Magma Polymers Pvt Ltd produces a 12.8 micron metallised polyester film coated with primer for UV offset printing and gold packaging. The film has good adhesion of the print primer to the polyester side and good lamination bond strength. It provides excellent printability and high gloss in gold color, making it suitable for boxes and labels. The film has high optical density, good coating uniformity and winding quality with minimal defects. Rolls are securely packed for protection during transit.

1. MAGMA POLYMERS PVT LTD.
C-14, MIDC AMBAD, NASHIK – 422010
Ph: +91-0253-2382678/6601208/6601209 Fax: +91-0253-2385339
Email: magmapolymerspvtltd@gmail.com, admin@magmapolymers.in
Product Metallised and Coated Polyester film, HT-11 Gold
Description PET coated with Primer for UV-offset printing and gold packaging.
Normal density metallised bi-axially oriented polyester film and metallised on corona
surface to enhance the metal adhesion and other side coated with HT-11 GOLD for
Ink Adhesion.
Application Good printability and high gloss in gold colour used for boxes and labels.
Salient Features Good adhesion of Print primer on polyester side. Good Lamination Bond Strength.
Excellent machinability. High resolution printing by UV off-set process
Physical Properties
Nominal thickness:
12.8microns
Average yield: 55-57 sq meters/kg
Optical Density: 2.1 +- 5% (Jindal standard)
Wetting Tension, Dynes/cm: Metal side: 54, Film side 40 (ASTM D 2578)
Adhesion/Bond strength: Very good with tape test, cross hatch.
Coating Uniformity : Uniform ,no visible defects
Winding quality: Wrinkles, Creases are absent, one or two pin holes in
1000 metres observed.
Joints, if any are flagged and mentioned in the
packing slip.
Core ID: 6 inches , Metal side outside of the rolls
Packing: The rolls are wrapped in stretch wrap film, followed
by Bubble film and over wrapped in
corrugated sheets .Edges and sides protected
by bubble film. The rolls are left to stand
on plywood fitments and core plugs are strapped for
protection in transit.