stemum hyoid 9- Match the following types of synovial joints to their.pdf
•
0 likes•6 views
stemum hyoid 9. Match the following types of synovial joints to their descriptions. F spherical head in a round concavity (shoulderhip) a. plane/gliding joint rotational movement ("no" joint) b. hinge joint movement between two flat surfaces (intercarpal joint) c. pivot joint two concave surfaces (trapezium/metacarpal 1) 10 two concave surfaces (trapeziun d. ellipsoid/condyloid joint e. saddle joint movement in two planes (wrist) f. ball-and-socket join 10. Match the following movements with their descriptions. turning the soles of the feet medially a. flexion preventing movement in either direction b. extension K move in a superior direction (shrug shoulders) c. abduction medial rotation of the hands (forearm) d. adduction making the joint angle smaller (elbow) e. rotation movement of arms \& legs away from the body f. supination movement in inferior direction (anti-shrug of shoulders) g. pronation making the joint angle larger (elbow) h. circumduction turning the soles of the feet laterally i. protraction lateral rotation of the hands (forearm) j. retmction horizontal movement in posterior direction (chin) k. elevation return of arms \& legs back to anatomic position 1. depression h circular movement of a part of the body m. inversion horizontal movement in anterior direction (chin) n. eversion movement of the arm in a conical shape o. fixation.
Report
Share
Report
Share
Download to read offline
Recommended
Anatomical movement - terms & medical information 
Anatomical terms of movement are used to describe the actions of the skeleton muscles. Muscles contracted to produce joint movement and subsequent movements can be precisely described using the following terminology.
As for the anatomical location, the terms used assume that the body starts in an anatomical position. Most of the movements have an opposite movement, otherwise known as an antagonistic movement. The terms are described herein as antagonistic pairs for ease of understanding.
please comment
thank u.......
Persendian
This document discusses the anatomy and types of joints in the human body. It begins by defining kinesiology as the study of movement and notes that joints allow for locomotion even if in small amounts. There are three main types of joints based on movement: synarthrosis which allow little-to-no movement, amphiarthrosis which allow slight movement, and diarthrosis which allow more freedom of movement. Diarthrosis are further classified as synovial joints which have a synovial cavity and more mobility. The document then proceeds to describe the specific structures and examples of various joint types including fibrous joints, cartilaginous joints, and the six types of synovial joints. It concludes by detailing individual
Biomechanics of knee complex 1
This document provides an overview of the biomechanics of the knee complex. It describes the anatomy of the tibiofemoral and patellofemoral joints, including the femoral condyles, tibial plateaus, and alignment of the femur and tibia. It also discusses how weight-bearing forces are distributed between the medial and lateral compartments during activities like standing, walking, and with conditions like genu valgum or genu varum. The complex biomechanics of the knee allow for both mobility and stability through interactions of its bones, cartilage, ligaments and muscles.
Biomechanics of knee complex 1
This document provides an overview of the biomechanics of the knee complex. It describes the anatomy of the tibiofemoral and patellofemoral joints, including the femoral condyles, tibial plateaus, and alignment of the femur and tibia. It also discusses how weight bearing forces are distributed during static and dynamic activities, and how malalignment can increase stresses on the medial or lateral compartments.
Introduction human movement apparatus-Dr.B.B.Gosai
This document provides an overview of the human movement apparatus, including bones, joints, and the vertebral column. It describes the general anatomy of bones, including their classification, features, and functions. It discusses the anatomy of joints, including their classification into fibrous, cartilaginous, and synovial joints. It provides details on the types of synovial joints. It also covers the general anatomy of the vertebral column, including its curvatures, joints, movements, vertebral features, and the clinical importance. Finally, it enumerates the bones of the upper and lower limbs.
Kin191 A. Osteokinematics. Fall 2007
The document defines and describes various types of human movement, including osteokinematics and arthokinematics. It explains the differences between kinematics and kinetics, and defines the three planes of motion (sagittal, frontal, transverse) and three axes of rotation (X, Y, Z). Finally, it provides definitions and examples for various terms used to describe types of motion, such as flexion, extension, abduction, rotation, and others.
Articulaciones
There are three main types of joints based on structure and movement: synarthroses which do not allow movement, amphiarthroses which allow slight movement, and diarthroses which are freely movable. Diarthroses are further classified into fibrous, cartilaginous, and synovial joints. Synovial joints are the most complex and include the shoulder, elbow, wrist, hip, knee, ankle, and small joints of the hands and feet. They contain a joint cavity lined with synovial membrane which produces synovial fluid for lubrication.
Biomechanics of knee complex 1
This document provides an overview of the biomechanics of the knee complex. It describes the anatomy of the tibiofemoral and patellofemoral joints, including the femoral condyles, tibial plateaus, and surrounding ligaments. It explains that the knee allows for flexion, extension, and rotation. It also discusses how the alignment of the femur and tibia influences weight distribution and stresses on the medial and lateral compartments during activities like walking. Abnormal alignments like genu valgum or varum can increase risks of conditions like osteoarthritis.
Recommended
Anatomical movement - terms & medical information
Anatomical terms of movement are used to describe the actions of the skeleton muscles. Muscles contracted to produce joint movement and subsequent movements can be precisely described using the following terminology.
As for the anatomical location, the terms used assume that the body starts in an anatomical position. Most of the movements have an opposite movement, otherwise known as an antagonistic movement. The terms are described herein as antagonistic pairs for ease of understanding.
please comment
thank u.......
Persendian
This document discusses the anatomy and types of joints in the human body. It begins by defining kinesiology as the study of movement and notes that joints allow for locomotion even if in small amounts. There are three main types of joints based on movement: synarthrosis which allow little-to-no movement, amphiarthrosis which allow slight movement, and diarthrosis which allow more freedom of movement. Diarthrosis are further classified as synovial joints which have a synovial cavity and more mobility. The document then proceeds to describe the specific structures and examples of various joint types including fibrous joints, cartilaginous joints, and the six types of synovial joints. It concludes by detailing individual
Biomechanics of knee complex 1
This document provides an overview of the biomechanics of the knee complex. It describes the anatomy of the tibiofemoral and patellofemoral joints, including the femoral condyles, tibial plateaus, and alignment of the femur and tibia. It also discusses how weight-bearing forces are distributed between the medial and lateral compartments during activities like standing, walking, and with conditions like genu valgum or genu varum. The complex biomechanics of the knee allow for both mobility and stability through interactions of its bones, cartilage, ligaments and muscles.
Biomechanics of knee complex 1
This document provides an overview of the biomechanics of the knee complex. It describes the anatomy of the tibiofemoral and patellofemoral joints, including the femoral condyles, tibial plateaus, and alignment of the femur and tibia. It also discusses how weight bearing forces are distributed during static and dynamic activities, and how malalignment can increase stresses on the medial or lateral compartments.
Introduction human movement apparatus-Dr.B.B.Gosai
This document provides an overview of the human movement apparatus, including bones, joints, and the vertebral column. It describes the general anatomy of bones, including their classification, features, and functions. It discusses the anatomy of joints, including their classification into fibrous, cartilaginous, and synovial joints. It provides details on the types of synovial joints. It also covers the general anatomy of the vertebral column, including its curvatures, joints, movements, vertebral features, and the clinical importance. Finally, it enumerates the bones of the upper and lower limbs.
Kin191 A. Osteokinematics. Fall 2007
The document defines and describes various types of human movement, including osteokinematics and arthokinematics. It explains the differences between kinematics and kinetics, and defines the three planes of motion (sagittal, frontal, transverse) and three axes of rotation (X, Y, Z). Finally, it provides definitions and examples for various terms used to describe types of motion, such as flexion, extension, abduction, rotation, and others.
Articulaciones
There are three main types of joints based on structure and movement: synarthroses which do not allow movement, amphiarthroses which allow slight movement, and diarthroses which are freely movable. Diarthroses are further classified into fibrous, cartilaginous, and synovial joints. Synovial joints are the most complex and include the shoulder, elbow, wrist, hip, knee, ankle, and small joints of the hands and feet. They contain a joint cavity lined with synovial membrane which produces synovial fluid for lubrication.
Biomechanics of knee complex 1
This document provides an overview of the biomechanics of the knee complex. It describes the anatomy of the tibiofemoral and patellofemoral joints, including the femoral condyles, tibial plateaus, and surrounding ligaments. It explains that the knee allows for flexion, extension, and rotation. It also discusses how the alignment of the femur and tibia influences weight distribution and stresses on the medial and lateral compartments during activities like walking. Abnormal alignments like genu valgum or varum can increase risks of conditions like osteoarthritis.
