The document provides information on the Training Regulations for PC Operations NC II. It outlines the qualifications required to achieve the PC Operations NC II competency which includes basic, common, and core competencies. The basic competencies cover workplace communication, teamwork, career professionalism, and occupational health and safety. The common competencies involve applying quality standards and operating a personal computer. The core competencies focus on using various software like word processing, spreadsheets, presentations, and email/web browsers. The training standards, assessment arrangements, and definitions are also presented.
This document provides a module plan for teaching the competency of installing and configuring computer systems. It outlines 5 learning outcomes including assembling computer hardware, preparing installers, installing operating systems and device drivers, installing application software, and conducting testing and documentation. For each outcome, it describes the learning activities, assessment plans, and the teacher's self-reflection. It also includes an introduction to the module, the learning outcomes, sample session plans, and module content details.
This document outlines a lesson plan for a course on computer hardware servicing. It includes 4 lessons that cover: 1) use of hand tools, 2) performing mensuration and calculation, 3) preparing and interpreting technical drawings, and 4) practicing occupational health and safety procedures. Each lesson has learning competencies, projects/activities and assessment methods. The goal is for students to gain skills in using tools, measurement, interpreting drawings and ensuring workplace safety while servicing computer hardware.
This document outlines a competency-based curriculum for the qualification of Computer Systems Servicing NC II. It includes the course design, structure, resources needed, assessment methods for basic, common and core competencies. The basic competencies cover obtaining and conveying workplace information, participating in meetings, and teamwork. Common competencies include quality control, using computers and tools, making measurements, and testing electronics components. The core competencies focus on assembling, installing, configuring and maintaining computer hardware and networks, diagnosing and rectifying faults. The course is designed to develop the knowledge, skills and attitudes of computer service technicians according to industry standards over 280 hours of training.
This document defines common computer hardware and storage terms like bit, byte, booting, electronic storage, interfaces, laser, magnetic platters, memory modules, magnetic storage media, optical storage media, hard disk drives, integrated drive electronics, and file size and binary. It provides examples of converting between decimal and binary numbers. It also gives practice problems for calculating storage capacity and how many files can be stored.
The document provides an overview of the curriculum for an introductory course on computer hardware servicing for Grade 7/8 students. The course covers key competencies including the use of tools, maintaining tools and equipment, performing measurements and calculations, interpreting technical drawings, and practicing occupational health and safety procedures. It aims to introduce students to basic concepts in the field and potential career opportunities. The curriculum is structured into 7 lessons that address topics like personal entrepreneurial competencies, understanding the environment and market, using and maintaining tools and equipment, and following safety protocols.
The document provides learning materials for installing and configuring computer systems, including:
1) Assembling computer hardware according to safety procedures and checking components.
2) Installing operating systems and device drivers following manufacturer instructions.
3) Testing installations to ensure proper function and conformance to requirements, documenting results.
The document provides information on the K to 12 Basic Education Curriculum for the Junior High School Technology and Livelihood Track and Senior High School Technical-Vocational Livelihood Track. It outlines 24 specializations in Agri-Fishery Arts, 25 in Home Economics, 26 in Industrial Arts, and 12 in Information and Communications Technology. For each specialization, it lists the number of hours required and any prerequisite specializations. It then provides a sample curriculum for the Computer Systems Servicing specialization, outlining learning competencies, content standards, and performance standards across topics such as personal entrepreneurial competencies, environment and market analysis, and product development.
This learning outcome covers determining learner's training requirements. Trainees' current competencies are assessed and compared to the competencies outlined in curriculum documents and standards to identify any gaps. A data gathering tool is also developed to collect information on trainees' characteristics to help plan training. Determining requirements includes validating needs with relevant stakeholders and documenting the results.
This document provides a module plan for teaching the competency of installing and configuring computer systems. It outlines 5 learning outcomes including assembling computer hardware, preparing installers, installing operating systems and device drivers, installing application software, and conducting testing and documentation. For each outcome, it describes the learning activities, assessment plans, and the teacher's self-reflection. It also includes an introduction to the module, the learning outcomes, sample session plans, and module content details.
This document outlines a lesson plan for a course on computer hardware servicing. It includes 4 lessons that cover: 1) use of hand tools, 2) performing mensuration and calculation, 3) preparing and interpreting technical drawings, and 4) practicing occupational health and safety procedures. Each lesson has learning competencies, projects/activities and assessment methods. The goal is for students to gain skills in using tools, measurement, interpreting drawings and ensuring workplace safety while servicing computer hardware.
This document outlines a competency-based curriculum for the qualification of Computer Systems Servicing NC II. It includes the course design, structure, resources needed, assessment methods for basic, common and core competencies. The basic competencies cover obtaining and conveying workplace information, participating in meetings, and teamwork. Common competencies include quality control, using computers and tools, making measurements, and testing electronics components. The core competencies focus on assembling, installing, configuring and maintaining computer hardware and networks, diagnosing and rectifying faults. The course is designed to develop the knowledge, skills and attitudes of computer service technicians according to industry standards over 280 hours of training.
This document defines common computer hardware and storage terms like bit, byte, booting, electronic storage, interfaces, laser, magnetic platters, memory modules, magnetic storage media, optical storage media, hard disk drives, integrated drive electronics, and file size and binary. It provides examples of converting between decimal and binary numbers. It also gives practice problems for calculating storage capacity and how many files can be stored.
The document provides an overview of the curriculum for an introductory course on computer hardware servicing for Grade 7/8 students. The course covers key competencies including the use of tools, maintaining tools and equipment, performing measurements and calculations, interpreting technical drawings, and practicing occupational health and safety procedures. It aims to introduce students to basic concepts in the field and potential career opportunities. The curriculum is structured into 7 lessons that address topics like personal entrepreneurial competencies, understanding the environment and market, using and maintaining tools and equipment, and following safety protocols.
The document provides learning materials for installing and configuring computer systems, including:
1) Assembling computer hardware according to safety procedures and checking components.
2) Installing operating systems and device drivers following manufacturer instructions.
3) Testing installations to ensure proper function and conformance to requirements, documenting results.
The document provides information on the K to 12 Basic Education Curriculum for the Junior High School Technology and Livelihood Track and Senior High School Technical-Vocational Livelihood Track. It outlines 24 specializations in Agri-Fishery Arts, 25 in Home Economics, 26 in Industrial Arts, and 12 in Information and Communications Technology. For each specialization, it lists the number of hours required and any prerequisite specializations. It then provides a sample curriculum for the Computer Systems Servicing specialization, outlining learning competencies, content standards, and performance standards across topics such as personal entrepreneurial competencies, environment and market analysis, and product development.
This learning outcome covers determining learner's training requirements. Trainees' current competencies are assessed and compared to the competencies outlined in curriculum documents and standards to identify any gaps. A data gathering tool is also developed to collect information on trainees' characteristics to help plan training. Determining requirements includes validating needs with relevant stakeholders and documenting the results.
This document identifies tools and equipment used in computer systems and networks. It presents three statements about pliers, a soldering gun, and screws as part of a "Fact or Bluff" game to determine their uses and functions. The document aims to help students learn the different tools and equipment used in computer systems and identify their various uses and functions. References for further information are also provided.
This document outlines a competency-based curriculum for a Computer Hardware Servicing NC II qualification. It includes 392 hours of training delivered through modules covering basic, common, and core competencies. Basic competencies focus on workplace communication, teamwork, professionalism, and safety. Common competencies include quality standards, computer operation, measurement, technical drawing, hand tools, and electrical wiring. Core competencies center on installing, diagnosing, configuring, and maintaining computer systems and networks. Assessment involves hands-on demonstration, observation, exams, and discussion. The course uses lecture, self-paced learning, and group work delivered by a qualified trainer.
This document contains an answer sheet for a student named Section in the Damilag Integrated School for their TLE 10 ICT - Computer System Servicing class. The answer sheet includes responses to lessons, activities, and assessments across 4 modules covering topics like computer components, cabling, operating systems, and security. Questions range from multiple choice to fill-in-the-blank and the student has provided answers for over 300 individual questions in total across the various lessons and modules.
The document provides information on configuring client device systems, which involves setting default preferences for devices connected to a network. It discusses configuring time and date, computer name, network drivers, and installing software applications. Specific steps are outlined for configuring client devices in Windows 7, 8, and 10 by setting the time and date, computer name, installing network drivers, and necessary software applications like MS Office and antivirus, in accordance with manufacturer instructions and user preferences.
This document contains information about the layout, maintenance schedules, and resources of a computer laboratory workshop for training Computer System Servicing NC II students. It includes a layout diagram of the workshop, housekeeping and equipment maintenance schedules, inspection checklists, waste segregation procedures, a repair report form, and a equipment purchase request form. The workshop contains computer stations, servers, tools, and shares areas for quality control and support services with another training program.
This document outlines the curriculum for an exploratory course on technical drafting for Grade 7/8 students. The course introduces five common competencies: using tools and equipment, maintaining tools and instruments, performing measurements and calculations, interpreting technical drawings, and practicing occupational health and safety. It covers lessons in personal entrepreneurial skills, understanding the environment and market, tool use, tool maintenance, measurement, and interpreting technical drawings. Each lesson includes learning competencies and performance standards to teach students basic concepts and skills in technical drafting.
Lesson 6 - TERMINATING AND CONNECTING ELECTRICAL WIRING AND ELECTRONICS CIRCU...EdselEscober
This document discusses conductors and insulators in electrical wiring. Conductors such as copper and silver allow electrons to flow, while insulators such as rubber and plastic block electron flow. It also discusses different types of wires and cables, such as solid versus stranded wires, and twisted pair, multi-conductor, coaxial, and fiber optic cables. The document concludes by covering different methods for terminating and connecting wires, including soldering, crimping, and using various connectors.
CSS L01 - Introduction to Computer System Servicing (NCII)Marvin Bronoso
The document provides information about Computer Systems Servicing (CSS) NCII. It begins by explaining how CSS NCII upgraded and expanded upon the previous Computer Hardware Servicing (CHS) NCII qualification. The document then outlines the key differences between CHS NCII and CSS NCII, noting the expanded modules and competencies covered in CSS NCII. It proceeds to discuss occupational safety and health policies and procedures for computer system servicing, listing 12 specific safety guidelines to follow.
This document outlines the most essential learning competencies for the Technology and Livelihood Education - Information and Communication Technology curriculum for Grade 10 students in the Philippines. It details the content standards, performance standards, learning competencies, and duration for two lessons: Setting Up Computer Networks and Setting Up Computer Servers. The lessons will teach students to configure network and wireless settings, inspect and test computer networks, set up user access and network services on a computer server.
COMPUTER SYSTEM SERVICING NC II CURRICULUM GUIDEJohndion Ruloma
The document outlines various technical-vocational tracks and specializations available in the K to 12 Basic Education Program in the Philippines. It includes 24 pages describing specializations in agri-fishery arts, home economics, industrial arts, and information and communications technology. For each specialization, it provides the number of hours and any prerequisite courses required. It then describes the computer systems servicing course, which covers common and core competencies over 640 hours to achieve a National Certificate Level II in that area. The document provides a comprehensive reference for the technical-vocational curriculum under the K to 12 Basic Education Program.
