Steps in making extension cord
•Download as PPTX, PDF•
8 likes•56,510 views
The document provides instructions for making an electrical extension cord using wire cutters, a male electric plug, screwdriver, and female electric plug. It involves stripping the ends of the electrical wire, inserting the wire into the male and female plugs, twisting the wire ends to ensure contact, and securing the wires with screws to complete the cord.
Report
Share
Report
Share
Recommended
K-12 Module in TLE 8 (Electrical) 3rd Grading
This document provides an electrical installation and maintenance learning module for grades 7 and 8 in the Philippines. It covers 5 lessons: 1) preparing electrical supplies, materials, and tools; 2) performing mensuration and calculations; 3) interpreting technical drawings and plans; 4) maintaining tools and equipment; and 5) practicing occupational safety and health. Each lesson defines learning outcomes and performance standards to build competencies in electrical installation and maintenance. The module guides students through learning activities, self-checks, demonstrations, and assessments to achieve the goals of the exploratory course.
K to 12 Electrical Learning Module
Here are the key points covered in the information sheet:
- Screwdrivers (standard/flat, Philips, stubby, Allen) are used to loosen or tighten screws of different head types.
- Hammers are used for driving or pulling out nails. Types include claw hammer, mallet, ballpeen hammer.
- Pliers (combination, side cutting, long nose) are used for cutting, twisting, bending wires and cables.
- Other tools include wire strippers, electrician's knife, portable electric drill, hacksaw.
- Electrical materials include convenience outlets, male plugs, lamp holders (flush, hanging, surface), switches (hanging, flush, surface)
T.L.E. GRADE 7 LESSONS
This document lists and identifies various electrical tools, equipment, supplies, and materials including different types of screw drivers, hammers, pliers, boxes, wires, conduits, clamps, connectors, strippers, knives, drills, outlets, plugs, lamp holders, switches, fuses, and circuit breakers that are commonly used in electrical work.
TLE-IA Electrical Installation and Maintenance Curriculum Guide
This document outlines a curriculum for an Industrial Arts - Electrical Installation and Maintenance course for grades 7-9 in the Philippines. The grade 7/8 course is introductory and exploratory, covering basic concepts, career opportunities, and common competencies. The grade 9 course is a specialization course covering preparing electric tools, and installing lighting systems, outlets, and fixtures. Both courses aim to teach concepts, competencies, and standards to lead to a National Certificate Level II in Electrical Installation and Maintenance.
Electrical installation and maintenance module 10
This document provides learning materials for an electrical installation and maintenance course. It includes information sheets, self-checks, and activity sheets on various electrical wiring methods and safety procedures. The summaries are:
1. The document contains curriculum materials for a 10th grade electrical installation and maintenance course, including topics on wires and cables, electrical symbols, and different wiring methods.
2. Various wiring methods are covered, such as flexible armored cable wiring, non-metallic sheathed cable, flexible metallic tubing, rigid steel conduit, and intermediate metallic tubing. Safety procedures and Republic Act 7832 on anti-electric theft are also discussed.
3. The materials provide content and performance standards, objectives, assessments,
T.L.E. GRADE 7 LESSONS
This document discusses classifying tools as either functional or non-functional. It defines functional tools as those in good condition able to perform their regular functions, while non-functional tools are unable to perform properly due to damaged or impaired parts. Examples of each are given. The document also outlines five methods for identifying non-functional tools or equipment: visual inspection, functionality, performance, power supply, and input from those with technical knowledge. Tools and equipment are classified into seven categories.
Electrical tools and its function
The document discusses various electrical tools and their functions. It describes screwdrivers like standard, Philips, and stubby screwdrivers which are used to drive different types of screws. Pliers are also discussed, including combination pliers, side cutting pliers, and long nose pliers which are used for gripping, cutting, and holding wires. Additional tools mentioned are wire strippers, electrician's knives, portable electric drills, and hacksaws, each serving a specific purpose like stripping wire insulation or cutting metal materials. Proper tool use and safety are emphasized.
T.L.E. GRADE 7 LESSONS
1. The document outlines a project plan to make an extension cord, including defining objectives, listing required materials and their costs, describing necessary tools, and providing step-by-step procedures.
2. Materials needed include flat cord, a male plug, eyelet wire connectors, and a convenience outlet. Tools include screwdrivers, pliers, and a pocket knife.
3. The procedure involves stripping and twisting wire ends, tying an underwriter's knot, connecting wires to the plug and outlet, and testing the completed cord.
Recommended
K-12 Module in TLE 8 (Electrical) 3rd Grading
This document provides an electrical installation and maintenance learning module for grades 7 and 8 in the Philippines. It covers 5 lessons: 1) preparing electrical supplies, materials, and tools; 2) performing mensuration and calculations; 3) interpreting technical drawings and plans; 4) maintaining tools and equipment; and 5) practicing occupational safety and health. Each lesson defines learning outcomes and performance standards to build competencies in electrical installation and maintenance. The module guides students through learning activities, self-checks, demonstrations, and assessments to achieve the goals of the exploratory course.