Oatis c, 1998 biomechanics of the foot and ankle
This document discusses the static biomechanics of the foot and ankle. It describes the axes of motion and terminology for the ankle, subtalar joint, and transverse tarsal joint. There is inconsistent terminology in the literature for motions like pronation, supination, eversion, and inversion. The document recommends using pronation to describe combined dorsiflexion, abduction, and eversion, and supination to describe combined plantar flexion, adduction, and inversion. It also discusses the planes of motion and reviews range of motion values reported in the literature for the ankle and subtalar joints.
Biomechanics of hip complex 2
This document discusses the function and biomechanics of the hip joint. It describes the three motions of the hip joint - flexion/extension, abduction/adduction, and medial/lateral rotation - as movements of the femoral head within the acetabulum. It also discusses pelvic motions including anterior/posterior tilt, lateral tilt, and anterior/posterior rotation which produce the same motions at the hip joint. Compensatory lumbar spine motions that accompany various pelvic motions in weight-bearing are also described.
Unit 8 Ppt
The document discusses the classification and structure of joints in the skeletal system. It describes three types of joints - fibrous, cartilaginous, and synovial joints. Synovial joints are further divided into six categories based on their structure and movement capabilities, including ball-and-socket, hinge, and gliding joints. Examples of various joints like the shoulder, elbow, hip, and knee are provided along with diagrams labeling their structural features.
Joints powerpoint
Joints connect bones together and allow movement. There are over 200 joints in the human body. Joints are classified by their structure and movement. The three main types are fibrous, cartilaginous, and synovial joints. Synovial joints are the most common and movable. They include ball-and-socket, hinge, and gliding joints which allow different types of movement like flexion, extension, and rotation.
Open stax anatomy&physiology ch09
This document provides an overview of the anatomy and physiology of joints in the human body. It includes descriptions of the main types of joints - fibrous, cartilaginous, and synovial joints - along with examples of each. It also summarizes the movements allowed by different synovial joints and describes common joint structures like ligaments, cartilage, and bursae. The document uses diagrams to illustrate key anatomical features of important joints like the knee, shoulder, elbow, hip, ankle, and temporomandibular joint.
GCSE PE Revision: Joints
There are three classifications of joints: fixed/immovable joints, slightly movable joints, and freely movable or synovial joints. The main synovial joints are ball and socket, hinge, and pivot joints. Ball and socket joints allow movement in all directions at the shoulder and hip. Hinge joints only allow movement in two directions, like the knee and elbow. Pivot joints only allow rotation, found at the top of vertebrae in the neck. Each joint type facilitates different movements and can be identified by their structure and motion.
Biomechanics of ankle and foot
The ankle and foot are complex structures that combine flexibility and stability. They consist of 26 bones arranged into the hindfoot, midfoot, and forefoot, as well as ligaments and muscles. The ankle and foot provide stability and leverage during walking and running. They absorb shock, adapt to terrain, and help propel the body forward. Common injuries include ankle sprains from inversion of the foot, fractures, Achilles tendon injuries, and stress fractures from repetitive loading. The ankle and foot undergo specific motions like dorsiflexion, plantarflexion, and pronation during the gait cycle to aid in stability, shock absorption and propulsion.
Synovial joint
This document discusses the classification of synovial joints based on the shape of their adjoining articular surfaces. It describes the six main types of synovial joints: plane, pivot, hinge, condylar, ellipsoid, saddle, and ball-and-socket. For each joint type, it provides details on the articular surface shape, typical movements allowed, and examples of joints that fall into that classification.
anatomical nomenclature
The document discusses anatomical terminology used to describe body positions and movements. It defines anatomical position as standing erect with arms at sides and feet together. It describes the major body planes (sagittal, coronal, transverse) which divide the body into sections. Key terms are introduced for positions (superior, inferior, proximal, distal), directions (anterior, posterior, medial, lateral), and types of motion (flexion, extension, abduction, adduction, circumduction, supination, pronation, inversion, eversion). Memorization techniques are provided using prefixes and starting letters to aid in recalling anatomical terminology.
Skeletal System and Joints
The document discusses the functions of the skeleton and joints and how they relate to movement in sports. It covers the four main functions of the skeleton as blood production, protection, movement, and providing shape and support. It then focuses on two main types of synovial joints - ball and socket joints, like in the shoulder and hip, which allow circular movement, and hinge joints, like in the elbow and knee, which allow 180 degrees of movement in one direction. Examples are given of how these joints enable movements important for sports like dunking a basketball and kicking a football.
Description of nonaxial movement Description of other types of move.pdf
Description of nonaxial movement Description of other types of movement Part B - Uniaxial
Movement Focus your attention on the section called uniaxial movements in parts (b) and (c) in
Focus Figure 8.1 Drag and drop the terms describing a characteristic of uniaxial movement or
the location in which it is found to appropriate blanks in the sentences.
Solution
Answer:
There are four types of synovial joint movements; Uniaxial, Biaxial, Multiaxial and Nonaxial.
Nonaxial movement: It is a gliding movement; no axix around which movement can occur. At a
plane joint (gliding joint), the articulating surfaces of the bones are flat or slightly curved and of
approximately the same size, which allows the bones to slide against each other.
Example: This type of movement found between the carpal bones (intercarpal joints) of the wrist
or tarsal bones (intertarsal joints) of the foot, between the clavicle and acromion of the scapula
(acromioclavicular joint), and between the superior and inferior articular processes of adjacent
vertebrae (zygapophysial joints).
Uniaxial movement: The movement occurs around one axis; only in one plane.
Example: Pivot and Hinge joints
Biaxial movement: Occuring around two axes at right angle to each other.
Example: Saddle and condyloid joint
At a condyloid joint (ellipsoid joint), the shallow depression at the end of one bone articulates
with a rounded structure from an adjacent bone or bones. One example is the radiocarpal joint of
the wrist, between the shallow depression at the distal end of the radius bone and the rounded
scaphoid, lunate, and triquetrum carpal bones.
At a saddle joint, both of the articulating surfaces for the bones have a saddle shape, which is
concave in one direction and convex in the other. The primary example is the first
carpometacarpal joint, between the trapezium (a carpal bone) and the first metacarpal bone at the
base of the thumb.
Multiaxial movement: The movement occurs around several axes.
Example: Ball and Socket joint
The joint with the greatest range of motion is the ball-and-socket joint. At these joints, the
rounded head of one bone (the ball) fits into the concave articulation (the socket) of the adjacent
bone. The hip joint and the glenohumeral (shoulder) joint are the only ball-and-socket joints of
the body..
Bio-mechanics of the ankle joint
The document discusses the biomechanics of the ankle joint. It describes the ankle's functions of stability and mobility. It details the bony structures that make up the ankle joint, including the talocrual joint and inferior tibiofibular joint. It explains the kinematics of the ankle in dorsiflexion and plantarflexion, including the axis of rotation. It also discusses the muscles, ligaments, and other factors involved in ankle stability and common mechanisms of injury.
Describe the directions and approximate ranges of movement that occu.pdf
Describe the directions and approximate ranges of movement that occur at the joints of the
human body during each of the following movements:
a) Walking
b) Running
c) Performing a jumping jack
d) Rising from a seated position
Solution
Planes of motion:
The sagittal plane motion includes forward and backward motion as it cuts through the centre of
the body so the motion is front to back or back to front including straight forward running. It
includes sit ups back extensions for biceps curls.
frontal plane motion includes leaning from left to right as in side bending and Lateral raises and
in jumping jacks. Moments in display no sideways moments called abduction and adduction.
Transverse plane divides the body into top and bottom rotational in nature such as internal
external rotation pronation and supination. Example swinging a golf Club.
Dorsiflexion and plantar section are movements at the ankle joint which is hinge joint lifting the
front of the foot to move towards the anterior leg is Dorsi flexion while lifting The Hieel from
the ground is plantar flexion.
Inversion is the turning off the foot to angle the bottom of the foot toword the midline while he
was an turns the bottom of the foot away from the midline these are important motions to
stabilize the foot while walking or running..
Biomechanics of knee complex 6 tibiofemoral jt function
The document discusses biomechanics of the knee complex, focusing on tibiofemoral joint function and kinematics. It describes the primary motions of the knee as flexion/extension along with lesser rotations and translations. Flexion/extension occurs through rolling and gliding motions of the femur on the tibia. The cruciate ligaments and menisci help guide these motions while allowing for joint incongruence. Range of motion depends on other factors like flexion angle and involvement of other joints.
