The answer is C. securin.APC degrade securin to release separase .pdf
•
0 likes•3 views
The answer is: C. securin. APC degrade securin to release separase which degrades cohesin. Solution The answer is: C. securin. APC degrade securin to release separase which degrades cohesin..
Report
Share
Report
Share
Download to read offline
Recommended
Driver.java import java.util.Scanner; import java.text.Decimal.pdf
The Driver class contains methods to print numeric sequences, calculate triangular numbers, print arrays, and find the range between minimum and maximum values in an array. The main method calls each method, printing outputs including the sequences 0-10, -10 to 0, the sum of triangular numbers to 10, an array of values, and the range of the array.
Question 1,2,4 ------------------------------------Please check.pdf
Question 1,2,4 :-
-----------------------------------
Please check comments in Programme
#include
/**
* Method for Linear Search
* Loop through given array and search for given key
* IF found return index and stop
* else -1 will be returned at the end
*
*/
int search(int array[],int key,int size){
int index = -1;
for (int c = 0; c < size; c++)
{
if (array[c] == key) /* if required element found */
{
printf(\"%d is present at location %d.\ \", key, c+1);
index = c;
break;
}
}
if(index == -1)
printf(\"%d is not found.\ \", key);
return index;
}
/**
* Function for Binary search
* Binary search is used only for sorted arrays
* Check key with element at middle position
* if key == then return middle positon
* if key > middle position , apply same for sub array range from [middle...last]
* if key < middle position , apply same for sub array range from [0..middle]
*
*/
int binary_search(int array[],int key,int start,int end){
int index = -1;
int first = start;
int last = end;
int middle = (first+last)/2;
while (first <= last) {
//Print array between first nad last for each step
printf(\"Start binary search step.\ \");
for(int i = first ; i < last ; i++){
printf(\"Binary search step element.%d\ \",array[i]);
}
printf(\"Stop binary search step.\ \");
if (array[middle] < key)
first = middle + 1;
else if (array[middle] == key) {
index = middle;
printf(\"%d found at location %d.\ \", key, middle+1);
break;
}
else
last = middle - 1;
middle = (first + last)/2;
}
return index;
}
/**
* Recursive linear search
* Instead of for loop call same method with next index
* first pass 0, check if key found at index 0, if not found call same method with index 1 .....
*/
int linear_search_recursive(int array[],int key,int size,int index){
if(array[index] == key){
printf(\"%d found at location %d.\ \",key, index);
return index;
}
else if (index >= size-1){
return -1;
}
else{
return linear_search_recursive(array,key,size,++index);
}
}
/**
* Recursive Binary Search
* Recursively call Binary Search , check key found at element middle
* if key == then return middle positon
* if key > middle position , call recursive method for sub array range from [middle...last]
* if key < middle position , call recursive method for sub array range from [0..middle]
*/
int binary_search_recursive(int array[],int key,int start,int end){
//Key not found
if(start> end){
return -1;
}
int index = -1;
int first = start;
int last = end;
int middle = (first+last)/2;
//Print array between first nad last for each step
printf(\"Start binary search step.\ \");
for(int i = first ; i < last ; i++){
printf(\"Binary search step element.%d\ \",array[i]);
}
printf(\"Stop binary search step.\ \");
if (array[middle] < key){
first = middle + 1;
return binary_search_recursive(array,key,first,last) ;
}else if (array[middle] == key) {
printf(\"%d found at location %d.\ \", key, middle+1);
return middle;
}
else{
last = middle - 1;
return binary_search_recursive(array,key,first,last) ;
}
return -1;
}
/**
*Function t.
HiCan you please summarise the question. More information confuse .pdf
Hi
Can you please summarise the question. More information confuse to sole this question
Solution
Hi
Can you please summarise the question. More information confuse to sole this question.
What property of proteins us used to separate them in HICHydrophob.pdf
What property of proteins us used to separate them in HIC
Hydrophobic interaction chromatography (HIC) isolates Proteins in light of their hydrophobicity,
and is regularly utilized as a middle stride as a part of a cleaning plan. Proteins are bound to a
stationary stage in a high ionic quality cushion and, along these lines, HIC can commonly be
performed instantly after particle trade chromatography with no cradle trade or weakening
required. HIC is likewise usually performed after an ammonium sulfate precipitation, a strategy
that can be utilized to rapidly expel proteins by accelerating a few, yet not all, proteins with salt.
HIC is infrequently material in early strides of a purging plan or as a last stride in the expulsion
of follow polluting influences from the protein of intrigue.
====================================================
Described mobile and stationary phase in HIC
Hydrophobic association chromatography (HIC) is an other option to turned around stage
chromatography for abusing the hydrophobic properties of proteins.
The expansion of a salt to the mobile stage support and test arrangement advances protein-
medium connections. The proteins are adsorbed to the medium in a mobile stage containing a
high grouping of salt. The vast majority of the bound proteins are viably desorbed by essentially
washing with water or a weaken, close impartial support. Since HIC utilizes a more polar, less
denaturing environment than RPLC, it is getting to be well known for protein filtration, regularly
in blend with particle trade or gel filtration chromatography.
Solution
What property of proteins us used to separate them in HIC
Hydrophobic interaction chromatography (HIC) isolates Proteins in light of their hydrophobicity,
and is regularly utilized as a middle stride as a part of a cleaning plan. Proteins are bound to a
stationary stage in a high ionic quality cushion and, along these lines, HIC can commonly be
performed instantly after particle trade chromatography with no cradle trade or weakening
required. HIC is likewise usually performed after an ammonium sulfate precipitation, a strategy
that can be utilized to rapidly expel proteins by accelerating a few, yet not all, proteins with salt.
HIC is infrequently material in early strides of a purging plan or as a last stride in the expulsion
of follow polluting influences from the protein of intrigue.
====================================================
Described mobile and stationary phase in HIC
Hydrophobic association chromatography (HIC) is an other option to turned around stage
chromatography for abusing the hydrophobic properties of proteins.
The expansion of a salt to the mobile stage support and test arrangement advances protein-
medium connections. The proteins are adsorbed to the medium in a mobile stage containing a
high grouping of salt. The vast majority of the bound proteins are viably desorbed by essentially
washing with water or a weaken, close impartial support. Since HIC uti.
upload complete priblem somthing is missingSolutionupload comp.pdf
The document discusses an upload issue where the process completed but something was missing. No other details are provided about the upload, missing content, or possible solutions. The document repeats the same short statement twice without providing any useful information to understand or resolve the issue.
the phenomena responsible for this type of inheritancce is Epistasis.pdf
the phenomena responsible for this type of inheritancce is Epistasis. in this particular example
two recessive allele at one locus has the ability to affect the allele of other locus.say for example,
lets take first locus to be C and other to be P.
later on it was discovered that it is linked to the biochemistry of the pea plant.
Solution
the phenomena responsible for this type of inheritancce is Epistasis. in this particular example
two recessive allele at one locus has the ability to affect the allele of other locus.say for example,
lets take first locus to be C and other to be P.
later on it was discovered that it is linked to the biochemistry of the pea plant..
The substrate in urease test is urea.The end products in urease te.pdf
The substrate in urease test is urea.
The end products in urease test are urea, carbondioxide and water
(NH2)2 CO+2H2O CO2+ H2O + 2NH3
Urease test is used to determine the ability of an organism to hydrolyse urea into ammonia and
carbon dioxide. The ammonia formed during the reaction turns the media into alkaline, which is
indicated by phenol red, changing its color from light orange (at pH 6.8) to pink (at pH 8.1).
Rapid urease positive organisms like Helicobacter pylori, turns the medium pink within 24
hours. Weakly positive organisms take several days, whereas negative organisms produce no
colour.
Rapid Urease Test (RUT) is a popular and simple test which uses the above principle , for
detecting the presence of Helicobacter pylori on gastric mucosa. The test is also known as CLO
test (Campylobacter like organism test). It is also useful in identifying several genera and species
of Enterobacteriaceae like Proteus spp, Klebsiella spp and Yersinia spp. Also for identifying
Cryptococcus spp and Brucella spp.
Solution
The substrate in urease test is urea.
The end products in urease test are urea, carbondioxide and water
(NH2)2 CO+2H2O CO2+ H2O + 2NH3
Urease test is used to determine the ability of an organism to hydrolyse urea into ammonia and
carbon dioxide. The ammonia formed during the reaction turns the media into alkaline, which is
indicated by phenol red, changing its color from light orange (at pH 6.8) to pink (at pH 8.1).
Rapid urease positive organisms like Helicobacter pylori, turns the medium pink within 24
hours. Weakly positive organisms take several days, whereas negative organisms produce no
colour.