K to 12 Electrical Learning Module
Here are the key points covered in the information sheet:
- Screwdrivers (standard/flat, Philips, stubby, Allen) are used to loosen or tighten screws of different head types.
- Hammers are used for driving or pulling out nails. Types include claw hammer, mallet, ballpeen hammer.
- Pliers (combination, side cutting, long nose) are used for cutting, twisting, bending wires and cables.
- Other tools include wire strippers, electrician's knife, portable electric drill, hacksaw.
- Electrical materials include convenience outlets, male plugs, lamp holders (flush, hanging, surface), switches (hanging, flush, surface)
T.L.E. GRADE 7 LESSONS
This document lists and identifies various electrical tools, equipment, supplies, and materials including different types of screw drivers, hammers, pliers, boxes, wires, conduits, clamps, connectors, strippers, knives, drills, outlets, plugs, lamp holders, switches, fuses, and circuit breakers that are commonly used in electrical work.
TLE-IA Electrical Installation and Maintenance Curriculum Guide
This document outlines a curriculum for an Industrial Arts - Electrical Installation and Maintenance course for grades 7-9 in the Philippines. The grade 7/8 course is introductory and exploratory, covering basic concepts, career opportunities, and common competencies. The grade 9 course is a specialization course covering preparing electric tools, and installing lighting systems, outlets, and fixtures. Both courses aim to teach concepts, competencies, and standards to lead to a National Certificate Level II in Electrical Installation and Maintenance.
Electrical installation and maintenance module 10
This document provides learning materials for an electrical installation and maintenance course. It includes information sheets, self-checks, and activity sheets on various electrical wiring methods and safety procedures. The summaries are:
1. The document contains curriculum materials for a 10th grade electrical installation and maintenance course, including topics on wires and cables, electrical symbols, and different wiring methods.
2. Various wiring methods are covered, such as flexible armored cable wiring, non-metallic sheathed cable, flexible metallic tubing, rigid steel conduit, and intermediate metallic tubing. Safety procedures and Republic Act 7832 on anti-electric theft are also discussed.
3. The materials provide content and performance standards, objectives, assessments,
T.L.E. GRADE 7 LESSONS
This document discusses classifying tools as either functional or non-functional. It defines functional tools as those in good condition able to perform their regular functions, while non-functional tools are unable to perform properly due to damaged or impaired parts. Examples of each are given. The document also outlines five methods for identifying non-functional tools or equipment: visual inspection, functionality, performance, power supply, and input from those with technical knowledge. Tools and equipment are classified into seven categories.
Electrical tools and its function
The document discusses various electrical tools and their functions. It describes screwdrivers like standard, Philips, and stubby screwdrivers which are used to drive different types of screws. Pliers are also discussed, including combination pliers, side cutting pliers, and long nose pliers which are used for gripping, cutting, and holding wires. Additional tools mentioned are wire strippers, electrician's knives, portable electric drills, and hacksaws, each serving a specific purpose like stripping wire insulation or cutting metal materials. Proper tool use and safety are emphasized.
T.L.E. GRADE 7 LESSONS
1. The document outlines a project plan to make an extension cord, including defining objectives, listing required materials and their costs, describing necessary tools, and providing step-by-step procedures.
2. Materials needed include flat cord, a male plug, eyelet wire connectors, and a convenience outlet. Tools include screwdrivers, pliers, and a pocket knife.
3. The procedure involves stripping and twisting wire ends, tying an underwriter's knot, connecting wires to the plug and outlet, and testing the completed cord.
EIM 7/8 Lesson 1: Prepare Electrical Tools and Materials
Learning Outcomes:
* identify and explain the use of different electrical tools and materials;
* identify the different forms used in electrical installation
* perform basic manipulation of electrical tools and materials; and
* observe safety precautions in handling electrical tools and materials
This Lesson includes:
* Electrical Tools
* Electrical Materials
K to 12 electrical learning module
This document provides an exploratory course module on electrical installation and maintenance for grades 7-8 students, covering 5 lessons that teach competencies in preparing electrical supplies and tools, performing calculations, interpreting technical drawings, maintaining tools and equipment, and practicing occupational safety. The module defines key terms, lists learning outcomes and performance standards for each lesson, and provides learning activities and assessments to help students master the concepts and skills needed for an entry-level role in the electrical field.
IPCRF-DEVELOPMENT-PLAN- (1).docx
This document outlines the development plan of Alviola Village Integrated Secondary School-Annex. It identifies the school's strengths and areas for development based on the RPMS-PPST objectives. The plan aims to enhance teachers' content knowledge, pedagogy, and ICT skills through webinars and applying knowledge gained. It also focuses on developing different teaching strategies and selecting appropriate teaching resources including ICT. Relationship building with parents and the community is emphasized to facilitate involvement in education. The plan additionally targets improving core behavioral competencies like self-management, professionalism, and developing a professional image. Assistance from school heads and colleagues is included to provide feedback and critiques. The timeline is year-round and resources like local
Common Wire Splices And Joints
This document describes various common electrical wire splices and joints. It explains rat tail or pig tail joints that are used to join conductors inside junction boxes. It also discusses Y-splices that are used on small cables, knotted taps for heavy tensile stress, plain taps and aerial taps for temporary connections, and duplex cross joints, Western Union short-tie splices, and Western Union long tie splices to extend wire lengths. Additionally, it mentions cross joints, wrapped taps, and tee joints for different conductor sizes and stress conditions.