This document outlines the budget of work for a 10-week course on installing and configuring computer systems. It is divided into two quarters. The first quarter focuses on occupational health and safety procedures, identifying installation tools and materials, and installing computer hardware and peripherals. The second quarter covers preparing bootable devices, configuring the BIOS, installing operating systems and drivers, and installing/uninstalling Windows applications. Key topics include creating partitions, formatting storage, installing Windows 7/10 and Office software. Students will be assessed through performance assessments and a quarterly institutional assessment. The goal is for students to understand and apply principles for installing and configuring computer systems based on procedures and system requirements.
TLE7 EIM Week 4 3rd Q analyzing symbols and data.pptxJOANNAMAEDAVID
This document discusses analyzing electrical signs, symbols, and data. It defines common electrical symbols used in schematic diagrams and plans. Examples of electrical symbols, signs like voltage danger and electrical hazard, and different types of circuits like series and parallel are shown. The document also discusses interpreting technical drawings like pictorial diagrams, schematic diagrams, and electrical plans. It provides an example of matching electrical symbols and counting fixtures from an electrical plan.
This document summarizes a class on hand tools for computer system servicing. The class objectives were to identify appropriate hand tools for tasks, understand tools and equipment for computer servicing, and classify different hardware tools. Students participated in activities to classify tools, watch an instructional video, and identify tools needed for a computer troubleshooting scenario. The class covered identifying hand tools, equipment, computer technicians, and personal protective equipment. Students were evaluated on their ability to select appropriate hand tools according to task requirements.
This document provides a lesson plan for a Grade 10 Computer Systems Servicing class on setting up computer networks. The objectives are to be able to set up computer networks based on established procedures and system requirements for hardware. The lesson will involve planning cable routes, identifying tools used in making modular I/O and patch panel connections, and citing the benefits of using these materials. Students will participate in activities like planning a cable installation, identifying differences between illustrations, and listing tools and their functions.
Computer Systems Servicing National Certificate Level II (NC II).
BASIC COMPETENCIES
Participate in Workplace Communication
Work in Team Environment
Practice Career Professionalism
Practice Occupational Health and Safety Procedures
Note: References/Source not included, forgot to attached po.. Credits to all those original owner of the information.. No intentions of copyright infringement..
Lesson 2 in Computer Systems Servicing that is aligned to DepEd's K-12 program and the TESDA. Check the video on my YouTube channel - Joel Tiemsin. Please don't forget to subscribe.
PowerPoint files can be shared to my YouTube subscribers. Just email me at mjtiemsin@gmail.com.
Website: https://www.jlt24.com/
YouTube Channel: https://www.youtube.com/channel/UCeekQj8lI45sqchbwaYWMtA?view_as=subscriber
TESDA TM1 Portfolio Computer Systems Servicing NC IIIan Mars Acut
Rosita Navarro
a
c
a. Cebuano
Characteristics of learners
Educational
background
Highest educational
attainment:
a. College graduate
b. College level
c. High school
graduate
d. High school level
e. Elementary
graduate
f. Elementary level
g. No formal
education
c. High school graduate
Work experience
Years of work
experience:
a. 5 years and above
b. 3-4 years
c. 1-2 years
d. Less than 1 year
e. No work experience
c. 1-2 years
Characteristics of learners
Learning style
Preferred learning
style:
This document provides instructions on making straight and crossover Ethernet cable connections, including the color combinations used for each, how to strip and crimp the cables, and how to test the connections. The objectives are to understand the uses of straight and crossover cables, identify their color combinations, demonstrate and make both cable connections, and appreciate their applications. Hands-on tasks are included to have students physically make the cable connections.
is highly competitive, and driven by considerations of technology, innovation, quality, cost effectiveness, timeliness and excellence in service delivery, Government organisations cannot afford to lag behind
Program/Course : Computer System Servicing NC II
Unit of Competency : Set-up Computer Networks
Module : Install Network Cables
Learning Outcome 01: Installing Network Cables
for full compilation just visit my website.
http://computersystemsolution.com/
This document outlines the training regulations for the Computer Hardware Servicing NC II Qualification in the Philippines. It contains 4 sections that cover: 1) the qualification requirements which include basic, common and core competencies, 2) the competency standards for each unit, 3) the training standards covering curriculum, delivery, facilities etc., and 4) arrangements for national assessment and certification. The qualification enables individuals to diagnose and troubleshoot problems in personal computer systems, replace parts, and restore normal operation as a Computer Service Technician or Computer Repairman.
The document provides the training regulations for the Computer Systems Servicing NC II Qualification. It consists of 4 sections that cover: (1) the qualification components and units of competency, (2) the competency standards for basic, common and core competencies, (3) the training standards covering curriculum, delivery, entry requirements, tools/equipment, facilities and trainers, and (4) arrangements for national assessment and certification. The qualification is designed to enable trainees to install, configure, maintain and repair computer systems and networks.
This document identifies tools and equipment used in computer systems and networks. It presents three statements about pliers, a soldering gun, and screws as part of a "Fact or Bluff" game to determine their uses and functions. The document aims to help students learn the different tools and equipment used in computer systems and identify their various uses and functions. References for further information are also provided.
This document outlines a competency-based curriculum for a Computer Hardware Servicing NC II qualification. It includes 392 hours of training delivered through modules covering basic, common, and core competencies. Basic competencies focus on workplace communication, teamwork, professionalism, and safety. Common competencies include quality standards, computer operation, measurement, technical drawing, hand tools, and electrical wiring. Core competencies center on installing, diagnosing, configuring, and maintaining computer systems and networks. Assessment involves hands-on demonstration, observation, exams, and discussion. The course uses lecture, self-paced learning, and group work delivered by a qualified trainer.
This document contains an answer sheet for a student named Section in the Damilag Integrated School for their TLE 10 ICT - Computer System Servicing class. The answer sheet includes responses to lessons, activities, and assessments across 4 modules covering topics like computer components, cabling, operating systems, and security. Questions range from multiple choice to fill-in-the-blank and the student has provided answers for over 300 individual questions in total across the various lessons and modules.
The document provides information on configuring client device systems, which involves setting default preferences for devices connected to a network. It discusses configuring time and date, computer name, network drivers, and installing software applications. Specific steps are outlined for configuring client devices in Windows 7, 8, and 10 by setting the time and date, computer name, installing network drivers, and necessary software applications like MS Office and antivirus, in accordance with manufacturer instructions and user preferences.
This document contains information about the layout, maintenance schedules, and resources of a computer laboratory workshop for training Computer System Servicing NC II students. It includes a layout diagram of the workshop, housekeeping and equipment maintenance schedules, inspection checklists, waste segregation procedures, a repair report form, and a equipment purchase request form. The workshop contains computer stations, servers, tools, and shares areas for quality control and support services with another training program.
This document outlines the curriculum for an exploratory course on technical drafting for Grade 7/8 students. The course introduces five common competencies: using tools and equipment, maintaining tools and instruments, performing measurements and calculations, interpreting technical drawings, and practicing occupational health and safety. It covers lessons in personal entrepreneurial skills, understanding the environment and market, tool use, tool maintenance, measurement, and interpreting technical drawings. Each lesson includes learning competencies and performance standards to teach students basic concepts and skills in technical drafting.
Lesson 6 - TERMINATING AND CONNECTING ELECTRICAL WIRING AND ELECTRONICS CIRCU...EdselEscober
This document discusses conductors and insulators in electrical wiring. Conductors such as copper and silver allow electrons to flow, while insulators such as rubber and plastic block electron flow. It also discusses different types of wires and cables, such as solid versus stranded wires, and twisted pair, multi-conductor, coaxial, and fiber optic cables. The document concludes by covering different methods for terminating and connecting wires, including soldering, crimping, and using various connectors.
CSS L01 - Introduction to Computer System Servicing (NCII)Marvin Bronoso
The document provides information about Computer Systems Servicing (CSS) NCII. It begins by explaining how CSS NCII upgraded and expanded upon the previous Computer Hardware Servicing (CHS) NCII qualification. The document then outlines the key differences between CHS NCII and CSS NCII, noting the expanded modules and competencies covered in CSS NCII. It proceeds to discuss occupational safety and health policies and procedures for computer system servicing, listing 12 specific safety guidelines to follow.
This document outlines the most essential learning competencies for the Technology and Livelihood Education - Information and Communication Technology curriculum for Grade 10 students in the Philippines. It details the content standards, performance standards, learning competencies, and duration for two lessons: Setting Up Computer Networks and Setting Up Computer Servers. The lessons will teach students to configure network and wireless settings, inspect and test computer networks, set up user access and network services on a computer server.
COMPUTER SYSTEM SERVICING NC II CURRICULUM GUIDEJohndion Ruloma
The document outlines various technical-vocational tracks and specializations available in the K to 12 Basic Education Program in the Philippines. It includes 24 pages describing specializations in agri-fishery arts, home economics, industrial arts, and information and communications technology. For each specialization, it provides the number of hours and any prerequisite courses required. It then describes the computer systems servicing course, which covers common and core competencies over 640 hours to achieve a National Certificate Level II in that area. The document provides a comprehensive reference for the technical-vocational curriculum under the K to 12 Basic Education Program.
This document outlines the budget of work for a 10-week course on installing and configuring computer systems. It is divided into two quarters. The first quarter focuses on occupational health and safety procedures, identifying installation tools and materials, and installing computer hardware and peripherals. The second quarter covers preparing bootable devices, configuring the BIOS, installing operating systems and drivers, and installing/uninstalling Windows applications. Key topics include creating partitions, formatting storage, installing Windows 7/10 and Office software. Students will be assessed through performance assessments and a quarterly institutional assessment. The goal is for students to understand and apply principles for installing and configuring computer systems based on procedures and system requirements.
TLE7 EIM Week 4 3rd Q analyzing symbols and data.pptxJOANNAMAEDAVID
This document discusses analyzing electrical signs, symbols, and data. It defines common electrical symbols used in schematic diagrams and plans. Examples of electrical symbols, signs like voltage danger and electrical hazard, and different types of circuits like series and parallel are shown. The document also discusses interpreting technical drawings like pictorial diagrams, schematic diagrams, and electrical plans. It provides an example of matching electrical symbols and counting fixtures from an electrical plan.
This document summarizes a class on hand tools for computer system servicing. The class objectives were to identify appropriate hand tools for tasks, understand tools and equipment for computer servicing, and classify different hardware tools. Students participated in activities to classify tools, watch an instructional video, and identify tools needed for a computer troubleshooting scenario. The class covered identifying hand tools, equipment, computer technicians, and personal protective equipment. Students were evaluated on their ability to select appropriate hand tools according to task requirements.
This document provides a lesson plan for a Grade 10 Computer Systems Servicing class on setting up computer networks. The objectives are to be able to set up computer networks based on established procedures and system requirements for hardware. The lesson will involve planning cable routes, identifying tools used in making modular I/O and patch panel connections, and citing the benefits of using these materials. Students will participate in activities like planning a cable installation, identifying differences between illustrations, and listing tools and their functions.
Computer Systems Servicing National Certificate Level II (NC II).
BASIC COMPETENCIES
Participate in Workplace Communication
Work in Team Environment
Practice Career Professionalism
Practice Occupational Health and Safety Procedures
Note: References/Source not included, forgot to attached po.. Credits to all those original owner of the information.. No intentions of copyright infringement..
Lesson 2 in Computer Systems Servicing that is aligned to DepEd's K-12 program and the TESDA. Check the video on my YouTube channel - Joel Tiemsin. Please don't forget to subscribe.
PowerPoint files can be shared to my YouTube subscribers. Just email me at mjtiemsin@gmail.com.