Rapid Urease Test (RUT) is a popular and simple test which uses the above principle , for
detecting the presence of Helicobacter pylori on gastric mucosa. The test is also known as CLO
test (Campylobacter like organism test). It is also useful in identifying several genera and species
of Enterobacteriaceae like Proteus spp, Klebsiella spp and Yersinia spp. Also for identifying
Cryptococcus spp and Brucella spp..
later we create a specialstack class ,which inherits from stack cl.pdf
//later we create a specialstack class ,which inherits from stack class.there we return the smallest
integer
//implementation
#include
#include
using namespace std;
/* A simple stack class named IntStack with push and pop operations */
class IntStack
{
private:
static const int max = 100;
int arr[max];
int top;
public:
//constructor for initialising value of top
IntStack()
{
top = -1;
}
void push(int x);
int pop();
bool isEmpty();
bool isFull();
};
/* Stack\'s member method to check if the stack is iempty */
bool IntStack::isEmpty()
{
if(top == -1)
return true;
return false;
}
/* Stack\'s member method to check if the stack is full */
bool IntStack::isFull()
{
if(top == max - 1)
return true;
return false;
}
/* Stack\'s member method push() to insert an element */
void IntStack::push(int x)
{
if(isFull())
{
cout<<\"Stack Overflow\";
}
top++;
arr[top] = x;
}
/* Stack\'s member method pop() to remove an element from it */
int IntStack::pop()
{
if(isEmpty())
{
cout<<\"Stack Underflow\";
abort();
}
int x = arr[top];
top--;
return x;
}
/* A class that supports all the stack operations and one additional operation getMIN() that
returns the minimum element from stack at any time. This class inherits from the stack class and
uses an auxiliarry stack that holds minimum elements */
class SpecialStack: public IntStack
{
IntStack min;
public:
//function declarations
void push(int x);
int pop();
int getMIN();
};
/* SpecialStack\'s member method to insert an element to it. This method
makes sure that the min stack is also updated with appropriate minimum
values */
void SpecialStack::push(int x)
{
if(isEmpty()==true)
{
IntStack::push(x);
min.push(x);
}
else
{
IntStack::push(x);
int y = min.pop();
min.push(y);
/* push only when the incoming element of main stack is smaller
than or equal to top of auxiliary stack */
if( x <= y )
min.push(x);
}
}
/* SpecialStack\'s member method to remove an element from it. This method
removes top element from min stack also. */
int SpecialStack::pop()
{
int x = IntStack::pop();
int y = min.pop();
/* Push the popped element y back only if it is not equal to x */
if ( y != x )
min.push(y);
return x;
}
/* SpecialStack\'s member method to get minimum element from it. */
int SpecialStack::getMIN()
{
int x = min.pop();
min.push(x);
return x;
}
/* main program to test SpecialStack methods */
//execution starts here
int main()
{
SpecialStack s;
//push 3 elements and get the minimum
s.push(15);
s.push(25);
s.push(33);
cout<
#include
using namespace std;
/* A simple stack class named IntStack with push and pop operations */
class IntStack
{
private:
static const int max = 100;
int arr[max];
int top;
public:
//constructor for initialising value of top
IntStack()
{
top = -1;
}
void push(int x);
int pop();
bool isEmpty();
bool isFull();
};
/* Stack\'s member method to check if the stack is iempty */
bool IntStack::isEmpty()
{
if(top == -1)
return true;
return false;
}
/* Stack\'s member method to check if the stack is full */
bool IntStac.
Recommended
Driver.java import java.util.Scanner; import java.text.Decimal.pdf
The Driver class contains methods to print numeric sequences, calculate triangular numbers, print arrays, and find the range between minimum and maximum values in an array. The main method calls each method, printing outputs including the sequences 0-10, -10 to 0, the sum of triangular numbers to 10, an array of values, and the range of the array.
Question 1,2,4 ------------------------------------Please check.pdf
Question 1,2,4 :-
-----------------------------------
Please check comments in Programme
#include
/**
* Method for Linear Search
* Loop through given array and search for given key
* IF found return index and stop
* else -1 will be returned at the end
*
*/
int search(int array[],int key,int size){
int index = -1;
for (int c = 0; c < size; c++)
{
if (array[c] == key) /* if required element found */
{
printf(\"%d is present at location %d.\ \", key, c+1);
index = c;
break;
}
}
if(index == -1)
printf(\"%d is not found.\ \", key);
return index;
}
/**
* Function for Binary search
* Binary search is used only for sorted arrays
* Check key with element at middle position
* if key == then return middle positon
* if key > middle position , apply same for sub array range from [middle...last]
* if key < middle position , apply same for sub array range from [0..middle]
*
*/
int binary_search(int array[],int key,int start,int end){
int index = -1;
int first = start;
int last = end;
int middle = (first+last)/2;
while (first <= last) {
//Print array between first nad last for each step
printf(\"Start binary search step.\ \");
for(int i = first ; i < last ; i++){
printf(\"Binary search step element.%d\ \",array[i]);
}
printf(\"Stop binary search step.\ \");
if (array[middle] < key)
first = middle + 1;
else if (array[middle] == key) {
index = middle;
printf(\"%d found at location %d.\ \", key, middle+1);
break;
}
else
last = middle - 1;
middle = (first + last)/2;
}
return index;
}
/**
* Recursive linear search
* Instead of for loop call same method with next index
* first pass 0, check if key found at index 0, if not found call same method with index 1 .....
*/
int linear_search_recursive(int array[],int key,int size,int index){
if(array[index] == key){
printf(\"%d found at location %d.\ \",key, index);
return index;
}
else if (index >= size-1){
return -1;
}
else{
return linear_search_recursive(array,key,size,++index);
}
}
/**
* Recursive Binary Search
* Recursively call Binary Search , check key found at element middle
* if key == then return middle positon
* if key > middle position , call recursive method for sub array range from [middle...last]
* if key < middle position , call recursive method for sub array range from [0..middle]
*/
int binary_search_recursive(int array[],int key,int start,int end){
//Key not found
if(start> end){
return -1;
}
int index = -1;
int first = start;
int last = end;
int middle = (first+last)/2;
//Print array between first nad last for each step
printf(\"Start binary search step.\ \");
for(int i = first ; i < last ; i++){
printf(\"Binary search step element.%d\ \",array[i]);
}
printf(\"Stop binary search step.\ \");
if (array[middle] < key){
first = middle + 1;
return binary_search_recursive(array,key,first,last) ;
}else if (array[middle] == key) {
printf(\"%d found at location %d.\ \", key, middle+1);
return middle;
}
else{
last = middle - 1;
return binary_search_recursive(array,key,first,last) ;
}
return -1;
}
/**
*Function t.
HiCan you please summarise the question. More information confuse .pdf
Hi
Can you please summarise the question. More information confuse to sole this question
Solution
Hi
Can you please summarise the question. More information confuse to sole this question.
What property of proteins us used to separate them in HICHydrophob.pdf
What property of proteins us used to separate them in HIC
Hydrophobic interaction chromatography (HIC) isolates Proteins in light of their hydrophobicity,
and is regularly utilized as a middle stride as a part of a cleaning plan. Proteins are bound to a
stationary stage in a high ionic quality cushion and, along these lines, HIC can commonly be
performed instantly after particle trade chromatography with no cradle trade or weakening
required. HIC is likewise usually performed after an ammonium sulfate precipitation, a strategy
that can be utilized to rapidly expel proteins by accelerating a few, yet not all, proteins with salt.
HIC is infrequently material in early strides of a purging plan or as a last stride in the expulsion
of follow polluting influences from the protein of intrigue.
====================================================
Described mobile and stationary phase in HIC
Hydrophobic association chromatography (HIC) is an other option to turned around stage
chromatography for abusing the hydrophobic properties of proteins.
The expansion of a salt to the mobile stage support and test arrangement advances protein-
medium connections. The proteins are adsorbed to the medium in a mobile stage containing a
high grouping of salt. The vast majority of the bound proteins are viably desorbed by essentially
washing with water or a weaken, close impartial support. Since HIC utilizes a more polar, less
denaturing environment than RPLC, it is getting to be well known for protein filtration, regularly
in blend with particle trade or gel filtration chromatography.
Solution
What property of proteins us used to separate them in HIC
Hydrophobic interaction chromatography (HIC) isolates Proteins in light of their hydrophobicity,
and is regularly utilized as a middle stride as a part of a cleaning plan. Proteins are bound to a
stationary stage in a high ionic quality cushion and, along these lines, HIC can commonly be
performed instantly after particle trade chromatography with no cradle trade or weakening
required. HIC is likewise usually performed after an ammonium sulfate precipitation, a strategy
that can be utilized to rapidly expel proteins by accelerating a few, yet not all, proteins with salt.
HIC is infrequently material in early strides of a purging plan or as a last stride in the expulsion
of follow polluting influences from the protein of intrigue.
====================================================
Described mobile and stationary phase in HIC
Hydrophobic association chromatography (HIC) is an other option to turned around stage
chromatography for abusing the hydrophobic properties of proteins.
The expansion of a salt to the mobile stage support and test arrangement advances protein-
medium connections. The proteins are adsorbed to the medium in a mobile stage containing a
high grouping of salt. The vast majority of the bound proteins are viably desorbed by essentially
washing with water or a weaken, close impartial support. Since HIC uti.
upload complete priblem somthing is missingSolutionupload comp.pdf
The document discusses an upload issue where the process completed but something was missing. No other details are provided about the upload, missing content, or possible solutions. The document repeats the same short statement twice without providing any useful information to understand or resolve the issue.
the phenomena responsible for this type of inheritancce is Epistasis.pdf
the phenomena responsible for this type of inheritancce is Epistasis. in this particular example
two recessive allele at one locus has the ability to affect the allele of other locus.say for example,
lets take first locus to be C and other to be P.
later on it was discovered that it is linked to the biochemistry of the pea plant.
Solution
the phenomena responsible for this type of inheritancce is Epistasis. in this particular example
two recessive allele at one locus has the ability to affect the allele of other locus.say for example,
lets take first locus to be C and other to be P.
later on it was discovered that it is linked to the biochemistry of the pea plant..
The substrate in urease test is urea.The end products in urease te.pdf
The substrate in urease test is urea.