Electrical tools and equipment
This document defines electrical terms and discusses tools and equipment used in electrical work. It defines terms like ampere, circuit, kilowatt, conductor, resistance, and types of conduits. It then describes common tools like screwdrivers, hammers, pliers, wire strippers, knives, drills and hacksaws used for tasks like installing wires and cables, cutting and stripping insulation, and making holes. The document provides details on different types of each tool, their purposes and functions in electrical work.
Performing mensuration and calculation
This document defines and describes various units of measurement and tools used for electrical work. It discusses units like amps, volts, and ohms used to measure electrical current, pressure, and resistance. Tools described include multi-testers for measuring voltage, resistance, and current; ammeters and voltmeters for measuring amps and volts; ohmmeters for resistance; and wire gauges and micrometers for measuring wire diameters. Pull-push rules and rulers are also covered for linear measurement of objects.
Electrical hand tools and equipment
The document discusses electrical hand tools and measuring equipment used in electrical installation and maintenance. It defines various tools like screwdrivers, hammers, pliers and their uses. It also explains measuring instruments such as voltmeters, ammeters and multimeters. Learners are expected to identify different tools, understand their functions, and classify them according to their specifications and uses. Various activities and assignments are given to reinforce learning.
Electrical signs and symbols
This document discusses electrical signs, symbols, and their meanings. It provides examples of common electrical signs for caution, danger, prohibition, and other hazards. Electrical symbols represent electrical devices in diagrams and plans, with descriptions provided for symbols like conductors, switches, batteries, resistors, and more. Safety signs and symbols are important to understand electrical hazards and instructions. The document encourages drawing electrical plans for various rooms and one's own house.
EIM 7/8 Lesson 2: Perform Mensuration and Calculation
LEARNING OUTCOMES:
* explain the basic concept of a system of measurement;
* perform measurement and calculation about electrical works;
* observe safety precautions in handling electrical measuring tools and instruments.
This Lesson Includes:
* System of Measurement
* Basic Unit Conversions
* The Multitester
* Resistance Reading
T.L.E. GRADE 7 LESSONS
This document discusses different types of forms used in electrical work. It describes purchase requisition forms which are used to request items from purchasing, inventory forms which track raw materials and finished goods, job order forms which provide instructions for work to be completed, and borrower's forms for requesting tools and equipment needed for jobs. Maintaining accurate forms is important for obtaining the right materials and tools for electrical jobs.
TLE 8 - TECHNICAL DRAFTING (HAZARD AND RISK)
This document discusses occupational safety and health topics including hazards, risks, and hazard control methods. It defines occupational safety and health as protecting worker safety, health and welfare. It describes the components of an occupational health record. It then defines hazards as things that can cause harm and risks as a measure of possible harmful effects. The document outlines different types of workplace hazards including biological, chemical, ergonomic, physical, and psychological hazards. It provides examples of effects for each hazard type. Finally, it discusses methods to control hazards, including elimination, substitution, engineering controls, administrative controls, and personal protective equipment.
ELECTRICAL TOOLS AND EQUIPMENT
Pliers are used by tradesmen like electricians to grip, twist, bend, and cut wire. Common types include linesman's pliers and needle-nose pliers. Wire strippers are used to strip insulation from electric wires. Crimping deforms one material, like a wire, to hold another, like a metal plate, joining them together. Utility knives fold compactly and are used to cut wire when pliers are unsuitable. Tape measures coil into cases and are used to measure length. Voltmeters detect voltage in wires or equipment without direct contact. Power drills are rotating electric tools. Oscilloscopes display voltage or current signals on a cathode ray tube. Function generators output repeating or non-
PANG-ABAY (PAMANAHON, PANLUNAN, PAMARAAN, PANGGAANO, KATAGA)
(PAMANAHON, PANLUNAN, PAMARAAN, PANGGAANO, KATAGA)
CSS L02 - Tool and Equipment in CSS
The document discusses tools and equipment used in computer system servicing (CSS). It describes proper tool selection, preparation for tasks, safe tool use, and different types of tools including ESD tools, hand tools, cleaning tools, and diagnostic tools. Examples are provided for each tool type, such as anti-static wrist straps, screwdrivers, tweezers, compressed air, and multimeters. Maintaining tools and selecting the right tool for each job is important for safety and completing repairs efficiently.
