STC MTM programme.pdf
•
0 likes•5 views
The inaugural session of the STC on Electric Vehicle: Impact and Recent Advancement workshop took place from 11:00 AM to 11:25 AM on November 14th, 2022. The session included welcoming remarks, the lighting of the lamp ceremony, an overview of the workshop by the convener, introduction and special address of the guest of honor Prof. Karthick Atmanathan of IIT Madras, introduction of the chief guest Prof. L. K. Awasthi of NIT Uttarakhand, and the keynote address and vote of thanks.
Report
Share
Report
Share
Download to read offline
Recommended
Maglev windmill project report
This project of Maglev windmill on the implementation of an alternate configuration of a wind turbine for power generation purposes. Using the effects of magnetic repulsion, spiral shaped wind turbine blades will be fitted on a rod for stability during rotation and suspended on magnets as a replacement for ball bearings which are normally used on conventional wind turbines. Power will then be generated with an axial flux generator, which incorporates the use of permanent magnets and a set of coils.
Subscribe My Youtube Channel For More Support....
https://www.youtube.com/channel/UCjI2ahxNNvYRc1X5hQIE78A
Footstep power generation
This document describes a system for generating electricity from footstep power using a piezoelectric sensor and microcontroller. The system works by converting the downward force of a footstep on a plate into rotational motion of a shaft connected to a generator. When a person steps on the plate, the piezoelectric sensor produces electricity that is stored in a battery. The stored power can then be used for applications like street lights, fans, or security alarms. The system provides an alternative renewable energy source and has potential to harness wasted foot traffic energy in crowded areas.
course_brochure.pdf
The one-day HKIE – Electrical Division Symposium will take place on October 19, 2023 at the Sheraton Hotel and will focus on emerging technologies for sustainable development. The symposium will include sessions on sustainable development goals, AI applications, new power system technologies, and digital applications in construction. Speakers will discuss topics such as nuclear fusion, smart facility management using AI, photovoltaic forecasting models, smart grid technologies, microgrid implementation, environmentally friendly transformer oils, city data repositories, and unlocking digital power in the built environment. The event aims to provide a platform for professionals to exchange knowledge on utilizing emerging technologies to support sustainable development.
7373941 010-high-speed-solid-rotor-induction-motor
This document summarizes a thesis titled "High-Speed Solid-Rotor Induction Machine – Electromagnetic Calculation and Design". The thesis analyzes methods for improving the electromagnetic properties of a solid-rotor induction machine. It develops an analytical calculation method for axially slitted solid rotors equipped with end rings. Finite element analysis and laboratory measurements are used to verify the results. Prototypes from 250-1000 kW and 140-12000 rpm were tested, showing the utilization factor for different designs. The research aims to enable the efficient use of solid-rotor induction machines for high-speed applications.
Footstep power generation system
This document is a thesis submitted by Adarsha Pattnayak for the partial fulfillment of a diploma in electrical engineering. It proposes a footstep power generation system that uses piezoelectric sensors to convert the mechanical energy from footsteps into electrical energy. When pressure is applied to the piezoelectric sensors, an alternating current voltage is generated. This voltage is then rectified using a diode bridge to convert it to direct current, which is stored in a capacitor. The stored electrical energy can then be used to power small devices or supplement other power sources. The system aims to harness wasted footstep energy in crowded public places to generate electricity.
SCONEST'16 Program schedule sconest v1.15 [2131]
The document provides the program schedule for the Student Conference on Engineering Sciences and Technology (SCONEST 2016) with the following details:
SCONEST 2016 is a national student conference organized by the IEEE Karachi Section since 2002 that provides a platform for students to network, discuss, and present their work. The two-day event includes inaugural and closing ceremonies with guest speakers, as well as technical sessions on both days with paper presentations divided into rooms and topics. Sessions cover both undergraduate and postgraduate works on engineering and technology topics. The schedule provides timing, speakers, and paper details for each session.
My report part 1
This document is a seminar report submitted by Shanu Sharma to the Department of Electrical Engineering at Global Institute of Technology in Jaipur, India. The report analyzes the results of using solar botanic trees and nano piezoelectric elements as a renewable energy source. Solar botanic trees could generate electricity from wind and rainfall using thousands of nano-leaves coated with piezoelectric elements. As the leaves flap in the wind or rain, they produce millions of picowatts of electricity. The report includes sections on acknowledgments, figures, and chapters discussing various power semiconductor devices relevant to renewable energy technologies.
