A new pipe was manufactured from the same alloy and subjected to NDT prior to installation. This showed that the pipe contained a similarly orientated flaw, 1.5 mm deep, but with a semicircular shape. Assuming normal operating conditions, i.e. no pressure surges and a daily evacuation to zero pressure, will the pipe last for its desired lifetime of 30 years? Assume that the geometry correction factor has a constant value of 0.7 in this second part of the question and note that a fatigue crack growth rate of 6.25x10-8 mm/cycle corresponds to an applied delta K value of 10 MPa m½. The Paris law exponent m is 4.