The document outlines six key garment manufacturing processes and the quality checks performed at each stage: 1) Quality control in sampling involves checks of measurements, fabric color, weight, fastness, and stitch count. 2) Quality control in marker making checks for notch/drill marks, fabric width/length exceeding marker size, and stripe matching. 3) Quality control in fabric spreading checks for correct alignment, requirements, stripe matching, ply count, and splicing. 4) Quality control in fabric cutting checks for accurate pattern/piece dimensions, notches, drill holes, fraying, and blade deflection. 5) Quality control in sewing checks thread count, needle size, measurements, seams, and trimming matching. 6) Quality

1. Top 6 Garment Manufacturing Processes
And Quality Checks

2. Quality Control in Sampling
Quality checks to be undertaken
 Measurements checks
 Fabric color
 GSM
 Fastness
 Stitch per inch

3. Quality Control in Marker Making
Quality checks to be undertaken
 Notch or drill marks must be in
place
 Fabric width must be higher than
marker width
 Fabric length must be higher than
marker length
 Matching of checks and stripes
should be checked

4. Quality Control in Fabric Spreading
s
Quality checks to be undertaken

Fabric should be spread according to
correct alignment with marker
length and width

Maintain requirement of spreading

Matching of checks and stripes

Lay should contain correct number
of fabric ply

Correct Ply direction should be
ensured

Fabric splicing should be controlled

5. Quality Control in Fabric Cutting
Quality checks to be undertaken
 The dimension of the pattern and the
cut piece should be same and accurate
 Notch should be cut finely
 Drill hole should made at proper place
 No yarn fraying should occur at cut edge
 Blade deflection should be avoided

6. Quality Control in Fabric Cutting
Quality checks to be undertaken

Cut panel and accessories checking

Thread count check

Needle size checking

Garments measurement check

Seam fault check

Mismatching of trimming should be checked

Checks for Shade variation within the cloth

7. Quality Control in Finishing Section
Quality checks to be undertaken

Proper inspection of the garments
including measurement, spot, dirt,
impurities

Shading variation check

Broken chain or buttons checks

Checks for Wrong folds

Wanted wrinkle or fold in lining

Collar closing checks

Side seam checks

8. For More Information On Garment
Manufacturing Do Visit Us On
www.thesourcingplace.com