BioData-Sh Jaideep Gupta-CELE
This document is a curriculum vitae for Dr. Jaideep Gupta, who works as the Chief Electrical Engineer (Loco) for the Indian Railway Service of Electrical Engineers. He has over 28 years of experience working in various management roles across several divisions of Indian Railways. He has received commendations for his work on locomotive maintenance and for promoting the use of Rajbhasha. The CV lists his educational qualifications, publications, training programs attended, conferences participated in, and personal details.
Recommended
Maglev windmill project report
This project of Maglev windmill on the implementation of an alternate configuration of a wind turbine for power generation purposes. Using the effects of magnetic repulsion, spiral shaped wind turbine blades will be fitted on a rod for stability during rotation and suspended on magnets as a replacement for ball bearings which are normally used on conventional wind turbines. Power will then be generated with an axial flux generator, which incorporates the use of permanent magnets and a set of coils.
Subscribe My Youtube Channel For More Support....
https://www.youtube.com/channel/UCjI2ahxNNvYRc1X5hQIE78A
Footstep power generation
This document describes a system for generating electricity from footstep power using a piezoelectric sensor and microcontroller. The system works by converting the downward force of a footstep on a plate into rotational motion of a shaft connected to a generator. When a person steps on the plate, the piezoelectric sensor produces electricity that is stored in a battery. The stored power can then be used for applications like street lights, fans, or security alarms. The system provides an alternative renewable energy source and has potential to harness wasted foot traffic energy in crowded areas.
course_brochure.pdf
The one-day HKIE – Electrical Division Symposium will take place on October 19, 2023 at the Sheraton Hotel and will focus on emerging technologies for sustainable development. The symposium will include sessions on sustainable development goals, AI applications, new power system technologies, and digital applications in construction. Speakers will discuss topics such as nuclear fusion, smart facility management using AI, photovoltaic forecasting models, smart grid technologies, microgrid implementation, environmentally friendly transformer oils, city data repositories, and unlocking digital power in the built environment. The event aims to provide a platform for professionals to exchange knowledge on utilizing emerging technologies to support sustainable development.
7373941 010-high-speed-solid-rotor-induction-motor
This document summarizes a thesis titled "High-Speed Solid-Rotor Induction Machine – Electromagnetic Calculation and Design". The thesis analyzes methods for improving the electromagnetic properties of a solid-rotor induction machine. It develops an analytical calculation method for axially slitted solid rotors equipped with end rings. Finite element analysis and laboratory measurements are used to verify the results. Prototypes from 250-1000 kW and 140-12000 rpm were tested, showing the utilization factor for different designs. The research aims to enable the efficient use of solid-rotor induction machines for high-speed applications.
Footstep power generation system
This document is a thesis submitted by Adarsha Pattnayak for the partial fulfillment of a diploma in electrical engineering. It proposes a footstep power generation system that uses piezoelectric sensors to convert the mechanical energy from footsteps into electrical energy. When pressure is applied to the piezoelectric sensors, an alternating current voltage is generated. This voltage is then rectified using a diode bridge to convert it to direct current, which is stored in a capacitor. The stored electrical energy can then be used to power small devices or supplement other power sources. The system aims to harness wasted footstep energy in crowded public places to generate electricity.
SCONEST'16 Program schedule sconest v1.15 [2131]
The document provides the program schedule for the Student Conference on Engineering Sciences and Technology (SCONEST 2016) with the following details:
SCONEST 2016 is a national student conference organized by the IEEE Karachi Section since 2002 that provides a platform for students to network, discuss, and present their work. The two-day event includes inaugural and closing ceremonies with guest speakers, as well as technical sessions on both days with paper presentations divided into rooms and topics. Sessions cover both undergraduate and postgraduate works on engineering and technology topics. The schedule provides timing, speakers, and paper details for each session.
My report part 1
This document is a seminar report submitted by Shanu Sharma to the Department of Electrical Engineering at Global Institute of Technology in Jaipur, India. The report analyzes the results of using solar botanic trees and nano piezoelectric elements as a renewable energy source. Solar botanic trees could generate electricity from wind and rainfall using thousands of nano-leaves coated with piezoelectric elements. As the leaves flap in the wind or rain, they produce millions of picowatts of electricity. The report includes sections on acknowledgments, figures, and chapters discussing various power semiconductor devices relevant to renewable energy technologies.