The end products in urease test are urea, carbondioxide and water
(NH2)2 CO+2H2O CO2+ H2O + 2NH3
Urease test is used to determine the ability of an organism to hydrolyse urea into ammonia and
carbon dioxide. The ammonia formed during the reaction turns the media into alkaline, which is
indicated by phenol red, changing its color from light orange (at pH 6.8) to pink (at pH 8.1).
Rapid urease positive organisms like Helicobacter pylori, turns the medium pink within 24
hours. Weakly positive organisms take several days, whereas negative organisms produce no
colour.
Rapid Urease Test (RUT) is a popular and simple test which uses the above principle , for
detecting the presence of Helicobacter pylori on gastric mucosa. The test is also known as CLO
test (Campylobacter like organism test). It is also useful in identifying several genera and species
of Enterobacteriaceae like Proteus spp, Klebsiella spp and Yersinia spp. Also for identifying
Cryptococcus spp and Brucella spp.
Solution
The substrate in urease test is urea.
The end products in urease test are urea, carbondioxide and water
(NH2)2 CO+2H2O CO2+ H2O + 2NH3
Urease test is used to determine the ability of an organism to hydrolyse urea into ammonia and
carbon dioxide. The ammonia formed during the reaction turns the media into alkaline, which is
indicated by phenol red, changing its color from light orange (at pH 6.8) to pink (at pH 8.1).
Rapid urease positive organisms like Helicobacter pylori, turns the medium pink within 24
hours. Weakly positive organisms take several days, whereas negative organisms produce no
colour.
Rapid Urease Test (RUT) is a popular and simple test which uses the above principle , for
detecting the presence of Helicobacter pylori on gastric mucosa. The test is also known as CLO
test (Campylobacter like organism test). It is also useful in identifying several genera and species
of Enterobacteriaceae like Proteus spp, Klebsiella spp and Yersinia spp. Also for identifying
Cryptococcus spp and Brucella spp..
later we create a specialstack class ,which inherits from stack cl.pdf
//later we create a specialstack class ,which inherits from stack class.there we return the smallest
integer
//implementation
#include
#include
using namespace std;
/* A simple stack class named IntStack with push and pop operations */
class IntStack
{
private:
static const int max = 100;
int arr[max];
int top;
public:
//constructor for initialising value of top
IntStack()
{
top = -1;
}
void push(int x);
int pop();
bool isEmpty();
bool isFull();
};
/* Stack\'s member method to check if the stack is iempty */
bool IntStack::isEmpty()
{
if(top == -1)
return true;
return false;
}
/* Stack\'s member method to check if the stack is full */
bool IntStack::isFull()
{
if(top == max - 1)
return true;
return false;
}
/* Stack\'s member method push() to insert an element */
void IntStack::push(int x)
{
if(isFull())
{
cout<<\"Stack Overflow\";
}
top++;
arr[top] = x;
}
/* Stack\'s member method pop() to remove an element from it */
int IntStack::pop()
{
if(isEmpty())
{
cout<<\"Stack Underflow\";
abort();
}
int x = arr[top];
top--;
return x;
}
/* A class that supports all the stack operations and one additional operation getMIN() that
returns the minimum element from stack at any time. This class inherits from the stack class and
uses an auxiliarry stack that holds minimum elements */
class SpecialStack: public IntStack
{
IntStack min;
public:
//function declarations
void push(int x);
int pop();
int getMIN();
};
/* SpecialStack\'s member method to insert an element to it. This method
makes sure that the min stack is also updated with appropriate minimum
values */
void SpecialStack::push(int x)
{
if(isEmpty()==true)
{
IntStack::push(x);
min.push(x);
}
else
{
IntStack::push(x);
int y = min.pop();
min.push(y);
/* push only when the incoming element of main stack is smaller
than or equal to top of auxiliary stack */
if( x <= y )
min.push(x);
}
}
/* SpecialStack\'s member method to remove an element from it. This method
removes top element from min stack also. */
int SpecialStack::pop()
{
int x = IntStack::pop();
int y = min.pop();
/* Push the popped element y back only if it is not equal to x */
if ( y != x )
min.push(y);
return x;
}
/* SpecialStack\'s member method to get minimum element from it. */
int SpecialStack::getMIN()
{
int x = min.pop();
min.push(x);
return x;
}
/* main program to test SpecialStack methods */
//execution starts here
int main()
{
SpecialStack s;
//push 3 elements and get the minimum
s.push(15);
s.push(25);
s.push(33);
cout<
#include
using namespace std;
/* A simple stack class named IntStack with push and pop operations */
class IntStack
{
private:
static const int max = 100;
int arr[max];
int top;
public:
//constructor for initialising value of top
IntStack()
{
top = -1;
}
void push(int x);
int pop();
bool isEmpty();
bool isFull();
};
/* Stack\'s member method to check if the stack is iempty */
bool IntStack::isEmpty()
{
if(top == -1)
return true;
return false;
}
/* Stack\'s member method to check if the stack is full */
bool IntStac.
I think that 34SolutionI think that 34.pdf
This very short document does not provide enough context or information to generate a meaningful 3 sentence summary. It contains a statement about the number 34 but does not elaborate on the topic or point being discussed.
D(ANSWER)Polycrystalline or multicrystalline materials, or polycry.pdf
D(ANSWER)
Polycrystalline or multicrystalline materials, or polycrystals are solids that are composed of
many crystallites of varying size and orientation. Crystallites are also referred to as grains. They
are small or even microscopic crystals and form during the cooling of many materials. Their
orientation can be random with no preferred direction, called random texture, or directed,
possibly due to growth and processing conditions. Fiber texture is an example of the latter. The
areas where crystallite grains meet are known as grain boundaries.
Grain boundaries are interfaces where crystals of different orientations meet. A grain boundary is
a single-phase interface, with crystals on each side of the boundary being identical except in
orientation. The term \"crystallite boundary\" is sometimes, though rarely, used. Grain boundary
areas contain those atoms that have been perturbed from their original lattice sites, dislocations,
and impurities that have migrated to the lower energy grain boundary.
Treating a grain boundary geometrically as an interface of a single crystal cut into two parts, one
of which is rotated, we see that there are five variables required to define a grain boundary. The
first two numbers come from the unit vector that specifies a rotation axis. The third number
designates the angle of rotation of the grain. The final two numbers specify the plane of the grain
boundary (or a unit vector that is normal to this plane).
Grain boundaries disrupt the motion of dislocations through a material. Dislocation propagation
is impeded because of the stress field of the grain boundary defect region and the lack of slip
planes and slip directions and overall alignment across the boundaries. Reducing grain size is
therefore a common way to improve strength, often without any sacrifice in toughness because
the smaller grains create more obstacles per unit area of slip plane. This crystallite size-strength
relationship is given by the Hall-Petch relationship. The high interfacial energy and relatively
weak bonding in grain boundaries makes them preferred sites for the onset of corrosion and for
the precipitation of new phases from the solid.
Grain boundary migration plays an important role in many of the mechanisms of creep. Grain
boundary migration occurs when a shear stress acts on the grain boundary plane and causes the
grains to slide. This means that fine-grained materials actually have a poor resistance to creep
relative to coarser grains, especially at high temperatures, because smaller grains contain more
atoms in grain boundary sites. Grain boundaries also cause deformation in that they are sources
and sinks of point defects. Voids in a material tend to gather in a grain boundary, and if this
happens to a critical extent, the material could fracture.
During grain boundary migration, the rate determining step depends on the angle between two
adjacent grains. In a small angle dislocation boundary, the migration rate depends on vac.
1.It is the process of directing the television assistances are tran.pdf
1.It is the process of directing the television assistances are transported with the help of intrenet
protocol insdicating a packed switched network like local area network.
2.This iptv provides a power to bourn the media in tiny batches.moreover it provides a com-pell
alternative as a commanding method to appart the content whe help of digital rights
management.
3.Selecting a iptv lattice is depending upon the multiples containing service portfilo and network
investment .
4.super head end : It is brain of iptv system.this is the place where broadcasting channels are
received and transmited through the sources like fibre feeds,satelites.the video demand storage
content is present at this stage.
5.Coustmer premise equipement:It is joined with home wiring to produce the home network.it
contains a residential gate which is used to handle the control request from set top box.originally
the cost of home wiring is costly,service providers extremely prefers to rewire the homes at the
time of begining installation.
6.Core network: It is the middle part of a communication system offering a interconnection shift
between the boarder networks.it is utilized to offer a soloitary connection.
7.headend end :It is a slice of television system.modulators demodulators processors and
antennna....etc apparatus are used at this headend.
protocols:
1.This iptv layers on multicast ans unicast.the protocols that are utilized in iptv are as below.
1.service based provider streaming
2.web based unicast only live and vod
3.web based multicast live and unicast vod streaming
4.joined tv\'s set top boxes
Devices
The devices utilized in internet protocol telivision are as below
1.android
2.mobiles
3.smart tvs
4.spark
5.royal
6.sun price ................etc
Features specific to television services
1.Time shifting :A combo of iptv and digital video recorder allows the time shifting of
scheduling theme.
2.Personalization:End-to-end iptv methodology braces the bidirectional communicationa and
permits the end users to indidualize their tv watching atitude by permiting the users to mark as
per their mood and what they want to see.
3.bandwidth requirements:This iptv system supports as per the channel requested by user.hence
the iptv system allows the cable operators in order to preserve the bandwidth.
4.Support to interact tv:This iptv system offers two -way proficiency to perit the network
operators to carry a complete output interactive of tv applications like games,internet browsing.
