Data
• According to their frequency of occurrence.
When observations are sorted into classes of
more than one value result is referred to as a
frequency for grouped data.
• The general structure of this frequency
distribution is the data’s are grouped into class
intervals with 10 possible values each.
• The frequency (f) column shows the frequency
of observations in each class and, at the
bottom, the total number of observations in all
classes.
23. Outliers
• An outlier is an extremely high or extremely low
data point relative to the nearest data point and
the rest of the neighboring co-existing values in a
data graph or dataset you're working with.
• Outliers are extreme values that stand out greatly
from the overall pattern of values in a dataset or
graph.
24. Relative Frequency Distributions
• Relative frequency distributions show the
frequency of each class as a part or fraction of
the total frequency for the entire distribution.
• This type of distribution is especially helpful
when you must compare two or more
distributions based on different total numbers
of observations.
• The conversion to relative frequencies allows a
direct comparison of the shapes of two
distributions without adjust other observations.
25.
26. Constructing Relative Frequency
Distributions
• To convert a frequency distribution into a
relative frequency distribution, divide the
frequency for each class by the total frequency
for the entire distribution.
• Table 2.5 illustrates a relative frequency
distribution based on the weight distribution of
Table 2.2.
27. Percentages or Proportions
• A proportion always varies between 0
and 1, whereas a percentage always
varies between 0 percent and 100
percent.
• To convert the relative frequencies,
multiply each proportion by 100; that is,
move the decimal point two places to the
right.
28. Cumulative Frequency Distributions
• Cumulative frequency distributions show the
total number of observations in each class and
in all lower- ranked classes.
• Cumulative frequencies are usually converted,
in turn, to cumulative percentages. Cumulative
percentages are often referred to as percentile
ranks.
29. Constructing Cumulative Frequency
Distributions
• To convert a frequency distribution into a
cumulative frequency distribution, add to
the frequency of each class the sum of
the frequencies of all classes ranked
below it.
31. Cumulative Percentages
• As has been suggested, if relative standing
within a distribution is particularly important,
then cumulative frequencies are converted to
cumulative percentages.
• To obtain this cumulative percentage, the
cumulative frequency of the class should be
divided by the total frequency of the entire
distribution.
33. Percentile Ranks
• When used to describe the relative position of
any score within its parent distribution,
cumulative percentages are referred to as
percentile ranks.
• The percentile rank of a score indicates the
percentage of scores in the entire distribution
with similar or smaller values than that score.
Thus a weight has a percentile rank of 80 if
equal or lighter weights constitute 80 percent
of the entire distribution.
34. Frequency Distributions For Qualitative (Nominal) Data
• Frequency distributions for qualitative data are easy to
construct. Simply determine the frequency with which
observations occupy. Each class, and report these frequencies as
shown in Table 2.7 for the Face book profile survey.
• Qualitative data have an ordinal level of measurement because
Observations can be ordered from least to most, that order
should be preserved in the frequency table.
35. Relative and Cumulative Distributions for
Qualitative Data
• Frequency distributions for qualitative
variables can always be converted into
relative frequency distributions.
• if measurement is ordinal because
observations can be ordered from least to
most, cumulative frequencies (and
cumulative percentages) can be used.