BioData-Sh Jaideep Gupta-CELE
This document is a curriculum vitae for Dr. Jaideep Gupta, who works as the Chief Electrical Engineer (Loco) for the Indian Railway Service of Electrical Engineers. He has over 28 years of experience working in various management roles across several divisions of Indian Railways. He has received commendations for his work on locomotive maintenance and for promoting the use of Rajbhasha. The CV lists his educational qualifications, publications, training programs attended, conferences participated in, and personal details.
14 atce conference_preview
The document provides information about the Society of Petroleum Engineers Annual Technical Conference and Exhibition (ATCE) that will take place from 27-29 October 2014 in Amsterdam, Netherlands. It summarizes that the ATCE is the flagship meeting of the SPE and will showcase new oil and gas technologies and practices. It also lists the technical sessions, training courses, and networking opportunities available to thousands of attendees from the oil and gas industry.
Elgine upper prasentation copy
This presentation outlines two hydropower projects in progress - the Elgin MHP and Upper Waltrim MHP. It discusses the site locations, required approvals that have been obtained, technical specifications of the projects including layouts, equipment to be used, and cost estimates. The presentation seeks confirmation of equity partners for the projects and notes that debt financing is being negotiated. It concludes by outlining next steps that include completing the approval process, conducting an audit, and finalizing the tariff rates and tax regime before formally launching project activities.
PMAI PM24 International Conference Program Schedule
This document outlines the tentative technical program structure for the International Conference on Powder Metallurgy & Particulate Materials + Exhibition 2024 (PMAI-PM 24), which will take place from February 25-27, 2024 in Pune, India. The conference will include plenary lectures, invited talks, oral presentations, and poster sessions covering topics such as powder metallurgy, battery materials, materials for emerging applications, powder production, modelling and simulation, and waste management. Social events include an inaugural ceremony, felicitation event, cultural program, and dinner gatherings. The program provides timing details for each session and lists speakers and presentation topics.
final
This document describes a stair step power generation project presented by students. It discusses using the kinetic energy from human footsteps on stairs to power small electrical devices. The system works by converting the up and down motion of footsteps into rotational energy to turn a dynamo and generate electricity. It has advantages of being easy to construct, storing energy, and providing power independently without other energy sources or weather dependence. The document outlines the background, principles, construction, working, applications and advantages of the stair step power generation system.
PM 24: TENTATIVE TECHNICAL PROGRAM STRUCTURE
This document outlines the tentative technical program structure for the International Conference on Powder Metallurgy & Particulate Materials + Exhibition 2024 (PMAI-PM 24), which will take place from February 25-27, 2024 in Pune, India. The conference is the golden jubilee event of PMAI. The program includes plenary lectures, invited talks, oral presentations, and poster sessions covering topics like powder production, press and sinter, battery materials, materials for emerging applications, and modelling and simulation. Social events like an inaugural ceremony, felicitation event, and dinners are also scheduled.
7th Power & Electricity Conference
This document provides an agenda and overview for the Indonesia Power Conference happening from October 18-20, 2016 in Jakarta, Indonesia. The conference will feature discussions on developing Indonesia's energy sector including updating the national energy strategy, power generation projects, electricity tariffs, and renewable energy infrastructure. Speakers will represent the Indonesian government as well as energy companies involved in projects for coal, gas, geothermal, hydro, biomass and solar power. Panel topics will include meeting Indonesia's growing energy demands, evaluating investment opportunities, and strategies for sustainable growth in Indonesia's energy market.
Resume_Vijayakumar M
This document is a curriculum vitae for Vijayakumar M, a Substation Testing and Commissioning Engineer. It summarizes his professional experience testing and commissioning substations up to 765kV as a senior engineer in India and Qatar. It also lists his technical skills, test kits handled, and notable projects in India and Qatar with Digital Energy and Larsen & Toubro testing various substations up to 220kV.
Footstep power generation system Final year be project
This project report summarizes a footstep power generation system developed by two students, Pankaj m mori and Sachin k dhakad. The report describes the design and implementation of a system that uses piezoelectric sensors to convert the mechanical energy from human footsteps into electrical energy. It provides details on the components used, including piezoelectric sensors, a rectifier, capacitor, and voltage meter. The report also discusses how piezoelectric materials generate voltage when pressure is applied and the various applications of such a footstep power generation system.