Solution
1.It is the process of directing the television assistances are transported with the help of intrenet
protocol insdicating a packed switched network like local area network.
2.This iptv provides a power to bourn the media in tiny batches.moreover it provides a com-pell
alternative as a commanding method to appart the content whe help of digital rights
management.
3.Selecting a iptv lattice is depending upon the multiples containing service portfilo and network
investment .
4.super head en.
Answer The major objective of implementing a health information man.pdf
Answer: The major objective of implementing a health information management system is to
automate and streamline the process of capturing, processing, maintaining/storing, and analysing
the information related to health and health case. This information is just not related to one thing,
but covers many aspects and involves many stakeholders. It is related to patient\'s profile
(personal as well as medical), treatment prescribed to him/her, doctor\'s and health officials\'
profile, other relevant health records like details and results of various tests (if performed),
accounting, health related human resources among many other things.
Out of these, the most important part is - information related to patient\'s profile, treatment
prescribed, and other relevant health records. Collectively, this is termed as Electronic Health
Records (EHRs) which lies at the core of any HIMS. The nature and kind of information that is
present in EHRs is very personal and sensitive. Hence, ensuring security, privacy and
confidentiality of EHRs in HMIS should be utmost concern because if this information is
breached or comromised, its after-effects can be desasterous.
Hence, while implementing any HMIS, it is very critical to think of required and relevant
security and data protection mechanisms and make provisions for them into the system.
Solution
Answer: The major objective of implementing a health information management system is to
automate and streamline the process of capturing, processing, maintaining/storing, and analysing
the information related to health and health case. This information is just not related to one thing,
but covers many aspects and involves many stakeholders. It is related to patient\'s profile
(personal as well as medical), treatment prescribed to him/her, doctor\'s and health officials\'
profile, other relevant health records like details and results of various tests (if performed),
accounting, health related human resources among many other things.
Out of these, the most important part is - information related to patient\'s profile, treatment
prescribed, and other relevant health records. Collectively, this is termed as Electronic Health
Records (EHRs) which lies at the core of any HIMS. The nature and kind of information that is
present in EHRs is very personal and sensitive. Hence, ensuring security, privacy and
confidentiality of EHRs in HMIS should be utmost concern because if this information is
breached or comromised, its after-effects can be desasterous.
Hence, while implementing any HMIS, it is very critical to think of required and relevant
security and data protection mechanisms and make provisions for them into the system..
The key assumptions made by the Hadoop Distributed File System(HDFS).pdf
The key assumptions made by the Hadoop Distributed File System(HDFS) approach are:
1. High Volume: The volume of data in HDFS is expected to be really large, some like being
measured in terabytes or even petabytes.
2. High Availability: The cluster can contain thousands of file servers, and some of them may be
down(unavailable) at some given instance.
3. Reliable Communication: Communication is reliable among working machines.
4. The filesystem is not designed for interactive operations, instead, we prefer high throughput
over low latency.
5. Servers are distributed among racks and data centers, to ensure redundancy, and therefore
availability.
Solution
The key assumptions made by the Hadoop Distributed File System(HDFS) approach are:
1. High Volume: The volume of data in HDFS is expected to be really large, some like being
measured in terabytes or even petabytes.
2. High Availability: The cluster can contain thousands of file servers, and some of them may be
down(unavailable) at some given instance.
3. Reliable Communication: Communication is reliable among working machines.
4. The filesystem is not designed for interactive operations, instead, we prefer high throughput
over low latency.
5. Servers are distributed among racks and data centers, to ensure redundancy, and therefore
availability..
Properties areMeanModeMedianQuartilesPercentilesRan.pdf
Properties are:
Mean
Mode
Median
Quartiles
Percentiles
Range
Mean = Sum of values / n
Standard Variation = Sqrt( variance )
Variance = Sum ( X - Mean )^2 / n
Median = Middle Most Observation
Mode = Most Repeated Observation
Range = Maximum - Minimum
Solution
Properties are:
Mean
Mode
Median
Quartiles
Percentiles
Range
Mean = Sum of values / n
Standard Variation = Sqrt( variance )
Variance = Sum ( X - Mean )^2 / n
Median = Middle Most Observation
Mode = Most Repeated Observation
Range = Maximum - Minimum.
MgCO3 Increasing acidity will cause the following reaction Mg.pdf
MgCO3:
Increasing acidity will cause the following reaction:
MgCO3(s) + 2H+ ==> Mg(2+) + H2O + CO2(g)
and thus the solubility will increase.
AgI:
Increasing acidity will NOT affect the solubility.
CuS:
Increasing acidity will cause the following reaction:
CuS(s) + 2H+ ==> Cu(2+) + H2S(g)
and thus the solubility will increase.
PbBr2:
Increasing acidity will NOT affect the solubility.
Ba(OH)2
The solubility of Ba(OH)2 in water is only 5.6 g/100 g. By acidifying the solution, the following
reaction take place:
H+ + OH- ==> H2O
and thus [OH-] would drop, and thus Ba(OH)2 solubility would be increased.
Solution
MgCO3:
Increasing acidity will cause the following reaction:
MgCO3(s) + 2H+ ==> Mg(2+) + H2O + CO2(g)
and thus the solubility will increase.
AgI:
Increasing acidity will NOT affect the solubility.
CuS:
Increasing acidity will cause the following reaction:
CuS(s) + 2H+ ==> Cu(2+) + H2S(g)
and thus the solubility will increase.
PbBr2:
Increasing acidity will NOT affect the solubility.
Ba(OH)2
The solubility of Ba(OH)2 in water is only 5.6 g/100 g. By acidifying the solution, the following
reaction take place:
H+ + OH- ==> H2O
and thus [OH-] would drop, and thus Ba(OH)2 solubility would be increased..
Environmental conditions play a key role in defining the function an.pdf
Environmental conditions play a key role in defining the function and distribution of plants, in
combination with other factors. Changes in long term environmental conditions that can be
collectively coined climate change are known to have had enormous impacts on plant diversity
patterns in the future and are seen as having significant current impacts. It is predicted that
climate change will remain one of the major drivers of biodiversity patterns in the future.
The Earth has experienced a constantly changing climate in the time since plants first evolved. In
comparison to the present day, this history has seen Earth as cooler, warmer, drier and wetter,
and CO2 (carbon dioxide) concentrations have been both higher and lower. These changes have
been reflected by constantly shifting vegetation, for example forest communities dominating
most areas in interglacial periods, and herbaceous communities dominating during glacial
periods. It has been shown that past climatic change has been a major driver of the processes of
speciation and extinction. The best known example of this is the Carboniferous Rainforest
Collapse which occurred 350 million years ago. This event decimated amphibian populations
and spurred on the evolution of reptiles
Greenhouse effect - the mechanism
The sun radiates solar energy on earth. The larger part of this energy (45%) is radiated back into
space. Greenhouse gases in the atmosphere contribute to global warming by adsorption and
reflection of atmospheric and solar energy. This natural phenomenon is what we call the
greenhouse effect. It is agreed that the greenhouse effect is correlated with global temperature
change. The primary greenhouse gases in the Earth’s atmosphere are water vapor, carbon
dioxide, methane, nitrous oxide, and ozone
Mechanism of global warming:
i. The incoming radiation from the Sun is mostly in the form of visible light and nearby
wavelengths, largely in the range 0.2 – 4 1m, corresponding to the Sun’s radioactive temperature
of 6,000 K. Almost half the radiation is in the form of “visible” light, which our eyes are adapted
to use.
ii. About 50% of the Sun’s energy is absorbed at the earth’s surface and the rest is reflected or
absorbed by the atmosphere. The reflection of light back into space – largely by clouds – does
not much affect the basic mechanism; this light, effectively, is lost to the system.
iii (a) Earth absorbs most of the sunlight it receives; The absorbed energy warms the surface; (b)
Earth then emits the absorbed light’s energy as infrared light; (c) greenhouse gases absorb a lot
of the infrared light before it can leave our atmosphere; (d) being absorbed slows the rate at
which energy escapes to space; and (e) the slower passage of energy heats up the atmosphere,
water, and ground. By increasing the amount of greenhouse gases in the atmosphere, humans are
increasing the atmosphere’s absorption of infrared light, thereby warming Earth and disrupting
global climate patterns.
Effec.
1. Autralopith is a known genus of hominids which is extinct today..pdf
1. Autralopith is a known genus of hominids which is extinct today.
This can be A. biosei species. This genus dates back to 2.3-1.2 million years. Teeth and bones
examination is the major way to know what exactly is the age of the skeleton.
The proof of them being bipedal is that their foot imprints match to that of the present day
humans. Pelvis, femur and foot bones should be examined to confirm that the organism used to
walk bipedally.
Long arms and sloping fave are the ape like characters.
It was an adult. This can be known by examining the layers deposited on the body which may
come from volcanic eruption. Topmost layer and lowermost layers can be examined.
Solution
1. Autralopith is a known genus of hominids which is extinct today.
This can be A. biosei species. This genus dates back to 2.3-1.2 million years. Teeth and bones
examination is the major way to know what exactly is the age of the skeleton.
The proof of them being bipedal is that their foot imprints match to that of the present day
humans. Pelvis, femur and foot bones should be examined to confirm that the organism used to
walk bipedally.
Long arms and sloping fave are the ape like characters.
It was an adult. This can be known by examining the layers deposited on the body which may
come from volcanic eruption. Topmost layer and lowermost layers can be examined..