Website: https://www.jlt24.com/
YouTube Channel: https://www.youtube.com/channel/UCeekQj8lI45sqchbwaYWMtA?view_as=subscriber
TESDA TM1 Portfolio Computer Systems Servicing NC IIIan Mars Acut
Rosita Navarro
a
c
a. Cebuano
Characteristics of learners
Educational
background
Highest educational
attainment:
a. College graduate
b. College level
c. High school
graduate
d. High school level
e. Elementary
graduate
f. Elementary level
g. No formal
education
c. High school graduate
Work experience
Years of work
experience:
a. 5 years and above
b. 3-4 years
c. 1-2 years
d. Less than 1 year
e. No work experience
c. 1-2 years
Characteristics of learners
Learning style
Preferred learning
style:
This document provides instructions on making straight and crossover Ethernet cable connections, including the color combinations used for each, how to strip and crimp the cables, and how to test the connections. The objectives are to understand the uses of straight and crossover cables, identify their color combinations, demonstrate and make both cable connections, and appreciate their applications. Hands-on tasks are included to have students physically make the cable connections.
is highly competitive, and driven by considerations of technology, innovation, quality, cost effectiveness, timeliness and excellence in service delivery, Government organisations cannot afford to lag behind
Program/Course : Computer System Servicing NC II
Unit of Competency : Set-up Computer Networks
Module : Install Network Cables
Learning Outcome 01: Installing Network Cables
for full compilation just visit my website.
http://computersystemsolution.com/
This document outlines the training regulations for the Computer Hardware Servicing NC II Qualification in the Philippines. It contains 4 sections that cover: 1) the qualification requirements which include basic, common and core competencies, 2) the competency standards for each unit, 3) the training standards covering curriculum, delivery, facilities etc., and 4) arrangements for national assessment and certification. The qualification enables individuals to diagnose and troubleshoot problems in personal computer systems, replace parts, and restore normal operation as a Computer Service Technician or Computer Repairman.
The document provides the training regulations for the Computer Systems Servicing NC II Qualification. It consists of 4 sections that cover: (1) the qualification components and units of competency, (2) the competency standards for basic, common and core competencies, (3) the training standards covering curriculum, delivery, entry requirements, tools/equipment, facilities and trainers, and (4) arrangements for national assessment and certification. The qualification is designed to enable trainees to install, configure, maintain and repair computer systems and networks.
The document outlines training regulations for the Computer Hardware Servicing NC II Qualification, including the competency standards, training standards, and assessment arrangements. It defines the basic, common, and core competencies required to diagnose and troubleshoot problems in personal computer systems. The qualification enables individuals to service computer hardware and get systems back to normal operation.
This document outlines the training regulations for the Computer Systems Servicing NC II Qualification in the Philippines. The qualification consists of basic, common and core competencies required to install, configure, maintain and repair computer systems and networks. Section 1 defines the scope of the qualification. Section 2 describes the competency standards covering basic skills like communication, as well as technical skills related to computer servicing. Section 3 discusses training standards, including the curriculum, delivery, entry requirements and facilities/equipment needed. Section 4 addresses assessment and certification.
This document outlines the training regulations for the Horticulture NC II Qualification in the Philippines. It includes:
- An overview of the qualification and list of competencies required.
- Details of the basic, common, and core competencies comprising horticultural skills like farm operations, crop production, and post-harvest handling.
- Sections on the training standards, assessment arrangements, and definitions to ensure consistency in horticulture training.
The qualification is designed to develop horticultural workers in roles like farm aides, caretakers, and vegetable or fruit farmers. Regulations aim to standardize training to promote safety and quality in horticultural practice.
This document outlines the training regulations for the Front Office Services NC II Qualification in the Tourism Sector. It contains six sections that discuss the qualification components and requirements. Section 1 defines the units of competency for basic, common and core competencies. Section 2 provides the details of each competency standard. Sections 3-5 specify the training standards, assessment and certification arrangements. The final sections include a competency map and definitions. The overall purpose is to establish a national qualification for front office services occupations in hotels and restaurants.
Training Regulation Housekeeping NC II TESDAemelynaborot1
The document provides the training regulations for Housekeeping NC II in the Tourism Sector. It outlines the following:
1) The competencies required to achieve the Housekeeping NC II Qualification, which includes preparing rooms, cleaning public areas, providing housekeeping services, and more.
2) The sections of the regulations which define the qualification, competency standards, training standards, and national assessment and certification arrangements.
3) The units of competency comprising the qualification, including basic, common, and core competencies.
4) Details of the competency standards, which specify the skills, knowledge, and attitudes needed for effective work performance.
This document provides the training regulations for the Metal Stamping NC II Qualification in the Philippines. It outlines the units of competency required, including basic, common and core competencies. It describes the curriculum and assessment approach. The core competencies focus on setting up and operating mechanical presses and shearing equipment for metal stamping operations. The document provides information on training delivery and assessment to achieve this technical vocational qualification.
This document outlines the training regulations for the Food and Beverage Services NC II Qualification in the Tourism Sector. It includes 4 sections that cover: 1) the competencies required to achieve the qualification, 2) the competency standards which are broken down into basic, common and core competencies, 3) the training standards which specify the curriculum, delivery, entry requirements and more, and 4) arrangements for national assessment and certification. The qualification prepares individuals for jobs like busboy, waiter, food attendant and food server in hotels, restaurants and other establishments.
This document outlines the training regulations for the Consumer Electronics Servicing NC II Qualification in the Philippines. It includes the following sections:
1. The qualification consists of competencies required to assemble, maintain, repair consumer electronic products like appliances, audio-video systems, and cellular phones.
2. The units of competency which make up the qualification, including basic, common, and core competencies.
3. The competency standards that define the skills, knowledge, and attitudes for each competency.
4. Standards for training and assessment/certification for obtaining this qualification.
This document outlines the training regulations for the Bread and Pastry Production NC II Qualification in the Philippines. It includes the competencies required to achieve the qualification, which are divided into basic, common and core competencies. It also provides information on the curriculum design and delivery, entry requirements, tools and equipment needed, and assessment process. The qualification consists of competencies required to clean equipment and prepare, portion and present pastries, breads and dessert items in hotels, restaurants and other food service operations.
The document outlines the training regulations for Pest Management (Vegetables) NC II. It includes the following sections:
1. Qualification which describes the competencies covered in pest management for vegetables.
2. Competency standards which define the basic, common and core competencies.
3. Training standards covering the curriculum, delivery, entry requirements and facilities.
4. National assessment and certification arrangements.
The document provides the framework for developing a training program for pest management technicians focusing on vegetables.
Tr electronic products assembly and servicing nc iiRonualdoLirio1
This document provides the training regulations for the Electronic Products Assembly and Servicing National Certificate Level II qualification in the Philippines.
It outlines the competency standards, training standards, and assessment arrangements. The qualification consists of basic competencies in workplace communication, teamwork, and safety. It also includes common competencies in quality standards, technical drawing, and using hand tools. The core competencies cover assembling electronic products, servicing consumer electronics, and servicing industrial electronics.
Successful trainees would be competent to work as electronic assemblers, appliance technicians, audio-video technicians, or industrial electronics technicians. The regulations define the curriculum, facilities, trainer qualifications, and competency map required to deliver the training program.
This document outlines the training regulations for the Organic Agriculture Production NC II Qualification in the Philippines. It includes 4 sections that define the qualification components, competency standards, training standards, and national assessment and certification arrangements. The qualification consists of basic, common, core and elective competencies related to organic agriculture production. The training standards section specifies the curriculum design, delivery methods, entry requirements, tools/equipment, facilities, trainer qualifications and assessment for the qualification.
The document outlines the training regulations for the Events Management Services NC III Qualification which consists of competencies needed to coordinate events. It details the basic, common, and core competencies comprising the qualification including event planning, on-site event management, and qualifications needed for jobs like events coordinator. The regulations provide information on curriculum design, delivery, assessment and certification arrangements for the qualification.
The document outlines the training regulations for the Events Management Services NC III Qualification. It includes 22 competency units covering basic, common, and core competencies required for the qualification. The basic competencies include leading workplace communication, small teams, and using relevant technologies. The common competencies involve rostering staff, controlling stock, and establishing business relationships. The core competencies focus on event planning, development, management, and updating industry knowledge.
The document outlines the training regulations for the Events Management Services NC III Qualification which consists of competencies needed to coordinate events. It details the basic, common, and core competencies covering areas such as event planning, on-site event management, rostering staff, and developing business relationships. The qualifications framework, units of competency, assessment arrangements, and other implementation considerations are provided.
The document outlines the training regulations for the Events Management Services NC III Qualification which consists of competencies needed to coordinate events. It details the basic, common, and core competencies comprising the qualification including event planning, on-site event management, and qualifications needed for jobs like events coordinator. The regulations provide information on curriculum design, delivery, assessment and certification arrangements for the qualification.
TR - Animal Health Care and Management NC III.pdfAljonBalanag1
This document outlines the training regulations for the Animal Health Care and Management NC III Qualification in the Philippines. The qualification consists of basic, common, and core competencies required to provide livestock health care in farms under veterinarian supervision. Sections include the qualification components, competency standards, training standards, assessment and certification arrangements, and definitions. The training regulations are intended to guide Technical Vocational Education and Training providers in designing programs to develop skills in areas such as restraining animals, administering drugs, biosecurity measures, and more.
1. TR - PC OPERATIONS NC II 1
TRAINING
REGULATIONS
PC OPERATIONS NC II
INFORMATION AND COMMUNICATIONS
TECHNOLOGY (ICT) SECTOR
TECHNICAL EDUCATION AND SKILLS DEVELOPMENT
AUTHORITY
East Service Road, South Superhighway, Taguig City, Metro Manila
2. TABLE OF CONTENTS
ICT SECTOR
PC OPERATIONS
NATIONAL CERTIFICATE LEVEL II
Page No.
SECTION 1 PC OPERATIONS NC II
QUALIFICATIONS
1
SECTION 2 COMPETENCY STANDARDS 2 - 38
• Basic Competencies 2 - 15
• Common Competencies 16 - 22
• Core Competencies 23 - 37
SECTION 3 TRAINING STANDARDS 38 - 41
SECTION 4
ASSESSMENT AND CERTIFICATION
ARRANGEMENTS
42
COMPETENCY MAP
DEFINITION OF TERMS 43 - 44
ACKNOWLEDGEMENT
TR - PC OPERATIONS NC II 2
3. TRAINING REGULATIONS FOR PC OPERATIONS NC II
Section 1 PC OPERATIONS NC II QUALIFICATIONS
The PC OPERATIONS NC II Qualification consists of competencies that will
allow effective and efficient use of personal computers where use of word
processing, spreadsheets, and presentation software is required including access to
email and the use of web browsers for searching and locating data and information
on the Internet..
The units of competency comprising this qualification include the following:
UNIT CODE BASIC COMPETENCIES
500311105 Participate in workplace communication
500311106 Work in a team environment
500311107 Practice career professionalism
500311108 Practice occupational health and safety procedures
UNIT CODE COMMON COMPETENCIES
ICT315202 Apply quality standards
ICT311201 Operate a personal computer
UNIT CODE CORE COMPETENCIES
ICT313324 Operate a word-processing application
ICT313327 Use email and search the web using browsers
ICT313325 Operate a spreadsheet application
ICT313326 Operate a presentation package
A person who has achieved this Qualification is competent to be:
• Office clerks and assistants
• Data-entry encoders and typists
• PC operators
________________________________________________________________________________________________
TR – PC OPERATIONS NC II Promulgated ______________ 2005
3
4. SECTION 2 COMPETENCY STANDARDS
This section gives the details of the contents of the basic, common and core
units of competency required in PC Operations NC II.