DRAFTING MATERIALS AND TOOLS ITS USES/FUNCTIONS
This document provides an overview of common drafting materials and tools, their uses, and functions. It describes drawing paper, masking tape, pencil sharpeners, erasers, drawing pencils in various grades, triangular scales, erasing shields, and common drawing instruments like T-squares, triangles, compasses, dividers, and protractors. The key tools are used for tasks like making horizontal and vertical lines, transferring measurements, drawing arcs and circles, and measuring angles and degrees. A variety of materials like paper, pencils, tape, and instruments in different designs are available to aid the drafting process.
What is electrical installation and maintenance
The document summarizes the Electrical Installation and Maintenance NC II course in the Philippines. The 402-hour course trains students to install and maintain electrical wiring, lighting, and related equipment in residential buildings under 600 volts. Students learn skills like interpreting drawings, installing wiring devices, and setting up electrical protection systems. Upon completing competency assessment, graduates receive a National Certificate II, qualifying them for jobs as building wiring electricians, residential/commercial wiring electricians, or maintenance electricians.
K to 12 PC Hardware Servicing Learning Module
This document provides a learning module on computer hardware servicing for grades 7 and 8 in the Philippines. It covers four key lessons: (1) using hand tools, (2) performing calculations and measurements, (3) preparing and interpreting technical drawings, and (4) practicing occupational health and safety. Each lesson aims to achieve several learning outcomes and provides materials, activities, and assessments to help students meet the defined performance standards. The overall goal is to introduce students to the field of computer hardware servicing and prepare them for a potential certification in that area.
TLE7 EIM Week 4 3rd Q analyzing symbols and data.pptx
This document discusses analyzing electrical signs, symbols, and data. It defines common electrical symbols used in schematic diagrams and plans. Examples of electrical symbols, signs like voltage danger and electrical hazard, and different types of circuits like series and parallel are shown. The document also discusses interpreting technical drawings like pictorial diagrams, schematic diagrams, and electrical plans. It provides an example of matching electrical symbols and counting fixtures from an electrical plan.
K-12 Module in T.L.E. Grade 8 Second Grading (Handicrafts)
==========================================
K-12 Module in A.P. Grade 8 Second Grading!
Want to Download?
Click Here => http://www.slideshare.net/danielmanaog14/savedfiles?s_title=1-27-pages&user_login=danielmanaog14
==========================================
Steps in making two toned pillow case
The document provides instructions for making a pillowcase using two fabrics: a 27" x 44" main fabric and a 9" x 44" trim piece. The instructions involve laying the fabrics right sides down and rolling the main fabric to create a tube, then folding the trim piece over and pinning the raw edges. The tube is then sewn with a half inch seam allowance and pulled right side out to form the pillowcase. Finally, the pillowcase is folded in half and the side and bottom seams are pinned and sewn with a 1/4 inch and 1/2 inch seam allowance respectively.
Inserting and editing text
To create a multimedia presentation in PowerPoint:
1. Insert text by clicking on a text box and typing.
2. Edit existing text by clicking on the slide thumbnail, selecting the text to change, and typing the new text which will replace the old.
3. Various slide elements like titles, images, and text boxes can be manipulated by selecting them and using formatting tools.
More Related Content
What's hot
EIM 7/8 Lesson 1: Prepare Electrical Tools and Materials
Learning Outcomes:
* identify and explain the use of different electrical tools and materials;
* identify the different forms used in electrical installation
* perform basic manipulation of electrical tools and materials; and
* observe safety precautions in handling electrical tools and materials
This Lesson includes:
* Electrical Tools
* Electrical Materials
K to 12 electrical learning module
This document provides an exploratory course module on electrical installation and maintenance for grades 7-8 students, covering 5 lessons that teach competencies in preparing electrical supplies and tools, performing calculations, interpreting technical drawings, maintaining tools and equipment, and practicing occupational safety. The module defines key terms, lists learning outcomes and performance standards for each lesson, and provides learning activities and assessments to help students master the concepts and skills needed for an entry-level role in the electrical field.
IPCRF-DEVELOPMENT-PLAN- (1).docx
This document outlines the development plan of Alviola Village Integrated Secondary School-Annex. It identifies the school's strengths and areas for development based on the RPMS-PPST objectives. The plan aims to enhance teachers' content knowledge, pedagogy, and ICT skills through webinars and applying knowledge gained. It also focuses on developing different teaching strategies and selecting appropriate teaching resources including ICT. Relationship building with parents and the community is emphasized to facilitate involvement in education. The plan additionally targets improving core behavioral competencies like self-management, professionalism, and developing a professional image. Assistance from school heads and colleagues is included to provide feedback and critiques. The timeline is year-round and resources like local
Common Wire Splices And Joints
This document describes various common electrical wire splices and joints. It explains rat tail or pig tail joints that are used to join conductors inside junction boxes. It also discusses Y-splices that are used on small cables, knotted taps for heavy tensile stress, plain taps and aerial taps for temporary connections, and duplex cross joints, Western Union short-tie splices, and Western Union long tie splices to extend wire lengths. Additionally, it mentions cross joints, wrapped taps, and tee joints for different conductor sizes and stress conditions.