Power Quality-Report
This document is a study report on applying power electronics in electricity distribution systems to improve power quality. It was prepared by the Power Quality Study Team of the Engineering Department of NTPC Electric Supply Company Limited. The report defines various power quality issues like voltage sags, swells, interruptions, harmonics etc. It then discusses various power electronic solutions that can be used to mitigate these issues, including distribution static VAR compensators (D-SVC), distribution static synchronous compensators (D-STATCOM), and dynamic voltage restorers (DVR). Finally, it presents three case studies analyzing power quality measurements taken at different distribution systems to identify existing power quality problems.
Power Quality-Report-5
The document is a study report on applying power electronics in electricity distribution systems to improve power quality. It discusses power quality issues like voltage sags, swells, interruptions and harmonics. It also describes various power electronic solutions that can be used, including Distribution Static VAR Compensators (D-SVC), Distribution Static Synchronous Compensators (D-STATCOM), and Dynamic Voltage Restorers (DVR). The report presents case studies of power quality measurements conducted at three different industries to analyze existing power quality issues. It provides recommendations and conclusions on improving power quality using power electronics.
Annual report of activities of IEEE Malabar subsection 2014
Activities of IEEE Malabar subsection in 2014 reported by Secretary Nandakumar R in the AGM 21st Dec at N I T Calicut. A glorious year of professional activities.
uploaded by Prof K P Mohandas
Physics report-12.pdfdddddddddddddddddddddddddddddddddddddddddddddd
This document is a report submitted by Brisa Ghimire on a project about wireless power transmission. It includes sections on the objective of investigating wireless power transfer technology, an abstract describing inductive power transfer principles, requirements for building a demonstration device, the theoretical concepts of electromagnetic induction, how a prototype device works, experimental observations of powering an LED, conclusions about the potential for wireless charging applications, and a bibliography of references consulted.
power generation through speed breaker
This document presents a seminar report on generating power through speed breakers. It discusses using the kinetic energy of vehicles passing over speed breakers to power generators through various mechanisms like rack-pinion systems or piezoelectric materials. The report acknowledges faculty guidance and provides an abstract on addressing India's electricity crisis by utilizing wasted energy from speed breakers. It then details the operating principles, results and advantages of different power generation designs, such as producing 0.98 kW from 100 vehicles passing per minute. The conclusion is that speed breaker power generation will be a more efficient and economical alternative energy source in the future.
Mahindra Tech Symposium 2024 - Mahindra Rearch Valley , Chennai
Annual #Tech #Symposium - this week (16 - 18 Feb) at the Abdul Kalam Auditorium at Mahindra Research valley (hashtag#MRV). This year's focus is on#EV.
We have #Global #EV hashtag#Experts speaking at the Symposium. Watch this space for more information on Speakers.
Conference chairs Dr. Vinodh Mewani PhD and Subash C
green noise or production of electricity from noise or sound
Sukhvinder Singh gave a seminar on converting sound energy to electrical energy, or "green noise". He discussed three main methods: using a diaphragm that fluctuates in response to sound waves and generates electricity; converting sound energy to heat energy and then to electrical energy; and using piezoelectric transducers that generate electricity when deformed by sound waves. While this conversion of sound energy could help address energy scarcity and reduce noise pollution, the technology still has low efficiency and requires further improvements.
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 9 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2024-2025 - ...
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 9 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2024-2025 - ...Nguyen Thanh Tu Collection
https://app.box.com/s/tacvl9ekroe9hqupdnjruiypvm9rdaneGender and Mental Health - Counselling and Family Therapy Applications and In...
A proprietary approach developed by bringing together the best of learning theories from Psychology, design principles from the world of visualization, and pedagogical methods from over a decade of training experience, that enables you to: Learn better, faster!
How Barcodes Can Be Leveraged Within Odoo 17
In this presentation, we will explore how barcodes can be leveraged within Odoo 17 to streamline our manufacturing processes. We will cover the configuration steps, how to utilize barcodes in different manufacturing scenarios, and the overall benefits of implementing this technology.
Level 3 NCEA - NZ: A Nation In the Making 1872 - 1900 SML.ppt
The History of NZ 1870-1900.
Making of a Nation.
From the NZ Wars to Liberals,
Richard Seddon, George Grey,
Social Laboratory, New Zealand,
Confiscations, Kotahitanga, Kingitanga, Parliament, Suffrage, Repudiation, Economic Change, Agriculture, Gold Mining, Timber, Flax, Sheep, Dairying,
Bossa N’ Roll Records by Ismael Vazquez.