Understanding planes and axes of movement
This document discusses planes of movement and axes of rotation in the human body. It defines anatomical terms like anterior, posterior, superior, and inferior. It describes the three planes of motion - sagittal, frontal, and transverse - and the three axes of rotation - sagittal, frontal, and vertical. While individual movements occur in single planes, all functional movements require motion in multiple planes simultaneously. However, most popular exercises in gyms restrict movement to one plane, especially the sagittal plane, neglecting the transverse plane. For training to transfer to activities of daily life and sports, it must incorporate movement in all three planes like the transverse plane.
Biomechanics of knee complex 6 tibiofemoral jt function
This document discusses the biomechanics of the knee complex, focusing on tibiofemoral joint function and kinematics. It describes the primary motions of the knee as flexion/extension along with smaller amounts of medial/lateral rotation and varus/valgus motion. It explains how the cruciate ligaments and menisci facilitate and guide knee motion through rolling and gliding movements. The normal range of motion for flexion/extension is also outlined.
Back and ab (part 1)
This document provides information about muscles of the shoulder girdle, back, abdomen, and vertebral column. It describes the origin, insertion, location, and movements of muscles like the trapezius, rhomboid major and minor, levator scapulae, erector spinae, rectus abdominis, external and internal obliques. It also discusses bony landmarks, curves of the vertebral column, cervical and lumbar joints, and layers of intrinsic back muscles.
Back and ab (part 1) 1
This document provides information about muscles of the shoulder girdle, back, abdomen, and vertebral column. It describes the origin, insertion, location, and movements of muscles like the trapezius, rhomboid major and minor, levator scapulae, erector spinae, rectus abdominis, external and internal obliques. It also discusses bony landmarks, curves of the vertebral column, cervical and lumbar joints, and layers of intrinsic back muscles.
Joints movement and sukshma vyayam
The document discusses joints and exercises. It begins by introducing the different types of joints in the body, including fibrous, cartilaginous, and synovial joints. It then describes the functions of joints and classifications of joints based on movement and tissue type. The six types of synovial joints are defined: ball-and-socket, condyloid, gliding, hinge, pivot, and saddle. Examples of each type of joint are provided. The document concludes by discussing range of motion exercises for different parts of the body and proper techniques for joint exercises.
Identify both the synergist adn antagonist muscles that work at the .pdf
Identify both the synergist adn antagonist muscles that work at the following joints
a. neck and spine
b. hip
c. knee
d. ankle
e. toes
f. scapula
g. shoulder
h. elbow
i. wrist
j. fingers
Solution
ANTAGOINST ; Agonist and antagonist means that the muscle taht a contraction. Antagonist
muscles causes special movement in body. it is not an intrinsic property. It helps to control the
body, rotate the body, slow it down, returns the limbs to its initial position.
SYNERGIST; synergist is a muscle that acts in concert with another to enhance its effect that is
compare agonist 1, antagonist a.
synergist and antagoist muscles that work at the following body joints like ;
Flexion
Extension
Sternocleidomastoid (Bilateral)
oblique capities
rotations: Levator Scapula (To Same Side): Splenius Capitus (To Same Side):Splenius Cervicis
(To Same Side):Rectus Capitis Major (To Same Side); Oblique Capitis Inferior (To Same Side)
Lateral Flexion: Trapezius (Upper Fibers); Levator Scapula; Splenius Capitis; Splenius Cervicis;
Sternocleidomastoi
HIP; Flexion : Rectus Femoris; Gluteus Medius; Gluteus Minimus; Adductor Magnus; Adductor
Longus
Extension: Biceps Femoris; Semitendinosus; Semimembranosus; Gluteus Maximus; Gluteus
Medius
Medial Rotation: Semitendinosus; Semimembranosus; Gluteus Medius
Lateral Rotation: Biceps Femoris; Gluteus Maximus; Gluteus Medius
Abduction: Gluteus Maximus; Gluteus Medius; Gluteus Minimus
Adduction: Adductor Magnus: Adductor Longus: Adductor Brevis
KNEE: Flexion: Biceps Femoris: Semitenidnosus: Semimembranosus: Gracilis
Extension : Rectus Femoris: Vastus Lateralis: Vastus Medialis: Vastus Intermedius
Medial Rotation Of Flexed Knee : Semitendinosus: Semimembranosus: Sartorius: Gracilis
Lateral Rotation Of Flexed Knee : Biceps Femoris
ANKLE: Plantar Flexion: Gastrocnemius: Soleus: Tibialis Posterior: Flexor Digitorum Longus:
Flexor Hallucis Longus.
Dorsiflexion: Tibialis Anterior: Extensor Digitorum Longus: Extensor Hallucis Longus.
TOES: Inversion: Tibialis Anterior: Tibialis Posterior: Flexor Digitorum Longus: Flexor
Hallucis Longus
Eversion: Peroneus Longus: Peroneus Brevis: Extensor Digitorum Longus
Flexion - 2nd Thru 5th Toes: Flexor Digitorum Longus: Flexor Digitorum Brevis (2nd Thru 4th):
Abductor Digiti Minimi (5th)
Extension - 2nd Thru 5th Toes: Extensor Digitorum Longus: Extensor Digitorum Brevis (1st
Thru 4th).
Flexion Of First Toe: Flexor Hallucis Longus: Abductor Hallucis
Extension Of First Toe: Extensor Hallucis Longus
Abduction Of The First Toe: Abductor Hallucis
Abduction Of The Fifth Toe: Abductor Digit Minimi
SCAPLUA: Elevation: Trapezius (Upper Fibers): Rhomboid Major: Rhomboid Minor
Depression: Trapezius (Lower Fibers): Serratus Anterior: Pectoralis Minor
Abduction: Serratus Anterior: Pectoralis Minor
Adduction: Trapezius (Middle Fibers): Rhomboid Major: Rhomboid Minor
ELBOW: Flexion: Biceps Brachii: Brachialis: Brachioradialis: Flexor Carpi Radialis
Extension: Triceps Brachii: Anconeus
WRIST: Flexion : Flexor Carpi R.
HISTORY- Mr- Alcot is a 68 year old man who developed a harsh- product.pdf
HighValu Incorporated manufactures a moderately priced set of lawn furniture (a table and four
chairs) that it sells for $260. The company currently manufactures and sells 6,700 sets per year.
The manufacturing costs include $92 for direct materials and $52 for direct labor per set. The
overhead charge per set is $42, which consists entirely of fixed costs.
HighValu is considering a special purchase offer from a large retail firm, which has offered to
buy 670 sets per year for three years at a price of $178 per set. HighValu has the available plant
capacity to produce the order and expects no other orders or profitable alternative uses of the
plant capacity.
Required:
1. What is the total relevant cost per unit to produce the units requested by the retail firm?
2. What is the estimated net effect on annual operating income if HighValu accepts the special
sales order?.
Histology- Identify the following 3 slides and the parts indicated- a-.pdf
Highlight a problem within the "QUALITY EDUCATION - Ensure inclusive and equitable
quality education and promote lifelong learning opportunities for all" of the UN's Sustainable
Development Goals. Details of the proposal must include a background to the issue you chose,
who or what is affected by it and why there is a need for awareness. Please provide references
used for this proposal following the APA referencing style. 3. Propose a graphical
solution/representation which may alleviate and/or spread awareness of this problem..
More Related Content
Similar to stemum hyoid 9- Match the following types of synovial joints to their.pdf
Oatis c, 1998 biomechanics of the foot and ankle
This document discusses the static biomechanics of the foot and ankle. It describes the axes of motion and terminology for the ankle, subtalar joint, and transverse tarsal joint. There is inconsistent terminology in the literature for motions like pronation, supination, eversion, and inversion. The document recommends using pronation to describe combined dorsiflexion, abduction, and eversion, and supination to describe combined plantar flexion, adduction, and inversion. It also discusses the planes of motion and reviews range of motion values reported in the literature for the ankle and subtalar joints.
Biomechanics of hip complex 2
This document discusses the function and biomechanics of the hip joint. It describes the three motions of the hip joint - flexion/extension, abduction/adduction, and medial/lateral rotation - as movements of the femoral head within the acetabulum. It also discusses pelvic motions including anterior/posterior tilt, lateral tilt, and anterior/posterior rotation which produce the same motions at the hip joint. Compensatory lumbar spine motions that accompany various pelvic motions in weight-bearing are also described.
Unit 8 Ppt
The document discusses the classification and structure of joints in the skeletal system. It describes three types of joints - fibrous, cartilaginous, and synovial joints. Synovial joints are further divided into six categories based on their structure and movement capabilities, including ball-and-socket, hinge, and gliding joints. Examples of various joints like the shoulder, elbow, hip, and knee are provided along with diagrams labeling their structural features.