Electrical tools and equipment
This document defines electrical terms and discusses tools and equipment used in electrical work. It defines terms like ampere, circuit, kilowatt, conductor, resistance, and types of conduits. It then describes common tools like screwdrivers, hammers, pliers, wire strippers, knives, drills and hacksaws used for tasks like installing wires and cables, cutting and stripping insulation, and making holes. The document provides details on different types of each tool, their purposes and functions in electrical work.
Performing mensuration and calculation
This document defines and describes various units of measurement and tools used for electrical work. It discusses units like amps, volts, and ohms used to measure electrical current, pressure, and resistance. Tools described include multi-testers for measuring voltage, resistance, and current; ammeters and voltmeters for measuring amps and volts; ohmmeters for resistance; and wire gauges and micrometers for measuring wire diameters. Pull-push rules and rulers are also covered for linear measurement of objects.
Electrical hand tools and equipment
The document discusses electrical hand tools and measuring equipment used in electrical installation and maintenance. It defines various tools like screwdrivers, hammers, pliers and their uses. It also explains measuring instruments such as voltmeters, ammeters and multimeters. Learners are expected to identify different tools, understand their functions, and classify them according to their specifications and uses. Various activities and assignments are given to reinforce learning.
Electrical signs and symbols
This document discusses electrical signs, symbols, and their meanings. It provides examples of common electrical signs for caution, danger, prohibition, and other hazards. Electrical symbols represent electrical devices in diagrams and plans, with descriptions provided for symbols like conductors, switches, batteries, resistors, and more. Safety signs and symbols are important to understand electrical hazards and instructions. The document encourages drawing electrical plans for various rooms and one's own house.
EIM 7/8 Lesson 2: Perform Mensuration and Calculation
LEARNING OUTCOMES:
* explain the basic concept of a system of measurement;
* perform measurement and calculation about electrical works;
* observe safety precautions in handling electrical measuring tools and instruments.
This Lesson Includes:
* System of Measurement
* Basic Unit Conversions
* The Multitester
* Resistance Reading
T.L.E. GRADE 7 LESSONS
This document discusses different types of forms used in electrical work. It describes purchase requisition forms which are used to request items from purchasing, inventory forms which track raw materials and finished goods, job order forms which provide instructions for work to be completed, and borrower's forms for requesting tools and equipment needed for jobs. Maintaining accurate forms is important for obtaining the right materials and tools for electrical jobs.
TLE 8 - TECHNICAL DRAFTING (HAZARD AND RISK)
This document discusses occupational safety and health topics including hazards, risks, and hazard control methods. It defines occupational safety and health as protecting worker safety, health and welfare. It describes the components of an occupational health record. It then defines hazards as things that can cause harm and risks as a measure of possible harmful effects. The document outlines different types of workplace hazards including biological, chemical, ergonomic, physical, and psychological hazards. It provides examples of effects for each hazard type. Finally, it discusses methods to control hazards, including elimination, substitution, engineering controls, administrative controls, and personal protective equipment.
ELECTRICAL TOOLS AND EQUIPMENT
Pliers are used by tradesmen like electricians to grip, twist, bend, and cut wire. Common types include linesman's pliers and needle-nose pliers. Wire strippers are used to strip insulation from electric wires. Crimping deforms one material, like a wire, to hold another, like a metal plate, joining them together. Utility knives fold compactly and are used to cut wire when pliers are unsuitable. Tape measures coil into cases and are used to measure length. Voltmeters detect voltage in wires or equipment without direct contact. Power drills are rotating electric tools. Oscilloscopes display voltage or current signals on a cathode ray tube. Function generators output repeating or non-
PANG-ABAY (PAMANAHON, PANLUNAN, PAMARAAN, PANGGAANO, KATAGA)
(PAMANAHON, PANLUNAN, PAMARAAN, PANGGAANO, KATAGA)
CSS L02 - Tool and Equipment in CSS
The document discusses tools and equipment used in computer system servicing (CSS). It describes proper tool selection, preparation for tasks, safe tool use, and different types of tools including ESD tools, hand tools, cleaning tools, and diagnostic tools. Examples are provided for each tool type, such as anti-static wrist straps, screwdrivers, tweezers, compressed air, and multimeters. Maintaining tools and selecting the right tool for each job is important for safety and completing repairs efficiently.
DRAFTING MATERIALS AND TOOLS ITS USES/FUNCTIONS
This document provides an overview of common drafting materials and tools, their uses, and functions. It describes drawing paper, masking tape, pencil sharpeners, erasers, drawing pencils in various grades, triangular scales, erasing shields, and common drawing instruments like T-squares, triangles, compasses, dividers, and protractors. The key tools are used for tasks like making horizontal and vertical lines, transferring measurements, drawing arcs and circles, and measuring angles and degrees. A variety of materials like paper, pencils, tape, and instruments in different designs are available to aid the drafting process.
What is electrical installation and maintenance
The document summarizes the Electrical Installation and Maintenance NC II course in the Philippines. The 402-hour course trains students to install and maintain electrical wiring, lighting, and related equipment in residential buildings under 600 volts. Students learn skills like interpreting drawings, installing wiring devices, and setting up electrical protection systems. Upon completing competency assessment, graduates receive a National Certificate II, qualifying them for jobs as building wiring electricians, residential/commercial wiring electricians, or maintenance electricians.
K to 12 PC Hardware Servicing Learning Module
This document provides a learning module on computer hardware servicing for grades 7 and 8 in the Philippines. It covers four key lessons: (1) using hand tools, (2) performing calculations and measurements, (3) preparing and interpreting technical drawings, and (4) practicing occupational health and safety. Each lesson aims to achieve several learning outcomes and provides materials, activities, and assessments to help students meet the defined performance standards. The overall goal is to introduce students to the field of computer hardware servicing and prepare them for a potential certification in that area.
TLE7 EIM Week 4 3rd Q analyzing symbols and data.pptx
This document discusses analyzing electrical signs, symbols, and data. It defines common electrical symbols used in schematic diagrams and plans. Examples of electrical symbols, signs like voltage danger and electrical hazard, and different types of circuits like series and parallel are shown. The document also discusses interpreting technical drawings like pictorial diagrams, schematic diagrams, and electrical plans. It provides an example of matching electrical symbols and counting fixtures from an electrical plan.
K-12 Module in T.L.E. Grade 8 Second Grading (Handicrafts)
==========================================
K-12 Module in A.P. Grade 8 Second Grading!
Want to Download?
Click Here => http://www.slideshare.net/danielmanaog14/savedfiles?s_title=1-27-pages&user_login=danielmanaog14
==========================================
What's hot (20)
EIM 7/8 Lesson 1: Prepare Electrical Tools and Materials
EIM 7/8 Lesson 1: Prepare Electrical Tools and Materials
EIM 7/8 Lesson 2: Perform Mensuration and Calculation
EIM 7/8 Lesson 2: Perform Mensuration and Calculation
PANG-ABAY (PAMANAHON, PANLUNAN, PAMARAAN, PANGGAANO, KATAGA)
PANG-ABAY (PAMANAHON, PANLUNAN, PAMARAAN, PANGGAANO, KATAGA)
TLE7 EIM Week 4 3rd Q analyzing symbols and data.pptx
TLE7 EIM Week 4 3rd Q analyzing symbols and data.pptx
K-12 Module in T.L.E. Grade 8 Second Grading (Handicrafts)
K-12 Module in T.L.E. Grade 8 Second Grading (Handicrafts)
More from MariaLudaDelaPena
Steps in making two toned pillow case
The document provides instructions for making a pillowcase using two fabrics: a 27" x 44" main fabric and a 9" x 44" trim piece. The instructions involve laying the fabrics right sides down and rolling the main fabric to create a tube, then folding the trim piece over and pinning the raw edges. The tube is then sewn with a half inch seam allowance and pulled right side out to form the pillowcase. Finally, the pillowcase is folded in half and the side and bottom seams are pinned and sewn with a 1/4 inch and 1/2 inch seam allowance respectively.
Inserting and editing text
To create a multimedia presentation in PowerPoint:
1. Insert text by clicking on a text box and typing.
2. Edit existing text by clicking on the slide thumbnail, selecting the text to change, and typing the new text which will replace the old.
3. Various slide elements like titles, images, and text boxes can be manipulated by selecting them and using formatting tools.
Inserting and editing photos
To insert a photo in PowerPoint, select Insert > Pictures and choose a photo file to insert on the current slide. You can also insert photos by clicking on a placeholder. To edit photos, insert a photo on a slide, select it, and use the Picture Tools options to format, crop, or change the shape of the photo. Cropping removes unwanted edges or portions of the inserted photo.
Ways of food preservation
The document discusses several food preservation methods: salting, which uses salt as the main ingredient along with other spices; drying, which removes water from food; sugaring, which uses sugar as a preservative for jams, jellies, and candies; freezing, which freezes moisture in food at 0°C; and smoking, which exposes food to smoke from burning wood to preserve it.
Steps in making extension cord
The document provides instructions for making an electrical extension cord using wire cutters, a male electric plug, screwdriver, and female electric plug. It involves stripping 10cm of insulation from the wire ends, inserting the bare wires into the male and female plugs, twisting the wires together, and tightening the screws to secure the wires safely within the plugs and prevent electric shock.
Steps in making two toned pillow case
The document provides instructions for making a pillowcase using two pieces of fabric. It involves laying one fabric on top of the other, rolling one piece around the other to form a tube, pinning and sewing the edges to form seams, and then unfolding the tube to form the pillowcase shape. The instructions also include pinning and sewing the side and bottom seams with a half inch seam allowance to complete the pillowcase.
