SBR Binder for Lithium-ion Battery Manufacturing Targray
Targray modified Styrene-Butadiene Copolymer (SBR Binder) is a hydrophilic binder used in the production of lithium-ion batteries. This li-ion battery anode material is the primary aqueous binder used in the manufacturing of lithium-ion batteries.
PP Battery Separator for Lithium-Ion Battery ManufacturingTargray
Targray polypropylene battery separators are used in the development of lithium-ion batteries. Li-ion battery manufacturers use PP separators for ion transportation within the battery cell.
Compound Carbon Powder for Li-ion Battery ManufacturingTargray
Targray compound carbon powder is an active anode material used in lithium-ion battery manufacturing. This modified special compound artificial graphite with high-rate capabilities has excellent machinability and cycle performance.
Ceramic Coated Separator for Lithium-Ion BatteriesTargray
Targray ceramic coated separators are used by li-ion battery manufacturers to maximize lithium-ion battery cell performance. For more information visit www.targray.com
Bi-axially oriented Poly polypropylene films JayaVerma28
This presentation is about Bi-axially oriented poly - polypropylene films, it describes about its properties, processing parameters, methods, industrial manufacturing, Applications, advantages, disadvantages and references are added at the end.
SBR Binder for Lithium-ion Battery Manufacturing Targray
Targray modified Styrene-Butadiene Copolymer (SBR Binder) is a hydrophilic binder used in the production of lithium-ion batteries. This li-ion battery anode material is the primary aqueous binder used in the manufacturing of lithium-ion batteries.
PP Battery Separator for Lithium-Ion Battery ManufacturingTargray
Targray polypropylene battery separators are used in the development of lithium-ion batteries. Li-ion battery manufacturers use PP separators for ion transportation within the battery cell.
Compound Carbon Powder for Li-ion Battery ManufacturingTargray
Targray compound carbon powder is an active anode material used in lithium-ion battery manufacturing. This modified special compound artificial graphite with high-rate capabilities has excellent machinability and cycle performance.
Ceramic Coated Separator for Lithium-Ion BatteriesTargray
Targray ceramic coated separators are used by li-ion battery manufacturers to maximize lithium-ion battery cell performance. For more information visit www.targray.com
Bi-axially oriented Poly polypropylene films JayaVerma28
This presentation is about Bi-axially oriented poly - polypropylene films, it describes about its properties, processing parameters, methods, industrial manufacturing, Applications, advantages, disadvantages and references are added at the end.
This topic describes the Technical data of carbon fiber plate.
For more question,please visit our page: www.xccarbonfiber.com
Or contact us at: info@xccarbon.com
Find out insulation mica tape, cable mica tape, synthetic mica tape, fireproof mica tape at Shenglongpan in China, professional manufacturers of Mica Tape.
Sterimed Group - Manufacturers & Suppliers Transparent Perforated Plastic Fil...Sterimed Group
Made from perforated plastic film for good breathability. Uniformly coated with hypoallergenic adhesive. Strong adhesion water resistant. Painless removal. Perfect bidirectional tearing
Towards aligning pedagogy, space and technology inside a large-scale learning...Dr Wayne Barry
This is a presentation that was given at the Society for Research into Higher Education (SRHE) Newer Researchers’ Conference 2011: New communities, spaces and places: inspiring futures for higher education, 6-7 December 2011, Celtic Manor Resort, Newport, Wales.
The presentation outlines some of the findings from my year long master’s research project. The study revealed that both tutors and students experienced ‘troublesome space’, but in very different ways. For tutors, the learning spaces, if not fully understood or appropriately planned for, presented risks and challenges to their teaching practices. For students, it was not always clear what they could or could not do within a particular space.
Furthermore, evidence suggests that influencing students’ attitudes could engage them in using the learning environment more. However, students placed a high premium on ‘silent spaces’ (Beard, 2009) suggesting that policy makers and planners may need to consider the right balance between social and private spaces.
Finally, it proposes a conceptual model which illustrates the alignment of pedagogy, space and technology with the learner situated at its heart.
This topic describes the Technical data of carbon fiber plate.
For more question,please visit our page: www.xccarbonfiber.com
Or contact us at: info@xccarbon.com
Find out insulation mica tape, cable mica tape, synthetic mica tape, fireproof mica tape at Shenglongpan in China, professional manufacturers of Mica Tape.