Joints powerpoint
Joints connect bones together and allow movement. There are over 200 joints in the human body. Joints are classified by their structure and movement. The three main types are fibrous, cartilaginous, and synovial joints. Synovial joints are the most common and movable. They include ball-and-socket, hinge, and gliding joints which allow different types of movement like flexion, extension, and rotation.
Open stax anatomy&physiology ch09
This document provides an overview of the anatomy and physiology of joints in the human body. It includes descriptions of the main types of joints - fibrous, cartilaginous, and synovial joints - along with examples of each. It also summarizes the movements allowed by different synovial joints and describes common joint structures like ligaments, cartilage, and bursae. The document uses diagrams to illustrate key anatomical features of important joints like the knee, shoulder, elbow, hip, ankle, and temporomandibular joint.
GCSE PE Revision: Joints
There are three classifications of joints: fixed/immovable joints, slightly movable joints, and freely movable or synovial joints. The main synovial joints are ball and socket, hinge, and pivot joints. Ball and socket joints allow movement in all directions at the shoulder and hip. Hinge joints only allow movement in two directions, like the knee and elbow. Pivot joints only allow rotation, found at the top of vertebrae in the neck. Each joint type facilitates different movements and can be identified by their structure and motion.
Biomechanics of ankle and foot
The ankle and foot are complex structures that combine flexibility and stability. They consist of 26 bones arranged into the hindfoot, midfoot, and forefoot, as well as ligaments and muscles. The ankle and foot provide stability and leverage during walking and running. They absorb shock, adapt to terrain, and help propel the body forward. Common injuries include ankle sprains from inversion of the foot, fractures, Achilles tendon injuries, and stress fractures from repetitive loading. The ankle and foot undergo specific motions like dorsiflexion, plantarflexion, and pronation during the gait cycle to aid in stability, shock absorption and propulsion.
Synovial joint
This document discusses the classification of synovial joints based on the shape of their adjoining articular surfaces. It describes the six main types of synovial joints: plane, pivot, hinge, condylar, ellipsoid, saddle, and ball-and-socket. For each joint type, it provides details on the articular surface shape, typical movements allowed, and examples of joints that fall into that classification.
anatomical nomenclature
The document discusses anatomical terminology used to describe body positions and movements. It defines anatomical position as standing erect with arms at sides and feet together. It describes the major body planes (sagittal, coronal, transverse) which divide the body into sections. Key terms are introduced for positions (superior, inferior, proximal, distal), directions (anterior, posterior, medial, lateral), and types of motion (flexion, extension, abduction, adduction, circumduction, supination, pronation, inversion, eversion). Memorization techniques are provided using prefixes and starting letters to aid in recalling anatomical terminology.
Skeletal System and Joints
The document discusses the functions of the skeleton and joints and how they relate to movement in sports. It covers the four main functions of the skeleton as blood production, protection, movement, and providing shape and support. It then focuses on two main types of synovial joints - ball and socket joints, like in the shoulder and hip, which allow circular movement, and hinge joints, like in the elbow and knee, which allow 180 degrees of movement in one direction. Examples are given of how these joints enable movements important for sports like dunking a basketball and kicking a football.
Description of nonaxial movement Description of other types of move.pdf
Description of nonaxial movement Description of other types of movement Part B - Uniaxial
Movement Focus your attention on the section called uniaxial movements in parts (b) and (c) in
Focus Figure 8.1 Drag and drop the terms describing a characteristic of uniaxial movement or
the location in which it is found to appropriate blanks in the sentences.
Solution
Answer:
There are four types of synovial joint movements; Uniaxial, Biaxial, Multiaxial and Nonaxial.
Nonaxial movement: It is a gliding movement; no axix around which movement can occur. At a
plane joint (gliding joint), the articulating surfaces of the bones are flat or slightly curved and of
approximately the same size, which allows the bones to slide against each other.
Example: This type of movement found between the carpal bones (intercarpal joints) of the wrist
or tarsal bones (intertarsal joints) of the foot, between the clavicle and acromion of the scapula
(acromioclavicular joint), and between the superior and inferior articular processes of adjacent
vertebrae (zygapophysial joints).
Uniaxial movement: The movement occurs around one axis; only in one plane.
Example: Pivot and Hinge joints
Biaxial movement: Occuring around two axes at right angle to each other.
Example: Saddle and condyloid joint
At a condyloid joint (ellipsoid joint), the shallow depression at the end of one bone articulates
with a rounded structure from an adjacent bone or bones. One example is the radiocarpal joint of
the wrist, between the shallow depression at the distal end of the radius bone and the rounded
scaphoid, lunate, and triquetrum carpal bones.
At a saddle joint, both of the articulating surfaces for the bones have a saddle shape, which is
concave in one direction and convex in the other. The primary example is the first
carpometacarpal joint, between the trapezium (a carpal bone) and the first metacarpal bone at the
base of the thumb.
Multiaxial movement: The movement occurs around several axes.
Example: Ball and Socket joint
The joint with the greatest range of motion is the ball-and-socket joint. At these joints, the
rounded head of one bone (the ball) fits into the concave articulation (the socket) of the adjacent
bone. The hip joint and the glenohumeral (shoulder) joint are the only ball-and-socket joints of
the body..
Bio-mechanics of the ankle joint
The document discusses the biomechanics of the ankle joint. It describes the ankle's functions of stability and mobility. It details the bony structures that make up the ankle joint, including the talocrual joint and inferior tibiofibular joint. It explains the kinematics of the ankle in dorsiflexion and plantarflexion, including the axis of rotation. It also discusses the muscles, ligaments, and other factors involved in ankle stability and common mechanisms of injury.
Describe the directions and approximate ranges of movement that occu.pdf
Describe the directions and approximate ranges of movement that occur at the joints of the
human body during each of the following movements:
a) Walking
b) Running
c) Performing a jumping jack
d) Rising from a seated position
Solution
Planes of motion:
The sagittal plane motion includes forward and backward motion as it cuts through the centre of
the body so the motion is front to back or back to front including straight forward running. It
includes sit ups back extensions for biceps curls.
frontal plane motion includes leaning from left to right as in side bending and Lateral raises and
in jumping jacks. Moments in display no sideways moments called abduction and adduction.
Transverse plane divides the body into top and bottom rotational in nature such as internal
external rotation pronation and supination. Example swinging a golf Club.
Dorsiflexion and plantar section are movements at the ankle joint which is hinge joint lifting the
front of the foot to move towards the anterior leg is Dorsi flexion while lifting The Hieel from
the ground is plantar flexion.
Inversion is the turning off the foot to angle the bottom of the foot toword the midline while he
was an turns the bottom of the foot away from the midline these are important motions to
stabilize the foot while walking or running..
Biomechanics of knee complex 6 tibiofemoral jt function
The document discusses biomechanics of the knee complex, focusing on tibiofemoral joint function and kinematics. It describes the primary motions of the knee as flexion/extension along with lesser rotations and translations. Flexion/extension occurs through rolling and gliding motions of the femur on the tibia. The cruciate ligaments and menisci help guide these motions while allowing for joint incongruence. Range of motion depends on other factors like flexion angle and involvement of other joints.
Understanding planes and axes of movement
This document discusses planes of movement and axes of rotation in the human body. It defines anatomical terms like anterior, posterior, superior, and inferior. It describes the three planes of motion - sagittal, frontal, and transverse - and the three axes of rotation - sagittal, frontal, and vertical. While individual movements occur in single planes, all functional movements require motion in multiple planes simultaneously. However, most popular exercises in gyms restrict movement to one plane, especially the sagittal plane, neglecting the transverse plane. For training to transfer to activities of daily life and sports, it must incorporate movement in all three planes like the transverse plane.
Biomechanics of knee complex 6 tibiofemoral jt function
This document discusses the biomechanics of the knee complex, focusing on tibiofemoral joint function and kinematics. It describes the primary motions of the knee as flexion/extension along with smaller amounts of medial/lateral rotation and varus/valgus motion. It explains how the cruciate ligaments and menisci facilitate and guide knee motion through rolling and gliding movements. The normal range of motion for flexion/extension is also outlined.
Back and ab (part 1)
This document provides information about muscles of the shoulder girdle, back, abdomen, and vertebral column. It describes the origin, insertion, location, and movements of muscles like the trapezius, rhomboid major and minor, levator scapulae, erector spinae, rectus abdominis, external and internal obliques. It also discusses bony landmarks, curves of the vertebral column, cervical and lumbar joints, and layers of intrinsic back muscles.