More from MariaLudaDelaPena (6)
Recently uploaded
How to Create a More Engaging and Human Online Learning Experience
How to Create a More Engaging and Human Online Learning Experience Wahiba Chair Training & Consulting
Wahiba Chair's Talk at the 2024 Learning Ideas Conference. BBR 2024 Summer Sessions Interview Training
Qualitative research interview training by Professor Katrina Pritchard and Dr Helen Williams
Solutons Maths Escape Room Spatial .pptx
Solutions of Puzzles of Mathematics Escape Room Game in Spatial.io
Chapter wise All Notes of First year Basic Civil Engineering.pptx
Chapter wise All Notes of First year Basic Civil Engineering
Syllabus
Chapter-1
Introduction to objective, scope and outcome the subject
Chapter 2
Introduction: Scope and Specialization of Civil Engineering, Role of civil Engineer in Society, Impact of infrastructural development on economy of country.
Chapter 3
Surveying: Object Principles & Types of Surveying; Site Plans, Plans & Maps; Scales & Unit of different Measurements.
Linear Measurements: Instruments used. Linear Measurement by Tape, Ranging out Survey Lines and overcoming Obstructions; Measurements on sloping ground; Tape corrections, conventional symbols. Angular Measurements: Instruments used; Introduction to Compass Surveying, Bearings and Longitude & Latitude of a Line, Introduction to total station.
Levelling: Instrument used Object of levelling, Methods of levelling in brief, and Contour maps.
Chapter 4
Buildings: Selection of site for Buildings, Layout of Building Plan, Types of buildings, Plinth area, carpet area, floor space index, Introduction to building byelaws, concept of sun light & ventilation. Components of Buildings & their functions, Basic concept of R.C.C., Introduction to types of foundation
Chapter 5
Transportation: Introduction to Transportation Engineering; Traffic and Road Safety: Types and Characteristics of Various Modes of Transportation; Various Road Traffic Signs, Causes of Accidents and Road Safety Measures.
Chapter 6
Environmental Engineering: Environmental Pollution, Environmental Acts and Regulations, Functional Concepts of Ecology, Basics of Species, Biodiversity, Ecosystem, Hydrological Cycle; Chemical Cycles: Carbon, Nitrogen & Phosphorus; Energy Flow in Ecosystems.
Water Pollution: Water Quality standards, Introduction to Treatment & Disposal of Waste Water. Reuse and Saving of Water, Rain Water Harvesting. Solid Waste Management: Classification of Solid Waste, Collection, Transportation and Disposal of Solid. Recycling of Solid Waste: Energy Recovery, Sanitary Landfill, On-Site Sanitation. Air & Noise Pollution: Primary and Secondary air pollutants, Harmful effects of Air Pollution, Control of Air Pollution. . Noise Pollution Harmful Effects of noise pollution, control of noise pollution, Global warming & Climate Change, Ozone depletion, Greenhouse effect
Text Books:
1. Palancharmy, Basic Civil Engineering, McGraw Hill publishers.
2. Satheesh Gopi, Basic Civil Engineering, Pearson Publishers.
3. Ketki Rangwala Dalal, Essentials of Civil Engineering, Charotar Publishing House.
4. BCP, Surveying volume 1
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 9 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2024-2025 - ...
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 9 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2024-2025 - ...Nguyen Thanh Tu Collection
https://app.box.com/s/tacvl9ekroe9hqupdnjruiypvm9rdaneHindi varnamala | hindi alphabet PPT.pdf
हिंदी वर्णमाला पीपीटी, hindi alphabet PPT presentation, hindi varnamala PPT, Hindi Varnamala pdf, हिंदी स्वर, हिंदी व्यंजन, sikhiye hindi varnmala, dr. mulla adam ali, hindi language and literature, hindi alphabet with drawing, hindi alphabet pdf, hindi varnamala for childrens, hindi language, hindi varnamala practice for kids, https://www.drmullaadamali.com
Advanced Java[Extra Concepts, Not Difficult].docx
This is part 2 of my Java Learning Journey. This contains Hashing, ArrayList, LinkedList, Date and Time Classes, Calendar Class and more.
Wound healing PPT
This document provides an overview of wound healing, its functions, stages, mechanisms, factors affecting it, and complications.
A wound is a break in the integrity of the skin or tissues, which may be associated with disruption of the structure and function.
Healing is the body’s response to injury in an attempt to restore normal structure and functions.
Healing can occur in two ways: Regeneration and Repair
There are 4 phases of wound healing: hemostasis, inflammation, proliferation, and remodeling. This document also describes the mechanism of wound healing. Factors that affect healing include infection, uncontrolled diabetes, poor nutrition, age, anemia, the presence of foreign bodies, etc.
Complications of wound healing like infection, hyperpigmentation of scar, contractures, and keloid formation.
Temple of Asclepius in Thrace. Excavation results
The temple and the sanctuary around were dedicated to Asklepios Zmidrenus. This name has been known since 1875 when an inscription dedicated to him was discovered in Rome. The inscription is dated in 227 AD and was left by soldiers originating from the city of Philippopolis (modern Plovdiv).