Bossa N Roll Records presentation by Izzy Vazquez for Music Retail and Distribution class at Full Sail University
More Related Content
Similar to STC MTM programme.pdf
14 atce conference_preview
The document provides information about the Society of Petroleum Engineers Annual Technical Conference and Exhibition (ATCE) that will take place from 27-29 October 2014 in Amsterdam, Netherlands. It summarizes that the ATCE is the flagship meeting of the SPE and will showcase new oil and gas technologies and practices. It also lists the technical sessions, training courses, and networking opportunities available to thousands of attendees from the oil and gas industry.
Elgine upper prasentation copy
This presentation outlines two hydropower projects in progress - the Elgin MHP and Upper Waltrim MHP. It discusses the site locations, required approvals that have been obtained, technical specifications of the projects including layouts, equipment to be used, and cost estimates. The presentation seeks confirmation of equity partners for the projects and notes that debt financing is being negotiated. It concludes by outlining next steps that include completing the approval process, conducting an audit, and finalizing the tariff rates and tax regime before formally launching project activities.
PMAI PM24 International Conference Program Schedule
This document outlines the tentative technical program structure for the International Conference on Powder Metallurgy & Particulate Materials + Exhibition 2024 (PMAI-PM 24), which will take place from February 25-27, 2024 in Pune, India. The conference will include plenary lectures, invited talks, oral presentations, and poster sessions covering topics such as powder metallurgy, battery materials, materials for emerging applications, powder production, modelling and simulation, and waste management. Social events include an inaugural ceremony, felicitation event, cultural program, and dinner gatherings. The program provides timing details for each session and lists speakers and presentation topics.
final
This document describes a stair step power generation project presented by students. It discusses using the kinetic energy from human footsteps on stairs to power small electrical devices. The system works by converting the up and down motion of footsteps into rotational energy to turn a dynamo and generate electricity. It has advantages of being easy to construct, storing energy, and providing power independently without other energy sources or weather dependence. The document outlines the background, principles, construction, working, applications and advantages of the stair step power generation system.
PM 24: TENTATIVE TECHNICAL PROGRAM STRUCTURE
This document outlines the tentative technical program structure for the International Conference on Powder Metallurgy & Particulate Materials + Exhibition 2024 (PMAI-PM 24), which will take place from February 25-27, 2024 in Pune, India. The conference is the golden jubilee event of PMAI. The program includes plenary lectures, invited talks, oral presentations, and poster sessions covering topics like powder production, press and sinter, battery materials, materials for emerging applications, and modelling and simulation. Social events like an inaugural ceremony, felicitation event, and dinners are also scheduled.
7th Power & Electricity Conference
This document provides an agenda and overview for the Indonesia Power Conference happening from October 18-20, 2016 in Jakarta, Indonesia. The conference will feature discussions on developing Indonesia's energy sector including updating the national energy strategy, power generation projects, electricity tariffs, and renewable energy infrastructure. Speakers will represent the Indonesian government as well as energy companies involved in projects for coal, gas, geothermal, hydro, biomass and solar power. Panel topics will include meeting Indonesia's growing energy demands, evaluating investment opportunities, and strategies for sustainable growth in Indonesia's energy market.
Resume_Vijayakumar M
This document is a curriculum vitae for Vijayakumar M, a Substation Testing and Commissioning Engineer. It summarizes his professional experience testing and commissioning substations up to 765kV as a senior engineer in India and Qatar. It also lists his technical skills, test kits handled, and notable projects in India and Qatar with Digital Energy and Larsen & Toubro testing various substations up to 220kV.
Footstep power generation system Final year be project
This project report summarizes a footstep power generation system developed by two students, Pankaj m mori and Sachin k dhakad. The report describes the design and implementation of a system that uses piezoelectric sensors to convert the mechanical energy from human footsteps into electrical energy. It provides details on the components used, including piezoelectric sensors, a rectifier, capacitor, and voltage meter. The report also discusses how piezoelectric materials generate voltage when pressure is applied and the various applications of such a footstep power generation system.