Back and ab (part 1) 1
This document provides information about muscles of the shoulder girdle, back, abdomen, and vertebral column. It describes the origin, insertion, location, and movements of muscles like the trapezius, rhomboid major and minor, levator scapulae, erector spinae, rectus abdominis, external and internal obliques. It also discusses bony landmarks, curves of the vertebral column, cervical and lumbar joints, and layers of intrinsic back muscles.
Joints movement and sukshma vyayam
The document discusses joints and exercises. It begins by introducing the different types of joints in the body, including fibrous, cartilaginous, and synovial joints. It then describes the functions of joints and classifications of joints based on movement and tissue type. The six types of synovial joints are defined: ball-and-socket, condyloid, gliding, hinge, pivot, and saddle. Examples of each type of joint are provided. The document concludes by discussing range of motion exercises for different parts of the body and proper techniques for joint exercises.
Identify both the synergist adn antagonist muscles that work at the .pdf
Identify both the synergist adn antagonist muscles that work at the following joints
a. neck and spine
b. hip
c. knee
d. ankle
e. toes
f. scapula
g. shoulder
h. elbow
i. wrist
j. fingers
Solution
ANTAGOINST ; Agonist and antagonist means that the muscle taht a contraction. Antagonist
muscles causes special movement in body. it is not an intrinsic property. It helps to control the
body, rotate the body, slow it down, returns the limbs to its initial position.
SYNERGIST; synergist is a muscle that acts in concert with another to enhance its effect that is
compare agonist 1, antagonist a.
synergist and antagoist muscles that work at the following body joints like ;
Flexion
Extension
Sternocleidomastoid (Bilateral)
oblique capities
rotations: Levator Scapula (To Same Side): Splenius Capitus (To Same Side):Splenius Cervicis
(To Same Side):Rectus Capitis Major (To Same Side); Oblique Capitis Inferior (To Same Side)
Lateral Flexion: Trapezius (Upper Fibers); Levator Scapula; Splenius Capitis; Splenius Cervicis;
Sternocleidomastoi
HIP; Flexion : Rectus Femoris; Gluteus Medius; Gluteus Minimus; Adductor Magnus; Adductor
Longus
Extension: Biceps Femoris; Semitendinosus; Semimembranosus; Gluteus Maximus; Gluteus
Medius
Medial Rotation: Semitendinosus; Semimembranosus; Gluteus Medius
Lateral Rotation: Biceps Femoris; Gluteus Maximus; Gluteus Medius
Abduction: Gluteus Maximus; Gluteus Medius; Gluteus Minimus
Adduction: Adductor Magnus: Adductor Longus: Adductor Brevis
KNEE: Flexion: Biceps Femoris: Semitenidnosus: Semimembranosus: Gracilis
Extension : Rectus Femoris: Vastus Lateralis: Vastus Medialis: Vastus Intermedius
Medial Rotation Of Flexed Knee : Semitendinosus: Semimembranosus: Sartorius: Gracilis
Lateral Rotation Of Flexed Knee : Biceps Femoris
ANKLE: Plantar Flexion: Gastrocnemius: Soleus: Tibialis Posterior: Flexor Digitorum Longus:
Flexor Hallucis Longus.
Dorsiflexion: Tibialis Anterior: Extensor Digitorum Longus: Extensor Hallucis Longus.
TOES: Inversion: Tibialis Anterior: Tibialis Posterior: Flexor Digitorum Longus: Flexor
Hallucis Longus
Eversion: Peroneus Longus: Peroneus Brevis: Extensor Digitorum Longus
Flexion - 2nd Thru 5th Toes: Flexor Digitorum Longus: Flexor Digitorum Brevis (2nd Thru 4th):
Abductor Digiti Minimi (5th)
Extension - 2nd Thru 5th Toes: Extensor Digitorum Longus: Extensor Digitorum Brevis (1st
Thru 4th).
Flexion Of First Toe: Flexor Hallucis Longus: Abductor Hallucis
Extension Of First Toe: Extensor Hallucis Longus
Abduction Of The First Toe: Abductor Hallucis
Abduction Of The Fifth Toe: Abductor Digit Minimi
SCAPLUA: Elevation: Trapezius (Upper Fibers): Rhomboid Major: Rhomboid Minor
Depression: Trapezius (Lower Fibers): Serratus Anterior: Pectoralis Minor
Abduction: Serratus Anterior: Pectoralis Minor
Adduction: Trapezius (Middle Fibers): Rhomboid Major: Rhomboid Minor
ELBOW: Flexion: Biceps Brachii: Brachialis: Brachioradialis: Flexor Carpi Radialis
Extension: Triceps Brachii: Anconeus
WRIST: Flexion : Flexor Carpi R.
Similar to stemum hyoid 9- Match the following types of synovial joints to their.pdf (20)
Description of nonaxial movement Description of other types of move.pdf
Description of nonaxial movement Description of other types of move.pdf
Describe the directions and approximate ranges of movement that occu.pdf
Describe the directions and approximate ranges of movement that occu.pdf
Biomechanics of knee complex 6 tibiofemoral jt function
Biomechanics of knee complex 6 tibiofemoral jt function
Biomechanics of knee complex 6 tibiofemoral jt function
Biomechanics of knee complex 6 tibiofemoral jt function
Identify both the synergist adn antagonist muscles that work at the .pdf
Identify both the synergist adn antagonist muscles that work at the .pdf
More from doshirajesh75
HISTORY- Mr- Alcot is a 68 year old man who developed a harsh- product.pdf
HighValu Incorporated manufactures a moderately priced set of lawn furniture (a table and four
chairs) that it sells for $260. The company currently manufactures and sells 6,700 sets per year.
The manufacturing costs include $92 for direct materials and $52 for direct labor per set. The
overhead charge per set is $42, which consists entirely of fixed costs.
HighValu is considering a special purchase offer from a large retail firm, which has offered to
buy 670 sets per year for three years at a price of $178 per set. HighValu has the available plant
capacity to produce the order and expects no other orders or profitable alternative uses of the
plant capacity.
Required:
1. What is the total relevant cost per unit to produce the units requested by the retail firm?
2. What is the estimated net effect on annual operating income if HighValu accepts the special
sales order?.
Histology- Identify the following 3 slides and the parts indicated- a-.pdf
Highlight a problem within the "QUALITY EDUCATION - Ensure inclusive and equitable
quality education and promote lifelong learning opportunities for all" of the UN's Sustainable
Development Goals. Details of the proposal must include a background to the issue you chose,
who or what is affected by it and why there is a need for awareness. Please provide references
used for this proposal following the APA referencing style. 3. Propose a graphical
solution/representation which may alleviate and/or spread awareness of this problem..
Hi- I need help with these two questions The flat periwinkle is a sma.pdf
Hi. I have trouble with my java code. I can't figure out how to proceed with the following task
step. and there is something wrong with my savebutton. It's either the save method in class
PhoneBook or how it's wired in class GUI to the method save.
The code is simple I have one class Person, PhoneBook, GUI, and a txt file called PhoneList.
You write in the textfield PhoneList.txt then press Load button, it hsould say Phone book loaded,
then you press Save button, then it says provide a new for file, you can write anything you like
for example oooga.txt and it should make the oooga.txt file and save from the PhoneList.txt to
the ooog.txt file and state how many saved people it saved over to the new file. the rest of the
information is in the task below. Below is 2 pictures, one for the task, one for the class Person,
and two texts where you can copy paste the code directly for PhoneBook and GUI class, so you
don't have to rewrite them. You are allowed to change anything you like except for the methods
name in any class or add new methods and change their type and parameters within Person and
PhoneBook class.