Beyond Degrees - Empowering the Workforce in the Context of Skills-First.pptx
Iván Bornacelly, Policy Analyst at the OECD Centre for Skills, OECD, presents at the webinar 'Tackling job market gaps with a skills-first approach' on 12 June 2024
LAND USE LAND COVER AND NDVI OF MIRZAPUR DISTRICT, UP
This Dissertation explores the particular circumstances of Mirzapur, a region located in the
core of India. Mirzapur, with its varied terrains and abundant biodiversity, offers an optimal
environment for investigating the changes in vegetation cover dynamics. Our study utilizes
advanced technologies such as GIS (Geographic Information Systems) and Remote sensing to
analyze the transformations that have taken place over the course of a decade.
The complex relationship between human activities and the environment has been the focus
of extensive research and worry. As the global community grapples with swift urbanization,
population expansion, and economic progress, the effects on natural ecosystems are becoming
more evident. A crucial element of this impact is the alteration of vegetation cover, which plays a
significant role in maintaining the ecological equilibrium of our planet.Land serves as the foundation for all human activities and provides the necessary materials for
these activities. As the most crucial natural resource, its utilization by humans results in different
'Land uses,' which are determined by both human activities and the physical characteristics of the
land.
The utilization of land is impacted by human needs and environmental factors. In countries
like India, rapid population growth and the emphasis on extensive resource exploitation can lead
to significant land degradation, adversely affecting the region's land cover.
Therefore, human intervention has significantly influenced land use patterns over many
centuries, evolving its structure over time and space. In the present era, these changes have
accelerated due to factors such as agriculture and urbanization. Information regarding land use and
cover is essential for various planning and management tasks related to the Earth's surface,
providing crucial environmental data for scientific, resource management, policy purposes, and
diverse human activities.
Accurate understanding of land use and cover is imperative for the development planning
of any area. Consequently, a wide range of professionals, including earth system scientists, land
and water managers, and urban planners, are interested in obtaining data on land use and cover
changes, conversion trends, and other related patterns. The spatial dimensions of land use and
cover support policymakers and scientists in making well-informed decisions, as alterations in
these patterns indicate shifts in economic and social conditions. Monitoring such changes with the
help of Advanced technologies like Remote Sensing and Geographic Information Systems is
crucial for coordinated efforts across different administrative levels. Advanced technologies like
Remote Sensing and Geographic Information Systems
9
Changes in vegetation cover refer to variations in the distribution, composition, and overall
structure of plant communities across different temporal and spatial scales. These changes can
occur natural.
Your Skill Boost Masterclass: Strategies for Effective Upskilling
Your Skill Boost Masterclass: Strategies for Effective UpskillingExcellence Foundation for South Sudan
Strategies for Effective Upskilling is a presentation by Chinwendu Peace in a Your Skill Boost Masterclass organisation by the Excellence Foundation for South Sudan on 08th and 09th June 2024 from 1 PM to 3 PM on each day.What is Digital Literacy? A guest blog from Andy McLaughlin, University of Ab...
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Aberdeen
Main Java[All of the Base Concepts}.docx
This is part 1 of my Java Learning Journey. This Contains Custom methods, classes, constructors, packages, multithreading , try- catch block, finally block and more.
Recently uploaded (20)
How to Create a More Engaging and Human Online Learning Experience
How to Create a More Engaging and Human Online Learning Experience
Film vocab for eal 3 students: Australia the movie
Film vocab for eal 3 students: Australia the movie
Chapter wise All Notes of First year Basic Civil Engineering.pptx
Chapter wise All Notes of First year Basic Civil Engineering.pptx
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 9 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2024-2025 - ...
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 9 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2024-2025 - ...
Beyond Degrees - Empowering the Workforce in the Context of Skills-First.pptx
Beyond Degrees - Empowering the Workforce in the Context of Skills-First.pptx
IGCSE Biology Chapter 14- Reproduction in Plants.pdf
IGCSE Biology Chapter 14- Reproduction in Plants.pdf
LAND USE LAND COVER AND NDVI OF MIRZAPUR DISTRICT, UP
LAND USE LAND COVER AND NDVI OF MIRZAPUR DISTRICT, UP
Your Skill Boost Masterclass: Strategies for Effective Upskilling
Your Skill Boost Masterclass: Strategies for Effective Upskilling
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Ab...
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Ab...
Steps in making extension cord
- 2. Electrical cord Wire cutters Male electric plug Screw driver Female electric plug
- 4. 1. Separate one end of electrical wire to about 10 centimeters each.
- 6. 2. Peel off the skin or insulator of the wire ends by 2 centimeters.
- 8. 3. Loosen the screw of the male electric plug. Open cover of male plug with a screwdriver.
- 10. 4. Insert the wire into the male plug .Twist both ends of the wire to keep the wires making contact with each other. Tighten the screws down to hold the wires securely.
- 12. 5. Put back the cover of the plug so the wire will not be exposed and cause electric shock.
- 14. 6. Repeat steps 1 to 4 on the other end of the electrical wire,this time with the female plug.Once the steps have been done you now have a complete extension cord.