Power Quality-Report
This document is a study report on applying power electronics in electricity distribution systems to improve power quality. It was prepared by the Power Quality Study Team of the Engineering Department of NTPC Electric Supply Company Limited. The report defines various power quality issues like voltage sags, swells, interruptions, harmonics etc. It then discusses various power electronic solutions that can be used to mitigate these issues, including distribution static VAR compensators (D-SVC), distribution static synchronous compensators (D-STATCOM), and dynamic voltage restorers (DVR). Finally, it presents three case studies analyzing power quality measurements taken at different distribution systems to identify existing power quality problems.
Power Quality-Report-5
The document is a study report on applying power electronics in electricity distribution systems to improve power quality. It discusses power quality issues like voltage sags, swells, interruptions and harmonics. It also describes various power electronic solutions that can be used, including Distribution Static VAR Compensators (D-SVC), Distribution Static Synchronous Compensators (D-STATCOM), and Dynamic Voltage Restorers (DVR). The report presents case studies of power quality measurements conducted at three different industries to analyze existing power quality issues. It provides recommendations and conclusions on improving power quality using power electronics.
Annual report of activities of IEEE Malabar subsection 2014
Activities of IEEE Malabar subsection in 2014 reported by Secretary Nandakumar R in the AGM 21st Dec at N I T Calicut. A glorious year of professional activities.
uploaded by Prof K P Mohandas
Physics report-12.pdfdddddddddddddddddddddddddddddddddddddddddddddd
This document is a report submitted by Brisa Ghimire on a project about wireless power transmission. It includes sections on the objective of investigating wireless power transfer technology, an abstract describing inductive power transfer principles, requirements for building a demonstration device, the theoretical concepts of electromagnetic induction, how a prototype device works, experimental observations of powering an LED, conclusions about the potential for wireless charging applications, and a bibliography of references consulted.
power generation through speed breaker
This document presents a seminar report on generating power through speed breakers. It discusses using the kinetic energy of vehicles passing over speed breakers to power generators through various mechanisms like rack-pinion systems or piezoelectric materials. The report acknowledges faculty guidance and provides an abstract on addressing India's electricity crisis by utilizing wasted energy from speed breakers. It then details the operating principles, results and advantages of different power generation designs, such as producing 0.98 kW from 100 vehicles passing per minute. The conclusion is that speed breaker power generation will be a more efficient and economical alternative energy source in the future.
Mahindra Tech Symposium 2024 - Mahindra Rearch Valley , Chennai
Annual #Tech #Symposium - this week (16 - 18 Feb) at the Abdul Kalam Auditorium at Mahindra Research valley (hashtag#MRV). This year's focus is on#EV.
We have #Global #EV hashtag#Experts speaking at the Symposium. Watch this space for more information on Speakers.
Conference chairs Dr. Vinodh Mewani PhD and Subash C
green noise or production of electricity from noise or sound
Sukhvinder Singh gave a seminar on converting sound energy to electrical energy, or "green noise". He discussed three main methods: using a diaphragm that fluctuates in response to sound waves and generates electricity; converting sound energy to heat energy and then to electrical energy; and using piezoelectric transducers that generate electricity when deformed by sound waves. While this conversion of sound energy could help address energy scarcity and reduce noise pollution, the technology still has low efficiency and requires further improvements.
Similar to STC MTM programme.pdf (15)
PMAI PM24 International Conference Program Schedule
PMAI PM24 International Conference Program Schedule
Footstep power generation system Final year be project
Footstep power generation system Final year be project
Annual report of activities of IEEE Malabar subsection 2014
Annual report of activities of IEEE Malabar subsection 2014
Physics report-12.pdfdddddddddddddddddddddddddddddddddddddddddddddd
Physics report-12.pdfdddddddddddddddddddddddddddddddddddddddddddddd
Mahindra Tech Symposium 2024 - Mahindra Rearch Valley , Chennai
Mahindra Tech Symposium 2024 - Mahindra Rearch Valley , Chennai
green noise or production of electricity from noise or sound
green noise or production of electricity from noise or sound
Recently uploaded
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 9 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2024-2025 - ...
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 9 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2024-2025 - ...Nguyen Thanh Tu Collection
https://app.box.com/s/tacvl9ekroe9hqupdnjruiypvm9rdaneGender and Mental Health - Counselling and Family Therapy Applications and In...
A proprietary approach developed by bringing together the best of learning theories from Psychology, design principles from the world of visualization, and pedagogical methods from over a decade of training experience, that enables you to: Learn better, faster!