Mobile IP1) Mobile IP(MIP) is an Internet Engineering Task Force(.pdf
Mobile IP:
1) Mobile IP(MIP) is an Internet Engineering Task Force(IETF) standard communications
protocol.
2) This is designed to allow mobile device users to move from one network to another while
maintaining a permanent IP address.
3) Mobile IP for IPv4 is described in IETF RFC 5944 and extensions are defined in IETF RFC
4721.
4) Mobile IPv6 the IP mobility implementation for the next generation of the Internet Protocol
IPv6 is described in RFC 6275.
Advantages of using Mobile IP
• It allows fast, continuous lowcost access to corporate networks in remote areas where there
is no public telephone system or cellular coverage.
• It supports a wide range of applications from Internet access and email to ecommerce.
• Users can be permanently connected to their Internet provider and charged only for the data
packets that are sent and received.
• Lower equipment and utilization costs for those requiring reliable highspeed data connections
in remote locations worldwide.
• A user can take a palmtop or laptop computer anywhere without losing the connection to the
home network.
• Mobile IP finds local IP routers and connects automatically. It is phonejack and wirefree.
• Other than mobile nodes/routers, the remaining routers and hosts will still use current IP.
Mobile IP leaves transport and higher protocols
unaffected.
• Authentication is performed to ensure that rights are being protected.
• Mobile IP can move from one type of medium to another without losing connectivity. It is
unique in its ability to accommodate heterogeneous
mobility in addition to homogenous mobility.
Disadvantage of Mobile IP
• There is a routing inefficiency problem caused by the “triangle routing” formed by the home
agent, correspondent host and the foreign agent.
• Security risks are the most important problem facing Mobile IP. Besides the traditional security
risks with
IP, one has to worry about faked careof addresses.
• Another issue related to the security is how to make Mobile IP coexist with the security
features coming in
use within the Internet.
Characteristics of Mobile IP (Baseline Requirements)
• Compatibility: A new standard cannot require changes for applications or network protocols
already in use.
• Transparency: Mobility should remain “invisible” for many higher layer protocols and
applications.
• Scalability and efficiency: Introducing a new mechanism into the Internet must not degrade the
efficiency of the network.
• Security: All messages used to transmit information to another node about the location of a
mobile node must be authenticated to protect against remote redirection attacks
The Mobile IP in Wireless Networks
• new proposed standard of the IETF designed to support mobile users .
• new Internet standard for the Web and private networks.
• currently two standards one to support the current IPv4 one for the upcoming IPv6.
• One of the big requirements on the new standard is that it should support both ordinary and
wireless network
• The big issue is.
Answer1. Cells can generate many different tissue types endoderm,.pdf
Answer
1. Cells can generate many different tissue types: endoderm, mesoderm or ectoderm
2. Cells can generate any type of mesoderm tissue.
3. Cells can generate any type of muscle.
4. cells can generate heart muscle.
Solution
Answer
1. Cells can generate many different tissue types: endoderm, mesoderm or ectoderm
2. Cells can generate any type of mesoderm tissue.
3. Cells can generate any type of muscle.
4. cells can generate heart muscle..
3 a) The trace of an nSolution3 a) The trace of an n.pdf
The document discusses the trace of a matrix. The trace of an n x n matrix is defined as the sum of its diagonal entries. To find the trace, we add the entries along the main diagonal of the matrix from top left to bottom right. The trace provides some useful information about the matrix.
1. (a)In the late 20th century, mass media could be classified int.pdf
1. (a)
In the late 20th century, mass media could be classified into eight mass media industries: books,
the Internet, magazines, movies, newspapers, radio, recordings, and television. The explosion of
digital communication technology in the late 20th and early 21st centuries made prominent the
question: what forms of media should be classified as \"mass media\"? For example, it is
controversial whether to include cell phones, computer games (such as MMORPGs), and video
games in the definition. In the 2000s, a classification called the \"seven mass media\" became
popular. In order of introduction, they are:
Each mass medium has its own content types, creative artists, technicians, and business models.
For example, the Internet includes blogs, podcasts, web sites, and various other technologies
built atop the general distribution network. The sixth and seventh media, Internet and mobile
phones, are often referred to collectively as digital media; and the fourth and fifth, radio and TV,
as broadcast media. Some argue that video games have developed into a distinct mass form of
media.
While a telephone is a two-way communication device, mass media communicates to a large
group. In addition, the telephone has transformed into a cell phone which is equipped with
Internet access. A question arises whether this makes cell phones a mass medium or simply a
device used to access a mass medium (the Internet). There is currently a system by which
marketers and advertisers are able to tap into satellites, and broadcast commercials and
advertisements directly to cell phones, unsolicited by the phone\'s user. This transmission of
mass advertising to millions of people is another form of mass communication.
Video games may also be evolving into a mass medium. Video games (for example massively
multiplayer online role-playing games (MMORPGs, such as RuneScape) provide a common
gaming experience to millions of users across the globe and convey the same messages and
ideologies to all their users. Users sometimes share the experience with one another by playing
online. Excluding the Internet however, it is questionable whether players of video games are
sharing a common experience when they play the game individually. It is possible to discuss in
great detail the events of a video game with a friend one has never played with, because the
experience is identical to each. The question, then, is whether this is a form of mass
communication
Print
Magazine
A magazine is a periodical publication containing a variety of articles, generally financed by
advertising and/or purchase by readers.
Magazines are typically published weekly, biweekly, monthly, bimonthly or quarterly, with a
date on the cover that is in advance of the date it is actually published. They are often printed in
color on coated paper, and are bound with a soft cover.
Magazines fall into two broad categories: consumer magazines and business magazines. In
practice, magazines are a subset of periodicals,.
S2 AND S2 .pdf
This very short document contains a mathematical expression: S/2 AND S/2. It appears to be evaluating the logical AND of two expressions where S is divided by 2 in each case. However, without more context around S and its meaning, the essential information and high level meaning that can be summarized is limited to the mathematical expression itself.
It will make the value high because the water or .pdf
It will make the value high because the water or ethanol itself acts as a ligand.
Solution
It will make the value high because the water or ethanol itself acts as a ligand..
Keeping the concentration of H2 fixed, doubling t.pdf
Keeping the concentration of H2 fixed, doubling the concentration of ICl doubles
the rate. Keeping the concentration of ICl fixed, doubling the concentration of H2 quadruples the
rate. Hence, Rate = [H]^2[ICl]
Solution
Keeping the concentration of H2 fixed, doubling the concentration of ICl doubles
the rate. Keeping the concentration of ICl fixed, doubling the concentration of H2 quadruples the
rate. Hence, Rate = [H]^2[ICl].
b)In a spontaneous event, the change in entropy o.pdf
b)In a spontaneous event, the change in entropy of the universe can be negative
Solution
b)In a spontaneous event, the change in entropy of the universe can be negative.
A binary compound is a compound that consists of .pdf
A binary compound is a compound that consists of a combination of two elements.
Compounds that end in IDE indicate that they contain only two elements. The first element is
usually a positively charged metal, and the second element is usually a negatively charged
nonmetal. The positively charged ion is the name of the metal, while the negatively charged ion
consists of the stem plus the suffix IDE.
Solution
A binary compound is a compound that consists of a combination of two elements.
Compounds that end in IDE indicate that they contain only two elements. The first element is
usually a positively charged metal, and the second element is usually a negatively charged
nonmetal. The positively charged ion is the name of the metal, while the negatively charged ion
consists of the stem plus the suffix IDE..
How to Setup Warehouse & Location in Odoo 17 Inventory
In this slide, we'll explore how to set up warehouses and locations in Odoo 17 Inventory. This will help us manage our stock effectively, track inventory levels, and streamline warehouse operations.
Executive Directors Chat Leveraging AI for Diversity, Equity, and Inclusion
Let’s explore the intersection of technology and equity in the final session of our DEI series. Discover how AI tools, like ChatGPT, can be used to support and enhance your nonprofit's DEI initiatives. Participants will gain insights into practical AI applications and get tips for leveraging technology to advance their DEI goals.
The History of Stoke Newington Street Names
Presented at the Stoke Newington Literary Festival on 9th June 2024
www.StokeNewingtonHistory.com
More Related Content
More from anandhomeneeds
I think that 34SolutionI think that 34.pdf
This very short document does not provide enough context or information to generate a meaningful 3 sentence summary. It contains a statement about the number 34 but does not elaborate on the topic or point being discussed.
D(ANSWER)Polycrystalline or multicrystalline materials, or polycry.pdf
D(ANSWER)
Polycrystalline or multicrystalline materials, or polycrystals are solids that are composed of
many crystallites of varying size and orientation. Crystallites are also referred to as grains. They
are small or even microscopic crystals and form during the cooling of many materials. Their
orientation can be random with no preferred direction, called random texture, or directed,
possibly due to growth and processing conditions. Fiber texture is an example of the latter. The
areas where crystallite grains meet are known as grain boundaries.
Grain boundaries are interfaces where crystals of different orientations meet. A grain boundary is
a single-phase interface, with crystals on each side of the boundary being identical except in
orientation. The term \"crystallite boundary\" is sometimes, though rarely, used. Grain boundary
areas contain those atoms that have been perturbed from their original lattice sites, dislocations,
and impurities that have migrated to the lower energy grain boundary.
