Titanium Top Ten Features:1,the density is small, high strength;2, corrosion resistance;3, good heat resistance;4, low temperature performance:5, anti-damping performance;6, non-magnetic, non-toxic;7, the tensile strength and its yield strength close to；8, good heat transfer performance；9, low elastic modulus；10, inspiratory performance.

1. Titanium Top Ten Features:
1,thedensity is small, high strength:
The density of metallic titanium is 4.51g / cm3, higher than that of
aluminum and lower than that of steel, copper and nickel, but the
strength is at the head of metal.
2, corrosion resistance:
Titanium is a very lively metal whose equilibrium potential is very low
and the thermodynamic corrosion in the medium tends to be large. But
in fact titanium is stable in many media, such as titanium in the oxidation,
neutral and weak reductiveand other media is corrosion-resistant.
3, good heat resistance:
The new titanium alloy can be used at a temperature of 600 ° C or
higher for a long period of time.
4, low temperatureperformance:

2. Titanium alloy TA7 (Ti-5Al-2.5Sn), TC4 (Ti-6Al-4V) and Ti-2.5Zr-1.5Mo as
the representative of the low-temperature titanium alloy, the strength
decreases with the temperature, but the plastic change is not Big. In the
-196-253 ℃ low temperature to maintain good ductility and toughness,
to avoid the metal cold brittle, low temperature containers, tanks and
other equipment ideal material.
5, anti-damping performance:
Metal titanium by mechanical vibration, electric vibration, and steel,
copper metal compared to its own vibration decay time is the longest.
6, non-magnetic, non-toxic:
Titanium is a non-magnetic metal, in a large magnetic field will not be
magnetized, non-toxic and with the human body tissue and blood have
good compatibility, so the medical profession.

3. 7, the tensile strength and its yield strength close to:
This performance of titanium shows that its yield ratio (tensile strength /
yield strength) is high, indicating that the metal titanium material in the
forming plastic deformation is poor. As the titanium yield limit and
modulus of elasticity ratio, so that the resilience of titanium molding
capacity.
8, good heat transfer performance:
Although the thermal conductivity of metallic titanium is lower than that
of carbon steel and copper, the wall thickness can be greatly reduced
due to the excellent corrosion resistance of titanium, and the heat
transfer method of surface and steam is droplet condensation, which
reduces the heat group and too surface Non-scaling can also reduce the
thermal resistance, so that the heat transfer performance of titanium
significantly improved. In the caseof

4. 9, low elastic modulus:
The elastic modulus of titanium is 106.4GMPa at room temperature, 57%
of steel.
10, inspiratory performance:
Titanium is a very active chemical nature of the metal, at high
temperatures with many elements and compounds can react. Titanium
suction mainly refers to the high temperature and carbon, hydrogen,
nitrogen, oxygen react.