BASIC COMPETENCIES
UNIT OF COMPETENCY : PARTICIPATE IN WORKPLACE COMMUNICATION
UNIT CODE : 500311105
UNIT DESCRIPTOR : This unit covers the knowledge, skills and attitudes
required to gather, interpret and convey information in
response to workplace requirements.
ELEMENT PERFORMANCE CRITERIA
Italicized terms are elaborated in the Range of Variables
1. Obtain and convey
workplace
information
1.1 Specific and relevant information is accessed from
appropriate sources
1.2 Effective questioning , active listening and speaking
skills are used to gather and convey information
1.3 Appropriate medium is used to transfer information
and ideas
1.4 Appropriate non- verbal communication is used
1.5 Appropriate lines of communication with supervisors
and colleagues are identified and followed
1.6 Defined workplace procedures for the location and
storage of information are used
1.7 Personal interaction is carried out clearly and concisely
2. Participate in
workplace meetings
and discussions
2.1 Team meetings are attended on time
2.2 Own opinions are clearly expressed and those of
others are listened to without interruption
2.3 Meeting inputs are consistent with the meeting purpose
and established protocols
2.4 Workplace interactions are conducted in a courteous
manner
2.5 Questions about simple routine workplace procedures
and maters concerning working conditions of
employment are asked and responded to
2.6 Meetings outcomes are interpreted and implemented
3. Complete relevant
work related
documents
3.1 Range of forms relating to conditions of employment
are completed accurately and legibly
3.2 Workplace data is recorded on standard workplace
forms and documents
3.3 Basic mathematical processes are used for routine
calculations
3.4 Errors in recording information on forms/ documents
are identified and properly acted upon
3.5 Reporting requirements to supervisor are completed
according to organizational guidelines
________________________________________________________________________________________________
TR – PC OPERATIONS NC II Promulgated ______________ 2005
4
5. RANGE OF VARIABLES
VARIABLE RANGE
1. Appropriate sources 1.1. Team members
1.2. Suppliers
1.3. Trade personnel
1.4. Local government
1.5. Industry bodies
2. Medium 2.1. Memorandum
2.2. Circular
2.3. Notice
2.4. Information discussion
2.5. Follow-up or verbal instructions
2.6. Face to face communication
3. Storage 3.1. Manual filing system
3.2. Computer-based filing system
4. Forms 4.1. Personnel forms, telephone message forms,
safety reports
5. Workplace interactions 5.1. Face to face
5.2. Telephone
5.3. Electronic and two way radio
5.4. Written including electronic, memos, instruction
and forms, non-verbal including gestures,
signals, signs and diagrams
6. Protocols 6.1. Observing meeting
6.2. Compliance with meeting decisions
6.3. Obeying meeting instructions
________________________________________________________________________________________________
TR – PC OPERATIONS NC II Promulgated ______________ 2005
5
6. EVIDENCE GUIDE
1. Critical Aspects of
Competency
Assessment requires evidence that the candidate:
1.1. Prepared written communication following standard
format of the organization
1.2. Accessed information using communication
equipment
1.3. Made use of relevant terms as an aid to transfer
information effectively
1.4. Conveyed information effectively adopting the
formal or informal communication
2. Underpinning
Knowledge and
Attitudes
2.1. Effective communication
2.2. Different modes of communication
2.3. Written communication
2.4. Organizational policies
2.5. Communication procedures and systems
2.6. Technology relevant to the enterprise and the
individual’s work responsibilities
3. Underpinning Skills 3.1. Follow simple spoken language
3.2. Perform routine workplace duties following simple
written notices
3.3. Participate in workplace meetings and discussions
3.4. Complete work related documents
3.5. Estimate, calculate and record routine workplace
measures
3.6. Basic mathematical processes of addition,
subtraction, division and multiplication
3.7. Ability to relate to people of social range in the
workplace
3.8. Gather and provide information in response to
workplace Requirements
4. Resource
Implications
4.1. Fax machine
4.2. Telephone
4.3. Writing materials
4.4. Internet
5. Methods of
Assessment
5.1. Direct Observation
5.2. Oral interview and written test
6. Context of
Assessment
6.1. Competency may be assessed individually in the
actual workplace or through accredited institution
________________________________________________________________________________________________
TR – PC OPERATIONS NC II Promulgated ______________ 2005
6
7. UNIT OF COMPETENCY: WORK IN TEAM ENVIRONMENT
UNIT CODE : 500311106
UNIT DESCRIPTOR : This unit covers the skills, knowledge and attitudes to
identify role and responsibility as a member of a team.
ELEMENT PERFORMANCE CRITERIA
Italicized terms are elaborated in the Range of Variables
1. Describe team role
and scope
1.1. The role and objective of the team is identified from
available sources of information
1.2. Team parameters, reporting relationships and
responsibilities are identified from team discussions
and appropriate external sources
2. Identify own role
and responsibility
within team
2.1. Individual role and responsibilities within the team
environment are identified
2.2. Roles and responsibility of other team members are
identified and recognized
2.3. Reporting relationships within team and external to
team are identified
3. Work as a team
member
3.1. Effective and appropriate forms of communications
used and interactions undertaken with team members
who contribute to known team activities and
objectives
3.2. Effective and appropriate contributions made to
complement team activities and objectives, based on
individual skills and competencies and workplace
context
3.3. Observed protocols in reporting using standard
operating procedures
3.4. Contribute to the development of team work plans
based on an understanding of team’s role and
objectives and individual competencies of the
members.
________________________________________________________________________________________________
TR – PC OPERATIONS NC II Promulgated ______________ 2005
7
8. RANGE OF VARIABLES
VARIABLE RANGE
1. Role and objective
of team
1.1. Work activities in a team environment with
enterprise or specific sector
1.2. Limited discretion, initiative and judgement maybe
demonstrated on the job, either individually or in a
team environment
2. Sources of
information
2.1. Standard operating and/or other workplace
procedures
2.2. Job procedures
2.3. Machine/equipment manufacturer’s specifications
and instructions
2.4. Organizational or external personnel
2.5. Client/supplier instructions
2.6. Quality standards
2.7. OHS and environmental standards
3. Workplace context 3.1. Work procedures and practices
3.2. Conditions of work environments
3.3. Legislation and industrial agreements
3.4. Standard work practice including the storage, safe
handling and disposal of chemicals
3.5. Safety, environmental, housekeeping and quality
guidelines
________________________________________________________________________________________________
TR – PC OPERATIONS NC II Promulgated ______________ 2005
8
9. EVIDENCE GUIDE
1. Critical aspects of
competency
Assessment requires evidence that the candidate:
1.1. Operated in a team to complete workplace activity
1.2. Worked effectively with others
1.3. Conveyed information in written or oral form
1.4. Selected and used appropriate workplace language
1.5. Followed designated work plan for the job
1.6. Reported outcomes
2. Underpinning
Knowledge and
Attitude
2.1. Communication process
2.2. Team structure
2.3. Team roles
2.4. Group planning and decision making
3. Underpinning Skills 3.1. Communicate appropriately, consistent with the
culture of the workplace
4. Resource
Implications
The following resources MUST be provided:
4.1. Access to relevant workplace or appropriately
simulated environment where assessment can take
place
4.2. Materials relevant to the proposed activity or tasks
5. Methods of
Assessment
Competency may be assessed through:
5.1. Observation of the individual member in relation to
the work activities of the group
5.2. Observation of simulation and or role play involving
the participation of individual member to the
attainment of organizational goal
5.3. Case studies and scenarios as a basis for discussion
of issues and strategies in teamwork
6. Context for
Assessment
6.1. Competency may be assessed in workplace or in a
simulated workplace setting
6.2. Assessment shall be observed while task are being
undertaken whether individually or in group
________________________________________________________________________________________________
TR – PC OPERATIONS NC II Promulgated ______________ 2005
9
10. UNIT OF COMPETENCY: PRACTICE CAREER PROFESSIONALISM
UNIT CODE : 500311107
UNIT DESCRIPTOR : This unit covers the knowledge, skills and attitudes in
promoting career growth and advancement.
ELEMENT
PERFORMANCE CRITERIA
Italicized terms are elaborated in the Range of Variables
1. Integrate personal
objectives with
organizational goals
1.1Personal growth and work plans are pursued towards
improving the qualifications set for the profession
1.2Intra- and interpersonal relationships are maintained in
the course of managing oneself based on performance
evaluation
1.3Commitment to the organization and its goal is
demonstrated in the performance of duties
1. Set and meet work
priorities
2.1 Competing demands are prioritized to achieve
personal, team and organizational goals and objectives.
2.2Resources are utilized efficiently and effectively to
manage work priorities and commitments
2.3Practices along economic use and maintenance of
equipment and facilities are followed as per
established procedures
2. Maintain
professional growth
and development
3.1 Trainings and career opportunities are identified
and availed of based on job requirements
3.2 Recognitions are sought/received and demonstrated
as proof of career advancement
3.3 Licenses and/or certifications relevant to job and
career are obtained and renewed
________________________________________________________________________________________________
TR – PC OPERATIONS NC II Promulgated ______________ 2005
10
11. RANGE OF VARIABLES
VARIABLE RANGE
1. Evaluation 1.1 Performance Appraisal
1.2 Psychological Profile
1.3 Aptitude Tests
2. Resources 2.1 Human
2.2 Financial
2.3 Technology
2.3.1 Hardware
2.3.2 Software
3. Trainings and career
opportunities
3.1 Participation in training programs
3.1.1 Technical
3.1.2 Supervisory
3.1.3 Managerial
3.1.4 Continuing Education
3.2 Serving as Resource Persons in conferences and
workshops
4. Recognitions 4.1 Recommendations
4.2 Citations
4.3 Certificate of Appreciations
4.4 Commendations
4.5 Awards
4.6 Tangible and Intangible Rewards
5. Licenses and/or
certifications
5.1 National Certificates
5.2 Certificate of Competency
5.3 Support Level Licenses
5.4 Professional Licenses
________________________________________________________________________________________________
TR – PC OPERATIONS NC II Promulgated ______________ 2005
11
12. EVIDENCE GUIDE
1. Critical Aspects of
Competency
Assessment requires evidence that the candidate:
1.1 Attained job targets within key result areas (KRAs)
1.2 Maintained intra - and interpersonal relationship in the
course of managing oneself based on performance
evaluation
1.3 Completed trainings and career opportunities which are
based on the requirements of the industries
1.4 Acquired and maintained licenses and/or certifications
according to the requirement of the qualification
2. Underpinning
Knowledge
2.1 Work values and ethics (Code of Conduct, Code of
Ethics, etc.)
2.2 Company policies
2.3 Company operations, procedures and standards
2.4 Fundamental rights at work including gender sensitivity
2.5 Personal hygiene practices
3. Underpinning Skills 3.1 Appropriate practice of personal hygiene
3.2 Intra and Interpersonal skills
3.3 Communication skills
4. Resource
Implications
The following resources MUST be provided:
4.1 Workplace or assessment location
4.2 Case studies/scenarios
5. Methods of
Assessment
Competency may be assessed through:
5.1 Portfolio Assessment
5.2 Interview
5.3 Simulation/Role-plays
5.4 Observation
5.5 Third Party Reports
5.6 Exams and Tests
6. Context of
Assessment
6.1 Competency may be assessed in the work place or in a
simulated work place setting
________________________________________________________________________________________________
TR – PC OPERATIONS NC II Promulgated ______________ 2005
12
13. UNIT OF COMPETENCY : PRACTICE OCCUPATIONAL HEALTH AND SAFETY
PROCEDURES
UNIT CODE : 500311108
UNIT DESCRIPTOR : This unit covers the outcomes required to comply with
regulatory and organizational requirements for
occupational health and safety.
ELEMENT
PERFORMANCE CRITERIA
Italicized terms are elaborated in the Range of Variables
1. Identify hazards and
risks
1.1 Safety regulations and workplace safety and
hazard control practices and procedures are
clarified and explained based on organization
procedures
1.2 Hazards/risks in the workplace and their
corresponding indicators are identified to minimize
or eliminate risk to co-workers, workplace and
environment in accordance with organization
procedures
1.3 Contingency measures during workplace
accidents, fire and other emergencies are
recognized and established in accordance with
organization procedures
2. Evaluate hazards and
risks
2.1Terms of maximum tolerable limits which when
exceeded will result in harm or damage are
identified based on threshold limit values (TLV)
2.2Effects of the hazards are determined
2.3OHS issues and/or concerns and identified safety
hazards are reported to designated personnel in
accordance with workplace requirements and
relevant workplace OHS legislation
________________________________________________________________________________________________
TR – PC OPERATIONS NC II Promulgated ______________ 2005
13
14. ELEMENT
PERFORMANCE CRITERIA
Italicized terms are elaborated in the Range of Variables
3. Control hazards and
risks
3.1Occupational Health and Safety (OHS) procedures for
controlling hazards/risks in workplace are consistently
followed
3.2Procedures for dealing with workplace accidents, fire and
emergencies are followed in accordance with
organization OHS policies
3.3Personal protective equipment (PPE) is correctly used
in accordance with organization OHS procedures and
practices
3.4Appropriate assistance is provided in the event of a
workplace emergency in accordance with established
organization protocol
4. Maintain OHS
awareness
4.1Emergency-related drills and trainings are
participated in as per established organization
guidelines and procedures
4.2OHS personal records are completed and updated in
accordance with workplace requirements
________________________________________________________________________________________________
TR – PC OPERATIONS NC II Promulgated ______________ 2005
14
15. RANGE OF VARIABLES
VARIABLE RANGE
1. Safety regulations May include but are not limited to:
1.1 Clean Air Act
1.2 Building code
1.3 National Electrical and Fire Safety Codes
1.4 Waste management statutes and rules
1.5 Philippine Occupational Safety and Health Standards
1.6 DOLE regulations on safety legal requirements
1.7 ECC regulations
2. Hazards/Risks May include but are not limited to:
2.1 Physical hazards – impact, illumination, pressure, noise,
vibration, temperature, radiation
2.2 Biological hazards- bacteria, viruses, plants, parasites,
mites, molds, fungi, insects
2.3 Chemical hazards – dusts, fibers, mists, fumes, smoke,
gasses, vapors
2.4 Ergonomics
2.4.1 Psychological factors – over exertion/ excessive
force, awkward/static positions, fatigue, direct
pressure, varying metabolic cycles
2.4.2 Physiological factors – monotony, personal
relationship, work out cycle
3. Contingency
measures
May include but are not limited to:
3.1 Evacuation
3.2 Isolation
3.3 Decontamination
3.4 Calling emergency personnel
4. PPE May include but are not limited to:
4.1 Mask
4.2 Gloves
4.3 Goggles
4.4 Hair Net/cap/bonnet
4.5 Face mask/shield
4.6 Ear muffs
4.7 Apron/Gown/coverall/jump suit
4.8 Anti-static suits
________________________________________________________________________________________________
TR – PC OPERATIONS NC II Promulgated ______________ 2005
15
16. VARIABLE RANGE
5. Emergency-related
drills and training
5.1 Fire drill
5.2 Earthquake drill
5.3 Basic life support/CPR
5.4 First aid
5.5 Spillage control
5.6 Decontamination of chemical and toxic
5.7 Disaster preparedness/management
6. OHS personal
records
6.1Medical/Health records
6.2 Incident reports
6.3 Accident reports
6.4 OHS-related training completed
________________________________________________________________________________________________
TR – PC OPERATIONS NC II Promulgated ______________ 2005
16
17. EVIDENCE GUIDE
1. Critical Aspects of
Competency
Assessment requires evidence that the candidate:
1.1 Explained clearly established workplace safety and
hazard control practices and procedures
1.2 Identified hazards/risks in the workplace and its
corresponding indicators in accordance with company
procedures
1.3 Recognized contingency measures during workplace
accidents, fire and other emergencies
1.4 Identified terms of maximum tolerable limits based on
threshold limit value- TLV.
1.5 Followed Occupational Health and Safety (OHS)
procedures for controlling hazards/risks in workplace
1.6 Used Personal Protective Equipment (PPE) in
accordance with company OHS procedures and
practices
1.7 Completed and updated OHS personal records in
accordance with workplace requirements
2. Underpinning
Knowledge and
Attitude
2.1 OHS procedures and practices and regulations
2.2 PPE types and uses
2.3 Personal hygiene practices
2.4 Hazards/risks identification and control
2.5 Threshold Limit Value -TLV
2.6 OHS indicators
2.7 Organization safety and health protocol
2.8 Safety consciousness
2.9 Health consciousness
3. Underpinning
Skills
3.1 Practice of personal hygiene
3.2 Hazards/risks identification and control skills
3.3 Interpersonal skills
3.4 Communication skills
4. Resource
Implications
The following resources must be provided:
4.1 Workplace or assessment location
4.2 OHS personal records
4.3 PPE
4.4 Health records
5. Methods of
Assessment
Competency may be assessed through:
5.1 Portfolio Assessment
5.2 Interview
5.3 Case Study/Situation
6. Context for
Assessment
6.1Competency may be assessed in the work place or in a
simulated work place setting
________________________________________________________________________________________________
TR – PC OPERATIONS NC II Promulgated ______________ 2005
17
18. COMMON COMPETENCIES
UNIT TITLE : APPLY QUALITY STANDARDS
UNIT CODE : 506315202
UNIT DESCRIPTOR : This unit covers the knowledge, skills, attitudes and
values needed to apply quality standards in the
workplace. The unit also includes the application of
relevant safety procedures and regulations, organization
procedures and customer requirements.
ELEMENT
PERFORMANCE CRITERIA
Italicized terms are elaborated in the Range of Variables
1. Assess quality of
received materials
1.1. Work instruction is obtained and work is carried out in
accordance with standard operating procedures.
1.2. Received materials are checked against workplace
standards and specifications.
1.3. Faulty materials related to work are identified and
isolated.
1.4. Faults and any identified causes are recorded and/or
reported to the supervisor concerned in accordance
with workplace procedures.
1.5. Faulty materials are replaced in accordance with
workplace procedures.
2. Assess own work 2.1. Documentation relative to quality within the company
is identified and used.
2.2. Completed work is checked against workplace
standards relevant to the task undertaken.
2.3. Errors are identified and isolated.
2.4. Information on the quality and other indicators of
production performance are recorded in accordance
with workplace procedures.
2.5. In cases of deviations from specific quality
standards, causes are documented and reported in
accordance with the workplace’ s standards operating
procedures.
3. Engage in quality
improvement
3.1. Process improvement procedures are participated in
relative to workplace assignment.
3.2. Work is carried out in accordance with process
improvement procedures.
3.3. Performance of operation or quality of product of
service to ensure customer satisfaction is monitored.
________________________________________________________________________________________________
TR – PC OPERATIONS NC II Promulgated ______________ 2005
18
19. RANGE OF VARIABLES
VARIABLE RANGE
1 Materials 1.1 Materials may include but not limited to:
1.1.1. Manuals
1.1.2. Job orders
1.1.3. Instructional videos
2 Faults 2.1 Faults may include but not limited to:
2.1.1. Materials not to specification
2.1.2. Materials contain incorrect/outdated
information
2.1.3. Hardware defects
2.1.4. Materials that do not conform with any
regulatory agencies
3 Documentation 3.1 Organization work procedures
3.2 Manufacturer’s instruction manual
3.3 Customer requirements
3.4 Forms
4 Errors 4.1 Errors may be related but not limited to the
following:
4.1.1. Deviation from the requirements of the Client
4.1.2. Deviation from the requirement of the
organization
5 Quality standards 5.1 Quality standards may be related but not limited to
the following:
5.1.1. Materials
5.1.2. Hardware
5.1.3. Final product
5.1.4. Production processes
5.1.5. Customer service
6 Customer 6.1 Co-worker
6.2 Supplier/Vendor
6.3 Client
6.4 Organization receiving the product or service
________________________________________________________________________________________________
TR – PC OPERATIONS NC II Promulgated ______________ 2005
19
20. EVIDENCE GUIDE
1 Critical aspects of
competency
Assessment must show that the candidate:
1.1 Carried out work in accordance with the company’s
standard operating procedures
1.2 Performed task according to specifications
1.3 Reported defects detected in accordance with
standard operating procedures
1.4 Carried out work in accordance with the process
improvement procedures
2 Underpinning
knowledge
2.1 Relevant production processes, materials and
products
2.2 Characteristics of materials, software and hardware
used in production processes
2.3 Quality checking procedures
2.4 Workplace procedures
2.5 Safety and environmental aspects of production
processes
2.6 Fault identification and reporting
2.7 Quality improvement processes
3 Underpinning skills 3.1 Reading skills required to interpret work instruction
3.2 Communication skills needed to interpret and apply
defined work procedures
3.3 Carry out work in accordance with OHS policies and
procedures
3.4 Critical thinking
3.5 Solution providing and decision-making
4 Method of
assessment
The assessor must select two of the following to objectively
evaluate the candidate:
4.1 Observation and oral questioning
4.2 Third party report
4.3 Portfolio
4.4 Practical demonstration
5 Resource implication Materials, software and hardware to be used in a real or
simulated situation
6 Context of
Assessment
Assessment may be conducted in the workplace or in a
simulated environment
________________________________________________________________________________________________
TR – PC OPERATIONS NC II Promulgated ______________ 2005
20
21. UNIT TITLE : OPERATE A PERSONAL COMPUTER
UNIT CODE : ICT311201
UNIT DESCRIPTOR : This unit defines the competency required to operate a
personal computer by: starting the PC, logging in, using
and working with files, folders and programs, saving work,
and closing down the PC.
ELEMENT
PERFORMANCE CRITERIA
Italicized terms are elaborated in the Range of Variables
1. Start the
computer
1.1 The peripheral devices are properly connected
1.2 Power is checked and the computer and peripheral devices
are switched on
1.3 Proper logging in and logging off is successfully done
1.4 The operating system features and functions are accessed
and navigated
1.5 Hardware configuration and other system features are
checked
2. Arrange and
customize
desktop display/
Windows settings
2.1 The desktop screen or Windows elements are changed as
needed
2.2 Desktop icons are added, renamed, moved, copied or
deleted
2.3 The online help functions are accessed or used as needed
2.4 Desktop icons of application programs are selected,
opened and closed
2.5 Properties of icons are displayed
2.6 Computer or desktop settings are saved and restored
3. Work with files
and folders (or
directories)
3.1 A file or folder is created, opened, moved, renamed or copied
3.2 Files are located, deleted and restored
3.3 Details and properties of files and folders are displayed or
viewed
3.4 Various files are organized for easy lookup and use
3.5 Files and information are searched
3.6 Disks are checked, erased or formatted as necessary
4. Work with user
application
programs
4.1 Application programs are added, changed, removed or ran
4.2 User software or application program are installed, updated
and upgraded
4.3 Information/data are moved between documents or files
5. Print information 5.1 Printer is added or installed and correct printer settings is
ensured
5.2 Default printer is assigned accordingly
5.3 Information or document is printed on the installed printer
5.4 Progress of print jobs are viewed and deleted as required
6. Shut down
computer
6.1 All open application programs are closed
6.2 Computer and peripheral devices are properly shut down
________________________________________________________________________________________________
TR – PC OPERATIONS NC II Promulgated ______________ 2005
21
22. RANGE OF VARIABLES
VARIABLE RANGE
1. Peripheral
device
This may include but is not limited to:
1.1 mouse
1.2 keyboard
1.3 monitor or visual display unit
1.4 printer
1.5 scanner
2. Computer May include:
2.1 Laptops/notebooks
2.2 Workstations
2.3 Servers
2.4 other personal computer devices
3. Application
programs
Can include:
3.1 user programs
3.2 database programs
3.3 word processors
3.4 email programs
3.5 Internet browsers
3.6 system browsers
3.7 spreadsheets
4. Operating
system
May include but is not limited to the various versions
and variants of:
4.1 Windows
4.2 NT
4.3 Mac OS
4.4 Linux
4.5 Solaris
4.6 Unix
5. System features May include but is not limited to the operating system
features and hardware features like:
5.1 memory size
5.2 disk capacities
5.3 video cards
5.4 USBs
5.5 Modems
5.6 1394 and LAN connectors
5.7 SD and PC cards
5.8 wireless and infrared connections.
________________________________________________________________________________________________
TR – PC OPERATIONS NC II Promulgated ______________ 2005
22
23. VARIABLE RANGE
6. Online help
functions
6.1 An instruction manual, or a portion of the manual,
integrated and accessible from within the program or
software being used.
7. Properties Indicates the description of the file or folder to include
the:
7.1 file name
7.2 type of file
7.3 file size
7.4 date created and modified
7.5 attributes (hidden, read-only).
8. Various files 8.1 Documents
8.2 Records
8.3 Pictures
8.4 Music
8.5 Video
9. Disks May include but is not limited to:
9.1 Floppy disks
9.2 CDs
9.3 CD-RW (Compact discs-Read/Write)
9.4 DVD RW
9.5 zip disks
9.6 flash drives
9.7 memory sticks
9.8 hard drives
10. Printer settings The properties of the printer that enables it to work
includes:
10.1 page layout
10.2 paper size
10.3 ink/cartridge type
10.4 number of copies
10.5 page orientation.
________________________________________________________________________________________________
TR – PC OPERATIONS NC II Promulgated ______________ 2005
23
24. EVIDENCE GUIDE
1. Critical
aspects of
Competency
1.1 Assessment must confirm the ability to utilize software,
navigate the desktop, using system features to perform
tasks and save results of work.
2. Underpinning
Knowledge
Knowledge includes:
2.1 Keyboard layout and functions
2.2 Computer functions
2.3 Basic parts of a computer and various hardware
components
2.4 Storage devices and file concepts
2.5 Basic software operation and functionalities
3. Underpinning
Skills
Skills include:
3.1 Saving and retrieving files to and from various folders or
disk storage
3.2 Mouse and keyboarding skills for running software
applications
3.3 Reading and writing at a level where basic workplace
documents are understood
3.4 Clear ability to communicate with peers and supervisors
3.5 Interpretation of user manuals and help functions
3.6 The ability to carry out written and verbal instructions
using a personal computer whether standalone or in a
networked environment
4. Resource
Implications
To demonstrate competence in this unit access to the
following resources will be required:
4.1 A personal computer
4.2 A printer
4.3 Mouse and keyboard
4.4 Basic systems software
5. Methods of
Assessment
Competency may be assessed through:
5.1 Observation in a workplace or simulated environment
5.2 Third party reports
5.3 Exams and tests
5.4 Demonstration of required skills
5.5 Interviews
6. Context for
Assessment
6.1 Competency may be assessed in the workplace or in a
simulated work environment.
________________________________________________________________________________________________
TR – PC OPERATIONS NC II Promulgated ______________ 2005
24
25. CORE COMPETENCIES
UNIT TITLE : OPERATE A WORD PROCESSING APPLICATION
UNIT CODE : ICT 313324
DESCRIPTION : This unit defines the competency required to properly
perform basic typing operations using a word processing
application. This may include creating and formatting
documents, creating tables, printing labels, and mail merge.
ELEMENT
PERFORMANCE CRITERIA
Italicized terms are elaborated in the Range of Variables
1. Create documents 1.1. Documents are created or opened and data added
according to information requirements
1.2. Document templates are used as required
1.3. Document is typed, edited and navigated
1.4. Document is saved to correct folder or directory
2. Format document
according to user
requirements
2.1. Characters and paragraphs are formatted and
styled using font size, type and color, numbered
and bulleted lists, borders, text boxes and shading
as required
2.2. Spelling and grammar are checked
3. Change page
appearance and
layout
3.1. Margins, page size and orientation are changed
3.2. Page breaks, section breaks and page numbers are
inserted
3.3. Headers and footers are placed
3.4. Footnotes, cross-references and bookmarks are
done
3.5. Table of contents are created
3.6. Document is saved in another file format
4. Create and format
tables
4.1. Table is inserted or copied into a document
4.2. Table cells, columns and rows are created, edited
and formatted to meet information requirements
5. Add image 5.1. Appropriate images are inserted in a document.
5.2. Images are positioned, cropped, and resized to
meet the document formatting needs
6. Mail merge and print
word processing
documents
6.1. Mail merge is used to create form letters, mailing
labels and other merged documents
6.2. Appropriate print settings are selected
6.3. Documents are previewed and printed
________________________________________________________________________________________________
TR – PC OPERATIONS NC II Promulgated ______________ 2005
25
26. RANGE OF VARIABLES
VARIABLE RANGE
1. Information
requirements
This can include:
1.1 Memos
1.2 Letters
1.3 Minutes
1.4 agendas
1.5 any other business documentation required by the
organization or user.
2. File Format May include but is not limited to:
2.1 html pages
2.2 pdf files
2.3 text files
2.4 Word
2.5 Wordperfect
2.6 Macintosh
2.7 RTF
2.8 DOS files
3. Images This may be but is not limited to:
3.1 graphics
3.2 clipart or pictures
4. Printer settings The properties of the printer that enable it to work
include:
4.1 Layout
4.2 paper size
4.3 ink/cartridge type
4.4 number of copies
4.5 orientation
4.6 sides
________________________________________________________________________________________________
TR – PC OPERATIONS NC II Promulgated ______________ 2005
26
27. EVIDENCE GUIDE
1. Critical
aspects of
Competency
1.1 Assessment must ensure the ability to create, open
and retrieve documents, customize basic settings,
format documents, create tables, add objects and
images, save and print documents.
2. Underpinning
Knowledge
Knowledge includes:
2.1 Organizational benchmarks for minimum typing skills
including speed and accuracy
2.2 Creating and opening documents
2.3 Formatting documents
2.4 Inserting tables, and images
2.5 Saving, printing and closing documents
3. Underpinning
Skills
Skills include:
3.1 Basic analysis in relation to a limited range of routine
areas
3.2 Low level decision making in relation to a limited range
of routine areas
3.3 Problem solving skills in known areas during normal
routine
3.4 Reading and writing at a level where basic workplace
documents are understood
3.5 Clear and precise communication
3.6 Interpretation of user manuals and help functions
4. Resource
Implications
To demonstrate competence in this unit access to the
following resources will be required:
4.1 Word processing software
4.2 Documents detailing Organizational style guide/policy
5. Method of
Assessment
Assessment may include but not limited to:
5.1 Observation of the candidate performing the work
using actual or test data, work processes and
procedures
5.2 Questioning on underpinning knowledge and skills
5.3 Demonstration of skills
5.4 Inspection and review of sample work outputs and / or
workplace documentation
6. Context of
Assessment
6.1 Assessment may be conducted either in the workplace
or in a simulated environment.
________________________________________________________________________________________________
TR – PC OPERATIONS NC II Promulgated ______________ 2005
27
28. UNIT TITLE : OPERATE EMAIL AND SEARCH THE WEB USING
BROWSERS
UNIT CODE : ICT 313327
DESCRIPTION : This unit defines the competency required to complete basic
Internet search tasks as well as send and receive E-mails
with attachments.
ELEMENT
PERFORMANCE CRITERIA
Italicized terms are elaborated in the Range of Variables
1. Access the Internet 1.1. Internet browser is opened and a Home page of
personal choice is set using Internet options
1.2. The display of the Internet browser is adjusted to
suit personal requirements
1.3. Toolbar is modified to meet user and Internet
browser needs
1.4. A particular site is accessed and data is retrieved
1.5. Uniform Resource Locator (URL ) is entered in the
address line of the internet browser
2. Search the Internet 2.1. Appropriate search engine is located and selected
with search expressions defined based on the data
required
2.2. Search expression results are saved and presented
in a report, according to the information
requirements
2.3. A bookmark is created within the Internet browser
or a link for the required Internet page and saved in
a bookmark folder
2.4. The Internet browser options are modified for
printing a web page
2.5. The Internet browser is closed
________________________________________________________________________________________________
TR – PC OPERATIONS NC II Promulgated ______________ 2005
28
29. ELEMENT
PERFORMANCE CRITERIA
Italicized terms are elaborated in the Range of Variables
3. Send and organize
messages
3.1. E-mail software is used to create and open an e-
mail account.
3.2. An e-mail message is composed and text added
3.3. An e-mail message is composed according to
organizational guidelines.
3.4. An automatic signature for the user was created, so
that it appears automatically in every new e-mail
message that the user creates
3.5. Files are attached to the e-mail message, using the
attachment feature
3.6. A priority is set or assigned to an e-mail message;
spelling is checked and text edited as required
3.7. The e-mail message is sent
3.8. Received messages are answered and forwarded
as appropriate, using the carbon copy and forward
features
3.9. Attachments are opened and saved to the relevant
folder
3.10. An e-mail message is searched and a priority set or
deleted as necessary
3.11. Inbox is sorted according to sender’s name or date
received
3.12. E-mail messages are saved in a folder.
4. Create an address
book
4.1. E-mail address is added to the e-mail package
address book
4.2. The address book is updated by transferring the e-
mail address from a received message
4.3. Distribution list is created and e-mail message are
sent
________________________________________________________________________________________________
TR – PC OPERATIONS NC II Promulgated ______________ 2005
29
30. RANGE OF VARIABLES
VARIABLE RANGE
1. Internet
browser
May include but is not limited to:
1.1 Netscape Navigator
1.2 Internet Explorer
1.3 Mozilla
1.4 Opera
1.5 other browsers
2. Internet
options
Internet options include but are not limited to the
configuring of the following options:
2.1 home page
2.2 location of temporary files
2.3 privacy level
2.4 security level
2.5 type of connection
2.6 history
3. Toolbar Toolbars can contain:
3.1 Buttons
3.2 menus
3.3 or a combination of both
4. Search engine 4.1 A website that allows the entry of a search parameter
and based on the request, searches through its list of
websites for the best match. It then displays the
results for selection.
4.2 A wide variety of search tools may be used. A
selection of tools includes:
4.2.1. Snap
4.2.2. Questfinder
4.2.3. Ask Jeeves
4.2.4. Google
4.2.5. Metacrawler
4.2.6. Alta Vista
4.2.7. Excite
4.2.8. Infoseek
4.2.9. Findlink
4.2.10. Northern Light
4.2.11. AOL Netfind
4.2.12. Hotbot
4.2.13. LookSmart
4.2.14. Yahoo
4.2.15. Netscape
4.2.16. Lycos
4.2.17. Open Text
4.2.18. WebCrawler
________________________________________________________________________________________________
TR – PC OPERATIONS NC II Promulgated ______________ 2005
30
31. VARIABLE RANGE
4.2.1. Go To Dot Com
4.2.2. Beaucoup
4.2.3. Meta Search
4.2.4. Search.com
4.2.5. Go2Network
4.2.6. Savvy Search
4.2.7. Profusion
4.2.8. Dogpile
4.2.9. Metagopher
5. Organizational
guidelines
May include but are not limited to:
5.1 personal use of E-mails and internet access
5.2 content of E-mails
5.3 downloading information and accessing particular
Internet sites
5.4 opening mail with attachments
5.5 security measures and virus risks
6. Files May include but is not limited to:
6.1 html pages
6.2 pdf files
6.3 text files
6.4 pictures
6.5 music
6.6 e-mail messages
________________________________________________________________________________________________
TR – PC OPERATIONS NC II Promulgated ______________ 2005
31
32. EVIDENCE GUIDE
1. Critical
aspects of
Competency
Assessment must confirm the ability to:
1.1 browse the Internet
1.2 search for information
1.3 send and receive E-mails
1.4 organize the E-mail client application on the computer.
2. Underpinning
Knowledge
Knowledge includes:
2.1 Makeup and structure of Internet addresses
2.2 Basic technical terminology in relation to reading help
files and prompts
2.3 Logging-on procedures relating to accessing a PC
2.4 Modem speed, traffic loads in relation to times of
accessing the internet
2.5 Evaluating and assessing the authority, reliability and
authenticity of information
2.6 Organizational guidelines on internet and email usage,
(“netiquette”)
2.7 Different types of search engines
2.8 The different types of messages that occur (error
messages, updates, the need for installing plug-ins, etc)
3. Underpinning
Skills
Skills include:
3.1 Ability to implement workstation adjustment according to
OH&S guidelines
3.2 Basic analysis in relation to a limited range of routine
tasks
3.3 Low-level decision-making in relation to a limited range
of routine tasks
3.4 Problem-solving skills in known areas during normal
routine activities
3.5 Reading and writing at a level where basic workplace
documents are understood
3.6 Clear and precise communication
3.7 Ability to interpret user manuals
3.8 Cultural understanding
4. Resource
Implications
To demonstrate this unit of competence, the following
resources will be required:
4.1 PC or workstation with Internet connectivity
4.2 Organizational style guide/policy
4.3 Organizational policies on Internet and e-mail usage
5. Method of
Assessment
Assessment will usually include:
5.1 Observation of the candidate performing the work using
actual Internet connection and email access.
5.2 Questioning on underpinning knowledge and skills
5.3 Demonstration of skills
6. Context of
Assessment
6.1 Assessment may be conducted either in the workplace
________________________________________________________________________________________________
TR – PC OPERATIONS NC II Promulgated ______________ 2005
32
33. or in any workstation or PC with Internet connection.
________________________________________________________________________________________________
TR – PC OPERATIONS NC II Promulgated ______________ 2005
33
34. UNIT TITLE : OPERATE A SPREADSHEET APPLICATION
UNIT CODE : ICT 313325
DESCRIPTION : This unit defines the competency required to correctly
operate spreadsheet applications and perform basic
worksheet and computational operations.
ELEMENT
PERFORMANCE CRITERIA
Italicized terms are elaborated in the Range of Variables
1. Create and save
worksheets
1.1. Numbers, text and data are entered into worksheet
cells and edited as required
1.2. Formulas are created, used and corrected as
needed
1.3. Cells, columns and rows are adjusted and
formatted as needed.
1.4. Workbook or file is opened, closed or saved to the
correct directory, folder and disk
2. Customize basic
settings
2.1. Adjust page layout to meet user requirements
and/or special needs
2.2. Different toolbars are opened and viewed
2.3. Font settings are changed so they are appropriate
for the purpose of the document
2.4. Cells are formatted to display different styles as
required
2.5. Margins are modified to suit the purpose of the
worksheet
2.6. Multiple worksheets are prepared and viewed
3. Format worksheet 3.1. Text and cells are formatted as required
3.2. Border, shading and background patterns are
applied
3.3. Styles and built-in formats are used
4. Incorporate objects
and charts in
worksheets
4.1. Object is imported and manipulated
4.2. Charts are created, formatted and changed based
on data and text in the worksheet
4.3. Selected data is displayed in a different chart
5. Print worksheets 5.1. The print area of a worksheet is selected, set or
cleared
5.2. The worksheet or part of the worksheet is
previewed and printed on the installed printer
5.3. Headers and footers are inserted
5.4. The worksheet output is submitted to the
appropriate person for approval or feedback
________________________________________________________________________________________________
TR – PC OPERATIONS NC II Promulgated ______________ 2005
34
35. RANGE OF VARIABLES
VARIABLE RANGE
1. Edit This can include but is not limited to the following
functions:
1.1 Add
1.2 Select
1.3 Copy
1.4 Paste
1.5 Delete
1.6 Move
1.7 undo and repeat last action.
2. Data 2.1 Can be text, numbers, date or symbols added to the
worksheet or document
3. Toolbars 3.1 Toolbars can contain buttons, menus, or a
combination of both.
4. Font Settings 4.1 These can include: font type, size, appearance and
color.
5. Format 5.1 Can include: changing font size and color; italics, bold,
underline; align left, centered, right or justified
6. Formula May include simple arithmetic and trigonometric
functions like:
6.1 Additions
6.2 Subtractions
6.3 Multiplication
6.4 Division
6.5 SIN, COS, and TAN functions
7. Disk May include but are not limited to:
7.1 Floppy disks
7.2 CDs
7.3 CD-RW (Compact Discs-Read Write)
7.4 DVD RW
7.5 zip disks
7.6 hard drives
8. Object Any item that can be inserted into the worksheet, such
as:
8.1 Documents
8.2 Pictures
8.3 sound
9. Appropriate
person
This can include a:
9.1 Supervisor
9.2 Teacher
9.3 authorized business representative or client.
________________________________________________________________________________________________
TR – PC OPERATIONS NC II Promulgated ______________ 2005
35
37. EVIDENCE GUIDE
1. Critical
aspects of
evidence
1.1 Assessment must ensure learners have the ability to
complete basic operations associated with creating,
formatting, saving and printing a spreadsheet,
including creating basic formulas and working with
objects and charts
2. Underpinning
Knowledge
Knowledge includes:
2.1 Logging in procedures relating to accessing a PC
2.2 Basic mathematics
2.3 Basic technical terminology in relation to reading help
files and prompts
3. Underpinning
Skills
Skills include:
3.1 Low level decision making in relation to creating and
manipulating spreadsheet data
3.2 Reading and writing at a level where basic workplace
documents are understood
3.3 Clear and precise communication
3.4 Interpretation of user manuals
4. Resource
Implications
To demonstrate this unit of competence, the
following resources will be required:
4.1 Spreadsheet software on a PC or workstation
4.2 Organizational style guide/policy
5. Method of
Assessment
Assessment may include but not limited to:
5.1 Observation of the candidate performing the work
using actual or test data, work processes and
procedures
5.2 Questioning on underpinning knowledge and skills
5.3 Demonstration of skills
5.4 Inspection and review of sample work outputs and / or
workplace documentation.
6. Context of
Assessment
6.1 Assessment may be conducted either in the workplace
or in a simulated environment
TR - PC OPERATIONS NC II 37
38. UNIT TITLE : OPERATE A PRESENTATION PACKAGE
UNIT CODE : ICT 313326
DESCRIPTION : This unit defines the competency required to operate
presentation applications and perform basic operations.
ELEMENT
PERFORMANCE CRITERIA
Italicized terms are elaborated in the Range of Variables
1. Create
presentations
1.1. A simple design is created according to
organizational requirements
1.2. Text and symbols are added to a blank
presentation
1.3. Presentation templates and slides are used to
create a presentation
1.4. Various formatting tools are used to improve the
look of the presentation
1.5. Presentations are saved in correct folder
2. Customize basic
settings
2.1. Display is adjusted to meet user requirements
2.2. Different toolbars are opened and viewed to
select options
2.3. Font settings are appropriate for the purpose of
the presentation
2.4. Appropriate slide layout, color schemes,
background and design templates are selected
3. Format
presentation
3.1. Charts, graphs, bulleted lists are used and
modified as required
3.2. Objects are inserted/imported and manipulated to
meet presentation requirements
3.3. Slide layouts are modified including text and
colors to meet presentation requirements
3.4. Formatting tools are used as required
3.5. Slides are added, deleted, duplicated and
rearranged to suit presentation needs
3.6. Presentation is closed and saved to disk and/or in
another format
________________________________________________________________________________________________
TR – PC OPERATIONS NC II Promulgated ______________ 2005
38
39. ELEMENT
PERFORMANCE CRITERIA
Italicized terms are elaborated in the Range of Variables
4. Add slide show
effects
4.1. Animation and multimedia effects are incorporated
into presentation to enhance the presentation
4.2. Slide transition effects are added to ensure smooth
progression though the presentation
4.3. Presentation is tested for correct sequence and
overall impact
4.4. Onscreen navigation tools are used to start and
stop slide show or move between different slides
5. Print presentation
and notes
5.1. Appropriate print format is selected
5.2. Preferred slide orientation and various notes,
handouts and color options are selected before
printing
5.3. Slides are previewed and spell checked
5.4. Selected slides, notes and handouts are printed
and submitted to appropriate person for feedback
________________________________________________________________________________________________
TR – PC OPERATIONS NC II Promulgated ______________ 2005
39
40. RANGE OF VARIABLES
VARIABLE RANGE
1. Font setting These can include:
1.1 Type
1.2 Size
1.3 color
2. Objects Any item that can be inserted into the spreadsheet, such
as:
2.1 other documents
2.2 pictures
2.3 tables
2.4 sound
3. Formatting tools Menu commands within the application, such as:
3.1 Help
3.2 search and replace
3.3 spell check
3.4 undo
3.5 cut
3.6 copy
3.7 paste
4. Format Saving the presentation as another type of document,
such as:
4.1 Html
4.2 Bitmap
4.3 JPEG
4.4 comma separated values or text.
5. Disk May include but are not limited to:
5.1 Floppy disks
5.2 CDs
5.3 CD-RW (Compact Discs-Read Write)
5.4 DVD RW
5.5 zip disks
5.6 hard drives.
6. Print format 6.1 The way, in which the presentation will be printed,
including layout, quality, and number of copies, color or
black and white.
7. Appropriate
person
This can include a:
7.1 Supervisor
7.2 Teacher
7.3 authorized business representative or client.
8. User
requirements
8.1 How the user wants an application, desktop, computer,
or document to appear
9. Toolbars 9.1 Toolbars can contain buttons, menus, or a combination
________________________________________________________________________________________________
TR – PC OPERATIONS NC II Promulgated ______________ 2005
40
42. EVIDENCE GUIDE
1. Critical aspects
of Competency
1.1 Assessment must ensure students can create, format
and prepare presentations for distribution and display.
2. Underpinning
Knowledge
Knowledge includes:
2.1 Basic technical terminology in relation to reading help
files and prompts
2.2 Organizational benchmarks for keyboarding
2.3 Different types of presentations, formal, informal,
audience types
2.4 Presentation pitfalls
3. Underpinning
Skills
Skills include:
3.1 Reading and writing at a level where basic workplace
documents are understood
3.2 Clear and precise communication
3.3 Interpretation of user manuals
3.4 Low level decision making in relation to creating an
electronic presentation
4. Resource
Implications
To demonstrate this unit of competence, the
following resources will be required:
4.1 Organizational style guide/policy
4.2 Presentation software and HW platform
5. Method of
Assessment
Assessment will usually include:
5.1 Observation of the candidate performing the work
using actual or test data, work processes and
procedures
5.2 Questioning on underpinning knowledge and skills
5.3 Demonstration of skills
5.4 Inspection and review of sample work outputs and / or
workplace documentation.
6. Context of
Assessment
6.1 Assessment may be conducted either in the workplace
or in a simulated environment
________________________________________________________________________________________________
TR – PC OPERATIONS NC II Promulgated ______________ 2005
42
43. SECTION 3 TRAINING STANDARDS
These standards are set to provide technical and vocational education and
training (TVET) providers with information and other important requirements to
consider when designing training programs for certain qualifications.
They include information on curriculum design; training delivery; trainee entry
requirements; tools and equipment; training facilities; and trainer’s qualification.
3.1 CURRICULUM DESIGN
The Curriculum design for TVET shall be outcome-based indicating the
competencies that learners are expected to demonstrate after course delivery.
The design should show a plan incorporating a structured series of intended
learning outcomes and associated learning experiences (i.e. the objectives,
structure, content, assessment and sequencing of what has to be learned,
generally organized as related combinations or series of modules and
elements).
The design shall be based on the national qualifications as promulgated
by TESDA. The package of qualification is a collection of units of competency
meeting certain job roles that are meaningful in the workplace. The design of
the curriculum shall include the following components: Course title, Nominal
Duration of the Course, Qualification Level, Course Description, Learning
Outcomes, Delivery Modes, Assessment Approaches and Resources. Details
in the preparation of the competency-based curriculum can be found in the
TESDA Competency-based Curriculum (CBC) User’s Guide.
TESDA shall come up with design exemplars of competency-based
curricula but institutions may also develop their own curricula provided the
components mentioned above are included.
3.2 TRAINING DELIVERY
The delivery of training shall adhere to the design of the curriculum.
Delivery shall be guided by the 10 basic principles of competency-based
TVET.
• The training is based on curriculum developed from the competency
standards;
• Learning is modular in its structure;
________________________________________________________________________________________________
TR – PC OPERATIONS NC II Promulgated ______________ 2005
43
44. • Training delivery is learner-centered and should accommodate
individualized and self-paced learning strategies;
• Training is based on work that must be performed;
• Training materials are directly related to the competency standards
and the curriculum modules;
• Assessment is based in the collection of evidence of the
performance of work to the industry required standard;
• Training program allows for recognition of prior learning (RPL) or
current competencies;
• Training allows for multiple entry and exit; and
• Training programs are registered with the UTPRAS.
The competency-based TVET system recognizes various types of
delivery modes, both on and off-the-job as long as the learning is driven by the
competency standards specified by the industry. The following training
modalities may be adopted when designing training programs:
• The dualized mode of training delivery is preferred and
recommended. Thus programs would contain both in - school and
in-industry training or fieldwork components. Details can be referred
to the Dual Training System (DTS) Implementing Rules and
Regulations.
• Modular/self-paced learning is a competency-based training
modality wherein the trainee is allowed to progress at his own pace.
The trainer just facilitates the training delivery.
• Peer teaching/mentoring is a training modality wherein fast learners
are given the opportunity to assist the slow learners.
• Supervised industry training or on-the-job training is an approach in
training designed to enhance the knowledge and skills of the trainee
through actual experience in the workplace to acquire specific
competencies prescribed in the training regulations.
• Distance learning is a formal education process in which majority of
the instruction occurs when the students and instructor are not in the
same place. Distance learning may employ correspondence study,
or audio, video or computer technologies.
• Project-based instruction is an authentic instructional model or
strategy in which students plan, implement and evaluate projects
that have real world applications.
________________________________________________________________________________________________
TR – PC OPERATIONS NC II Promulgated ______________ 2005
44
45. 3.3 TOOLS AND EQUIPMENT
The quantity of tools and equipment to be used for the conduct of
training for this qualification shall depend on the number of students, size of
the class, and/or modality of training. The most important consideration is to
make sure that tools and equipment are adequately provided to all trainees
when needed. The actual list of tools, equipment, machines, supplies and
other materials to be used shall be identified and detailed in the Competency
Based Curriculum (CBC) to be submitted by the TVET provider when
registering a course or training program with TESDA.
Due to the fast-changing nature of the Information and Communications
Technology (ICT) sector, TVET providers are reminded to use and provide
their trainees with the latest technology tools, equipment and materials where
appropriate and applicable.
In cases where there are specialized tools, equipment and facilities that
are not generally considered standard requirements or not absolute requisites
for training, the industry working group or TESDA may provide guidelines or
specific advice on such matters.
3.4 TRAINING FACILITIES
The workshop or training for any course is dictated by three important
factors:
(a) the nature and type of course to be conducted;
(b) the number of trainees and
(c) the type and size of equipment and machines to be installed or used.
Appropriate consideration should be given in providing and allocating
work space, communications facilities, and the usual workplace amenities to
ensure a proper learning environment. Where applicable, training shall be held
or conducted in learning facilities in accordance with generally accepted
industry standards and practice.
________________________________________________________________________________________________
TR – PC OPERATIONS NC II Promulgated ______________ 2005
45
46. 3.5 TRAINERS’ QUALIFICATION
There are Qualification Levels I to IV, from Trainer I to Mentor/Master
Trainer defined and designated by TESDA. Each qualification level is a
combination of competencies in Technology and Methodology / Professional
streams. The technology levels follow the PTQF, a system of assessment and
certification for workers. A Trainer shall have National Certificate higher than
or equal to the qualification level of the trade he/she is teaching.
3.6 INSTITUTIONAL ASSESSMENT
Institutional Assessment is undertaken by trainees to determine their
achievement of units of competency. A certificate of achievement is issued for
each unit of competency. The institutional assessment is administered by the
trainer/assessor.
________________________________________________________________________________________________
TR – PC OPERATIONS NC II Promulgated ______________ 2005
46
47. SECTION 4 NATIONAL ASSESSMENT AND CERTIFICATION
ARRANGEMENTS
4.1 To attain the National Qualification of PC Operations NC II, the candidate must
demonstrate competence in all the units through project-type assessment
covering all the units listed in Section 1. Successful candidates shall be
awarded a National Certificate signed by the TESDA Director General.
4.2 Individuals aspiring to be awarded the qualification of PC Operations NC II
must acquire Certificate of Competency in all the following individual core units
of the Qualification. Candidates may apply for assessment in any accredited
assessment center.
4.2.1 Operate word-processing application
4.2.2 Operate spreadsheet application
4.2.3 Operate presentation package
4.2.4 Operate e-mail and search web using browsers
Successful candidates shall be awarded Certificates of Competency
(COC).
4.3 Upon accumulation and submission of all COCs acquired for the relevant units
of competency comprising this qualification, an individual shall be issued the
corresponding National Certificate.
4.4 Assessment shall focus on the core units of competency. The basic and
common units shall be integrated or assessed concurrently with the core units.
4.5 The following are qualified to apply for assessment and certification:
4.5.1 Graduates of formal, non-formal and informal including enterprise-
based training programs.
4.5.2 Experienced workers (wage employed or self employed)
4.6 The guidelines on assessment and certification are discussed in detail in the
"Procedures Manual on Assessment and Certification" and "Guidelines on the
Implementation of the Philippine TVET Qualification and Certification System
(PTOQS)".
________________________________________________________________________________________________
TR – PC OPERATIONS NC II Promulgated ______________ 2005
47
48. DEFINITION OF TERMS
GENERAL
1) Certification - is the process of verifying and validating the competencies of a
person through assessment
2) Certificate of Competency (COC) – is a certification issued to individuals
who pass the assessment for a single unit or cluster of units of competency
3) Common Competencies - are the skills and knowledge needed by all
people working in a particular industry
4) Competency - is the possession and application of knowledge, skills and
attitudes to perform work activities to the standard expected in the workplace
5) Competency Assessment - is the process of collecting evidence and making
judgements on whether competency has been achieved
6) Competency Standard (CS) - is the industry-determined specification of
competencies required for effective work performance
7) Context of Assessment - refers to the place where assessment is to be
conducted or carried out
8) Core Competencies - are the specific skills and knowledge needed in a
particular area of work - industry sector/occupation/job role
9) Critical aspects of competency - refers to the evidence that is essential for
successful performance of the unit of competency
10) Elective Competencies - are the additional skills and knowledge required
by the individual or enterprise for work
11) Elements - are the building blocks of a unit of competency. They describe in
outcome terms the functions that a person perform in the workplace
12) Evidence Guide - is a component of the unit of competency that defines or
identifies the evidences required to determine the competence of the
individual. It provides information on critical aspects of competency,
underpinning knowledge, underpinning skills, resource implications,
assessment method and context of assessment
13) Level - refers to the category of skills and knowledge required to do a job
14) Method of Assessment - refers to the ways of collecting evidence and when
evidence should be collected
15) National Certificate (NC) – is a certification issued to individuals who
achieve all the required units of competency for a national qualification
defined under the Training Regulations. NCs are aligned to specific levels
within the PTQF
________________________________________________________________________________________________
TR – PC OPERATIONS NC II Promulgated ______________ 2005
48
49. 16) Performance Criteria - are evaluative statements that specify what is to be
assessed and the required level of performance
17) Qualification - is a cluster of units of competencies that meets job roles and
are significant in the workplace. It is also a certification awarded to a person
on successful completion of a course in recognition of having demonstrated
competencies in an industry sector
18) Range of Variables - describes the circumstances or context in which the
work is to be performed
19) Recognition of Prior Learning (RPL) – is the acknowledgement of an
individual’s skills, knowledge and attitudes gained from life and work
experiences outside registered training programs
20) Resource Implications - refers to the resources needed for the successful
performance of the work activity described in the unit of competency. It
includes work environment and conditions, materials, tools and equipment
21) Tool Competencies - are the skills and knowledge that everyone needs for
work
22) Training Regulations (TR) – refers to the document promulgated and issued
by TESDA consisting of competency standards, national qualifications and
training guidelines for specific sectors/occupations. The TR serve as basis
for establishment of qualification and certification under the PTQF. It also
serves as guide for development of competency-based curricula and
instructional materials including registration of TVET programs offered by
TVET providers
23) Underpinning Knowledge - refers to the competency that involves in
applying knowledge to perform work activities. It includes specific
knowledge that is essential to the performance of the competency
24) Underpinning Skills - refers to the list of the skills needed to achieve the
elements and performance criteria in the unit of competency. It includes
generic and industry specific skills
25) Unit of Competency – is a component of the competency standards stating
a specific key function or role in a particular job or occupation; it is the
smallest component of achievement that can be assessed and certified
under the PTQF
________________________________________________________________________________________________
TR – PC OPERATIONS NC II Promulgated ______________ 2005
49