Treating a grain boundary geometrically as an interface of a single crystal cut into two parts, one
of which is rotated, we see that there are five variables required to define a grain boundary. The
first two numbers come from the unit vector that specifies a rotation axis. The third number
designates the angle of rotation of the grain. The final two numbers specify the plane of the grain
boundary (or a unit vector that is normal to this plane).
Grain boundaries disrupt the motion of dislocations through a material. Dislocation propagation
is impeded because of the stress field of the grain boundary defect region and the lack of slip
planes and slip directions and overall alignment across the boundaries. Reducing grain size is
therefore a common way to improve strength, often without any sacrifice in toughness because
the smaller grains create more obstacles per unit area of slip plane. This crystallite size-strength
relationship is given by the Hall-Petch relationship. The high interfacial energy and relatively
weak bonding in grain boundaries makes them preferred sites for the onset of corrosion and for
the precipitation of new phases from the solid.
Grain boundary migration plays an important role in many of the mechanisms of creep. Grain
boundary migration occurs when a shear stress acts on the grain boundary plane and causes the
grains to slide. This means that fine-grained materials actually have a poor resistance to creep
relative to coarser grains, especially at high temperatures, because smaller grains contain more
atoms in grain boundary sites. Grain boundaries also cause deformation in that they are sources
and sinks of point defects. Voids in a material tend to gather in a grain boundary, and if this
happens to a critical extent, the material could fracture.
During grain boundary migration, the rate determining step depends on the angle between two
adjacent grains. In a small angle dislocation boundary, the migration rate depends on vac.
1.It is the process of directing the television assistances are tran.pdf
1.It is the process of directing the television assistances are transported with the help of intrenet
protocol insdicating a packed switched network like local area network.
2.This iptv provides a power to bourn the media in tiny batches.moreover it provides a com-pell
alternative as a commanding method to appart the content whe help of digital rights
management.
3.Selecting a iptv lattice is depending upon the multiples containing service portfilo and network
investment .
4.super head end : It is brain of iptv system.this is the place where broadcasting channels are
received and transmited through the sources like fibre feeds,satelites.the video demand storage
content is present at this stage.
5.Coustmer premise equipement:It is joined with home wiring to produce the home network.it
contains a residential gate which is used to handle the control request from set top box.originally
the cost of home wiring is costly,service providers extremely prefers to rewire the homes at the
time of begining installation.
6.Core network: It is the middle part of a communication system offering a interconnection shift
between the boarder networks.it is utilized to offer a soloitary connection.
7.headend end :It is a slice of television system.modulators demodulators processors and
antennna....etc apparatus are used at this headend.
protocols:
1.This iptv layers on multicast ans unicast.the protocols that are utilized in iptv are as below.
1.service based provider streaming
2.web based unicast only live and vod
3.web based multicast live and unicast vod streaming
4.joined tv\'s set top boxes
Devices
The devices utilized in internet protocol telivision are as below
1.android
2.mobiles
3.smart tvs
4.spark
5.royal
6.sun price ................etc
Features specific to television services
1.Time shifting :A combo of iptv and digital video recorder allows the time shifting of
scheduling theme.
2.Personalization:End-to-end iptv methodology braces the bidirectional communicationa and
permits the end users to indidualize their tv watching atitude by permiting the users to mark as
per their mood and what they want to see.
3.bandwidth requirements:This iptv system supports as per the channel requested by user.hence
the iptv system allows the cable operators in order to preserve the bandwidth.
4.Support to interact tv:This iptv system offers two -way proficiency to perit the network
operators to carry a complete output interactive of tv applications like games,internet browsing.
Solution
1.It is the process of directing the television assistances are transported with the help of intrenet
protocol insdicating a packed switched network like local area network.
2.This iptv provides a power to bourn the media in tiny batches.moreover it provides a com-pell
alternative as a commanding method to appart the content whe help of digital rights
management.
3.Selecting a iptv lattice is depending upon the multiples containing service portfilo and network
investment .
4.super head en.
Answer The major objective of implementing a health information man.pdf
Answer: The major objective of implementing a health information management system is to
automate and streamline the process of capturing, processing, maintaining/storing, and analysing
the information related to health and health case. This information is just not related to one thing,
but covers many aspects and involves many stakeholders. It is related to patient\'s profile
(personal as well as medical), treatment prescribed to him/her, doctor\'s and health officials\'
profile, other relevant health records like details and results of various tests (if performed),
accounting, health related human resources among many other things.
Out of these, the most important part is - information related to patient\'s profile, treatment
prescribed, and other relevant health records. Collectively, this is termed as Electronic Health
Records (EHRs) which lies at the core of any HIMS. The nature and kind of information that is
present in EHRs is very personal and sensitive. Hence, ensuring security, privacy and
confidentiality of EHRs in HMIS should be utmost concern because if this information is
breached or comromised, its after-effects can be desasterous.
Hence, while implementing any HMIS, it is very critical to think of required and relevant
security and data protection mechanisms and make provisions for them into the system.
Solution
Answer: The major objective of implementing a health information management system is to
automate and streamline the process of capturing, processing, maintaining/storing, and analysing
the information related to health and health case. This information is just not related to one thing,
but covers many aspects and involves many stakeholders. It is related to patient\'s profile
(personal as well as medical), treatment prescribed to him/her, doctor\'s and health officials\'
profile, other relevant health records like details and results of various tests (if performed),
accounting, health related human resources among many other things.
Out of these, the most important part is - information related to patient\'s profile, treatment
prescribed, and other relevant health records. Collectively, this is termed as Electronic Health
Records (EHRs) which lies at the core of any HIMS. The nature and kind of information that is
present in EHRs is very personal and sensitive. Hence, ensuring security, privacy and
confidentiality of EHRs in HMIS should be utmost concern because if this information is
breached or comromised, its after-effects can be desasterous.
Hence, while implementing any HMIS, it is very critical to think of required and relevant
security and data protection mechanisms and make provisions for them into the system..
The key assumptions made by the Hadoop Distributed File System(HDFS).pdf
The key assumptions made by the Hadoop Distributed File System(HDFS) approach are:
1. High Volume: The volume of data in HDFS is expected to be really large, some like being
measured in terabytes or even petabytes.
2. High Availability: The cluster can contain thousands of file servers, and some of them may be
down(unavailable) at some given instance.
3. Reliable Communication: Communication is reliable among working machines.
4. The filesystem is not designed for interactive operations, instead, we prefer high throughput
over low latency.
5. Servers are distributed among racks and data centers, to ensure redundancy, and therefore
availability.
Solution
The key assumptions made by the Hadoop Distributed File System(HDFS) approach are:
1. High Volume: The volume of data in HDFS is expected to be really large, some like being
measured in terabytes or even petabytes.
2. High Availability: The cluster can contain thousands of file servers, and some of them may be
down(unavailable) at some given instance.
3. Reliable Communication: Communication is reliable among working machines.
4. The filesystem is not designed for interactive operations, instead, we prefer high throughput
over low latency.
5. Servers are distributed among racks and data centers, to ensure redundancy, and therefore
availability..
Properties areMeanModeMedianQuartilesPercentilesRan.pdf
Properties are:
Mean
Mode
Median
Quartiles
Percentiles
Range
Mean = Sum of values / n
Standard Variation = Sqrt( variance )
Variance = Sum ( X - Mean )^2 / n
Median = Middle Most Observation
Mode = Most Repeated Observation
Range = Maximum - Minimum
Solution
Properties are:
Mean
Mode
Median
Quartiles
Percentiles
Range
Mean = Sum of values / n
Standard Variation = Sqrt( variance )
Variance = Sum ( X - Mean )^2 / n
Median = Middle Most Observation
Mode = Most Repeated Observation
Range = Maximum - Minimum.
MgCO3 Increasing acidity will cause the following reaction Mg.pdf
MgCO3:
Increasing acidity will cause the following reaction:
MgCO3(s) + 2H+ ==> Mg(2+) + H2O + CO2(g)
and thus the solubility will increase.
AgI:
Increasing acidity will NOT affect the solubility.
CuS:
Increasing acidity will cause the following reaction:
CuS(s) + 2H+ ==> Cu(2+) + H2S(g)
and thus the solubility will increase.
PbBr2:
Increasing acidity will NOT affect the solubility.
Ba(OH)2
The solubility of Ba(OH)2 in water is only 5.6 g/100 g. By acidifying the solution, the following
reaction take place:
H+ + OH- ==> H2O
and thus [OH-] would drop, and thus Ba(OH)2 solubility would be increased.
Solution
MgCO3:
Increasing acidity will cause the following reaction:
MgCO3(s) + 2H+ ==> Mg(2+) + H2O + CO2(g)
and thus the solubility will increase.
AgI:
Increasing acidity will NOT affect the solubility.
CuS:
Increasing acidity will cause the following reaction:
CuS(s) + 2H+ ==> Cu(2+) + H2S(g)
and thus the solubility will increase.
PbBr2:
Increasing acidity will NOT affect the solubility.
Ba(OH)2
The solubility of Ba(OH)2 in water is only 5.6 g/100 g. By acidifying the solution, the following
reaction take place:
H+ + OH- ==> H2O
and thus [OH-] would drop, and thus Ba(OH)2 solubility would be increased..
Environmental conditions play a key role in defining the function an.pdf
Environmental conditions play a key role in defining the function and distribution of plants, in
combination with other factors. Changes in long term environmental conditions that can be
collectively coined climate change are known to have had enormous impacts on plant diversity
patterns in the future and are seen as having significant current impacts. It is predicted that
climate change will remain one of the major drivers of biodiversity patterns in the future.