[THis is the TASK]
[This is class Person]
[This is Class PhoneBook]
package lab6;
import java.io.BufferedReader;
import java.io.FileReader;
import java.io.FileWriter;
import java.io.IOException;
import java.util.ArrayList;
public class PhoneBook {
private ArrayList<Person> listOfNumbers;
public PhoneBook() {
listOfNumbers = new ArrayList<>();
}
public String load(String arg) {
try {
BufferedReader reader = new BufferedReader(new FileReader("F:\\Java
Codes\\TND002Labs6\\src\\lab6\\" + arg));
String line = reader.readLine();
while (line != null) {
String[] parts = line.split(",");
if (parts.length == 3) {
String givenName = parts[0].trim();
String surname = parts[1].trim();
int phoneNumber = Integer.parseInt(parts[2].trim());
listOfNumbers.add(new Person(givenName, surname, phoneNumber));
}
line = reader.readLine();
}
reader.close();
return "Phone book loaded";
} catch (IOException e) {
return "Try again";
}
}
public ArrayList<Person> search(String arg) {
ArrayList<Person> result = new ArrayList<>();
for (Person person : listOfNumbers) {
if (person.getSurname().equals(arg) || person.getPhoneNumber() == Integer.parseInt(arg)) {
result.add(person);
}
}
return result;
}
public String deletePerson(String arg1, int arg2) {
ArrayList<Person> searchResult = search(Integer.toString(arg2));
for (Person person : searchResult) {
if (person.getFullName().equals(arg1)) {
listOfNumbers.remove(person);
return "Person deleted";
}
}
return "The person/number does not exist";
}
public boolean addPerson(String arg1, int arg2) {
if (arg1.trim().split(" ").length != 2) {
return false;
}
for (Person person : listOfNumbers) {
if (person.getPhoneNumber() == arg2) {
return false;
}
}
String[] nameParts = arg1.trim().split(" ");
String givenName = nameParts[0];
String surname = nameParts[1];
listOfNumbers.add(new Person(givenName, surname, arg2));
return true;
}
publ.
High lactate threshold High type II fiber percentage High VO2 max High.pdf
hi, the last photo attached contains the r chart and x chart answer for question 4. the x
chart shows the average response times and the r chart shows the range of response
times. thank you and please let me know if there is still needed info.
I've added the excel graphs and charts already. i just could use help answering the
question with the information already given. thanks.
Penn Medical Ambulance Service Corporation Penn Medical Ambulance Service Corporation is
one of the several area companies that provides ambulance service that transports patients to area
hospitals in the greater Philadelphia area. It is extremely important to transport patients to the
medical facilities/hospitals in the shortest possible time, especially in life and death situations
such as patients who have heart attacks or gunshot wounds. Although Penn Medical had always
provided superior services in the past, recent surveys have shown that Penn Medical has been
lagging behind its competitors in providing superior service. In order to compete more
effectively, Penn Medical had added a new ambulance to its fleet but the service apparently only
improved marginally. Given the current financial conditions of the company, top management is
unable to further add more workers nor ambulances. Given this situation, top management has
decided to set up a quality team made up of employees, managers, and quality specialists from
company headquarters. Using traditional quality tools such as checksheets, Pareto charts,
flowcharts and fishbone diagrams, the quality team have determined that the primary problems
under current conditions are slow and erratic response times when compared to its competitors.
Their preliminary studies indicated that their current response times average 11.9 minutes. To be
competitive, management believes that response times should be reduced by at least 2 minutes or
more. In addition, top management is also concerned about the irregular response times. Even
though the average response times may be at the desired level, large variations in response times
in any particular day are also deemed very undesirable as some patients will suffer irreparable
medical consequences if the response times are too long. Therefore, top management has
instructed the quality team to look into this issue. In the meantime, Penn Medical's top
management solicited inputs from the quality team and has implemented a number of
suggestions to the operation to reduce their ambulance response times. These suggestions include
improved communication systems and new equipment as well as clearer instructions for its
personnel. These steps not only improved service speed but also provided employees with a
constant reminder that patients are waiting for this critical service. These quality improvements
were implemented over several months and their positive effects were observed. In order to
maintain superior service and confirm these observations, top management at Penn Medical has
deci.
Here is the code- I can't get it to work- I need a function that finds.pdf
Here is the code: I can't get it to work. I need a function that finds the maximum of two integers.
#include <stdio.h>
#include <stdlib.h>
#include <limits.h>
/* declare global variables including a table structure to hold scheduling
information */
/* optional: define a function that finds the maximum of two integers */
int total_processes = 0;
struct node{
int id;
int arrival;
int total_cycles;
int total_remaining;
int done;
int start;
int already_started;
int end;
int turnaround;
}* table = NULL;
typedef struct node table_type;
/***************************************************************/
void print_table() {
/*
1.declare local variables
2. print table header
3. for each process
4. print the contents (id, arrival time, total_cycles) of
each field of the table's index
5. if process has been scheduled ("done" field is 1,
6. print other contents (start time, end time, turnaround time)
*/
printf("ID/tArrival/tTotal/tStart/tEnd/tTurnaround/n");
printf("--------------------------------------------\n");
int i;
for(i=0; i < total_processes; i++){
printf("%d\t", table[i].id);
printf("%d\t", table[i].arrival);
printf("%d\t", table[i].total_cycles);
printf("%d\t", table[i].start);
printf("%d\t", table[i].end);
printf("%d\t", table[i].turnaround);
}
return;
}
/***************************************************************/
void procedure_1() {
/*"PROCEDURE FOR OPTION #1"
/* declare local variables */
/* prompt for total number of processes */
/* allocate memory for table to hold process parameters */
/* for each process */
/* prompt for process id, arrival time, and total cycle
time */
/* print contents of table */
int i;
printf("Enter total number of processes: ");
scanf("%d", &table[i].arrival);
table = (table_type *)malloc(total_processes * sizeof(table_type));
for(i = 0; i < total_processes; i++){
int arrival = -1;
int total_cycles = -1;
printf("Enter process id: ");
scanf("%d", &table[i].id);
}
printf("Enter arrival cycle for process P[%d]: ", i);
scanf("%d", &table[i].total_cycles);
/*
table[i].id = i;
table[i].arrival = -1;
table[i].total_cycles = -1;
table[i].start = -1;
table[i].end = -1;
table[i].turnaround = -1;
*/
print_table();
return;
}
/***************************************************************/
void procedure_2() {
/* "PROCEDURE FOR OPTION #2"
/* declare (and initilize when appropriate) local variables */
/* for each process, reset "done" field to 0 */
/* while there are still processes to schedule */
/* initilize the earliest arrival time to INT_MAX
(largest integer value) */
/* for each process not yet scheduled */
/* check if process has earlier arrival time
than current earliest and update */
/* set start time, end time, turnaround time, done fields
for unscheduled process with earliest arrival time */
/* update current cycle time and increment number of
processes scheduled */
/* print contents of table */
int i;
int done;
int min_value;
int current_cycle = 0;
int max;
int min_index;
table[i].done = 0;
while(done < 1){
min.
Here are simplified financial statements for Phone Corporation in a re (1).pdf
Here are simplified financial statements for Phone Corporation in a recent year: BALANCE
SHEET (Figures in \$ millions) End of Start of Year Year Assets Cash and marketable securities
Receivables Inventories Other current assets Total current assets Net property, plant, and
equipment other long-term assets Total assets Liabilities and shareholders' equity Payables
Short-term debt Other current liabilities Total current liabilities Long-term debt and leases Other
long-term liabilities Shareholders' equity Total liabilities and shareholders' equity Calculate the
following financial ratios for Phone Corporation: (Use 365 days in a year. Do not round
intermediate calculations. Round your final answers to 2 decimal places.).
HIPPARCOS (an acronym for HIgh Precision PARallax COllecting Satellite (1).pdf
HIPPARCOS was a European Space Agency mission that precisely measured star positions and distances. It measured a star's parallax shift as 0.145 arcseconds. The distance to this star is 6.87 light-years.
Hippocampal LTP-induced increases in transcription- Are primarily the.pdf
High-Performance work team analysis;
You are to draw upon eperience with a team. Keep in mind that this team may be memorable
because it is considered succesful or, it is a team that has not performeed well, but somehow
accomplished some of its goals. Consider using the Week 1 content related discussion..
Suppose an individuifhas a utiity function given by U(W)- en0-5w where.pdf
Suppose an individuifhas a utiity function given by U ( W ) = en0.5w where W is their wealth.
They have the opportunity to invest in a risky asset hat has a 50% chance of yielding a return of
200% and a 50% chance of yielding a return of - 50%6 . What is the expected utility of the
investment or this individual in terms of W?.
Suppose an XX individual and an XY individual are trying to conceive a.pdf
Suppose an XX individual and an XY individual are trying to conceive a child, but are
unsuccessful and go to an infertility specialist. They discover that one individual has a
duplication of the enhancer region for Sox9 on chromosome 17, while the other has a partial
deletion of that same enhancer region. Which individual (XX or XY) has the deletion and which
has the duplication? Explain why in 2-4 sentences based on the function of Sox9 in sex
determination? (Refer to the pathways depicted in Figure 6.4 if you need a hint!).
Suppose an attacker has managed to gain access and a means of distribu.pdf
Suppose an attacker has managed to gain access and a means of distributing the public key
certificate of a website. He decides to replace the public key value in the certificate with his own
public key. Describe whether or not this is an effective digital signature forgery along with
detailed reasoning to justify your answer..