Sterimed Group - Manufacturers & Suppliers Transparent Perforated Plastic Fil...Sterimed Group
Made from perforated plastic film for good breathability. Uniformly coated with hypoallergenic adhesive. Strong adhesion water resistant. Painless removal. Perfect bidirectional tearing
Towards aligning pedagogy, space and technology inside a large-scale learning...Dr Wayne Barry
This is a presentation that was given at the Society for Research into Higher Education (SRHE) Newer Researchers’ Conference 2011: New communities, spaces and places: inspiring futures for higher education, 6-7 December 2011, Celtic Manor Resort, Newport, Wales.
The presentation outlines some of the findings from my year long master’s research project. The study revealed that both tutors and students experienced ‘troublesome space’, but in very different ways. For tutors, the learning spaces, if not fully understood or appropriately planned for, presented risks and challenges to their teaching practices. For students, it was not always clear what they could or could not do within a particular space.
Furthermore, evidence suggests that influencing students’ attitudes could engage them in using the learning environment more. However, students placed a high premium on ‘silent spaces’ (Beard, 2009) suggesting that policy makers and planners may need to consider the right balance between social and private spaces.
Finally, it proposes a conceptual model which illustrates the alignment of pedagogy, space and technology with the learner situated at its heart.
The Chamber of Fear: A Role Playing Approach to the Recruitment and Selection...Dr Wayne Barry
This is a presentation that was given at the Association for Learning Technology (ALT) Annual Conference 2015: Shaping the Future of Learning Toegther, 8-10 September 2015, University of Manchester, Manchester, UK.
This short presentation by Wayne Barry and Simon Starr will report on the challenges and opportunities of adopting a role-playing approach in the recruitment and selection of learning technologists. It will outline a method for identifying potential candidates who are able to shape the future of learning and influence the development of learning technologies in partnership with students and staff.
Abstract: https://altc.alt.ac.uk/2015/sessions/the-chamber-of-fear-a-role-playing-approach-to-the-recruitment-and-selection-of-learning-technologists-824/
The Learner, the Curriculum and the WardrobeDr Wayne Barry
The workshop ran as part of the Learning & Teaching Conference at Canterbury Christ Church University on Monday 30th June 2014. It was co-presented with Lynne Burroughs and sets out to examine and present examples of how e-portfolios (the ‘wardrobe’ of the title) can be embedded within the curriculum, thus allowing students to demonstrate the development of their skills and learning across a range of personal, academic and professional touch points. Furthermore, it is envisaged that e-portfolios could enable students to become 21st century self-reflective practitioners, a critical graduate skill, and to develop ‘multiple voices’ that are suitable for different audiences.
Delegates were asked to consider how e-portfolios could be situated within their own subject and professional disciplines and discuss the opportunities and challenges in embedding such a tool within their own curriculum.
A Normal polypropylene(BOPP film) coated with acrylic adhesion glue tape.
It has been extensively used for the box sealing, objective fixing, fastening and sticking.it is a staple for the special purpose carton sealing, art design, gift packaging, mass fashion pocket closing etc. It is of wide use too.
bopp packing tape suitable for general carton sealing, auto-packing machine and gift wrapping and decoration.
A Normal polypropylene(BOPP film) coated with acrylic adhesion glue tape.
It has been extensively used for the box sealing, objective fixing, fastening and sticking.it is a staple for the special purpose carton sealing, art design, gift packaging, mass fashion pocket closing etc. It is of wide use too.
Suitable for general carton sealing, auto-packing machine and gift wrapping and decoration.
1. ®
MAGMA POLYMERS PVT LTD.MAGMA POLYMERS PVT LTD.MAGMA POLYMERS PVT LTD.MAGMA POLYMERS PVT LTD.
C-14, MIDC AMBAD, NASHIK – 422010
Ph: +91-0253-6601208/6601209
Email: magmapolymerspvtltd@gmail.com, admin@magmapolymers.in
Product Coated BOPP film for Embossing, HE-01
Description This a BOPP film specially created for developing a
Holographic Pattern on the film by Embossing
Principle.
Application Suitable for low temperature embossing of BOPP
film with high gloss and adhesion. Can be supplied in
colours, primarily for gift wraps.
Salient Features Very low embossing temperature suitable for BOPP.
Very good gloss on BOPP
Very good Adhesion on BOPP for further processing.
Consistency and repeatability.
Physical Properties
Nominal thickness: 15/23 mic.
Average yield: As per standard
Optical Density: NA
Surface Tension: Coated side, 38-40 dynes
Adhesion/Bond strength: Satisfactory
Coating Uniformity : Good
Winding quality: Soft
Core ID: As per customer needs
Packing: As per customer specifications