Maleta cyclic distillation is manufacturer of tray dividing-wall columns . The tray dividing-wall columns have opportunity to combine the required number of columns for the separation of multicomponent mixtures in a one column and have advantages over common Parked Columns.

1. Tray Dividing-Wall Columns
1
Cyclic DistillationTechnology

2. Advantages of Tray Dividing-Wall Columns
• The price of tray dividing-wall columns is much lower than
common DWC-columns (packing columns)
• Mass transfer efficiency by cyclic distillation
• Reduction of the residence time of liquid in the column
• The uniform arrangement of liquid on the tray
• The separation efficiency doesn’t depend on the column
diameter
• Any geometric configuration of the trays
• Placement packing between trays
• Better process control
• Simpler column design
• Faster and simpler installation/revamping
2© 2014 www.maletacd.com

3. 3© 2014 www.maletacd.com
Design of MaletaTrays
Dividing-Wall
Installed ½ Part of Column
Tray Dividing-Wall Columns

4. 4
Tray Dividing-Wall Column DN 1500/1700
© 2014 www.maletacd.com
Industry Application of Tray Dividing-Wall Columns

5. 5© 2014 www.maletacd.com
Reactive –TDWC Extractive -DWCAzeotropic -DWCDWC
The configurations of the tray dividing-wall columns for four-component mixtures:
Field application of theTray Dividing-Wall Columns

6. Economic Benefits
• Lower investment cost
• Lower hot energy consumption (high mass transfer efficiency
and reduction of reflux rate)
• Lower electricity energy consumption (reduction column
height and reflux rate)
• Improvement of product quality
• Increase of product yield
6© 2014 www.maletacd.com

7. 7
Maleta cyclic distillation Limited Liability Company
Pärnumnt 130-38, 11317Tallinn, Estonia
Website: www.maletacd.com
Mobile: +38 050 178 55 50
E-mail: info@maletacd.com
Skype: bogdan_maleta
Contact Information: