Topic6b
•
0 likes•217 views
The document discusses the evolution of switching system technology from manual switches to stored program control, and introduces customer switching systems which include private automatic branch exchanges, small business systems, and automatic call distributors to connect users to the public switched telephone network or other customer switching systems.
Report
Share
Report
Share
Download to read offline
Recommended
Telecommunication switching system
This document discusses simple telephone communication systems and their components. It describes how a carbon microphone works as an amplitude modulator to transmit sound signals along the line. An inductor allows DC current to flow while acting as a high impedance element for voice signals. At the receiver, an electromagnet converts the electrical signals back into sound waves. Early telephone systems used half duplex communication and included sidetone circuits to allow users to hear themselves. The document also covers the components and operation of local battery and central battery telephone exchanges.
7.4.6 slip
This document describes how to calculate the rotor frequency of a two-pole, 50 Hz induction motor given the rotor speed of 2850 rpm. It shows that the slip speed is 3000 rpm, the slip percentage is 5%, and using the formula fs x %slip / 100, the rotor frequency is calculated to be 2.5 Hz.
4.2.1 Better Load
The document describes the circuits and loads for an electrical installation. It lists 19 circuits with various lighting, power outlet, motor, and appliance loads. It calculates the demand current in amps for each phase based on adding the full load or percentage of full load for each circuit based on rating and number of devices. The highest calculated demand is 153.25 amps on phase L2. With a 10% allowance for future additions, the total recommended maximum current is 168.575 amps.
4.1.13 Light Demand 3
This short document does not provide any substantive information to summarize in 3 sentences or less. It only notes that an explanation is not contained in a workbook, but provides no other context or details.
4.1.12 Light Demand 2 Table Part2
The document outlines the demand calculations for 19 different circuit load groups across 3 phases. It lists the load description, current allowance calculation method, and resulting demand current for each phase. The total demand current per phase is calculated at the bottom, with values of 143.8 amps for phase 1, 153.25 amps for phase 2, and 145.05 amps for phase 3.
4.1.11 Light Demand 2 Table
The document contains a table that calculates the current demand per phase for various circuit load groups in an electrical system. It lists 19 load groups categorized by letters A through D, describing each load. It shows the current allowance calculation method and resulting demand in amps for each phase. The total demand current calculated per phase is 143.8 amps for L1, 153.25 amps for L2, and 145.05 amps for L3.
4.1.10 Light Demand 2
This 3 sentence document provides instructions to refer to a specific table on a specific page of a particular standard for additional explanatory information not contained in the current workbook. The instructions direct the reader to Table C2 on page 359 of AS/NZA 3000:2007 for an explanation that is not included in the current document.
4.1.9 Light Demand 1
The document describes the functions of 19 electrical circuits in a building. It lists the types of equipment connected to each circuit such as fluorescent lighting, outlets, motors, and appliances. It also indicates which of the 3 electrical phases (L1, L2, L3) each circuit is connected to.
Recommended
Telecommunication switching system
This document discusses simple telephone communication systems and their components. It describes how a carbon microphone works as an amplitude modulator to transmit sound signals along the line. An inductor allows DC current to flow while acting as a high impedance element for voice signals. At the receiver, an electromagnet converts the electrical signals back into sound waves. Early telephone systems used half duplex communication and included sidetone circuits to allow users to hear themselves. The document also covers the components and operation of local battery and central battery telephone exchanges.
7.4.6 slip
This document describes how to calculate the rotor frequency of a two-pole, 50 Hz induction motor given the rotor speed of 2850 rpm. It shows that the slip speed is 3000 rpm, the slip percentage is 5%, and using the formula fs x %slip / 100, the rotor frequency is calculated to be 2.5 Hz.
4.2.1 Better Load
The document describes the circuits and loads for an electrical installation. It lists 19 circuits with various lighting, power outlet, motor, and appliance loads. It calculates the demand current in amps for each phase based on adding the full load or percentage of full load for each circuit based on rating and number of devices. The highest calculated demand is 153.25 amps on phase L2. With a 10% allowance for future additions, the total recommended maximum current is 168.575 amps.
4.1.13 Light Demand 3
This short document does not provide any substantive information to summarize in 3 sentences or less. It only notes that an explanation is not contained in a workbook, but provides no other context or details.
4.1.12 Light Demand 2 Table Part2
The document outlines the demand calculations for 19 different circuit load groups across 3 phases. It lists the load description, current allowance calculation method, and resulting demand current for each phase. The total demand current per phase is calculated at the bottom, with values of 143.8 amps for phase 1, 153.25 amps for phase 2, and 145.05 amps for phase 3.
4.1.11 Light Demand 2 Table
The document contains a table that calculates the current demand per phase for various circuit load groups in an electrical system. It lists 19 load groups categorized by letters A through D, describing each load. It shows the current allowance calculation method and resulting demand in amps for each phase. The total demand current calculated per phase is 143.8 amps for L1, 153.25 amps for L2, and 145.05 amps for L3.
4.1.10 Light Demand 2
This 3 sentence document provides instructions to refer to a specific table on a specific page of a particular standard for additional explanatory information not contained in the current workbook. The instructions direct the reader to Table C2 on page 359 of AS/NZA 3000:2007 for an explanation that is not included in the current document.
4.1.9 Light Demand 1
The document describes the functions of 19 electrical circuits in a building. It lists the types of equipment connected to each circuit such as fluorescent lighting, outlets, motors, and appliances. It also indicates which of the 3 electrical phases (L1, L2, L3) each circuit is connected to.
4.1.7 Example Domestic 3
The document calculates the electrical load of communal services in an apartment building. It shows that 24 lighting points will draw 240 watts and 6 10A sockets will draw up to 12A, for a total demand of 18A per phase. The total demand current per phase for communal services is 18A.
4.1.6 Example Domestic 2
The document calculates the electrical load and demand for 6 living units per phase. It lists the types of loads in each unit, the quantity and allowance per unit, and uses this to calculate the total demand current for phases L1, L2 and L3, which is 154.4 amps for each phase. The key loads included are lighting, power outlets, cooking ranges, air conditioners and hot water systems.
4.1.5 Example Domestic 1
This document discusses the number of living units per phase of a project. It calculates that for 18 total living units divided into 3 phases, there would be 6 living units per phase.
4.1.4 Step 2
This document summarizes the electrical load calculations for 11 circuits in a home. It lists the load type and description for each circuit, the current allowance per unit, and calculates the demand in amps for circuits 1-10. The largest demands are 17.7 amps for an air conditioner and 15 amps for an off-peak hot water system. The total calculated demand current for each phase is 40.7, 39.5, and 46.5 amps respectively.
4.1.3 Example Solution Three
The document calculates the electrical load and demand current for 11 circuits in a home. It groups the loads into categories like lighting, outlets, appliances, and assigns each a description, allowance, and demand calculation. The total demand current per phase is summarized at the bottom, with the highest draw of 46.5 amps on phase L3.
4.1.2 Example Three
The document outlines the functions and ratings of 12 electrical circuits. Circuit 1 provides power for 13 indoor lighting points. Circuit 10 powers an air conditioner rated at 23.6 amps per phase and can draw power from circuits L1, L2, and L3. Circuits 11a and 11b each power a controlled load hot water unit rated at 3.6 kW.
4.1.1 Example Single
This document calculates the total demand current for an electrical installation consisting of:
- 21 lighting points and 12 double sockets, contributing 5A and 15A respectively
- 15 single sockets contributing 10A
- A 6kW oven contributing 0.5A
- A 2.4kW water heater contributing 0.33A
The total demand current calculated is 45.83A.
5.4.4 LR Circuits
The document discusses the time constant and final current value for an RL circuit. It states that:
1) The time constant for the circuit is 0.17 seconds based on the given inductance and resistance values.
2) It will take approximately 0.85 seconds (5 time constants) for the current to reach its final value.
3) Using Ohm's law, the approximate final current after 0.85 seconds is 2 amps.
14.5.4 Example 1 Part 1
This document calculates the apparent power, power factor, and phase angle for a circuit. It finds that the apparent power is 2.308 kVA by multiplying the current of 9.615 by the voltage of 240. This apparent power is larger than the actual power of 1.5 kW, indicating a poor power factor of 0.65 or a 49.46 degree phase angle between the current and voltage.
14.1.2 TRA Power
Reactive power (Q) and true power (P) combine to form apparent power (S). Apparent power is the combination of true power, which is the usable energy in a circuit, and reactive power, which is stored energy that results from the combination of voltage and current out of phase.
14.5.8 Example 1 Part 5
This document calculates the true power, apparent power, and total current for a circuit. It determines that the true power is 1.5 kW, the apparent power is 1.5009 kVA, and the power factor is 0.99994. It then calculates that with an apparent power of 1.5009 kVA at 240 Volts, the total current would be 6.25 amps.
14.5.7 Example 1 Part 4
This document calculates the capacitive reactance (Xc), current (Ic), and reactive power (Qc) of a capacitor with a capacitance of 80 microfarads operating at 60 Hz with a voltage of 240 V. It then calculates the difference between the inductive and capacitive reactive power as 17 VAR.
14.5.6 Example 1 Part 3
This document calculates the capacitive reactance and capacitance value needed for a reactive power of 1.754 kVAR at 240V. It shows that the capacitive reactance is 32.845 ohms and the required capacitance is 80.761 microfarads.
14.5.5 Example 1 Part 2
The document calculates the reactive power (Q) in kilovolt-amperes reactive (kVAR) from measurements of apparent power (S), true power (P), and the formula that reactive power is equal to the square root of the difference between the square of apparent power and the square of true power. It finds that with an apparent power of 2.308 kVA and a true power of 1.5 kW, the reactive power is 1.754 kVAR.
14.5.2 Correction
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive functioning. Exercise causes chemical changes in the brain that may help protect against mental illness and improve symptoms.
14.5.1 Improvement
Power factor is a measurement of how efficiently electrical power is being used in a circuit. An ideal power factor of one means the current and voltage are in phase, resulting in maximum real power transfer and minimum reactive power. Maintaining a power factor as close to one as possible is important for both utility companies and customers to reduce costs and improve efficiency of electrical power distribution and usage.
14.4.4 Three Watt
This 3 line document contains a formula for calculating the total power (Ptotal) as the sum of three weights (W1, W2, W3). The formula Ptotal = W1 + W2 + W3 is repeated on the second line for emphasis.
Anny Serafina Love - Letter of Recommendation by Kellen Harkins, MS.
This letter, written by Kellen Harkins, Course Director at Full Sail University, commends Anny Love's exemplary performance in the Video Sharing Platforms class. It highlights her dedication, willingness to challenge herself, and exceptional skills in production, editing, and marketing across various video platforms like YouTube, TikTok, and Instagram.
Mastering B2B Payments Webinar from BlueSnap
B2B payments are rapidly changing. Find out the 5 key questions you need to be asking yourself to be sure you are mastering B2B payments today. Learn more at www.BlueSnap.com.
More Related Content
More from Talia Carbis
4.1.7 Example Domestic 3
The document calculates the electrical load of communal services in an apartment building. It shows that 24 lighting points will draw 240 watts and 6 10A sockets will draw up to 12A, for a total demand of 18A per phase. The total demand current per phase for communal services is 18A.
4.1.6 Example Domestic 2
The document calculates the electrical load and demand for 6 living units per phase. It lists the types of loads in each unit, the quantity and allowance per unit, and uses this to calculate the total demand current for phases L1, L2 and L3, which is 154.4 amps for each phase. The key loads included are lighting, power outlets, cooking ranges, air conditioners and hot water systems.
4.1.5 Example Domestic 1
This document discusses the number of living units per phase of a project. It calculates that for 18 total living units divided into 3 phases, there would be 6 living units per phase.
4.1.4 Step 2
This document summarizes the electrical load calculations for 11 circuits in a home. It lists the load type and description for each circuit, the current allowance per unit, and calculates the demand in amps for circuits 1-10. The largest demands are 17.7 amps for an air conditioner and 15 amps for an off-peak hot water system. The total calculated demand current for each phase is 40.7, 39.5, and 46.5 amps respectively.
4.1.3 Example Solution Three
The document calculates the electrical load and demand current for 11 circuits in a home. It groups the loads into categories like lighting, outlets, appliances, and assigns each a description, allowance, and demand calculation. The total demand current per phase is summarized at the bottom, with the highest draw of 46.5 amps on phase L3.
4.1.2 Example Three
The document outlines the functions and ratings of 12 electrical circuits. Circuit 1 provides power for 13 indoor lighting points. Circuit 10 powers an air conditioner rated at 23.6 amps per phase and can draw power from circuits L1, L2, and L3. Circuits 11a and 11b each power a controlled load hot water unit rated at 3.6 kW.
4.1.1 Example Single
This document calculates the total demand current for an electrical installation consisting of:
- 21 lighting points and 12 double sockets, contributing 5A and 15A respectively
- 15 single sockets contributing 10A
- A 6kW oven contributing 0.5A
- A 2.4kW water heater contributing 0.33A
The total demand current calculated is 45.83A.
5.4.4 LR Circuits
The document discusses the time constant and final current value for an RL circuit. It states that:
1) The time constant for the circuit is 0.17 seconds based on the given inductance and resistance values.
2) It will take approximately 0.85 seconds (5 time constants) for the current to reach its final value.
3) Using Ohm's law, the approximate final current after 0.85 seconds is 2 amps.
14.5.4 Example 1 Part 1
This document calculates the apparent power, power factor, and phase angle for a circuit. It finds that the apparent power is 2.308 kVA by multiplying the current of 9.615 by the voltage of 240. This apparent power is larger than the actual power of 1.5 kW, indicating a poor power factor of 0.65 or a 49.46 degree phase angle between the current and voltage.
14.1.2 TRA Power
Reactive power (Q) and true power (P) combine to form apparent power (S). Apparent power is the combination of true power, which is the usable energy in a circuit, and reactive power, which is stored energy that results from the combination of voltage and current out of phase.
14.5.8 Example 1 Part 5
This document calculates the true power, apparent power, and total current for a circuit. It determines that the true power is 1.5 kW, the apparent power is 1.5009 kVA, and the power factor is 0.99994. It then calculates that with an apparent power of 1.5009 kVA at 240 Volts, the total current would be 6.25 amps.
14.5.7 Example 1 Part 4
This document calculates the capacitive reactance (Xc), current (Ic), and reactive power (Qc) of a capacitor with a capacitance of 80 microfarads operating at 60 Hz with a voltage of 240 V. It then calculates the difference between the inductive and capacitive reactive power as 17 VAR.
14.5.6 Example 1 Part 3
This document calculates the capacitive reactance and capacitance value needed for a reactive power of 1.754 kVAR at 240V. It shows that the capacitive reactance is 32.845 ohms and the required capacitance is 80.761 microfarads.
14.5.5 Example 1 Part 2
The document calculates the reactive power (Q) in kilovolt-amperes reactive (kVAR) from measurements of apparent power (S), true power (P), and the formula that reactive power is equal to the square root of the difference between the square of apparent power and the square of true power. It finds that with an apparent power of 2.308 kVA and a true power of 1.5 kW, the reactive power is 1.754 kVAR.
14.5.2 Correction
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive functioning. Exercise causes chemical changes in the brain that may help protect against mental illness and improve symptoms.
14.5.1 Improvement
Power factor is a measurement of how efficiently electrical power is being used in a circuit. An ideal power factor of one means the current and voltage are in phase, resulting in maximum real power transfer and minimum reactive power. Maintaining a power factor as close to one as possible is important for both utility companies and customers to reduce costs and improve efficiency of electrical power distribution and usage.
14.4.4 Three Watt
This 3 line document contains a formula for calculating the total power (Ptotal) as the sum of three weights (W1, W2, W3). The formula Ptotal = W1 + W2 + W3 is repeated on the second line for emphasis.
More from Talia Carbis (20)
Recently uploaded
Anny Serafina Love - Letter of Recommendation by Kellen Harkins, MS.
This letter, written by Kellen Harkins, Course Director at Full Sail University, commends Anny Love's exemplary performance in the Video Sharing Platforms class. It highlights her dedication, willingness to challenge herself, and exceptional skills in production, editing, and marketing across various video platforms like YouTube, TikTok, and Instagram.
Mastering B2B Payments Webinar from BlueSnap
B2B payments are rapidly changing. Find out the 5 key questions you need to be asking yourself to be sure you are mastering B2B payments today. Learn more at www.BlueSnap.com.
Building Your Employer Brand with Social Media
Presented at The Global HR Summit, 6th June 2024
In this keynote, Luan Wise will provide invaluable insights to elevate your employer brand on social media platforms including LinkedIn, Facebook, Instagram, X (formerly Twitter) and TikTok. You'll learn how compelling content can authentically showcase your company culture, values, and employee experiences to support your talent acquisition and retention objectives. Additionally, you'll understand the power of employee advocacy to amplify reach and engagement – helping to position your organization as an employer of choice in today's competitive talent landscape.
Organizational Change Leadership Agile Tour Geneve 2024
Organizational Change Leadership at Agile Tour Geneve 2024
Digital Transformation Frameworks: Driving Digital Excellence
[To download this presentation, visit:
https://www.oeconsulting.com.sg/training-presentations]
This presentation is a curated compilation of PowerPoint diagrams and templates designed to illustrate 20 different digital transformation frameworks and models. These frameworks are based on recent industry trends and best practices, ensuring that the content remains relevant and up-to-date.
Key highlights include Microsoft's Digital Transformation Framework, which focuses on driving innovation and efficiency, and McKinsey's Ten Guiding Principles, which provide strategic insights for successful digital transformation. Additionally, Forrester's framework emphasizes enhancing customer experiences and modernizing IT infrastructure, while IDC's MaturityScape helps assess and develop organizational digital maturity. MIT's framework explores cutting-edge strategies for achieving digital success.
These materials are perfect for enhancing your business or classroom presentations, offering visual aids to supplement your insights. Please note that while comprehensive, these slides are intended as supplementary resources and may not be complete for standalone instructional purposes.
Frameworks/Models included:
Microsoft’s Digital Transformation Framework
McKinsey’s Ten Guiding Principles of Digital Transformation
Forrester’s Digital Transformation Framework
IDC’s Digital Transformation MaturityScape
MIT’s Digital Transformation Framework
Gartner’s Digital Transformation Framework
Accenture’s Digital Strategy & Enterprise Frameworks
Deloitte’s Digital Industrial Transformation Framework
Capgemini’s Digital Transformation Framework
PwC’s Digital Transformation Framework
Cisco’s Digital Transformation Framework
Cognizant’s Digital Transformation Framework
DXC Technology’s Digital Transformation Framework
The BCG Strategy Palette
McKinsey’s Digital Transformation Framework
Digital Transformation Compass
Four Levels of Digital Maturity
Design Thinking Framework
Business Model Canvas
Customer Journey Map
Authentically Social by Corey Perlman - EO Puerto Rico
Authentically Social by Corey Perlman - EO Puerto RicoCorey Perlman, Social Media Speaker and Consultant
Social media for business -- June 2024 is National Volunteer Month --
Check out our June display of books on voluntary organisations
一比一原版新西兰奥塔哥大学毕业证（otago毕业证）如何办理
一模一样【微信：A575476】【新西兰奥塔哥大学毕业证（otago毕业证）成绩单Offer】【微信：A575476】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：A575476】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：A575476】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
HOW TO START UP A COMPANY A STEP-BY-STEP GUIDE.pdf
How to Start Up a Company: A Step-by-Step Guide Starting a company is an exciting adventure that combines creativity, strategy, and hard work. It can seem overwhelming at first, but with the right guidance, anyone can transform a great idea into a successful business. Let's dive into how to start up a company, from the initial spark of an idea to securing funding and launching your startup.
Introduction
Have you ever dreamed of turning your innovative idea into a thriving business? Starting a company involves numerous steps and decisions, but don't worry—we're here to help. Whether you're exploring how to start a startup company or wondering how to start up a small business, this guide will walk you through the process, step by step.
Understanding User Needs and Satisfying Them
https://www.productmanagementtoday.com/frs/26903918/understanding-user-needs-and-satisfying-them
We know we want to create products which our customers find to be valuable. Whether we label it as customer-centric or product-led depends on how long we've been doing product management. There are three challenges we face when doing this. The obvious challenge is figuring out what our users need; the non-obvious challenges are in creating a shared understanding of those needs and in sensing if what we're doing is meeting those needs.
In this webinar, we won't focus on the research methods for discovering user-needs. We will focus on synthesis of the needs we discover, communication and alignment tools, and how we operationalize addressing those needs.
Industry expert Scott Sehlhorst will:
• Introduce a taxonomy for user goals with real world examples
• Present the Onion Diagram, a tool for contextualizing task-level goals
• Illustrate how customer journey maps capture activity-level and task-level goals
• Demonstrate the best approach to selection and prioritization of user-goals to address
• Highlight the crucial benchmarks, observable changes, in ensuring fulfillment of customer needs
Structural Design Process: Step-by-Step Guide for Buildings
The structural design process is explained: Follow our step-by-step guide to understand building design intricacies and ensure structural integrity. Learn how to build wonderful buildings with the help of our detailed information. Learn how to create structures with durability and reliability and also gain insights on ways of managing structures.
Call 8867766396 Satta Matka Dpboss Matka Guessing Satta batta Matka 420 Satta...
CALL 8867766396 SATTA MATKA | DPBOSS | KALYAN MAIN BAZAR | FAST MATKA | DPBOSS GUESSING | TARA MATKA | KALYAN CHART | MATKA BOSS
Innovation Management Frameworks: Your Guide to Creativity & Innovation
Innovation Management Frameworks: Your Guide to Creativity & InnovationOperational Excellence Consulting
[To download this presentation, visit:
https://www.oeconsulting.com.sg/training-presentations]
This PowerPoint compilation offers a comprehensive overview of 20 leading innovation management frameworks and methodologies, selected for their broad applicability across various industries and organizational contexts. These frameworks are valuable resources for a wide range of users, including business professionals, educators, and consultants.
Each framework is presented with visually engaging diagrams and templates, ensuring the content is both informative and appealing. While this compilation is thorough, please note that the slides are intended as supplementary resources and may not be sufficient for standalone instructional purposes.
This compilation is ideal for anyone looking to enhance their understanding of innovation management and drive meaningful change within their organization. Whether you aim to improve product development processes, enhance customer experiences, or drive digital transformation, these frameworks offer valuable insights and tools to help you achieve your goals.
INCLUDED FRAMEWORKS/MODELS:
1. Stanford’s Design Thinking
2. IDEO’s Human-Centered Design
3. Strategyzer’s Business Model Innovation
4. Lean Startup Methodology
5. Agile Innovation Framework
6. Doblin’s Ten Types of Innovation
7. McKinsey’s Three Horizons of Growth
8. Customer Journey Map
9. Christensen’s Disruptive Innovation Theory
10. Blue Ocean Strategy
11. Strategyn’s Jobs-To-Be-Done (JTBD) Framework with Job Map
12. Design Sprint Framework
13. The Double Diamond
14. Lean Six Sigma DMAIC
15. TRIZ Problem-Solving Framework
16. Edward de Bono’s Six Thinking Hats
17. Stage-Gate Model
18. Toyota’s Six Steps of Kaizen
19. Microsoft’s Digital Transformation Framework
20. Design for Six Sigma (DFSS)
To download this presentation, visit:
https://www.oeconsulting.com.sg/training-presentationsIncome Tax exemption for Start up : Section 80 IAC
A presentation on the concept of Exemption of Profits of Start ups from Income Tax
Best practices for project execution and delivery
A select set of project management best practices to keep your project on-track, on-cost and aligned to scope. Many firms have don't have the necessary skills, diligence, methods and oversight of their projects; this leads to slippage, higher costs and longer timeframes. Often firms have a history of projects that simply failed to move the needle. These best practices will help your firm avoid these pitfalls but they require fortitude to apply.
The Genesis of BriansClub.cm Famous Dark WEb Platform
BriansClub.cm, a famous platform on the dark web, has become one of the most infamous carding marketplaces, specializing in the sale of stolen credit card data.
Dpboss Matka Guessing Satta Matta Matka Kalyan Chart Satta Matka
Dpboss Matka Guessing Satta Matta Matka Kalyan Chart Satta Matka➒➌➎➏➑➐➋➑➐➐Dpboss Matka Guessing Satta Matka Kalyan Chart Indian Matka
Dpboss Matka Guessing Satta Matta Matka Kalyan Chart Indian Matka Indian satta Matka Dpboss Matka Kalyan Chart Matka Boss otg matka Guessing Satta Easily Verify Compliance and Security with Binance KYC
Use our simple KYC verification guide to make sure your Binance account is safe and compliant. Discover the fundamentals, appreciate the significance of KYC, and trade on one of the biggest cryptocurrency exchanges with confidence.
Recently uploaded (20)
Anny Serafina Love - Letter of Recommendation by Kellen Harkins, MS.
Anny Serafina Love - Letter of Recommendation by Kellen Harkins, MS.
Organizational Change Leadership Agile Tour Geneve 2024
Organizational Change Leadership Agile Tour Geneve 2024
Digital Transformation Frameworks: Driving Digital Excellence
Digital Transformation Frameworks: Driving Digital Excellence
Authentically Social by Corey Perlman - EO Puerto Rico
Authentically Social by Corey Perlman - EO Puerto Rico
HOW TO START UP A COMPANY A STEP-BY-STEP GUIDE.pdf
HOW TO START UP A COMPANY A STEP-BY-STEP GUIDE.pdf
Structural Design Process: Step-by-Step Guide for Buildings
Structural Design Process: Step-by-Step Guide for Buildings
Call 8867766396 Satta Matka Dpboss Matka Guessing Satta batta Matka 420 Satta...
Call 8867766396 Satta Matka Dpboss Matka Guessing Satta batta Matka 420 Satta...
Innovation Management Frameworks: Your Guide to Creativity & Innovation
Innovation Management Frameworks: Your Guide to Creativity & Innovation
Income Tax exemption for Start up : Section 80 IAC
Income Tax exemption for Start up : Section 80 IAC
The Genesis of BriansClub.cm Famous Dark WEb Platform
The Genesis of BriansClub.cm Famous Dark WEb Platform
Dpboss Matka Guessing Satta Matta Matka Kalyan Chart Satta Matka
Dpboss Matka Guessing Satta Matta Matka Kalyan Chart Satta Matka
Easily Verify Compliance and Security with Binance KYC
Easily Verify Compliance and Security with Binance KYC
Topic6b
- 1. The Evolution of switching system technology Manual Switches Step by Step (SXS) Cross Bar Stored Program Control (SPC)
- 2. The Evolution of switching system technology Manual Switches Step by Step (SXS) Cross Bar Stored Program Control (SPC) Time Division Switching
- 3. Introduction to Customer Switching Systems (CSS) •the CSS switching equipment •user extension equipment •distributors •cable •connection to PSTN and/or remote CSS
- 4. Introduction to Customer Switching Systems (CSS) •private automatic branch exchange (PABX) •small business (key) system (SBS) •automatic call distributor (ACD)