How Barcodes Can Be Leveraged Within Odoo 17
In this presentation, we will explore how barcodes can be leveraged within Odoo 17 to streamline our manufacturing processes. We will cover the configuration steps, how to utilize barcodes in different manufacturing scenarios, and the overall benefits of implementing this technology.
Level 3 NCEA - NZ: A Nation In the Making 1872 - 1900 SML.ppt
The History of NZ 1870-1900.
Making of a Nation.
From the NZ Wars to Liberals,
Richard Seddon, George Grey,
Social Laboratory, New Zealand,
Confiscations, Kotahitanga, Kingitanga, Parliament, Suffrage, Repudiation, Economic Change, Agriculture, Gold Mining, Timber, Flax, Sheep, Dairying,
Bossa N’ Roll Records by Ismael Vazquez.
Bossa N Roll Records presentation by Izzy Vazquez for Music Retail and Distribution class at Full Sail University
Andreas Schleicher presents PISA 2022 Volume III - Creative Thinking - 18 Jun...
Andreas Schleicher, Director of Education and Skills at the OECD presents at the launch of PISA 2022 Volume III - Creative Minds, Creative Schools on 18 June 2024.
A Visual Guide to 1 Samuel | A Tale of Two Hearts
These slides walk through the story of 1 Samuel. Samuel is the last judge of Israel. The people reject God and want a king. Saul is anointed as the first king, but he is not a good king. David, the shepherd boy is anointed and Saul is envious of him. David shows honor while Saul continues to self destruct.
Wound healing PPT
This document provides an overview of wound healing, its functions, stages, mechanisms, factors affecting it, and complications.
A wound is a break in the integrity of the skin or tissues, which may be associated with disruption of the structure and function.
Healing is the body’s response to injury in an attempt to restore normal structure and functions.
Healing can occur in two ways: Regeneration and Repair
There are 4 phases of wound healing: hemostasis, inflammation, proliferation, and remodeling. This document also describes the mechanism of wound healing. Factors that affect healing include infection, uncontrolled diabetes, poor nutrition, age, anemia, the presence of foreign bodies, etc.
Complications of wound healing like infection, hyperpigmentation of scar, contractures, and keloid formation.
Benner "Expanding Pathways to Publishing Careers"
This presentation was provided by Rebecca Benner, Ph.D., of the American Society of Anesthesiologists, for the second session of NISO's 2024 Training Series "DEIA in the Scholarly Landscape." Session Two: 'Expanding Pathways to Publishing Careers,' was held June 13, 2024.
CHUYÊN ĐỀ ÔN TẬP VÀ PHÁT TRIỂN CÂU HỎI TRONG ĐỀ MINH HỌA THI TỐT NGHIỆP THPT ...
CHUYÊN ĐỀ ÔN TẬP VÀ PHÁT TRIỂN CÂU HỎI TRONG ĐỀ MINH HỌA THI TỐT NGHIỆP THPT ...Nguyen Thanh Tu Collection
https://app.box.com/s/qspvswamcohjtbvbbhjad04lg65waylfGeography as a Discipline Chapter 1 __ Class 11 Geography NCERT _ Class Notes...
Geography as discipline
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 8 - CẢ NĂM - FRIENDS PLUS - NĂM HỌC 2023-2024 (B...
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 8 - CẢ NĂM - FRIENDS PLUS - NĂM HỌC 2023-2024 (B...Nguyen Thanh Tu Collection
https://app.box.com/s/nrwz52lilmrw6m5kqeqn83q6vbdp8yzpLeveraging Generative AI to Drive Nonprofit Innovation
In this webinar, participants learned how to utilize Generative AI to streamline operations and elevate member engagement. Amazon Web Service experts provided a customer specific use cases and dived into low/no-code tools that are quick and easy to deploy through Amazon Web Service (AWS.)
skeleton System.pdf (skeleton system wow)
🔥🔥🔥🔥🔥🔥🔥🔥🔥
إضغ بين إيديكم من أقوى الملازم التي صممتها
ملزمة تشريح الجهاز الهيكلي (نظري 3)
💀💀💀💀💀💀💀💀💀💀
تتميز هذهِ الملزمة بعِدة مُميزات :
1- مُترجمة ترجمة تُناسب جميع المستويات
2- تحتوي على 78 رسم توضيحي لكل كلمة موجودة بالملزمة (لكل كلمة !!!!)
