The document provides instructions for making an electrical extension cord using wire cutters, a male electric plug, screwdriver, and female electric plug. It involves stripping 10cm of insulation from the wire ends, inserting the bare wires into the male and female plugs, twisting the wires together, and tightening the screws to secure the wires safely within the plugs and prevent electric shock.

2. Electrical cord
Wire cutters
Male electric plug
Screw driver
Female electric
plug

4. 1. Separate one
end of electrical
wire to about 10
centimeters
each.

6. 2. Peel off the
skin or insulator
of the wire
ends by 2
centimeters.

8. 3. Loosen the screw of
the male electric plug.
Open cover of male
plug with a
screwdriver.

10. 4. Insert the wire into
the male plug .Twist
both ends of the wire
to keep the wires
making contact with
each other. Tighten the
screws down to hold
the wires securely.

12. 5. Put back the
cover of the plug so
the wire will not be
exposed and cause
electric shock.

14.  6. Repeat steps 1 to 4 on
the other end of the
electrical wire,this time
with the female plug.Once
the steps have been done
you now have a complete
extension cord.