【DLゼミ】XFeat: Accelerated Features for Lightweight Image Matchingharmonylab
公開URL:https://arxiv.org/pdf/2404.19174
出典:Guilherme Potje, Felipe Cadar, Andre Araujo, Renato Martins, Erickson R. ascimento: XFeat: Accelerated Features for Lightweight Image Matching, Proceedings of the 2024 IEEE/CVF Conference on Computer Vision and Pattern Recognition (CVPR) (2023)
概要:リソース効率に優れた特徴点マッチングのための軽量なアーキテクチャ「XFeat(Accelerated Features)」を提案します。手法は、局所的な特徴点の検出、抽出、マッチングのための畳み込みニューラルネットワークの基本的な設計を再検討します。特に、リソースが限られたデバイス向けに迅速かつ堅牢なアルゴリズムが必要とされるため、解像度を可能な限り高く保ちながら、ネットワークのチャネル数を制限します。さらに、スパース下でのマッチングを選択できる設計となっており、ナビゲーションやARなどのアプリケーションに適しています。XFeatは、高速かつ同等以上の精度を実現し、一般的なラップトップのCPU上でリアルタイムで動作します。
セル生産方式におけるロボットの活用には様々な問題があるが,その一つとして 3 体以上の物体の組み立てが挙げられる.一般に,複数物体を同時に組み立てる際は,対象の部品をそれぞれロボットアームまたは治具でそれぞれ独立に保持することで組み立てを遂行すると考えられる.ただし,この方法ではロボットアームや治具を部品数と同じ数だけ必要とし,部品数が多いほどコスト面や設置スペースの関係で無駄が多くなる.この課題に対して音𣷓らは組み立て対象物に働く接触力等の解析により,治具等で固定されていない対象物が組み立て作業中に運動しにくい状態となる条件を求めた.すなわち,環境中の非把持対象物のロバスト性を考慮して,組み立て作業条件を検討している.本研究ではこの方策に基づいて,複数物体の組み立て作業を単腕マニピュレータで実行することを目的とする.このとき,対象物のロバスト性を考慮することで,仮組状態の複数物体を同時に扱う手法を提案する.作業対象としてパイプジョイントの組み立てを挙げ,簡易な道具を用いることで単腕マニピュレータで複数物体を同時に把持できることを示す.さらに,作業成功率の向上のために RGB-D カメラを用いた物体の位置検出に基づくロボット制御及び動作計画を実装する.
This paper discusses assembly operations using a single manipulator and a parallel gripper to simultaneously
grasp multiple objects and hold the group of temporarily assembled objects. Multiple robots and jigs generally operate
assembly tasks by constraining the target objects mechanically or geometrically to prevent them from moving. It is
necessary to analyze the physical interaction between the objects for such constraints to achieve the tasks with a single
gripper. In this paper, we focus on assembling pipe joints as an example and discuss constraining the motion of the
objects. Our demonstration shows that a simple tool can facilitate holding multiple objects with a single gripper.
10. 10
各国キャリアの抱える問題と参加の動機
垂直統合
トレーニング
システム開発
North API
South API
• Performance Monitoring
• Boot loading
• Version up
• Configuration
• Design tool
• Provisioning tool
etc.
• 光伝送装置は垂直統合モデルであり、ベンダごとにトレーニング
コストやシステム開発コストがかかっている
Network
Equipment H/W
Operating
System
S/W for
Equipment
Operating
experts
Network
Equipment H/W
Operating
System
S/W for
Equipment
Operating
experts
Vendor A Vendor B
• オペレーション共通化のため、共通APIを定義したりインハウスの
アプリを実装することが難しい
18. 18
「オープントランスポート」のためのアーキテクチャ
Open Transport
Manager
Realtime OS
Transport Chassis
: ベンダー独自
Line
card
Card API
Open H/WFPGA FPGA
DSP DSP
Switch
ASIC
X86
Open Kernel
Switch SDK Transport SDK
SAI TAI
Open Switch
Manager
Transport Manager
SDN
Controller
: オープンS/W H/W
North API North API
South API
Netconf/Yang
Open
Controller
Any
Missing parts
South API
• OSSをサポート: サーバベースのアーキテクチャ、
コンテナオーケストレーションのようなアプリを
用いて柔軟な実装を可能に
• オープントランスポート API: デバイスへのアク
セスを可能に
Conventional Transponder Whitebox Packet Transponder
(Line side)
19. 19
Transponder Abstraction Interface
• NTTはホワイトボックスパケットトランスポンダのハードとソフトを分離するため、
グローバルパートナと協力しTransponder Abstraction Interface (TAI)を推進
Libtai.so
(for vendor A)
Libtai.so
(for vendor B gen1)
Libtai.so
(for vendor B gen2)
TAI Open interface on Github
provided by each vendor
✓ フォームファクタの違いや複雑さを隠蔽
✓ モジュールのマルチベンダ対応
✓ メジャーなNOSが採用
✓ 開発コスト削減
✓ ベンダ独自オプション可
• TAIは、ベンダが独自機能を実装できる余地を残しつつ、ベンダ間に残る開発の冗長
性を取り除く