#فهم_ماكو_درخ
3- دقة الكتابة والصور عالية جداً جداً جداً
4- هُنالك بعض المعلومات تم توضيحها بشكل تفصيلي جداً (تُعتبر لدى الطالب أو الطالبة بإنها معلومات مُبهمة ومع ذلك تم توضيح هذهِ المعلومات المُبهمة بشكل تفصيلي جداً
5- الملزمة تشرح نفسها ب نفسها بس تكلك تعال اقراني
6- تحتوي الملزمة في اول سلايد على خارطة تتضمن جميع تفرُعات معلومات الجهاز الهيكلي المذكورة في هذهِ الملزمة
واخيراً هذهِ الملزمة حلالٌ عليكم وإتمنى منكم إن تدعولي بالخير والصحة والعافية فقط
كل التوفيق زملائي وزميلاتي ، زميلكم محمد الذهبي 💊💊
🔥🔥🔥🔥🔥🔥🔥🔥🔥
BIOLOGY NATIONAL EXAMINATION COUNCIL (NECO) 2024 PRACTICAL MANUAL.pptx
Practical manual for National Examination Council, Nigeria.
Contains guides on answering questions on the specimens provided
Recently uploaded (20)
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 9 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2024-2025 - ...
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 9 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2024-2025 - ...
Gender and Mental Health - Counselling and Family Therapy Applications and In...
Gender and Mental Health - Counselling and Family Therapy Applications and In...
Level 3 NCEA - NZ: A Nation In the Making 1872 - 1900 SML.ppt
Level 3 NCEA - NZ: A Nation In the Making 1872 - 1900 SML.ppt
Andreas Schleicher presents PISA 2022 Volume III - Creative Thinking - 18 Jun...
Andreas Schleicher presents PISA 2022 Volume III - Creative Thinking - 18 Jun...
CHUYÊN ĐỀ ÔN TẬP VÀ PHÁT TRIỂN CÂU HỎI TRONG ĐỀ MINH HỌA THI TỐT NGHIỆP THPT ...
CHUYÊN ĐỀ ÔN TẬP VÀ PHÁT TRIỂN CÂU HỎI TRONG ĐỀ MINH HỌA THI TỐT NGHIỆP THPT ...
Geography as a Discipline Chapter 1 __ Class 11 Geography NCERT _ Class Notes...
Geography as a Discipline Chapter 1 __ Class 11 Geography NCERT _ Class Notes...
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 8 - CẢ NĂM - FRIENDS PLUS - NĂM HỌC 2023-2024 (B...
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 8 - CẢ NĂM - FRIENDS PLUS - NĂM HỌC 2023-2024 (B...
Leveraging Generative AI to Drive Nonprofit Innovation
Leveraging Generative AI to Drive Nonprofit Innovation
NEWSPAPERS - QUESTION 1 - REVISION POWERPOINT.pptx
NEWSPAPERS - QUESTION 1 - REVISION POWERPOINT.pptx
BIOLOGY NATIONAL EXAMINATION COUNCIL (NECO) 2024 PRACTICAL MANUAL.pptx
BIOLOGY NATIONAL EXAMINATION COUNCIL (NECO) 2024 PRACTICAL MANUAL.pptx
STC MTM programme.pdf
- 1. Inaugural Session: Minute to Minute Program (14th Nov, 2022) (14th Nov - 18th Nov, 2022) STC on Electric Vehicle: Impact and Recent Advancement 11:00 AM - 11:03 AM Welcome to the Chief Guest, Prof. L. K. Awasthi, Hon’ble Director, NIT, Uttarakhand, Guest of Honour, Prof. Karthick Atmanathan, Professor of Practice, IIT Madras and Participants 11:03 AM - 11:05 AM Lightening of Lamp by the Hon’ble Chief Guest and Dignitaries 11:05 AM - 11:18 AM Overview of Workshop by Convener 11:08 AM - 11:10 AM Introduction of the Guest of Honour, Prof. Karthick Atmanathan, Professor of Practice, IIT Madras 11:10 AM - 11:15 AM Special Address by Mr. Karthick Atmanathan, Prof. Karthick Atmanathan, Professor of Practice, IIT Madras 11:15 AM - 11:17 AM Introduction of Chief Guest, Prof. L. K. Awasthi, Director, NIT Uttarakhand 11:17 AM - 11:22 AM Keynote Address by Chief Guest, Prof. L. K. Awasthi, Director, NIT Uttarakhand 11:22 AM - 11:25 AM Vote of Thanks by Coordinator