Suppose an individual has a utility function given by U(W) - e^0-5w wh.pdf
Suppose an individual has a utility function given by U(W) = e^0.5w where W is their wealth.
They have the opportunity to invest in a risky asset that has a 50% chance of yielding a return of
200% and a 50% chance of yielding a return of -50%. What is the expected utility of the
investment for this individual in terms of W? For the toolbar, press ALT+F10 (PC) or
ALT+FN+F10 (Mac)..
Suppose Alice wants to send a message to Bob containing her name (N) a.pdf
Suppose Alice wants to send a message to Bob containing her name (N) and a request (R) for
Bob. Alice uses a message authentication code MAC ( N R ) to send the message to Bob.
Assume that Alice and Bob share a symmetric key k A B and have agreed on using a specific
algorithm MAC_func which takes input parameters N R and k A B to produce MAC ( N R ) A)
Outline the steps that Alice must follow for sending the message to Bob. B) Outline the steps that
recipient Bob must follow for verifying the authenticity of message. C) MAC proves to Bob that
a received message is authentic. Explain why? D) Bob is unable to prove to a third party that the
message is authentic. Explain why?.
Suppose a small economy produces only smart TVs- In year one- 100-000.pdf
Suppose a small economy produces only smart TVs. In year one, 100,000 TVs are produced and
sold at a price of $1,200 each. In year two, 125,000 TVs are produced and sold at a price of
$1,000 each. As a result,
A. real GDP increased
B. real GDP stayed the same
C. real GDP decreased
D. nominal GDP decreased.
Sunland Corporation has income from continuing operations of $270-000.pdf
Sunland Corporation has income from continuing operations of $270 , 000 for the year ended
December 31,2022 . It also has the following items (before considering income taxes). 1. An
unrealized loss of $87 , 000 on available-for-sale securities. 2. A gain of $40 , 000 on the
discontinuance of a division (comprised of a $10 , 000 loss from operations and a $50 , 000 gain
on disposal). Assume all items are subject to income taxes at a 18% tax rate. Prepare a partial
income statement, beginning with income from continuing operations, and a statement of
comprehensive income. (Enter loss using cither a negative sign preceding the number e. 2 , 945
or parentheses eg. (2.945)).
Sunvise Garden Center buys 375 bags of fertizer per month for leeding.pdf
Sunvise Garden Center buys 375 bags of fertizer per month for leeding and weeding lawns The
ordering cost is $10.50 . Holding cost is 5025 per bag per year a. How many bags should Sunrise
order at a time? Suntise should order bags at a time (Enter your response rounded to the negrest
whole number) b. What is the time betwoen orders? The time between orders is months (Enter
your response rounded to one decimal place).
Succinate is transformed into oxaloacetate by a series of _______ reac.pdf
Succinate is transformed into oxaloacetate by a series of _______ reactions.
1. phosphorylation and dehydration
2. phophorylation and oxidation
3. reduction and dehydration
4. oxidation and hydration
1. phosphorylation and dehydration
2. phophorylation and oxidation
3. reduction and dehydration
4. oxidation and hydration.
Summarize the internal control procedure of maintaining adequate recor.pdf
Summarize the internal control procedure of maintaining adequate records by selecting the
correct answers below. (Check all that apply.) Bonding employees reduces the risk of loss.
Dividing responsibility for related transactions reduces the occurrence of recordkeeping errors.
Reliable records are a source of information that managers use to monitor activities. Keeping
detailed records makes it unlikely that assets are lost or stolen without detection..
Sum of scores Sum of squared scores Sample size Mean.pdf
Sum of scores Sum of squared scores Sample size Mean Standard deviation Source df SS MS F
Condition Error Total F-crit Your data set Condition Quiz Score 1 1 2 11 1 3 1 6 1 2 2 10 2 8 2
10.
SUBJECT- HIM204 Quality Assurance Explain what other different steps.pdf
SUBJECT: HIM204 Quality Assurance
Explain what other different steps to the implementation process can make things more easier..
Which one is the most interesting to you and why? What's the importance of why
implementation process is important and what major role that it plays!.
More from doshirajesh75 (20)
HISTORY- Mr- Alcot is a 68 year old man who developed a harsh- product.pdf
HISTORY- Mr- Alcot is a 68 year old man who developed a harsh- product.pdf
Histology- Identify the following 3 slides and the parts indicated- a-.pdf
Histology- Identify the following 3 slides and the parts indicated- a-.pdf
Hi- I need help with these two questions The flat periwinkle is a sma.pdf
Hi- I need help with these two questions The flat periwinkle is a sma.pdf
High lactate threshold High type II fiber percentage High VO2 max High.pdf
High lactate threshold High type II fiber percentage High VO2 max High.pdf
Here is the code- I can't get it to work- I need a function that finds.pdf
Here is the code- I can't get it to work- I need a function that finds.pdf
Here are simplified financial statements for Phone Corporation in a re (1).pdf
Here are simplified financial statements for Phone Corporation in a re (1).pdf
HIPPARCOS (an acronym for HIgh Precision PARallax COllecting Satellite (1).pdf
HIPPARCOS (an acronym for HIgh Precision PARallax COllecting Satellite (1).pdf
Hippocampal LTP-induced increases in transcription- Are primarily the.pdf
Hippocampal LTP-induced increases in transcription- Are primarily the.pdf
Suppose an individuifhas a utiity function given by U(W)- en0-5w where.pdf
Suppose an individuifhas a utiity function given by U(W)- en0-5w where.pdf
Suppose an XX individual and an XY individual are trying to conceive a.pdf
Suppose an XX individual and an XY individual are trying to conceive a.pdf
Suppose an attacker has managed to gain access and a means of distribu.pdf
Suppose an attacker has managed to gain access and a means of distribu.pdf
Suppose an individual has a utility function given by U(W) - e^0-5w wh.pdf
Suppose an individual has a utility function given by U(W) - e^0-5w wh.pdf
Suppose Alice wants to send a message to Bob containing her name (N) a.pdf
Suppose Alice wants to send a message to Bob containing her name (N) a.pdf
Suppose a small economy produces only smart TVs- In year one- 100-000.pdf
Suppose a small economy produces only smart TVs- In year one- 100-000.pdf
Sunland Corporation has income from continuing operations of $270-000.pdf
Sunland Corporation has income from continuing operations of $270-000.pdf
Sunvise Garden Center buys 375 bags of fertizer per month for leeding.pdf
Sunvise Garden Center buys 375 bags of fertizer per month for leeding.pdf
Succinate is transformed into oxaloacetate by a series of _______ reac.pdf
Succinate is transformed into oxaloacetate by a series of _______ reac.pdf
Summarize the internal control procedure of maintaining adequate recor.pdf
Summarize the internal control procedure of maintaining adequate recor.pdf
Sum of scores Sum of squared scores Sample size Mean.pdf
Sum of scores Sum of squared scores Sample size Mean.pdf
SUBJECT- HIM204 Quality Assurance Explain what other different steps.pdf
SUBJECT- HIM204 Quality Assurance Explain what other different steps.pdf
Recently uploaded
Wound healing PPT
This document provides an overview of wound healing, its functions, stages, mechanisms, factors affecting it, and complications.
A wound is a break in the integrity of the skin or tissues, which may be associated with disruption of the structure and function.
Healing is the body’s response to injury in an attempt to restore normal structure and functions.
Healing can occur in two ways: Regeneration and Repair
There are 4 phases of wound healing: hemostasis, inflammation, proliferation, and remodeling. This document also describes the mechanism of wound healing. Factors that affect healing include infection, uncontrolled diabetes, poor nutrition, age, anemia, the presence of foreign bodies, etc.
Complications of wound healing like infection, hyperpigmentation of scar, contractures, and keloid formation.
Bossa N’ Roll Records by Ismael Vazquez.
Bossa N Roll Records presentation by Izzy Vazquez for Music Retail and Distribution class at Full Sail University
CHUYÊN ĐỀ ÔN TẬP VÀ PHÁT TRIỂN CÂU HỎI TRONG ĐỀ MINH HỌA THI TỐT NGHIỆP THPT ...
CHUYÊN ĐỀ ÔN TẬP VÀ PHÁT TRIỂN CÂU HỎI TRONG ĐỀ MINH HỌA THI TỐT NGHIỆP THPT ...Nguyen Thanh Tu Collection
https://app.box.com/s/qspvswamcohjtbvbbhjad04lg65waylfHYPERTENSION - SLIDE SHARE PRESENTATION.