The Earth has experienced a constantly changing climate in the time since plants first evolved. In
comparison to the present day, this history has seen Earth as cooler, warmer, drier and wetter,
and CO2 (carbon dioxide) concentrations have been both higher and lower. These changes have
been reflected by constantly shifting vegetation, for example forest communities dominating
most areas in interglacial periods, and herbaceous communities dominating during glacial
periods. It has been shown that past climatic change has been a major driver of the processes of
speciation and extinction. The best known example of this is the Carboniferous Rainforest
Collapse which occurred 350 million years ago. This event decimated amphibian populations
and spurred on the evolution of reptiles
Greenhouse effect - the mechanism
The sun radiates solar energy on earth. The larger part of this energy (45%) is radiated back into
space. Greenhouse gases in the atmosphere contribute to global warming by adsorption and
reflection of atmospheric and solar energy. This natural phenomenon is what we call the
greenhouse effect. It is agreed that the greenhouse effect is correlated with global temperature
change. The primary greenhouse gases in the Earth’s atmosphere are water vapor, carbon
dioxide, methane, nitrous oxide, and ozone
Mechanism of global warming:
i. The incoming radiation from the Sun is mostly in the form of visible light and nearby
wavelengths, largely in the range 0.2 – 4 1m, corresponding to the Sun’s radioactive temperature
of 6,000 K. Almost half the radiation is in the form of “visible” light, which our eyes are adapted
to use.
ii. About 50% of the Sun’s energy is absorbed at the earth’s surface and the rest is reflected or
absorbed by the atmosphere. The reflection of light back into space – largely by clouds – does
not much affect the basic mechanism; this light, effectively, is lost to the system.
iii (a) Earth absorbs most of the sunlight it receives; The absorbed energy warms the surface; (b)
Earth then emits the absorbed light’s energy as infrared light; (c) greenhouse gases absorb a lot
of the infrared light before it can leave our atmosphere; (d) being absorbed slows the rate at
which energy escapes to space; and (e) the slower passage of energy heats up the atmosphere,
water, and ground. By increasing the amount of greenhouse gases in the atmosphere, humans are
increasing the atmosphere’s absorption of infrared light, thereby warming Earth and disrupting
global climate patterns.
Effec.
1. Autralopith is a known genus of hominids which is extinct today..pdf
1. Autralopith is a known genus of hominids which is extinct today.
This can be A. biosei species. This genus dates back to 2.3-1.2 million years. Teeth and bones
examination is the major way to know what exactly is the age of the skeleton.
The proof of them being bipedal is that their foot imprints match to that of the present day
humans. Pelvis, femur and foot bones should be examined to confirm that the organism used to
walk bipedally.
Long arms and sloping fave are the ape like characters.
It was an adult. This can be known by examining the layers deposited on the body which may
come from volcanic eruption. Topmost layer and lowermost layers can be examined.
Solution
1. Autralopith is a known genus of hominids which is extinct today.
This can be A. biosei species. This genus dates back to 2.3-1.2 million years. Teeth and bones
examination is the major way to know what exactly is the age of the skeleton.
The proof of them being bipedal is that their foot imprints match to that of the present day
humans. Pelvis, femur and foot bones should be examined to confirm that the organism used to
walk bipedally.
Long arms and sloping fave are the ape like characters.
It was an adult. This can be known by examining the layers deposited on the body which may
come from volcanic eruption. Topmost layer and lowermost layers can be examined..
Mobile IP1) Mobile IP(MIP) is an Internet Engineering Task Force(.pdf
Mobile IP:
1) Mobile IP(MIP) is an Internet Engineering Task Force(IETF) standard communications
protocol.
2) This is designed to allow mobile device users to move from one network to another while
maintaining a permanent IP address.
3) Mobile IP for IPv4 is described in IETF RFC 5944 and extensions are defined in IETF RFC
4721.
4) Mobile IPv6 the IP mobility implementation for the next generation of the Internet Protocol
IPv6 is described in RFC 6275.
Advantages of using Mobile IP
• It allows fast, continuous lowcost access to corporate networks in remote areas where there
is no public telephone system or cellular coverage.
• It supports a wide range of applications from Internet access and email to ecommerce.
• Users can be permanently connected to their Internet provider and charged only for the data
packets that are sent and received.
• Lower equipment and utilization costs for those requiring reliable highspeed data connections
in remote locations worldwide.
• A user can take a palmtop or laptop computer anywhere without losing the connection to the
home network.
• Mobile IP finds local IP routers and connects automatically. It is phonejack and wirefree.
• Other than mobile nodes/routers, the remaining routers and hosts will still use current IP.
Mobile IP leaves transport and higher protocols
unaffected.
• Authentication is performed to ensure that rights are being protected.
• Mobile IP can move from one type of medium to another without losing connectivity. It is
unique in its ability to accommodate heterogeneous
mobility in addition to homogenous mobility.
Disadvantage of Mobile IP
• There is a routing inefficiency problem caused by the “triangle routing” formed by the home
agent, correspondent host and the foreign agent.
• Security risks are the most important problem facing Mobile IP. Besides the traditional security
risks with
IP, one has to worry about faked careof addresses.
• Another issue related to the security is how to make Mobile IP coexist with the security
features coming in
use within the Internet.
Characteristics of Mobile IP (Baseline Requirements)
• Compatibility: A new standard cannot require changes for applications or network protocols
already in use.
• Transparency: Mobility should remain “invisible” for many higher layer protocols and
applications.
• Scalability and efficiency: Introducing a new mechanism into the Internet must not degrade the
efficiency of the network.
• Security: All messages used to transmit information to another node about the location of a
mobile node must be authenticated to protect against remote redirection attacks
The Mobile IP in Wireless Networks
• new proposed standard of the IETF designed to support mobile users .
• new Internet standard for the Web and private networks.
• currently two standards one to support the current IPv4 one for the upcoming IPv6.
• One of the big requirements on the new standard is that it should support both ordinary and
wireless network
• The big issue is.
Answer1. Cells can generate many different tissue types endoderm,.pdf
Answer
1. Cells can generate many different tissue types: endoderm, mesoderm or ectoderm
2. Cells can generate any type of mesoderm tissue.
3. Cells can generate any type of muscle.
4. cells can generate heart muscle.
Solution
Answer
1. Cells can generate many different tissue types: endoderm, mesoderm or ectoderm
2. Cells can generate any type of mesoderm tissue.
3. Cells can generate any type of muscle.
4. cells can generate heart muscle..
3 a) The trace of an nSolution3 a) The trace of an n.pdf
The document discusses the trace of a matrix. The trace of an n x n matrix is defined as the sum of its diagonal entries. To find the trace, we add the entries along the main diagonal of the matrix from top left to bottom right. The trace provides some useful information about the matrix.
1. (a)In the late 20th century, mass media could be classified int.pdf
1. (a)
In the late 20th century, mass media could be classified into eight mass media industries: books,
the Internet, magazines, movies, newspapers, radio, recordings, and television. The explosion of
digital communication technology in the late 20th and early 21st centuries made prominent the
question: what forms of media should be classified as \"mass media\"? For example, it is
controversial whether to include cell phones, computer games (such as MMORPGs), and video
games in the definition. In the 2000s, a classification called the \"seven mass media\" became
popular. In order of introduction, they are:
Each mass medium has its own content types, creative artists, technicians, and business models.
For example, the Internet includes blogs, podcasts, web sites, and various other technologies
built atop the general distribution network. The sixth and seventh media, Internet and mobile
phones, are often referred to collectively as digital media; and the fourth and fifth, radio and TV,
as broadcast media. Some argue that video games have developed into a distinct mass form of
media.
While a telephone is a two-way communication device, mass media communicates to a large
group. In addition, the telephone has transformed into a cell phone which is equipped with
Internet access. A question arises whether this makes cell phones a mass medium or simply a
device used to access a mass medium (the Internet). There is currently a system by which
marketers and advertisers are able to tap into satellites, and broadcast commercials and
advertisements directly to cell phones, unsolicited by the phone\'s user. This transmission of
mass advertising to millions of people is another form of mass communication.
Video games may also be evolving into a mass medium. Video games (for example massively
multiplayer online role-playing games (MMORPGs, such as RuneScape) provide a common
gaming experience to millions of users across the globe and convey the same messages and
ideologies to all their users. Users sometimes share the experience with one another by playing
online. Excluding the Internet however, it is questionable whether players of video games are
sharing a common experience when they play the game individually. It is possible to discuss in
great detail the events of a video game with a friend one has never played with, because the
experience is identical to each. The question, then, is whether this is a form of mass
communication
Print
Magazine
A magazine is a periodical publication containing a variety of articles, generally financed by
advertising and/or purchase by readers.
Magazines are typically published weekly, biweekly, monthly, bimonthly or quarterly, with a
date on the cover that is in advance of the date it is actually published. They are often printed in
color on coated paper, and are bound with a soft cover.
Magazines fall into two broad categories: consumer magazines and business magazines. In
practice, magazines are a subset of periodicals,.
S2 AND S2 .pdf
This very short document contains a mathematical expression: S/2 AND S/2. It appears to be evaluating the logical AND of two expressions where S is divided by 2 in each case. However, without more context around S and its meaning, the essential information and high level meaning that can be summarized is limited to the mathematical expression itself.
It will make the value high because the water or .pdf
It will make the value high because the water or ethanol itself acts as a ligand.
Solution
It will make the value high because the water or ethanol itself acts as a ligand..
