The SX-SDMAN is an 802.11a/b/g/n plus Bluetooth 4.0 radio/baseband SDIO Module designed specifically for low power embedded applications. Top Features: High performance single stream dual band SDIO module with 802.11 a/b/g/n WLAN plus BT 4.0 Atheros AR6233 System in Package (SIP) based design integrated with on-board Front End Module Supports industry leading security including Cisco CCXv4 ASD, WPS, and WEP/WPA/WPA2 FCC/TELEC modular certification Optional Tx/Rx antenna selection diversity Applications: The SX-SDMAN is for low power / battery operated devices like portable medical devices, industrial tablet devices, barcode scanners, mobile printers, and many more. It integrates both WLAN and BT functionality in a single board design to provide a cost-effective WiFi and Bluetooth co-existence implementation. The SX-SDMAN brings 802.11n throughput, range and power efficiency to portable devices including patient monitors, printers, handheld terminals and more. Features and Benefits: IEEE 802.11a/b/g/n conformity (2.4 GHz & 5 GHz) Single stream 1 x 1 SISO technology and 40 MHz bandwidth mode for 5 GHz Data rates of 1 - 54 Mbps for 802.11b/g, 6 - 54 Mbps for 802.11a and 6.5 - 135 Mbps for 802.11n Supports IEEE 802.11e, IEEE 802.11h and IEEE 802.11i Supports SDIO 2.0 as host IF of wireless LAN Optionally supports Tx/Rx software selection diversity for wireless LAN mode Supports Bluetooth 4.0 + LE dual mode Supports TDMA Wi-Fi/Bluetooth coexistence Supports UART and USB as the host IF of Bluetooth Calibrated Tx Power per module FCC/IC/ETSI/TELEC modular certi­fication Connector mount and surface mount versions

1. SX-SDMAN-2830C / SX-SDMAN-2830S
Chipset
Host Interface
Baseband Specifications
Operating Temperature
SDIO V 2.0 (4-bit, 1-bit)
Qualcomm Atheros AR6233
3.30 VDC +/- 5%
Diagram:
Specifications:
Radio Specifications 802.11b/g/n 2.412 - 2.484 GHz
802.11a/n 5.18 - 5.825 GHz
Connector Mount Dimensions 24.0 x 24.0 x 4.4 mm (W x H x D)
Surface Mount Dimensions
Key Features:
-10 to +70 degrees C
CSMA/CA media access; DSSS, OFDM
Bluetooth Specifications
Product Name
Operating Voltage
BT3.0+HS, BT4.0, Class 1.5
19.0 x 22.0 x 2.2 mm (W x H x D)
SX-SDMAN
802.11a/b/g/n Plus Bluetooth SDIO Module
The Silex SX-SDMAN is a dual-band 802.11a/b/g/n plus Bluetooth
SDIO module that is based on the SX-SDPAN (Qualcomm Atheros
AR6233). The SX-SDMAN brings 802.11n throughput, range and
power efficiency to portable devices including patient monitors,
printers, handheld terminals and more.
The SX-SDMAN integrates an external 5 GHz Front End Module
(FEM) and is pre-tuned for the most optimized dual-band WLAN
performance. The radio module design approach also saves cost as
the SX-SDMAN provides FCC/IC/ETSI/TELEC modular certification.
The SX-SDMAN provides superior product quality. Silex has
validated that our design meets IEEE standards and each module is
individually tested during the production process. This ensures that
each of our products will perform to our published specification.
In order to expedite your product development process, Silex
can provide both hardware and software engineering services
including custom driver development, as well as turnkey product
design and manufacturing.
• IEEE 802.11a/b/g/n conformity (2.4 GHz & 5 GHz)
• Single stream 1 x 1 SISO technology and 40 MHz bandwidth
mode for 5 GHz
• Data rates of 1 - 54 Mbps for 802.11b/g, 6 - 54 Mbps for 802.11a
and 6.5 - 135 Mbps for 802.11n
• Supports IEEE 802.11e, IEEE 802.11h and IEEE 802.11i
• Supports SDIO 2.0 as host IF of wireless LAN
• Supports Bluetooth 4.0 + LE dual mode
• Supports TDMA Wi-Fi/Bluetooth coexistence
• Supports UART and USB as the host IF of Bluetooth
• Calibrated Tx Power per module
• FCC/IC/ETSI/TELEC modular certification
• Connector mount and surface mount versions
PN: 141-00207-130
REV C. 20131230
Wireless LAN Module for Mobile Devices with Enterprise Reliability

2. Communications: SDIO 2.0
Supported Data Rates:
IEEE 802.11b 1-11 Mbps
IEEE 802.11g 6-54 Mbps
IEEE 802.11a 6-54 Mbps
IEEE 802.11n HT20 6.5 - 65.0 Mbps
IEEE 802.11n HT40 13.5 - 135.0 Mbps
Bluetooth: BDR/EDR/LE
Physical Specifications:
Connector Mount: 24.0 x 24.0 x 4.4 mm (W x H x D)
Surface Mount: 19.0 x 22.0 x 2.2 mm (W x H x D)
Dimensions and Architecture
General Specifications Interfaces
Driver Support Ordering Information
Reference Drivers:
- Linux
- Android
- Windows Embedded Compact 7
- QNX Neutrino
- Green Hills Intergrity
- Mentor Graphics Nucleus
SX-SDMAN-2830C: Connector Mount, Bulk Package
SX-SDMAN-2830C-SP: Connector Mount, Sample Pack
SX-SDMAN-2830S: Surface Mount, Bulk Package
SX-SDMAN-2830S-SP: Surface Mount, 10 Unit Sample Pack
SX-6K3-EVK-SD: AR6003 Dual Band Evaluation Kit
(Includes SX-SDCAN-2830)
On-Chip Functionality: Single-chip MAC/BB/RF/PA/LNA
Frequency Band: 2.4 GHz / 5 GHz
Network Standard: 802.11a, 802.11b, 802.11g, 802.11n
(1-stream)
Modulation Modes: OFDM (64QAM, 16QAM, QPSK, BPSK),
DSSS (CCK, DQPSK, DBPSK), DSSS-OFDM
(64QAM, 16QAM, QPSK, BPSK)
Hardware Encryption: WEP, WPA/WPA2 (TKIP/AES-CCMP), WAPI
Quality of Service (QoS): WMM, WMM-PS, 802.11e
SX-SDMAN
802.11a/b/g/n Plus Bluetooth SDIO Module
silex technology is a registered trademark of silex technology, Inc. Other product or brand names may be registered trademarks or trademarks of their respective owners.
Technical information and specifications are subject to change without notice. © 2013 silex technology, Inc. All rights reserved.
silex global sales & support locations
US Office
silex technology america, Inc.
+1-801-748-1199
US toll free 866-765-8761
www.silexamerica.com
sales@silexamerica.com
Europe Office
silex technology europe, GmbH
+49-2159-65009-0
www.silexeurope.com
contact@silexeurope.com
Corporate Headquarters
silex technology, Inc.
+81-774-98-3781
www.silex.jp
support@silex.jp
PN: 141-00207-130
REV C. 20131230
Bottom viewTop view Bottom viewTop view
Connector Mount Surface Mount