IT WILL BE HELPFULL FOR THE NUSING STUDENTS
IT FOCUSED ON MEDICAL MANAGEMENT AND NURSING MANAGEMENT.
HIGHLIGHTS ON HEALTH EDUCATION.
skeleton System.pdf (skeleton system wow)
🔥🔥🔥🔥🔥🔥🔥🔥🔥
إضغ بين إيديكم من أقوى الملازم التي صممتها
ملزمة تشريح الجهاز الهيكلي (نظري 3)
💀💀💀💀💀💀💀💀💀💀
تتميز هذهِ الملزمة بعِدة مُميزات :
1- مُترجمة ترجمة تُناسب جميع المستويات
2- تحتوي على 78 رسم توضيحي لكل كلمة موجودة بالملزمة (لكل كلمة !!!!)
#فهم_ماكو_درخ
3- دقة الكتابة والصور عالية جداً جداً جداً
4- هُنالك بعض المعلومات تم توضيحها بشكل تفصيلي جداً (تُعتبر لدى الطالب أو الطالبة بإنها معلومات مُبهمة ومع ذلك تم توضيح هذهِ المعلومات المُبهمة بشكل تفصيلي جداً
5- الملزمة تشرح نفسها ب نفسها بس تكلك تعال اقراني
6- تحتوي الملزمة في اول سلايد على خارطة تتضمن جميع تفرُعات معلومات الجهاز الهيكلي المذكورة في هذهِ الملزمة
واخيراً هذهِ الملزمة حلالٌ عليكم وإتمنى منكم إن تدعولي بالخير والصحة والعافية فقط
كل التوفيق زملائي وزميلاتي ، زميلكم محمد الذهبي 💊💊
🔥🔥🔥🔥🔥🔥🔥🔥🔥
Benner "Expanding Pathways to Publishing Careers"
This presentation was provided by Rebecca Benner, Ph.D., of the American Society of Anesthesiologists, for the second session of NISO's 2024 Training Series "DEIA in the Scholarly Landscape." Session Two: 'Expanding Pathways to Publishing Careers,' was held June 13, 2024.
Accounting for Restricted Grants When and How To Record Properly
In this webinar, member learned how to stay in compliance with generally accepted accounting principles (GAAP) for restricted grants.
Temple of Asclepius in Thrace. Excavation results
The temple and the sanctuary around were dedicated to Asklepios Zmidrenus. This name has been known since 1875 when an inscription dedicated to him was discovered in Rome. The inscription is dated in 227 AD and was left by soldiers originating from the city of Philippopolis (modern Plovdiv).
Leveraging Generative AI to Drive Nonprofit Innovation
In this webinar, participants learned how to utilize Generative AI to streamline operations and elevate member engagement. Amazon Web Service experts provided a customer specific use cases and dived into low/no-code tools that are quick and easy to deploy through Amazon Web Service (AWS.)
مصحف القراءات العشر أعد أحرف الخلاف سمير بسيوني.pdf
مصحف أحرف الخلاف للقراء العشرةأعد أحرف الخلاف بالتلوين وصلا سمير بسيوني غفر الله له
CapTechTalks Webinar Slides June 2024 Donovan Wright.pptx
Slides from a Capitol Technology University webinar held June 20, 2024. The webinar featured Dr. Donovan Wright, presenting on the Department of Defense Digital Transformation.
A Visual Guide to 1 Samuel | A Tale of Two Hearts
These slides walk through the story of 1 Samuel. Samuel is the last judge of Israel. The people reject God and want a king. Saul is anointed as the first king, but he is not a good king. David, the shepherd boy is anointed and Saul is envious of him. David shows honor while Saul continues to self destruct.
How Barcodes Can Be Leveraged Within Odoo 17
In this presentation, we will explore how barcodes can be leveraged within Odoo 17 to streamline our manufacturing processes. We will cover the configuration steps, how to utilize barcodes in different manufacturing scenarios, and the overall benefits of implementing this technology.
THE SACRIFICE HOW PRO-PALESTINE PROTESTS STUDENTS ARE SACRIFICING TO CHANGE T...
The recent surge in pro-Palestine student activism has prompted significant responses from universities, ranging from negotiations and divestment commitments to increased transparency about investments in companies supporting the war on Gaza. This activism has led to the cessation of student encampments but also highlighted the substantial sacrifices made by students, including academic disruptions and personal risks. The primary drivers of these protests are poor university administration, lack of transparency, and inadequate communication between officials and students. This study examines the profound emotional, psychological, and professional impacts on students engaged in pro-Palestine protests, focusing on Generation Z's (Gen-Z) activism dynamics. This paper explores the significant sacrifices made by these students and even the professors supporting the pro-Palestine movement, with a focus on recent global movements. Through an in-depth analysis of printed and electronic media, the study examines the impacts of these sacrifices on the academic and personal lives of those involved. The paper highlights examples from various universities, demonstrating student activism's long-term and short-term effects, including disciplinary actions, social backlash, and career implications. The researchers also explore the broader implications of student sacrifices. The findings reveal that these sacrifices are driven by a profound commitment to justice and human rights, and are influenced by the increasing availability of information, peer interactions, and personal convictions. The study also discusses the broader implications of this activism, comparing it to historical precedents and assessing its potential to influence policy and public opinion. The emotional and psychological toll on student activists is significant, but their sense of purpose and community support mitigates some of these challenges. However, the researchers call for acknowledging the broader Impact of these sacrifices on the future global movement of FreePalestine.
How to Manage Reception Report in Odoo 17
A business may deal with both sales and purchases occasionally. They buy things from vendors and then sell them to their customers. Such dealings can be confusing at times. Because multiple clients may inquire about the same product at the same time, after purchasing those products, customers must be assigned to them. Odoo has a tool called Reception Report that can be used to complete this assignment. By enabling this, a reception report comes automatically after confirming a receipt, from which we can assign products to orders.
Recently uploaded (20)
CHUYÊN ĐỀ ÔN TẬP VÀ PHÁT TRIỂN CÂU HỎI TRONG ĐỀ MINH HỌA THI TỐT NGHIỆP THPT ...
CHUYÊN ĐỀ ÔN TẬP VÀ PHÁT TRIỂN CÂU HỎI TRONG ĐỀ MINH HỌA THI TỐT NGHIỆP THPT ...
Accounting for Restricted Grants When and How To Record Properly
Accounting for Restricted Grants When and How To Record Properly
spot a liar (Haiqa 146).pptx Technical writhing and presentation skills
spot a liar (Haiqa 146).pptx Technical writhing and presentation skills
Leveraging Generative AI to Drive Nonprofit Innovation
Leveraging Generative AI to Drive Nonprofit Innovation
مصحف القراءات العشر أعد أحرف الخلاف سمير بسيوني.pdf
مصحف القراءات العشر أعد أحرف الخلاف سمير بسيوني.pdf
CapTechTalks Webinar Slides June 2024 Donovan Wright.pptx
CapTechTalks Webinar Slides June 2024 Donovan Wright.pptx
Juneteenth Freedom Day 2024 David Douglas School District
Juneteenth Freedom Day 2024 David Douglas School District
THE SACRIFICE HOW PRO-PALESTINE PROTESTS STUDENTS ARE SACRIFICING TO CHANGE T...
THE SACRIFICE HOW PRO-PALESTINE PROTESTS STUDENTS ARE SACRIFICING TO CHANGE T...
stemum hyoid 9- Match the following types of synovial joints to their.pdf
- 1. stemum hyoid 9. Match the following types of synovial joints to their descriptions. F spherical head in a round concavity (shoulderhip) a. plane/gliding joint rotational movement ("no" joint) b. hinge joint movement between two flat surfaces (intercarpal joint) c. pivot joint two concave surfaces (trapezium/metacarpal 1) 10 two concave surfaces (trapeziun d. ellipsoid/condyloid joint e. saddle joint movement in two planes (wrist) f. ball-and-socket join 10. Match the following movements with their descriptions. turning the soles of the feet medially a. flexion preventing movement in either direction b. extension K move in a superior direction (shrug shoulders) c. abduction medial rotation of the hands (forearm) d. adduction making the joint angle smaller (elbow) e. rotation movement of arms & legs away from the body f. supination movement in inferior direction (anti-shrug of shoulders) g. pronation making the joint angle larger (elbow) h. circumduction turning the soles of the feet laterally i. protraction lateral rotation of the hands (forearm) j. retmction horizontal movement in posterior direction (chin) k. elevation return of arms & legs back to anatomic position 1. depression h circular movement of a part of the body m. inversion horizontal movement in anterior direction (chin) n. eversion movement of the arm in a conical shape o. fixation