Keeping the concentration of H2 fixed, doubling t.pdf
Keeping the concentration of H2 fixed, doubling the concentration of ICl doubles
the rate. Keeping the concentration of ICl fixed, doubling the concentration of H2 quadruples the
rate. Hence, Rate = [H]^2[ICl]
Solution
Keeping the concentration of H2 fixed, doubling the concentration of ICl doubles
the rate. Keeping the concentration of ICl fixed, doubling the concentration of H2 quadruples the
rate. Hence, Rate = [H]^2[ICl].
b)In a spontaneous event, the change in entropy o.pdf
b)In a spontaneous event, the change in entropy of the universe can be negative
Solution
b)In a spontaneous event, the change in entropy of the universe can be negative.
A binary compound is a compound that consists of .pdf
A binary compound is a compound that consists of a combination of two elements.
Compounds that end in IDE indicate that they contain only two elements. The first element is
usually a positively charged metal, and the second element is usually a negatively charged
nonmetal. The positively charged ion is the name of the metal, while the negatively charged ion
consists of the stem plus the suffix IDE.
Solution
A binary compound is a compound that consists of a combination of two elements.
Compounds that end in IDE indicate that they contain only two elements. The first element is
usually a positively charged metal, and the second element is usually a negatively charged
nonmetal. The positively charged ion is the name of the metal, while the negatively charged ion
consists of the stem plus the suffix IDE..
More from anandhomeneeds (18)
D(ANSWER)Polycrystalline or multicrystalline materials, or polycry.pdf
D(ANSWER)Polycrystalline or multicrystalline materials, or polycry.pdf
1.It is the process of directing the television assistances are tran.pdf
1.It is the process of directing the television assistances are tran.pdf
Answer The major objective of implementing a health information man.pdf
Answer The major objective of implementing a health information man.pdf
The key assumptions made by the Hadoop Distributed File System(HDFS).pdf
The key assumptions made by the Hadoop Distributed File System(HDFS).pdf
Properties areMeanModeMedianQuartilesPercentilesRan.pdf
Properties areMeanModeMedianQuartilesPercentilesRan.pdf
MgCO3 Increasing acidity will cause the following reaction Mg.pdf
MgCO3 Increasing acidity will cause the following reaction Mg.pdf
Environmental conditions play a key role in defining the function an.pdf
Environmental conditions play a key role in defining the function an.pdf
1. Autralopith is a known genus of hominids which is extinct today..pdf
1. Autralopith is a known genus of hominids which is extinct today..pdf
Mobile IP1) Mobile IP(MIP) is an Internet Engineering Task Force(.pdf
Mobile IP1) Mobile IP(MIP) is an Internet Engineering Task Force(.pdf
Answer1. Cells can generate many different tissue types endoderm,.pdf
Answer1. Cells can generate many different tissue types endoderm,.pdf
3 a) The trace of an nSolution3 a) The trace of an n.pdf
3 a) The trace of an nSolution3 a) The trace of an n.pdf
1. (a)In the late 20th century, mass media could be classified int.pdf
1. (a)In the late 20th century, mass media could be classified int.pdf
It will make the value high because the water or .pdf
It will make the value high because the water or .pdf
Keeping the concentration of H2 fixed, doubling t.pdf
Keeping the concentration of H2 fixed, doubling t.pdf
b)In a spontaneous event, the change in entropy o.pdf
b)In a spontaneous event, the change in entropy o.pdf
A binary compound is a compound that consists of .pdf
A binary compound is a compound that consists of .pdf
Recently uploaded
How to Setup Warehouse & Location in Odoo 17 Inventory
In this slide, we'll explore how to set up warehouses and locations in Odoo 17 Inventory. This will help us manage our stock effectively, track inventory levels, and streamline warehouse operations.
Executive Directors Chat Leveraging AI for Diversity, Equity, and Inclusion
Let’s explore the intersection of technology and equity in the final session of our DEI series. Discover how AI tools, like ChatGPT, can be used to support and enhance your nonprofit's DEI initiatives. Participants will gain insights into practical AI applications and get tips for leveraging technology to advance their DEI goals.
The History of Stoke Newington Street Names
Presented at the Stoke Newington Literary Festival on 9th June 2024
www.StokeNewingtonHistory.com
The Diamonds of 2023-2024 in the IGRA collection
A review of the growth of the Israel Genealogy Research Association Database Collection for the last 12 months. Our collection is now passed the 3 million mark and still growing. See which archives have contributed the most. See the different types of records we have, and which years have had records added. You can also see what we have for the future.
PCOS corelations and management through Ayurveda.
This presentation includes basic of PCOS their pathology and treatment and also Ayurveda correlation of PCOS and Ayurvedic line of treatment mentioned in classics.
BBR 2024 Summer Sessions Interview Training
Qualitative research interview training by Professor Katrina Pritchard and Dr Helen Williams
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Ab...
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Aberdeen
Community pharmacy- Social and preventive pharmacy UNIT 5
Covered community pharmacy topic of the subject Social and preventive pharmacy for Diploma and Bachelor of pharmacy
Main Java[All of the Base Concepts}.docx
This is part 1 of my Java Learning Journey. This Contains Custom methods, classes, constructors, packages, multithreading , try- catch block, finally block and more.
Advanced Java[Extra Concepts, Not Difficult].docx
This is part 2 of my Java Learning Journey. This contains Hashing, ArrayList, LinkedList, Date and Time Classes, Calendar Class and more.
How to Manage Your Lost Opportunities in Odoo 17 CRM
Odoo 17 CRM allows us to track why we lose sales opportunities with "Lost Reasons." This helps analyze our sales process and identify areas for improvement. Here's how to configure lost reasons in Odoo 17 CRM
How to Add Chatter in the odoo 17 ERP Module
In Odoo, the chatter is like a chat tool that helps you work together on records. You can leave notes and track things, making it easier to talk with your team and partners. Inside chatter, all communication history, activity, and changes will be displayed.
DRUGS AND ITS classification slide share
Any substance (other than food) that is used to prevent, diagnose, treat, or relieve symptoms of a
disease or abnormal condition
How to Make a Field Mandatory in Odoo 17
In Odoo, making a field required can be done through both Python code and XML views. When you set the required attribute to True in Python code, it makes the field required across all views where it's used. Conversely, when you set the required attribute in XML views, it makes the field required only in the context of that particular view.
বাংলাদেশ অর্থনৈতিক সমীক্ষা (Economic Review) ২০২৪ UJS App.pdf
বাংলাদেশের অর্থনৈতিক সমীক্ষা ২০২৪ [Bangladesh Economic Review 2024 Bangla.pdf] কম্পিউটার , ট্যাব ও স্মার্ট ফোন ভার্সন সহ সম্পূর্ণ বাংলা ই-বুক বা pdf বই " সুচিপত্র ...বুকমার্ক মেনু 🔖 ও হাইপার লিংক মেনু 📝👆 যুক্ত ..
আমাদের সবার জন্য খুব খুব গুরুত্বপূর্ণ একটি বই ..বিসিএস, ব্যাংক, ইউনিভার্সিটি ভর্তি ও যে কোন প্রতিযোগিতা মূলক পরীক্ষার জন্য এর খুব ইম্পরট্যান্ট একটি বিষয় ...তাছাড়া বাংলাদেশের সাম্প্রতিক যে কোন ডাটা বা তথ্য এই বইতে পাবেন ...
তাই একজন নাগরিক হিসাবে এই তথ্য গুলো আপনার জানা প্রয়োজন ...।
বিসিএস ও ব্যাংক এর লিখিত পরীক্ষা ...+এছাড়া মাধ্যমিক ও উচ্চমাধ্যমিকের স্টুডেন্টদের জন্য অনেক কাজে আসবে ...
The simplified electron and muon model, Oscillating Spacetime: The Foundation...
Discover the Simplified Electron and Muon Model: A New Wave-Based Approach to Understanding Particles delves into a groundbreaking theory that presents electrons and muons as rotating soliton waves within oscillating spacetime. Geared towards students, researchers, and science buffs, this book breaks down complex ideas into simple explanations. It covers topics such as electron waves, temporal dynamics, and the implications of this model on particle physics. With clear illustrations and easy-to-follow explanations, readers will gain a new outlook on the universe's fundamental nature.
Recently uploaded (20)
How to Setup Warehouse & Location in Odoo 17 Inventory
How to Setup Warehouse & Location in Odoo 17 Inventory
Executive Directors Chat Leveraging AI for Diversity, Equity, and Inclusion
Executive Directors Chat Leveraging AI for Diversity, Equity, and Inclusion
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Ab...
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Ab...
Community pharmacy- Social and preventive pharmacy UNIT 5
Community pharmacy- Social and preventive pharmacy UNIT 5
How to Manage Your Lost Opportunities in Odoo 17 CRM
How to Manage Your Lost Opportunities in Odoo 17 CRM
বাংলাদেশ অর্থনৈতিক সমীক্ষা (Economic Review) ২০২৪ UJS App.pdf
বাংলাদেশ অর্থনৈতিক সমীক্ষা (Economic Review) ২০২৪ UJS App.pdf
The simplified electron and muon model, Oscillating Spacetime: The Foundation...
The simplified electron and muon model, Oscillating Spacetime: The Foundation...
The answer is C. securin.APC degrade securin to release separase .pdf
- 1. The answer is: C. securin. APC degrade securin to release separase which degrades cohesin. Solution The answer is: C. securin. APC degrade securin to release separase which degrades cohesin.